Basic Car Animation in Blender [Quick & Easy!]

[@froggo5675]

ME TOO! IVE ALWAYS WANTED TO DO A CAR ANIM. THANK YOU TAHNK OYU THANK YOU!!!!!!!!!!!

[@KaizenTutorials]

Yeaaaah! And with this method it's so easy to get great looking results. :-D

[@samueladekunle8189]

What’s the name of the app used That’s what i don’t know

[@KaizenTutorials]

The software? blender!

[@gonzalocarreteromartinez5046]

For those using Blender 4.0+: The expression on the wheel's driver should be "tan(-var)", rather than just "-var"

[@KaizenTutorials]

Yoo thanks for keeping people informed!

[@MrFishyCC]

Thanks

[@brixbuildz]

Crazy how realistic it is! I’m trying this as soon as possible!

[@aayushdoshi]

thank you so much bro u helped me a lot for a thing in which I was stuck for 4 hourss !! loved it !!

[@DarkSwordsman]

Just a note: In the "View" panel, you can check the option to lock the camera to the view. It allows you to use the normal viewport controls to move the camera around and I find it *way* easier to do than trying to manually move the camera around.

[@KaizenTutorials]

Good one! I use it often, but sometimes you get more control with the regular tools I think.

[@ksacdesigns]

@@KaizenTutorialsif the car has camber wheels is there any way to make it work I can not get it to work without wobbling no matter what I try. I can set it so the local is set to a plane on each wheel and that will work to animate it but I can get it to work with driver no matter what I try thanks

[@spearcy]

That was a lot of good Blender info for a 10-minute vid!

[@KaizenTutorials]

Thank you very much!

[@ajoo-g923]

THANKS A LOT SIR , IVE BEEN CHECKING KZbin TRYIN TO FIND HOW TO DO A CAR ANIMATION EASIEST AND QUICKEST WAY, THNX A LOT SIR , APPRECIATE IT

[@KaizenTutorials]

Glad you like it! Thanks!

[@isekaiexpress9450]

Great tutorial, thank you! I added a suspension effect to assign the wheels and the body to two different empties.

[@KaizenTutorials]

Thanks! And nice work, thatll add a lot of extra realism

[@AliAbbas-vr6cf]

I love car animations sir your so good boy I like this channel I am fane this channel I love love this channel my favorite channel thank you so much

[@KaizenTutorials]

Thanks a lot, appreciate the kind words!

[@christopherwatson157]

I bet if you were to animate the rotation of the HDRI to coincide with your beginning and ending keyframes it would help sell the look even more. Great Video !! Going to use what I learned here a lot - Liked and subscribed.

[@KaizenTutorials]

That’s definitely a nice addition to add some extra motion! Thanks for the sub 💪🏻

[@baetao5383]

Amazing tutorial, no words! Awesome man! Thanks

[@KaizenTutorials]

Thank you and glad you like it!

[@3dmonkeybizz]

What an awesome video and tutorial. Makes you stop and think before buying one of those "ready made" add ons! Very many thanks!

[@KaizenTutorials]

Thanks a lot!

[@charanathenuka3423]

I learned a lot of things from your video. Thank You very much!

[@KaizenTutorials]

Glad I could help!

[@someshsahu4638]

Very nice explanation thankyou so much 🙏🏼🙏🏼🙏🏼 you solved my problem

[@KaizenTutorials]

Happy to hear that 👌🏻

[@purplevoice189]

This tutorial was so great thanks man

[@KaizenTutorials]

Thank you, you’re very welcome 🙌🏻

[@laxsurfer16]

Great tutorial! Easy to follow along and the result looks awesome. Thank you!

[@KaizenTutorials]

Thank you! Cheers!

[@itzduckes]

Thanks for the tutorial! Really helpful on my Car commercial custom car lol

[@KaizenTutorials]

Glad it helped!

[@bluuesnapper]

Yess! I made my first good driving animation haha,thank you for tutorial!

[@KaizenTutorials]

Glad I could help!

[@Awakenbeing]

so power packed information in one go.

[@KaizenTutorials]

Thanks!

[@mutedlion74]

Exactly what I was looking for…

[@KaizenTutorials]

Awesome! 💪🏻

[@jacko_o]

thankyou very much, your content helped me so much

[@KaizenTutorials]

Happy to hear that!

[@zainshumsy]

made it ! tanks bro. loved the whole tutorial

[@harrysonjohn1862]

Bro please make more video like that about car blenders....... We really need this

[@KaizenTutorials]

Thank you! I will definitely consider it 🙌

[@ThinkerYT]

Holy moly thanks

[@nigellill3222]

Great tutorial as always. I love car animations, they always look good when they're done right. Question: I know you said this was a basic car animation but in a situation where the car changes direction I presume you would have to alter the code for the rotation of the wheels if you're going from a y to x axis ? or even the z axis if it's going over a hill ? Love your work 👍🦘

[@KaizenTutorials]

Thanks again Nigel! Yeah you’re absolutely right. This ‘rig’, if you will, is only usable to go forward. You can add in rotation on the Z axis, depending on the movement on the X location however. So you could add basic ‘turns’ as such. It is very limited though and if you want to do more ‘advanced’ movement with cars it would be better to just use the car rigger add-on to generate fancy rigs which will allow you to do all the natural car movements. The add-on is free btw, but i’m not sure exactly what it’s called. But Google is your friend ;-)

[@nigellill3222]

@@KaizenTutorials Thanks for the info. I didn't know there is a car rig addon, i'll look into that. Cheers 👍

[@fullyleaded]

Hi, Awesome tutorial. So glad that you rig the wheels yourself and not just use the popular add-on to do all the fun work. I was just wondering, you add a constraint to the car to follow the empty but you parent the wheels to empty. Why not parent the car to the empty?

[@KaizenTutorials]

Thank you! Glad you like it. I suppose parenting the car to the empty would work fine overall, but it gives less flexibility. Since the constraint gives you an 'influence' parameter, which could enable you to get better control over things like the car body bouncing around (due to suspension etc). I guess for this specific result both options would result in the same. It just shows another approach to 'linking'' together parts I suppose! 👍

[@amoghagrawal1]

Wow 🤩 This animation looks polished and good tutorial too. I needed some help, when I import the car model, it looks all black and all the materials are black, I checked it in the shader editor and I see that all the different nodes have a grey BSDF and the normal map is put into the Normal socket and the color in the normal map is a purple tone. One thing to note is that the Principled BSDF is put into the surface output of the material output node. So, I am not able to troubleshoot the issue

[@KaizenTutorials]

Thanks a lot! Yeah, this is somehow an issue with the model. You will have to fix this manually, sadly. You can do this by just deleting the Principled BSDF node for every material and replacing it with a new one. I have no idea WHY this works, but it does. Good luck!

[@amoghagrawal1]

@@KaizenTutorialsOk thanks I will try that also there are like no image textures or roughness values that I need to keep in mind. Its just a BSDF node and a Normal Map. So can you share a screenshot of anyone material that you did?

[@KaizenTutorials]

I've made some screenshots for you. Here you can see how I set it up. It's very basic, but it works. imgur.com/a/kEGyqAh

[@amoghagrawal1]

@@KaizenTutorialsThankyou soo much. I get it now and I would be able to make the materials. The node setup is really helpful. Usually while importing models from sketchfab, sometimes the textures are missing but in this one, its a whole new case

[@statusfire115]

Hii firstly thanks for this great tutorial this is very helpful and i am having the same problem what I have to do to solve this ? The link u provided of screenshots is not working can u please help me out from this problem

[@jumuworks]

Great tutorial, everytime i add a driver my wheels changes the position on the coordinate system. I applied all transformations of the empty and the wheel. Both having 0,0,0 on local, but when i add driver the wheel moves to a different position on x axis. Thanks man

[@KaizenTutorials]

That sounds strange since you have applied transformations… weird! Fee free to mail me some screenshots of your setup at [e-mail] and ill have a look.

[@jumuworks]

@@KaizenTutorials wow thanks, i try again and if it does not work i wil mail you! Thanks, i saved the mail,if you dont want to have it public, you can remove it.

[@KaizenTutorials]

Nah it’s fine i’ve got it posted under several posts and it’s also up in my channel bio so no worries. Good luck!

[@Uzbekialien]

I figured it out. My cars wheels were in qanterion WXYZ coordinates. Changing this to Euler XYZ fixed this in the object properites (wuhere the x,yz, is)

[@agathiyan2493]

Thanks for the tutorial it was a good one

[@KaizenTutorials]

Thanks you’re welcome 🙌🏻

[@queenbeesstudio]

Where can i download those material concrete roads texture and all..

[@KaizenTutorials]

You can download everything from the Blenderkit add-on! I believe it comes with Blender by default, just need to enable it in the add-on preferences. If not you can look it up on Google and install it manually :-)

[@queenbeesstudio]

@@KaizenTutorials thank you so much...

[@KaizenTutorials]

No problem! Good luck 👍🏻

[@NeO-yn2me]

it's awesome and doo more like curving and crashing to a object etc 😍 😍

[@KaizenTutorials]

Thanks! This is just for simple basic animations, but I will definitely think about it for a future video. 👍

[@JeffreyPresstonBezos]

It is amazing and very releastic! Btw, I like the background music you used in this video, where did you get it from?

[@KaizenTutorials]

Thank you! All music in my videos comes from the KZbin Audio Library. :-)

[@JeffreyPresstonBezos]

@@KaizenTutorials ​ @Kaizen Tutorials I tried to find that, but didn't find it. Can you pls... link every bg music you use in your videos. So that we can also listen to it separately. Plus, can you just link this music in the reply you post to me. Thanks!!

[@KaizenTutorials]

You need to click your icon, top-right, then go to KZbin Studio and then you can find it on the left side. There you'll find thousands of songs which you can all use in your video. I can't link them, but the names of the songs I used are; No Sugar - Stayloose, Storms - Stayloose and Overdrive - Corbyn Kites.

[@pedrosa1604]

amazing thanks from brazil

[@KaizenTutorials]

Thanks from 🇳🇱!

[@errorgx]

Yeah!! Car animations are sicc! I always wanted to make them in Blender but considered out of my league. Can you share the beam thingy model that you made in timelapse 🥺🥺 I am not that good in Blender so it would be super helpful also appreciate your work. You uploaded so quickly after that rocket sim video thanks

[@KaizenTutorials]

Nice! Yeah I'm trying to keep 'm coming sooner, rather than later now. But like I said in the video the tunnel is very simple. It's just a plane with some simple extrudes. The beams on the top are even easier; just scale a cube on 1 axis and make it big. Then apply the scale with Ctrl + A, go into edit-mode and add some loop cuts with Ctrl + R. Then just take the two most outside faces (on the bottom side of the beam) and pull these down with G. Afterwards make sure to add a Bevel modifier with a low value and unwrap the model with U > Smart UV project. Add the material from Blenderkit and voila, you got it! I'm sure you can do it! Good luck :-)

[@errorgx]

Thnx I will make it soon when I get time :)

[@zk2934]

After importing the car, the files were all messed up without proper grouping( the car was not labelled as 'car' and 'wheels', it was randomly named as cylinder 1,2,3,etc and planes). Do you have any solutions for this problem?

[@KaizenTutorials]

Yeah, I had the same. The naming shouldn't matter to much, but you're best off by starting to parent everything together with Ctrl + P, except the wheels. So make the entire car 1 object, but keep the wheels seperate. Then you have the same starting point as I did in this video and you should be able to follow along without any issues! Good luck 🙌

[@zk2934]

Alright, I will try that. Thanks!

[@consumidormaldito]

amazing tutorial

[@KaizenTutorials]

Thank you! Cheers!

[@isidoreonyeako8950]

Great job man!!!

[@KaizenTutorials]

Thank you!

[@StonedLlama52]

Great tutorial. Can you edit the driver expression to increase the rate the wheels spin? On my example they spin very slowly when the empty is moved (using a different model)

[@KaizenTutorials]

I guess you could, but the best way to do it is just to have the object move more distance. This keeps things realistic in the way the physics behave. More distance in the same time = more speed. Also you can up the motion blur to make it seem like the object is moving faster than it is.

[@Vovchik0528]

Do you have a tutorial, how animate car, where it doesn't go only stright, but also turns right or left?

[@KaizenTutorials]

Nope, I don't. sorry!

[@TOMMY-tv7rd]

Love your tutorials could you do a her animation or product visualisation advert

[@KaizenTutorials]

Thanks! What do you mean by her animation? A product visualization ad is a great idea though! I will definitely note it down for future videos!

[@errorgx]

@@KaizenTutorialsProduct animation yesssssss

[@MadManTnT]

That is a great tutorial!

[@KaizenTutorials]

Thank you!

[@jackhendrych2687]

can u link the whole blender tutorial u did so i can swap the car and all that

[@KaizenTutorials]

I’m not sure I understand what you mean. You want the complete projectfile?

[@DoryRail]

Thanks.

[@KaizenTutorials]

🙌

[@SaneleCibane]

Thank you

[@eevee6155]

Lobb uhh brother Your voice is kind of attractive 😂❤

[@KaizenTutorials]

haha well thank you!

[@sagarmore4968]

Thank you sir 🙂

[@KaizenTutorials]

You’re welcome!

[@brixbuildz]

I want to try this but I can't even figure out the control p part which is right at the start. It doesn't work for me lol

[@KaizenTutorials]

Could be your parts have already parented object. Make sure to separate the parts first by selecting and hitting Alt+P. Then try again. Hope it works!

[@brunoriyuoficial]

Good work!

[@KaizenTutorials]

Thanks!

[@MR.OOFofficial]

When it saids downloads which one do I put there’s many like fbx usdz gltf glb sorry I’m just such a noob and need a lot of help

[@KaizenTutorials]

FBX is usually a good one for Blender!

[@danielbogdanovic4412]

Wow! It's so cool! How long you've been working with blender?

[@KaizenTutorials]

Thank you! I’ve been working with Blender on and off for about 3-4 years. But I’ve been using it frequently for about 1,5-2 years!

[@karthikeyan-bl2yh]

Please upload more car animation tutorial.

[@BLACK_TIGER_OFFICIAL]

Thanks

[@KaizenTutorials]

No problem

[@Spleeleg]

Thank u brooo

[@KaizenTutorials]

youre welcome!

[@karthikeyan-bl2yh]

Great👏👏

[@KaizenTutorials]

Thanks!

[@GeorgeWashingmachine848]

will I be able to make decent animations? my specs are: ryzen 3 3250U 8 gigs of ram radeon vega 3 graphics

[@KaizenTutorials]

You can do it, but it won't be very fast no. Rendering especially will take a while. As long as you stay in solid view though animating should be OK.

[@bubbly_bryan3615]

tutorial was great but my only worry is the wheels spin in circles and not as if they were going down the road, have any advice? 😊

[@KaizenTutorials]

Thanks You can add generated keyframe noise on the Z location to get the wheels to bounce slightly. This'll make it look more like they're on a (not so smooth) road!

[@yasirahmed.]

Subscribed ❤️❤️

[@KaizenTutorials]

Thanks! 🖤

[@indubp0101]

Great tutorial. I have a quick question on the car speed. Your car speed animation comparatively slower than mine. My car is fast. Am I missing anything ? I have the same linear interpolation and 240 frames.

[@KaizenTutorials]

Thank you! The speed of the car, in this case, depends on the length it travels. If you want it to move slower, just make sure the end point (final position keyframe) is less far away from the first point! Good luck.

[@stormzzn7133]

Hey I have a question when you download with the 3-D model what format did you use?

[@KaizenTutorials]

I believe I downloaded this model in OBJ, or FBX!

[@stormzzn7133]

@@KaizenTutorials thanks

[@payammorshedi_1413]

In a car making clip, when you press shift + z, that part is colored, but when I do that, nothing happens. Please guide me how to fix it

[@KaizenTutorials]

Sorry, I'm not sure I understand.

[@Inquirayush]

Hey! When I add a driver for the wheel and set it to y location, once I start moving the vehicle along the y axis, the wheel wobbles and is sort of turning crooked (the main idea is it's not rotating correctly). Each wheel has origin set to geometry. Also I'm using euler XYZ and not quaternion.

[@KaizenTutorials]

Does the wheel rotate correctly if animated by hand? If so then I'm pretty sure it has to do with the parenting. If not then it might still be your origin is misaligned.

[@ahmadshahzad2567]

i need help i dont even know how to setup that 3d model and jow apply those materials to that car and make it ready to the point whom to which you started showing the car

[@KaizenTutorials]

You have to delete all existing materials, make new ones and use the textures for it.

[@gareth6337]

Great tutorial, I have a question about the sky texture. It looks different now in blender 3.0. I only got 2 options: Hosek/Wilkie and Preetham.

[@KaizenTutorials]

Thank you! Could it be you're not using a stable build? So maybe like an alpha build? I'm in 3.1.2 (stable) and definitely still have the Nishita Sky Texture!

[@gareth6337]

@@KaizenTutorials and how do I know that I am not using it😂. Is it a add on or option you can enable?

[@KaizenTutorials]

Bottom right cornor should say which version you're using! If you can't seem to get it to work feel free to send me an email at [e-mail] so I can help you sort it out :-)

[@gareth6337]

@@KaizenTutorials ahh thanks, It worked! I used blender 2.85🤦🏻‍♂️

[@nexon_editzz]

im at the part with loop cuts on the road, after i do it and press unwrap it says (object has an ununiform scale) n then when i press uv editing its messed up, how do i fix it?

[@KaizenTutorials]

Apply scale! Ctrl a in object mode and apply the scale.

[@jenniferewulum1786]

Noice

[@blockthechainer]

this is a loooot of good info hell yeah thanks

[@KaizenTutorials]

Glad you like it! 🙌🏻🙌🏻

[@vmek3d]

Thank you sir!

[@KaizenTutorials]

You are welcome!

[@sanmary8003]

Bro, how can I turn the car like you did in this? 2:11

[@KaizenTutorials]

Just like I show in the video I think?

[@ethanwashoe5868]

Im wondering what the file type you imported was? I don't normally import objects I havent made, and there were several options on the download

[@KaizenTutorials]

I believe it was an FBX or an OBJ, i hardly ever use any other format. Sometimes, if no other option is possible I use an DAE file. But usually just FBX or OBJ.

[@MR.OOFofficial]

My car is going to fast how do I slow it down?

[@KaizenTutorials]

Simple, just make it love less distance in the same amount of time.

[@10MinuteEditing]

Everything working well, but my wheels are rotating slowly. It doesn't match the speed. What should I do?

[@KaizenTutorials]

You have your rotation set to Quaternion and it should be XYZ. Try changing that and it should work as expected!

[@Mar-vn6rw]

When i download my car, it's all black? Is there a way to change it or do i have to colour it myself manually?

[@KaizenTutorials]

Yeah this has to do with the import if the FBX somehow. Not sure and it doesn’t happen with every model. You’ll have to manually recreate the textures using the image textures and everything that came with the download!

[@Summmer85]

Thanks for this tutorial! I would like to ask, why my wheels spin a little slower than they should when moving the car?

[@KaizenTutorials]

No problem! You’re probably using quaternion rotation instead of xyz. Try changing that and it’s probably going to rotate normally

[@Summmer85]

​@@KaizenTutorials I see that I have rotation mode is XYZ Euler. Maybe something wrong with my car. I'm just using my own model, not the one from your example.

[@Summmer85]

​@@KaizenTutorials Tried on other simple model and it's work fine, but didn't with my current project (spin slower) :)

[@fuzokuhlemagudulela6850]

Thanks for the tutorial. I'm on blender 3.0 and every time I move the car the wheels rotate for a short distance then after they stop. Do you have any idea why that is?

[@KaizenTutorials]

No problem! Yes, I believe this is an issue related tot the rotation driver. I suppose your coordinate system is still set to Quaternion instead of XYZ! Change that and re-add all the wheel drivers and I believe you should be good to go :-)

[@fuzokuhlemagudulela6850]

@@KaizenTutorials Thanks for your response I will give a try

[@fuzokuhlemagudulela6850]

@@KaizenTutorials It worked! Thank you!

[@KaizenTutorials]

Glad it did! 💪🏻

[@williamf3806]

Video muito bom, eu to tentando complicações na hora de adicionar o driver de comando na rotação das rodas com o objeto vazio, está dando '' python restricted for security'' ou Expressão Python Inválida, como resolvo isso?

[@KaizenTutorials]

Hmm I don’t really know why it would do that. You’re probably having some minor issue with the code. Try redoing the steps from 0 and make sure to follow along 100%. If that doesn’t work feel free to email me at [e-mail]!

[@acnimatorstudio7487]

Good.

[@KaizenTutorials]

Thanks 🙏🏻

[@dimibzh]

Hey! It looks great! I'm new to Blender and I'm trying to do what you are doing but keep struggling with importing the car with textures. Can I get any help here?

[@KaizenTutorials]

It's a bit of an issue as this specific car imports very strange. Everything is black and the only way to fix it is by manually remaking all the textures with the provided image textures.

[@231XING]

Guys if sketch fab doesn’t work do this: don’t press anything yet got to your setting that is already clicked on when you load in change the first thing to cycles the third to gpu and change the threshold to .5 your welcome

[@miaaphotography]

Lovely tutorial and very helpful ❤ I have one question tho: when applying the sky texture there are no shadows, I'm new to blender and so far I haven't found any solution to this problem

[@KaizenTutorials]

Thank you! I think you might be in EEVEE? EEVEE doesn't provide shadows for HDRI's I believe. Try adding a sunlamp instead.

[@miaaphotography]

@@KaizenTutorials Thanks a lot!

[@TripleAce_]

why when I do the thing to combine everything into a car object and then make wheels sperate does everything get scrambled and car parts r everywhere?

[@KaizenTutorials]

That means the parenting isn't done correctly and after removing the parent from the wheels all the other parts do weird stuff. Try setting all the origins to the geo for each part and parenting in a logical manner.

[@TripleAce_]

@@KaizenTutorials okay thank you

[@vinscully553]

the tutorial helps me out but im struggling on how to make a wheel spin. it wont move at all???

[@KaizenTutorials]

That's weird! Have you set up the driver and parented the wheel to the empty?

[@grapes2goated897]

I made my own car with its own wheels but i used a torus which is on its side so it wont rotate like a wheel is supposed to. What do I do? I need help plsss.

[@KaizenTutorials]

Make sure yo apply the rotation. So CTRL+A and apply Rotation. Then retry adding the drivers! Hope that helps :-)

[@AliAbbas-vr6cf]

Sir my texter did not show click the alt +h but not show sir please explant the texter I am working for two days My first animation in blender

[@KaizenTutorials]

Sorry i’m not sure I understand your problem! If you have hidden objects, on the right side in blender there’s the outliner. You should see all objects in your scene there and they will have eye icons and desktop icons behind everything. You can hide and unhide things there. Maybe that helps!

[@bhargavdas7936]

hey kaizen. Is it same to rig a car if its a another model to?

[@KaizenTutorials]

Yes! The process stays the same, if you want to keep a basic rig like this. If you want a more fancy one, look into the car rig add-on!

[@kenyaaffiliates7584]

how do i import the car to the blender

[@KaizenTutorials]

Download a car model, unpack the zip file (if necessary), go to file > import > and select the same file type as the car. Usually it's FBX, OBJ or DAE. Then import it and it should be in your scene!

[@grapes2goated897]

Let me explain better. I made my own Tires using the torus mesh. When I add the drivers to the wheel the wheel rotates sideways instead of the way a wheel normally rotates. I would greatly appreciate help if possible.

[@KaizenTutorials]

Yeah that's probably because the current rotation needs to be applied! It already has a given rotation (since you rotated the torus mesh) and now it get's messed up. Alsomaybe try recentering the origin, by going to mesh>origin>set to geometry. This will make sure the centre of your torus is the actual point of rotation. Hope this helps!

[@voted]

my road dont show up on uv editing tab like you? i am wondering what im doing wrong. i applied the scale and unwrapped it but its not showing up? i am in the render result view in uv editing, is that the right one? i dont see anything else to do

[@KaizenTutorials]

Hmm it should work. It could be your UV's aren't aligned with your texture or you are simply not inputting the texture in the material! Make sure to add an image texture to the materials and use the road texture.

[@ronald3732]

hey man, great video. just curious how long a quick animation like this takes to render out? Thanks in advance!

[@KaizenTutorials]

Thanks! I can’t remember exactly to be honest but I think this was about 250 frames long at about 20 sec per frame tops. So about an hour of rendering. But if you optimize it and set the samples and everything up right, according to the tips in my render video you should be able to get it a lot faster. 20 minutes should be doable 🙏🏻

[@bhargavdas7936]

how did you add the car model in blender? its to hard to import the car model in blender!

[@KaizenTutorials]

It can be quite hard! I imported the model from Sketchfab. Made sure all objects were parented to eachother (except the wheels) with Ctrl + P. Parented the main object to the empty (which is used to drive the wheel rotation and actually move the car), aswell as all the wheels seperately. Then I created all the materials and added all the textures to them to make it look good!

[@mhugg]

bro u make what i need

[@KaizenTutorials]

Awesome!

[@mark-rutte]

Fantastische video! Ik heb een probleempje, ik kan de blenderkit add-on niet vinden. Heb je hier een alternatief voor? Alvast bedankt, groetjes Rutte Mark!

[@KaizenTutorials]

Ha, Rutte! De blenderkit add-on kun je gratis downloaden en installeren vanaf hun website. www.blenderkit.com/get-blenderkit/ Zover ik weet zijn er geen degelijke alternatieven!

[@mark-rutte]

@@KaizenTutorials Ah ok, bedankt!

[@LuckiB_S]

Yo this is cool but do u think laptop will not die when rendering xd my specs are i7 and some intel gpu 16gb ram

[@KaizenTutorials]

Nah this one is pretty light on the PC.

[@senseirakan3468]

for some reason my car wheels moving so slow when i move the car, how can i can fix that?

[@KaizenTutorials]

Set the rotation for the wheels to XYZ and not quaternion

[@tusqa7867]

sir which version of blender are u using is it blender 2.8 or blender 3.0 and above

[@KaizenTutorials]

I'm using 4.0 now. In this video I'm using 3.0.

[@orgh2o450]

I have an issue after applying drivers wheel stops rotating after cover some distance

[@KaizenTutorials]

That's because your wheels probably still have Quaternion rotation. You need to switch their rotation to just use XYZ rotation, that should fix it! You can do this in the object properties I believe.

[@hotpopcorncake]

noice but what if you want the car to move like it hit a bump or the shell move as maneuver

[@KaizenTutorials]

Thanks! A bump shouldn't be too hard. You could just manually keyframe a small 'bump' on the Z location of the empty. Other types of movement (sideways etc) are harder. It is feasible using drivers, but there are easier solutions for these types of animations, such as the Rigacar add-on by digiCreatures.

[@hotpopcorncake]

@@KaizenTutorials Thanks I'm sub for some more content.

[@KaizenTutorials]

Nice! Welcome to the club 🙌🏻

[@Evan-rq2ee]

So you said to press Ctrl p to just magically separate the entire car from its wheels, that literally does nothing. How did you do that

[@KaizenTutorials]

Alt P to clear parented objects, ctrl P to parent them again. So it should be alt P to separate the tires! 🤗

[@dark_x_blade3709]

Bro can u pls make a tutorial for rendering and exporting for the best quality

[@KaizenTutorials]

I’ll definitely take it into consideration, thanks! 🙏🏻

[@mikailmikail8788]

One question please 🙏 Can I draw the car in illustrator but from one side and then export it to blender and do the same technique? Of course with the body set to one piece and the wheels separated

[@KaizenTutorials]

Yeah you could! As long as the wheels are separate objects it should work. You’ll just import the illustrator files as images.

[@arpitgupta8308]

sir i want to do 3-4 renders of the car animation so should i make those senes seperate with differenct camera?

[@KaizenTutorials]

Hmm I'm not sure. It kind of depends on what you're going for. If the renders are fairly similar do it in 1 scene. If not make separate scenes.