Basic Troubleshooting of a NuTone IK15 or IK25 Entry Intercom System with a NuTone IS68 Door Station

[@northsideservicecompany3567]

Follow the steps in this Video before you buy any parts to repair your NuTone IK15 - IK25 - IS68 Entry Intercom System - Chris

[@ireneusjustinpolicarp8628]

Thanks. Now I know the model of my front doorbell. Have to find out the Nutone intercom model for the inside.

[@northsideservicecompany3567]

Hi Ireneus: It will be either a Model IK15 or IK25 - Chris

[@D.radventures2021]

I have a different problem not mentioned here. I live in a 3 story condo with a front door and 2nd and 3rd floor stations. Every time we hold the button to talk wether inside or to the outside after we release the button there is a 20-30 seconds static sounds and you can’t talk back until that static sounds stop. It didn’t use to do that before. I’d like to know your input if you have come across something like this and the fix if any. Thanks and great informative video.

[@northsideservicecompany3567]

HI D R: Try the following - Disconnect the IS68 Entry Door Station and see if the static sound goes away (probably won't) It may just be time for a rebuild of the main inside station - Chris

[@ashrafkarjiker6888]

Can you make videos how to troubleshoot the new camera intercoms

[@northsideservicecompany3567]

Hi Ashraf: What "new camera intercoms"? Troubleshoot for what kind of problems? - Chris

[@ashrafkarjiker6888]

@@northsideservicecompany3567 intercoms with camera

[@ashrafkarjiker6888]

Kocom

[@ashrafkarjiker6888]

Outside unit not able to buzz in and the inside unit not showing camera image

[@northsideservicecompany3567]

@@ashrafkarjiker6888 It looks like Kocom makes many different types products including LED lights and Toilet Seats. The general problem with Video Systems which have only 1 Camera and 1 Monitor is - There's no real way to tell which piece of the system has the problem, the camera may not be sending a signal or the monitor may not be receiving a signal that is sent. If you have multiple Cameras and multiple Monitors then troubleshooting is easier. Overall, this level of equipment is basically designed to be disposal - if something breaks, you just toss it out and buy a new unit. With a price of around $160 for a Camera and Monitor set, it would be impossible to justify the expense of paying some one to try and repair it. It also seems that a lot of their equipment works over WIFI, which adds to the overall complexity of troubleshooting. - Chris

[@StillFlyWith3kids]

i came across one in my attic still in its shrink wrapping. however it has 8 wires out the back making it even more confusing

[@northsideservicecompany3567]

Hi Ian: The Installation Instructions show what the wires are used for and how to connected everything up - Chris

[@michaelchampagne449]

I am looking for information on NuTone patio speaker. I have one that does not work. I have switched and tried it in the house at an inside station with a working speaker. The patio speaker did not work. I did not try the inside speaker on the patio. What can be wrong with the patio speaker?

[@northsideservicecompany3567]

Hi Michael: It is very likely that your Patio Station has a failed Speaker Cone - To test this theory - try temporarily connecting a working inside station to the patio Location. If it plays then you most likely need a replacement Speaker Cone for the Patio Station. We stock genuine NuTone Patio Speaker Cones - Chris 925-743-8236

[@michaelchampagne449]

@@northsideservicecompany3567 Thanks for your reply Chris - the I did what you said and the inside speaker did work so I guess it a Speaker Cone. I called your store today and talked to the young lady that answered. She was going to give you my number to give me a call. The numbers I found on the speaker did not match anything she had. I have also taken a picture if that will help.

[@helixlee9778]

how do you replace ik15 to a chime that works with a ring doorbell?

[@northsideservicecompany3567]

Hi Raymond, That's to complicated of a question for me to answer in a KZbin reply. - Chris

[@audiodood]

You might need a relay