Basket Weave Cutting Board

[@andrenascimento7680]

Muito top

[@ChrisFinnerty-t5n]

Can you tell us what the lumber requirements are for this board?

[@TheMulderProject]

1.) 00:24 I started this project with 6 pieces of purpleheart and 6 pieces of cherry (2"x2", 24" in length) 2.) 00:50 After running them through the planer they were all 47mm X 47mm, 24" in length, (needed them all to be exactly the same measurements and as square as possible) I guess that's what my lumber requirements were to make this one. 2:05 The 8mm purpleheart strips glued on and ran through planer 3:34 to make each piece 47mm x 47m all over again. I believe I cut the ends off due to snipe, then cut what remained into 9 sections 5:06. The whole thing ended up like 16 inches long 11 inches wide 1 7/8 inches thick. Hope this helps with any projects you may have!

[@SJSSawdust]

Well done

[@Born2Ride108]

Wish you say how much you cut off the original 2x2x24 to get the side pieces

[@TheMulderProject]

I believe I did most of my measurements in millimeters for cutting and fitment. 1. After running the 2x2x24's through the planer they were all 47mmX47mmX24" 2. I think I cut the side pieces at 10mm thickness (which was purposely too thick). 3. I put the side pieces through the planer and continued until the main piece measured 47mmX47mm again. 4. The side pieces ended up being around 8mm thick

[@BahasaDrum]

Hey man nice work! I am wondering, what is the final size of that cutting board? Also, did you manage to use all the wood blocks for that particular final size? Thanks!

[@TheMulderProject]

Correction: Final size was 16X11 inches, and 1 7/8 inches thick. I actually used all 6 blocks of each wood. I had several thin strips of purpleheart and cherry leftover. Thanks!

[@BahasaDrum]

@@TheMulderProject Thank you for answering my questions. I want to make one with 60x40x4cm of the final size. Wondering the size of the wood i need

[@TheMulderProject]

@@BahasaDrum Awesome! Happy Building!

[@louiss.w1944]

Awesome

[@littlecreekbowclub5288]

Great looking board but please build yourself some tables to work off on, Harbor Freight probably carries tables too.

[@TheMulderProject]

@@littlecreekbowclub5288 Thanks. I have lots of table space (Harbor Freight & homemade). It's just a preference a lot of the time.

[@ChrisFinnerty-t5n]

What is the final size of your cutting board?

[@TheMulderProject]

16 inches long, 11 inches wide, and 1-7/8 inches thick

[@ChrisFinnerty-t5n]

WHAT IS THE FINAL SIZE OF YOUR CUTTING BOARD?

[@TheMulderProject]

16 inches long, 11 inches wide, 1-7/8 inches thick.

[@AdhdwoodworkingwithB]

Lovely board 👌. But please loose the gloves while using the table saw 🙈

[@TheMulderProject]

@@AdhdwoodworkingwithB Thanks for "Karen" about me.