How to Unlock FCC Mode on DJI RC / RC2 / RC Pro Controller & FIX Bad Signal!

[@GAVINHR]

For informational purposes only - please be advised that using this version of the app also removes the 120m height limit within the DJI fly app for mini 4 owners in EU.

[@Teflonfilmare]

Including fully autonomous waypoint missions too. Signal lost between AC and RC the aircraft continuous the mission if selected in app settings 😂

[@alespeterka6436]

After activating FCC mode, I was left with a limit of 120m, the frequency shows 2,4, 5 and dual mode. Is this normal or am I doing something wrong? I'm from Czech Republic. Thanks for the reply

[@vaderjk]

Could somebody confim that changing to fcc removes 120m limit?

[@greenfree1525]

I don't have this app working! help!!

[@alfvincent]

App does not work with a number of Samsung phones.

[@alainfloutier6466]

I just want to leave a comment on this FANTASTIC combination of the FCC DJI Fly version and the Battery PLUS. I have a Mini 4 PRO with a DJI RC2. I reached a distance of 4 km with NO LOSS OF ONE bar on the signal power. I decided to return on myself just to be on the safe side, but I believe I could have reached 6 or 7 km…!! I also reached mountains side areas I have never been able to reach before. The « shadow » effect of a mountain or a building is not there anymore. It is so safe to fly knowing you always stay in control. I am really happy of my purchase and congratulations again for your work..!!

[@jimthorleydronefootage]

Cheers Gavin been a long wait on this one but drone tweeks is a great guy works his butt off keeping us up to date 👍

[@patuhsetiawan8957]

Thanks for sharing, I try and it works. But one thing that anybody using this methode should be aware. Once RC lost connection with aircraft, it will reset to CE mode again. So make sure that you set the RTH lost connection before you fly.

[@ramabudiman4222]

Efeknya apa mas dengan pindah ke fcc ini? Apa betul jarak terbang bisa lebih jauh, khususnya di perkotaan?

[@patuhsetiawan8957]

@@ramabudiman4222 iya. Signal FCC jauh lbh kuat dibanding versi CE, sehingga lbh kuat untuk menghadapi intervensi sinyal lain. Jarak terbang dalam kota bs 2-3 x lebih jauh.

[@rezalatas]

Pake unit apa mas? Mau coba di dji air 3 tapi masih rc2 tapi masih ragu nih..

[@Johnnysixpac]

I don’t see the difference between CE and FCC modes when you zoom in. What are the indicators of being in CE/FCC mode?

[@HSMTTNKRL]

line is down to 1 km FCC mode But CE mode line dont same

[@CRy3Gen]

Yeah dosen't look like ios works, exactly the same view

[@josephbobowicz458]

Something I find interesting is when I purchased my first DJI drone (Phantom 2 Vision+) back in 2014. In living in the UK using the DJI Assistant Software you had a couple of options. First of all if you did not have your reading glasses on you could "accidentally" put your P2V+ in FCC mode. Simply by accidentally selecting FCC mode. Secondly you could put your P2V+ into NAZA mode (No GPS Assistance). One of the advantages in using NAZA mode was shooting smoother video in not using GPS.

[@bayareaview8301]

No, with the new update done about a week ago this feature no longer works. Do you know we can do it to the new update

[@MrPurplepirate77]

It’s 38 euro for the app and a disclaimer that if DJI release a patch then you have no comeback, so you would need to be careful on updates from DJI

[@mavicminiflyeruk2437]

Thanks for sharing this Gavin! I had left the inbuilt screen controller to one side and had only used it once as the lack of FCC mode really allowed for poor transmission. Have tested this out now and it connects just like your link explains 👌 Now just have to wait for a calmer day to test it out flying, but thanks again 👍

[@ALTN8NRG]

You guys are in for an enhanced flight experience. 👍

[@FocusST305]

Safer flights are safer, it doesn't get any more simpler than that imo. This company is spot on and the creator is a great guy too.

[@mcleonardcrouise6803]

😊😊😊😊when the -90dbm is align with 1km mark on the right side you are on CE mode and when the -90 line is lower than the 1km mark you are in FCC mode.

[@grizzlybear2702]

On the mini 4 fcc mode takes away the 5.2 ghz frequency but its still worth it for the significantly higher transmission power

[@GAVINHR]

Indeed!

[@meddylad]

Just to say folks, the app doesnt work yet on Android 14 - I purchased the app but it only stays open for several seconds before crashing and closes. Contacted the company and they confirmed they are currently working to get a fix for this

[@NaturMehr]

Hi Gavin, many thanks for sharing but will this stay after switching of the controller as well? Greetings from Bavaria, Bernd 🎬

[@GAVINHR]

Hi there, my understanding is you will need to do this each time but only takes seconds :)

[@NaturMehr]

@@GAVINHR Okay, good to know and many thanks for your quick reply 👍

[@jameskelly1781]

I’m disappointed it need to go through the same process for every flight. I think it should have been mentioned in the video. I previously had a permanent fcc hack on my RC pro I sold. Think I had it permanent on my M2Z.

[@davidharle952]

Thanks Gavin. This is amazing, I really don't see why we are subject to those rules when it's obviously safer to have a good signal.

[@GAVINHR]

Exactly David

[@SimonArmiger]

It’s because the frequency range used could interfere with other equipment using those frequencies. Sometimes the frequencies aren’t ins use but are reserved for future use. Every time a new mobile generation is launched, like 5G, it uses a different - or extended - frequency range, and the reason we lost analogue TV a few years back is because with everyone moving to digital, the analogue range was better used by other equipment - including (I think) mobile phones. It is annoying but it’s a general rule on any equipment that transmits over the airwaves - or might cause interference (electric motors etc).

[@davidmatthews3093]

Simply, I’m sure you understand simple, the licensing and control of the airwaves is more important than you.

[@davidharle952]

@@davidmatthews3093 And I never said it wasn't, I simply stated that it was safer.

[@Simon1011-]

@@GAVINHRis the fcc only in us

[@NorthSurvival]

Do you need to do this every time you fly, or just this one time?

[@GAVINHR]

Sadly this every time

[@Markabblett]

It works! Obviously only as a test at home not In flight but goes into fcc mode

[@GAVINHR]

Great News Mark!

[@alainfloutier6466]

I confirm, it is working very well...!!

[@HugforYou]

@@alainfloutier6466 Does the FCC always stay ON or do you have to reactivate the FCC mode every time you fly?

[@alainfloutier6466]

Unfortunately Yes, you have to reactivate the FCC mode when you turn your controller on.

[@HugforYou]

@@alainfloutier6466 Thank you

[@fpv-patb3708]

Hi Gavin. I have 2 questions. Is it working with any firmeware version ( the latest ? ) and how does it work, when I want to fly the Mini4 with the goggles 2 and motion controller?

[@jorisbonson386]

I have the same question - I have the goggles 2 and motion controller too, do I need to enable FCC mode on both of those also?

[@DroneLifeLelystad]

I found another site to do this. Cost a little more but then you have a permanent FCC patch on ur Rc 2. Did expect alot more range due to the antennas and occusync 4. Just gave me 600 meters extra than my Mini 3 pro FCC Rc controller

[@093604024]

Could you please share the site? I want to browse too.

[@eitanfine5185]

Hi all Please tell when the change is done and you go to transmission I can’t see what the difference is physically between CE and FCC you do show it but I am confused what I am looking at , what is that subtle difference on the bands with this 1km line

[@nxsynjs]

Looks interesting. probably me being worried about nothing. But will DJI care refresh and the warranty be affected it you lose the drone and this is operational?

[@GAVINHR]

From what I understand this will not affect care refresh at all. Check out thebFAQs on the website but I’m sure it’s fine

[@kamikazekaos]

No issues 😊

[@simoneiannacone]

When switching to fcc mode, is the setting saved even after restarting or do I need to repeat the procedure each time I turn on/flight?

[@DONUT-FPV]

I have mini 4 pro with RC2 controller and the quick share won't connect on the controller to be able to do the hack , when you hit quick share in the controller it just says to connect the phone to the mini 4 pro

[@grahambutlin8835]

Ffs Great news Gavin,just what weve been waiting for, Christmas has come early 😂😂😂

[@MarcyBenzy]

I have had the licence already but at that time it was not suitable for Smart RC now it is 🎉 Question: Gav, should one remove the DJI fly app first and then install the DJI fly FCC app? That i not know yet... Thx for answer. Greetzzz, Marc

[@GAVINHR]

I believe on android you have to remove it yes but on iOS you can run both from what I understand

[@MarcyBenzy]

@@GAVINHR I will try that my thx! it works. yes first delete the DJI app then install the new fcc dji app

[@lifestapestry2968]

If only this setting would be a permenent thing. Too much hassle to keep changing it every time you fly

[@jorisbonson386]

Yep, ABSOLUTE deal breaker.

[@meik.kl55]

Do I have to do this before every flight to get FCC or is it only necessary once???

[@adam3112]

Does it default back to ce on each boot up or does it stay in fcc after doing the drone hacks setup?

[@jameskelly1781]

Unfortunately yes.

[@sunset_chaser]

if i buy the app will it work with all my drones ? my drones are, mini 4 pro, mini 3 pro and mini 2. ........... as in, will i have to buy for each separate drone ? or will one purchase of the app work with all of them ? ............ sorry for the newb question 🤔

[@GAVINHR]

Nope it’s one app that works with all the DJI drones from the mini 2 on onwards

[@sunset_chaser]

@@GAVINHR great, thanks Gav 🤗

[@src2920]

Thanks Gavin. Doesn it still work in 2024 to put fcc mode and remove 120m height limit? I am planning to buy a mini4 pro

[@FocusST305]

Yes

[@johnnymac26]

Nice one mate will this work with the rm510?

[@GAVINHR]

Hi mate- your comment has prompted me to alter the title, yes it also works with the RC Pro :)

[@johnnymac26]

@@GAVINHR cheers mate

[@PescaLagoIseo]

Does it works on last firmware?

[@Shane199416]

Odds on DJI patching this is an update? Have they so in the past? Don’t want to spend €40 and then it not work in like a week Also is there any videos online showing this hack working and comparing to CE mode?

[@GAVINHR]

Yeah 👍 the video I made linked in the description :) I tested this in June ish last year, it’s not new it’s been around for some time now it’s just now it works with the rc :)

[@Avoletta-qs6nf]

@@GAVINHRI think it always worked like this but no one found the operation sequence to make it work until now. And yes (sadly) this is a very easy fix for DJI, so if they want to stop it, they can (like they did for the free hack with the previous Android app). On the other hand I’m pretty sure they can’t stop the tweak on RC-N2.

[@Teflonfilmare]

​@@Avoletta-qs6nfnot accurate at all. Yes the Drone Hacks solution changes firmware setting in aircraft that can be blocked. On the opposite Drone Tweaks doesn't. It's a software wrapper on DJI Fly app. DJI can't prevent that mechanism easily. It's a blessing 😂😂😂

[@Avoletta-qs6nf]

@@Teflonfilmare read better...

[@Teflonfilmare]

@@Avoletta-qs6nf u obviously simply don't understand the difference in software architecture between Drone Hacks and Drone Tweaks. Bye bye bro

[@czakejro]

Hello. This will be work with my dji mini 3 + RC-N1?

[@bigkells135]

I have mini 3 (non pro) but cant get the fly app and my smart RC tk connect at the same time, any workarounds for this?

[@MKINDYR107]

am I right in thinking that this 3rd party app costs around £30? no mention in the video.

[@GAVINHR]

Yes it is around that price, this video is for information only and simply wanting to share the news rather than promote it as such which is why I have referred all info to the website rather than doing a full walkthrough. Hope you understand

[@ptaylor5014]

Thanks Gavin, i did purchase this last year for my Mini 2 using an Android phone, but i never used it 🤔as i never got signal interferance were i live, just wasted my money sadly 😥

[@GAVINHR]

Make sure you use it! Honestly even if you don’t usually get interference it’s always better to be safe than sorry :)

[@kamikazekaos]

Are you cazy😂

[@eitanfine5185]

It works But careful if it disconnects then it’s back to CE and if you too far then hopefully it will return to home

[@Johncaig7279]

Will this work on the RC Pro? The RC Pro offers less range to my Mavic 3 Pro than the RC2 does to my Mini 4 Pro.

[@rosscopantani4678]

Is it possible to use this with the standard dji mavic mini 1? Cheers

[@Videocanal1978]

And is it posible for the mavic 3 Enterprice Termal with a Rc pro control?

[@stevecoulthard8060]

I've read that restarting the drone or controller or losing signal will reset the mode back to CE, so you have to do this procedure before every flight and every time you change the battery.

[@benaven1786]

true

[@MechaUsagi]

This makes it totally impractical. Thanks for making this clear.

[@FocusST305]

@@MechaUsagithis covers the flyers ass! Should you loose connect n the drone crash, all traces of FFC are removed 😊

[@sergiisolomakha3229]

Very useful video and many thanks to Gavin @GAVINHR ! If possible, please answer - 1.The mod has been removed - does it leave any traces of its presence after a restart? 2. It is clear that the consequences are the responsibility of the user, but is installing a mod automatically a waiver of the warranty - for example, in the case DJI care? Thank You so much!!!

[@sergiisolomakha3229]

I got the answer - from .drone-tweaks - it need to run each time and ... doesn't negate DJI care.. Thanks !

[@GAVINHR]

Oh sorry my apologies I missed your first comment, glad you got the answer directly

[@baddlord777]

So I take it, USA doesn’t benefit correct? And the app needs to be initiated on every flight, or every new power on ?

[@GAVINHR]

@@baddlord777 the USA already get the highest levels of output, this is basically giving EU users what the US drone flyers get

[@boopidoo]

Drone Tweaks app doesn't support support Android 14 which most newer phones from Samsung has and I'm doubtful it support the latest FW updates from DJI. Also seems very tedious to have to connect with the phone every single flight.

[@hakanergul]

hi,Is the drone out of warranty?

[@chadgilmore5046]

What about the smart controller pro will I be able to change that as well

[@saltire546]

just tried this and on my rc pro i dont get the quick transfer mode coming up on the screen so not working, I had to uninstall my original dji fly app before i could install the fcc app and now i have to uninstall the fcc app before the genuine fly app will re install on my phone .WHAT A MESS !!!..My firmware for my controller is (03.02.0500) which is the latest for the controller and the aircraft firmware is 01.00.1200 Mavic 3 .So if you own a Mavic 3 with an RC Pro controller then you might be better going to the pub and spending the money on a few beers.The quick transfer mode works on official Dji fly app but not the fcc hack version .

[@News2020-b4u]

Can you compare DJI RC2 vs RC Pro Controller?

[@DarranFuller]

This tweak no longer works with the latest updates on mini 3 pro right? I did everything as instructed and did not change i see most comments are before the latest update

[@GAVINHR]

I still believe it works with certain devices, give the developer a message he is very to helpful

[@destancetin8290]

My remote software version is 02.02.0300-Is the version of the vehicle 01.00.0600 supported, you will do it without opening the box, it is said that it does not work when you update, is it true?

[@bigsighmusicdroneblogs1843]

I need it on my mini lately it's barely took off and signal is soo weak it tries to RTH right in front of me to do that goes up and away then back meanwhile I'm watching it with no control at all. The distance im talking about irs roughly 20-30ft

[@nierenz67]

So for me, Quick Transfer has never started automatically on the FlyApp from my cell phone. And if you manually activate Quick Transfer by pressing the drone's power button three times, the RC controller immediately loses the connection. I wonder how this is supposed to work? Has anyone actually managed this with the RC controller?

[@gamebox9067]

I think its a new patched version but im not sure, I even asked the drone tweaks guy if it would work on all versions and he said yes to me and when i bought it found out it doesnt

[@FocusST305]

There is a video explaining this, it's very simple, you'll need your phone, official dji app, FCC dji app and the RC2, it's a little bit of a fiddle the first time but it soon becomes second nature

[@mrsuperyogi]

Hi , I just saw this video now. Thanks ! But Is it still working though ? (for mini 3 pro), (May 2024) I don't want to buy it for so much and then find out it isn't working anymore. Many thanks

[@Yeshua73732]

Did you find out if its still working

[@mrsuperyogi]

@@Yeshua73732 no

[@inmovefilms2630]

Hi, it is working for MAVIC 3 PRO?

[@Jimbo-in-Thailand]

Greetings Gavin - I tried all the hacks way back when to try to get my Mavic Mini CE into FCC mode since Thailand's overpowered 2.4Ghz cell towers rendered the drone almost useless for cinematic filming from interference, i.e, jitter, lag, latency problems. And I thought FCC mode power output was a physical difference from the CE models, i.e., different, more powerful hardware. Has that changed with later models such that CE/FAA versions are really the same internally? As always, Cheers from Thailand!

[@GAVINHR]

Hi my friend long time no speak! Yes the mavic mini mini / ce had different hardware this is correct, with the later models from mini 2 onwards the hardware is the same and the output is based on geo location :)

[@jameskelly1781]

Sawasdee khrap, I live in Chiang Mai mate. Never had an issue with tower signal interference, despite there being so many of them. I've flown M2Z, Mini 2, Mini 3, even the RE goggles all worked fine. Maybe the Mini CE is not great with nearby intefrence

[@Jimbo-in-Thailand]

@@jameskelly1781 'wah-dee krup -- Here in Roi Et city in the rural northeast, cell tower and/or home WIFI router interference is indeed horrible. It's not just my Mavic Mini, my previous non-DJI drones also suffered from it. If I get out of the city then range is OK, but inside the city I begin to get control/camera lag/latency problems when the drone is only 100-200 meters away from me. And the proliferation of new 5G cell towers seems to be exacerbating the problem. It's so bad I don't fly the Mini anymore, and that's a shame because it's been a fantastic little camera bird otherwise. I took it to the US last Fall for a long overdue family reunion and it didn't suffer the Thailand issues, but then again I didn't press my luck trying to fly it very far away. I may try to snag a Mini 2 SE soon and give it a try since prices have fallen so much on that old model. Cheers from Isaan!

[@andyairshots]

Hi Gavin, good news. 👍 Quick question (excuse my thickness😂), when I goto your link it asks what drone I have and then leads me to the Android download. I assume that I only need this once and it will cover Air 3 and Mini 4 Pro, am I correct?

[@benaven1786]

yes..your licence will work on all your drones provided its on the devlopers list.. ive read that also

[@andyairshots]

@@benaven1786 thank you.. 👍

[@stevejordan3831]

How do you know if you done the hack to FCC mode ? On the transmission mode just look the same to me . Is there an indication..as far as am concern I done complete the hack successfully on RC 2 controller. Mavic Mini 4 pro

[@paulhannington9981]

Looking at the right side of the transmission graph. If the top line is close the 1km marker - CE mode. If closer to the 4km mark - FCC mode.

[@paulpitney7661]

Does this affect your DJI care in the event of a claim if DJI see that your was in fcc mode

[@benaven1786]

no it does not ..its written on their site

[@daz51173]

Will this work for the mini air 2?

[@marekdominiktomczyk2009]

I bought it and installed it.. I have a question because I think everything went OK, but is there anywhere in the controller menu where I can find the FCC icon confirming that the installation was successful and I am on the FCC website?

[@GAVINHR]

If you check the faq’s on the website it shows you depending on which operating system you are using :)

[@marekdominiktomczyk2009]

I do everything according to the instructions and as in your demonstration video for Android, but then the graph does not change for me, what should I do now? I wrote to support but no response

[@GAVINHR]

@@marekdominiktomczyk2009 drone tweaks will get back to you he does offer great support

[@bogunio]

I bought this app and it works perfectly on android 10. But doesn't work on s23 ultra with android 14. They are working on it.

[@Moroder_Drone]

I guess everytime you have to swap batteries, as you have to switch off the drone, you will have to repeat the same procedure.... Am I right? Thanks

[@benaven1786]

yes

[@MrPolleke1949]

Do i have to do this every time before go flying or is it permanetly?

[@jorisbonson386]

Literally EVERY time you reboot the controller 🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂ It's complete junk.

[@MrPolleke1949]

@@jorisbonson386 thanks

[@klejdikd7326]

Do I have to do this everytime I turn on and off the drone or change battery?

[@jorisbonson386]

Yes... it's laughable.

[@pincopallo511]

The app doesn't work with my mini 4 pro and RC2 smartphone samsung note 8 android 9 it almost never manages to enter quick transfer and when it succeeds it remains in CE

[@IvanToman]

Can I now fly around the whole Earth without losing signal?

[@GAVINHR]

Try it and let us know how you get on :)

[@IvanToman]

​@@GAVINHRDid not work. Not flying around Earth but FCC was not enabled for me. I followed all steps exactly as in the video. Posted also in their facebook group and now waiting. I suggest not purchasing this tweak yet until everything is sorted out because currently looks like hit and miss.

[@GAVINHR]

@@IvanToman it usually works every time, I’m sure drone tweaks will answer soon

[@IvanToman]

@@GAVINHR We are in contact... something is wrong, it works sometimes but most of the time not. At this point we can't find the cause.

[@GAVINHR]

@IvanToman ah that’s a shame and certainly not something I have heard of I hope you get sorted

[@kamikazekaos]

Sod that...... id prefer my smaller rcn1 and better phone screen with the fcc hack😊

[@GAVINHR]

Yep - I still prefer the RC-N1 setup as I made clear often but at least people now know that it can be used with the screen controller :)

[@jufriadidjohan6313]

Hallo.. is it work on DJI RC N2..?

[@GAVINHR]

Yep it’s much easier with the rc n2

[@philipriding]

Would help if the controller wasn’t 500 miles from the camera when making this video

[@LISTEDGames]

Do you have to pay for the modified app?

[@GAVINHR]

Yes it’s a paid for service

[@rollworldshoot]

It's No permanent FCC if you lost signal or disconnect drone FCC back to CE :(

[@chris-ip4pk]

Thanks for this.does this have to keep being done .every time switched on.

[@adam3112]

Im wondering the same

[@jameskelly1781]

Yes

[@золотой-й1и]

Приветствую на мавик 3 pro можно ли сделать такую манипуляцию?

[@jorisbonson386]

Hi Gavin, I want to do this with my Mini 3 pro (DJI RC) but a bit confused what's being modified - is it just the transmission power of the remote itself (for controlling the drone) or the transmission power of the drone (i.e. video broadcast power so better visual reception on the remote)? Or both? Would be great for some clarity! Thanks :)

[@big-smoke-rc]

It's the broadcast power of the video and control link transmitter in the drone. It can handle more than the EU regs will allow it to.

[@DanielCosta-zp6jl]

You just made my day you are de best.

[@marioslipsos7756]

How do you connect with quick transfer.?

[@4wdfarm]

I struggled with that, you need to turn on wifi and bluetooth in the controller - and bluetooth in phone.

[@mayronvansambeek1202]

Seems that the license is only valid for 1 year. We need a new one after 1 year - right?

[@GAVINHR]

Yes that is correct

[@jameskelly1781]

Wow I never noticed that. Between having to repeat the process, and a one year license, I have to say I’m disappointed. I’ve had the FCC hack on lots of DJI drones and remotes previously.

[@sahathvlogs1876]

You have to buy the fcc version

[@rafam8359]

Why some people dont understand that when you buy that soft you automaticly can't update firmware ...

[@danjor_droneitsme6874]

👍👍 keep em coming Gavin

[@GAVINHR]

Of course!

[@svenskanal]

Does it work for RC-N2 as well?

[@GAVINHR]

Yes it’s always worked with that controller and the RC-N1

[@ondrejmarkowicz9853]

Download link?

[@GerryM.]

Hi. I just bought the app and tried it there now on Mini 4 Pro with RC 2. Everything went as planned and saw the expected change in the transmission graph. Flew out about 600~700 meters and suddenly lost all connection. RTH kicked in and transmission graph went back to CE mode. Tried again and got the exact same result. Is anyone else having any problems with the mode resetting mid-flight? Is the mode only resetting because the connection gets lost temporarily? Any advice?

[@GAVINHR]

Somebody said if the connection drops it reverts in a comment previously, of course this is not my software I’m just showing its now. Possible, if you have any issues Florin at drone tweaks is usually very helpful

[@GerryM.]

Yeah, I read that too and I get how that could be explained, but I'm not sure if there isn't an additional issue going on with this, but can't explain why it would drop so suddenly in an area where I can usually cover a much longer distance in regular CE mode. Perhaps there's something to the observation that it seems to remove the 5.8 band when FCC mode is implemented and this would not be ideal in my urban environment. I've already posted to the comments on the Drone Tweaks channel. I'm not putting the solution down. I'm just trying to share my experience and add to the conversation on what could be a very useful application.

[@Zibixx79]

Cool, but there is an annual fee for use, not a one-time fee. :/

[@UkzEnglishBullTerrierz]

cheers gav this will do until someone patches the rc2

[@dolomiticabrentabike1653]

This is very important got it from the producers site, Important things to consider if you have several drones, some with standard controllers and some with smart controllers, you can now use the same app for all of them this is a very short procedure (~15 seconds) but it must be done before each flight restarting the drone or controller will reset the mode back to CE completely losing signal between drone and controller (no video, no telemetry and image goes black & white) will reset the mode back to CE

[@r1simoncollinson]

Works a treat well happy 😊

[@yordiedubois]

Autonomous flight on the RC2 does NOT work ! Still only 3 options on signal lost (Waypoints): RTH, Hover & Land. There's NO mention of this on their website

[@dannyhendy]

How do you attach your phone to the DJI RC?

[@nierenz67]

This still doesn't seem to be possible, because that requires Quick Transfer to open automatically on the smartphone after opening the FlyApp. I've never seen that anywhere and I don't know how that was possible in the video. Maybe someone can tell you how he managed it...

[@Lee.gRC27]

I use the fcc hack on my mini2 as I live in a city and my signal and range is crap

[@MostlyDrones]

Why can you only pay with Pay Pal?

[@luispedrograo]

Does it work with DJI RC Pro?

[@GAVINHR]

Yes

[@fj1100mark]

If I’m honest, I absolutely hate videos that are tutorials where they don’t speak and expect you to read everything on the screen in the amount of time it’s on. My eyesight is not good enough to do that. I do wish that people who produce these videos would actually narrate them, or at least get somebody else to narrate them if they don’t want their voice on it.

[@GAVINHR]

Yes that’s understandable, the instructions are also at the top of course and if needed you could pause, the maker is checking the comments so hopefully if needed they could guide you further.

[@uptowndisco2]

use the pause video button to read text then play again when ready to move to the next instruction then pause .

[@nexlev818]

Oh, stop your belly aching and appreciate the fact that somebody took the time to make a video....geez

[@fj1100mark]

@@nexlev818 maybe you would like to see it through my eyes, and then make the same comment because I very much doubt it written the damage in both eyes from diabetes is not fun believe me

[@jameskelly1781]

Is it meant to be permanent, my Mini 3 pro goes back to CE after switching off drone and remote, the starting both again.

[@rodel2.056]

Nice tips😊

[@danrides9036]

My app keeps closing as soon as i open it, can you help?

[@GAVINHR]

The drone tweaks one? If so send the developer a message he will advise accordingly

[@hd-1470]

Does it work with RCN2?

[@GAVINHR]

Yep!

[@hd-1470]

@@GAVINHR ok thanks for quick response dude

[@LoganWaldner]

Will the controller stay in fcc mode permanently

[@jorisbonson386]

No.

[@KB_Lincolnshire_Photography]

can you switch it back to ce mode ?

[@GAVINHR]

Yep

[@KB_Lincolnshire_Photography]

cheers mate wonder if it will reach you over the bridge from Grimsby lol might be a push@@GAVINHR

[@grahambutlin8835]

Just watched dustin Dunhill fly his mini 4 6.5 miles out in America,came back on 39pc,never got back,i wonder why.😂😂😂

[@GAVINHR]

That will be the FCC power ! :)