Bathroom Diverter: How to install Jaquar 3 inlet diverter fitting

A shower diverter is a valve that diverts the water to your shower head instead of the tub spout. Jaquar’s diverter is useful for multiphase mixtures. This bathroom diverter fitting can create a defined flow between vanes.
How does a bathroom diverter work?
Jaquar’s 3 inlet diverter fitting is really simple to use. Pull the diverter button over to get water from a showerhead. Lift the diverter to open water from the tank. Turn the knob right for cold water and left for hot water. You can control the temperature you want the water and if you want to fill your water tub or have a soothing shower with our bathroom diverter.
Buy Jaquar 3 inlet diverter fitting: jaquar.com/en/ald-chr-193
A 3 inlet Jaquar diverter fitting is easy, just follow these simple steps:
Step 1: Place the diverter in the desired area.
Step 2: Fix the pipes to the diverter. While cutting the pipes make sure you measure them properly.
Step 3: Place the bathroom diverter set into the wall cavity and connect with the inlet connections.
Step 4: To check the horizontal alignment, use a transparent hose filled with water. To check the vertical alignment, use the spirit level.
Step 5: Set the body of the bathroom diverter so that the maximum and minimum marks in the protection cover fits the wall surface.
Step 6: Remove the screw and remove the black protection cap.
Step 7: Fix other bathroom diverter sets like the flange, button on button assembly and knob.
Step 8: Flush out all water from wall openings to remove any type of dirt/debris in the pipeline. Fix the shower head and spout.
Remember to cover all products with a cloth or polythene bag to prevent any damage to the product finish before you start using it.
#bathroomdiverter #jaquarbath #JaquarIndia