Bathroom water proofing || Before laying Tiles || DR.FIXIT 113 FASTFLEX || 2nd coat

* Bathroom(suken Bathroom) Water proofing on 1St floor to avoid Water leakage.
* Using Dr fixit 113 fastflex 12kg , waterproofing is carried out in this video .
* 2 coat should be applied in water proofing, in a interval of 6hrs to 8hrs after the 1st coat applied .
* The surface should be clean and free from any dust or any other materials .
* For more information Read out the procedure that listed out in the box .
#subscribe #waterproofing ‪@erbascivilbtb22‬

[@shivambhardwaj1652]

Sir ground floor pe to mitti ka bharat hota hai to uspe kaise apply karna hai mai abhi apna makan bana raha hu plz tell kyuki uspe to hard surface hai hi nahi first floor ki tarah

[@anant0089]

fastflex or 2k what is better if need to do it below roof water proofing ?

[@NasirKhan-cs2qn]

Can i used Dr fixit 304

[@upendrasinha9578]

Isko use karne ke baad curing karna chahiye kya?

[@ashishdwivedi6037]

Floor ko pehle kacha karvana hai uske baad ye chemical apply?

[@kiteinair12]

can additional water proofing be done just below the tiles so that water from weak grout doesnt penetrate in future?

[@erbascivilbtb22]

For GF it's not required mostly, for the 1st floor like that, before laying tiles waterproofing is always recommended, if the tiles gap is not properly filled with grout or white cement or improper laying the water seepage will penetrate the bathroom floor and reach the bottom most surface, if waterproofing is not done water will leak through Ground Floor celing and will corrod the TMT rod more ,even will cause lots of problems , to identify leakage a pipe will be provided with the waste water pipes separately after or before waterproofing known as spout pipe .

[@rumagorai7395]

apnader kachhe kinte paoa jabe?

[@Mhonlumo1]

Does Dr. Fixit pidifin 2k and this product (fastflex) work the same way?

[@erbascivilbtb22]

Yes .

[@Mhonlumo1]

@@erbascivilbtb22 Thank you.

[@men-tastic6232]

Sir ye fastflex dewaar mai karne ke baad tiles lag jayengi

[@erbascivilbtb22]

after applying fast flex, floor plastering work will be done ,after that tiles will be layed.

[@men-tastic6232]

@@erbascivilbtb22 ok sir but i asked about bathroom wall

[@erbascivilbtb22]

@@men-tastic6232 not necessary for bathroom wall , if u found any leakage or seepage , leakage in pipe should be checked or if its occur due to rain, exterior waterproofing on wall or Applying damp proof paint should be followed ..

[@civil9226]

Price?

[@erbascivilbtb22]

1710rs in chennai .

[@balajis3113]

Sir, should use this coating before placing concealed pipe lines or after placing concealed pipe lines??

[@erbascivilbtb22]

Not applicable for concealed pipes on wall, floor pipes will come over the waterproofing layer , after applying waterproofing , an floor plastering will be done .after that ,pipes are layed for septic and waste water line ..

[@kiteinair12]

@@erbascivilbtb22 can additional water proofing be done just below the tiles so that water from weak grout doesnt penetrate in future?

[@zeenenterprises285]

This method of application showing in video is wrong. Do not waste your money. Call professional service providers who are authorised.

[@erbascivilbtb22]

This is just a simple precaution for water leakage in bathroom floor before Laying tiles , this method is more enough on before Laying tiles, u can easily apply this product by reading out the application procedure from the box itself , for this professionals are not required may be a painter is enough, if u find any seepage or leakage from a building after constructed for long days that time u may consult a professional .

[@papiyachakraborty9252]

Sir apner ph no ta daban