The secret of how to drill holes into porcelain tiles | Hanging a towel radiator | DIY | Tutorial

[@dalesdipstick]

The advice about the baskets in the shower was really appreciated such a good idea cheers mate.

[@robertsamaniego6003]

Thanks for the great advice! I thought I was doing something wrong when my diamond bit required so much effort, but still would not go through the tile completely. I guess it was done since I had already drilled four holes with it previously. I bought a new bit, and drilled four new holes with much less effort. Well worth the price of a new bit. It’s good to know that there are people like you making KZbin videos who actually know what they are talking about! Unfortunately, this is not always the case.

[@holmie5663]

Thanks for the video. I drilled my porcelain tiles today following your tutorial and it worked a treat. Thanks man.

[@kentonklassen9994]

A good video and he is right about using a diamond hole bit. I don't think I would want to risk cracking my porcelain tiles with a carbide bit. One thing I would add is that dipping the bit in water every 5 seconds or so saves the bit from overheating and in the end saves time and lots of money.

[@chipcook6646]

Or a tape dam filled with water.

[@TheMiddletownInsider]

Glad I found this. I have to drill porcelain for the first time next week and was dreading it.

[@stanjones9479]

Thanks for this video. Right to the point with no nonsense. Very professional. I have to enlarge the mounting holes on my mom’s toilet bowl bc the replacement screws are larger than the discontinued standard ones that hold the tank. I’m shaking in my boots bc the unit is about $1000 and now it’s been discontinued. I can’t mess this up! Thanks again.

[@theoriginaldrpizza]

Not only is it a good idea to spray water on the porcelain and bit to keep it cool and increase the longevity of your bit, but it also reduces the dust from the porcelain which contains silica. It's bad to get silica in your lungs.

[@johncarlson7955]

I watched this video and ordered those same bits online, followed your instructions and really worked well. Thank you!

[@jeyemcariaga7735]

what kind of drill bit is this?

[@Richie_]

I wondered why the masonry drill bit wouldn't even make a dent in my tiles. I will order the diamond bit. Thanks for this video.

[@suds2you]

Porcelain is extremely "hard"!

[@Richie_]

@@suds2you the diamond tool worked well.

[@fbilley3957]

As I am a Diamond Driller for forty years, water cooling is essential for cooling our bits. Keeping the bit cool during drilling will keep the diamond boart secure in the matrix of the tip for much longer. Heat will allow the matrix become soft and the diamond boart will fall out. does this make sense? How hard you push can also dislodge the boart. Hope this saves you some cash.

[@suds2you]

Many thanks, excellent advice

[@karenbaty6985]

Thanks for video drilled my porcelain tiles using the diamond drill bit worked like a charm cheers

[@john-martinprobert2336]

Just purchased a 5.5 and an 18 mm of that brand although I haven’t used them before and found this video very useful, thankyou!! 👍👍👍

[@markvickers9677]

Thanks for the video, spent 2 hours with a ceramic bit and masonry bit to drill 2 holes.

[@yggdrasilfg]

Thank you, this was helpful. I bought the bit for ceramic tiles and like you said it made a dent but it broke so I was looking for advice :)

[@skillsonian]

This is the best video on this subject. Thank you!

[@999danden]

I managed to put up a bathroom mirror type steel cabinet, eventually! It needed four holes and wore out the diamond porcelain drill as predicted. The holes ended up costing more than the Wilko cabinet! Thanks for the tips on drilling.

[@redhoward11]

Slow the drill down and keep the bit sprayed with water. I drill in porcelain quite often with those bits and can drill dozens of holes with a single bit.

[@Rellikman]

Oh my gosh!!! Get a spray bottle and keep your bit wet. Shaking my head, maybe you prefer Anal without lube too.

[@neomacchio4692]

Which bit 😂

[@karanmakhija]

Buddy I had Diablo bits and it took 4 of them to make one hole omg

[@explorer47422]

But it takes me a good 10mins for a single hole! Often feels like I'm going nowhere

[@feras04]

​@@karanmakhijatry Milwaukee...and if u go slow and stop frequent to water the bit and cool it..u should be good

[@ptfilms4348]

Thank you. This information was just what I needed.

[@mikeberger1688]

you just taught me the "tip" technique when starting the hole -- thought I had to buy a guide. EDIT -- actually, I did this......buy a fender washer with a hole the size you need and duct tape it. Use that as the guide. Works perfectly.

[@trvswst]

The washer tip is brilliant! I was worried about hitting the mark, so I taped a washer over it. Worked like a charm.

[@suds2you]

Many thanks...

[@wardlapaglia8438]

Great vid! I bout the diamond bit and drilled 4 holes. Found if I dipped it in water as soon as I saw it getting warm, it cut much more quickly. Thanks!

[@randomtux1234]

4:53 ...a couple of obvious BITS... loved it

[@luvit579]

I went thru 2 1/4 inch $18 bits from Home Depot working on 4 holes. I got a $10 Bauer bit at harbor freight that finished up all 4 holes no problem.

[@johncarlson7955]

Awesome video!. I just tried drilling my porcelain tile with concrete bits and glass drilling bits, wish I seen this video.

[@wilmerfajardo8488]

Thanks for your info. It helped me install a grab bar

[@coreplus5616]

Some good advice, great video. Technology has moved on since this video was made. CorePlus make diamond tile drill bits that can drill upto 40 holes in an 8mm grade 5 Porcelain tile.

[@14chstr]

Oh ok, I thought I did not know how to drill on tiles or my drill was not capable of drilling on tiles. After watching this, I realized I was drilling on a rigid tiles. I just need a right drill bit. Thanks.

[@bobjohnson2172]

Thank you very much, excellent presentation!

[@paullefur6213]

Nice vlog mate, had some diamond coated bits, but ordered ones now that will do porcelain tiles, in the process of tiling a walk in shower the first tile type was ceramic with a glass tries a few practice holes with non coated diamond bits worked okay then the missus found another tile yep porcelain so have gone for diamond coated wax coated bits, thanks for the advice.

[@LawtonDigital]

By my best estimates, you just saved me some time and money. Thanks!

[@HighlandLeos]

Great informative video, many thanks!

[@grahamleathwood8505]

Brilliant video, very helpful. Just feel that little bit more confident tackling my porcelain tiles now. Thank you.

[@afterburner2869]

I had success with starting the hole with the expensive diamond bits and finishing the hole with a masonry bit.

[@BillMorley-o9n]

Great advice and very well presented - thank you!

[@timborelli]

A very useful vid with some good information, however, I gained equally as much from reading all (most) the comments below. Clearly the bit is the right one to use, but cooling the bit during and after each hole seems vital to maintain performance and bit life! I think the skill is getting the initial 'bite' in the right place, once you've achieved that, it's a matter of cool gentle grinding. I feel a little more confident about my first porcelain hole, just need to get it started in the right place! Thanks

[@LondonKen-bk4vg]

Really helpful, thank you for posting

[@keithgyles9826]

Thank you. Starting at an angle, great tip.

[@BoschProfessionalUK]

Hey! Just thought you should know... the new Bosch EXPERT HEX-9 HardCeramic is suitable for ceramic tiles, including porcelain up to grade 5 hardness, roof tiles, non-tempered glass and natural stone with a maximum thickness of 10mm. Might be worth giving that a go too!

[@samlau2852]

Thx for your informative video. Q1] The larger bits become hollow and not closed tip. can they be used to make holes in tile & concrete in one drilling mode & one drill bit and one push? Q2] Are they suitable for glass drilling? How about stainless steel plate 5mm thick? Will they give better results than those ss steel drill bits ?

[@mikehankey1612]

Arrow head bit- 4 holes cooled with spraying water whilst drilling - 10 for £7.50, will carry on as usual thanks

[@skyhookspirits]

Thanks, it helped me greatly.

[@maheshchauhan9290]

Brilliant video, well explained, honest, sincerely shared and extremely helpful. You have a subscriber in me. Cheers mate 👍

[@sheltermutts4185]

Perfect! I’ve been stressing about having to drill holes in my tiles for a new toilet. Wondered how I would start the diamond bit I ordered. Many thanks from Montana!

[@jkfishnhunt684]

I asked a simple question how to drill through porcelain tile and we turned a two minute video into a 10 minute video but I guess that's how KZbin works

[@franbones]

😂😂😂

[@harrywombat3112]

I like your suggestion to buy extra fixtures because when they are discontinued, you can't find the same thing, or something with the same fit.

[@majdq8]

There is a new drill bit from BOSCH called HEX-9 hard porcelain drill bit. Much better and faster and lasts tons of holes if you water cool.

[@suds2you]

Many thanks...

[@ironix1]

Nice video Gonzo. Helpful tips.

[@anilabbaraju1]

Hi nice review i couldn't hold the drill steady like my drill goes all over the tile please suggest me how to hold the drill steady

[@auctionmusic]

This was helpful. I'm using water to cool off the bit seems to help out (as per the instructions that came with the bit so not my idea). Also, starting at the 45 degree angle is also instructed for using the bit. This video helped me to actually read the instructions before using heh...thanks again

[@rachavya]

It's clear what style bit is required for porcelain. In my case, however, I am drilling narrow-diameter holes in glazed ceramic plant pots (to facilitate water drainage). My first thought was to buy a pointed bit such as the one you showed and rejected for porcelain. I'm guessing such a bit would be fine. However, if I wanted to be ready for ANY eventuality, including one day drilling into porcelain, may I assume the bits you're recommending would also work well on my pots?

[@nicholasjohngarofalo8216]

Ive used these bits on 1/2 floor porcelain that was used as a wall tile. 8 holes took 2 hrs....

[@edwardkwan4916]

Thx. Very clear and useful advice.

[@wakeuplearn]

My life just flashed before me , fighting with these tiles . Skipping , hot bits , etc Lol

[@GeorgeLeenyc]

Thanks best video on this!

[@stotchmania]

Great video. Thank you 😊

[@denisfortin5631]

Instead of drilling dry have someone add water with a small paint brush to cool down and therefore extend the life of the bit. They add water when drilling into rock using diamond tipped drill rig.

[@brickrightbuildinglandscaping]

Top tips and advice thanks for sharing 👍

[@CR-xl7zu]

Toilet Bowl Final Score: Porcelain Tile: 1 Tile & Glass Bit: 0 Game Recap: Tile & Glass Bit started off well, easily making tiny starting points in all six holes for the toilet flange without walking at all. Confident and coming around again to finish the holes, TGB was stopped dead halfway through the first hole by Porcelain Tile with seemingly no effort. PT snapped off TGB's pointed attack and reduced its flanks right to the shaft. That was the end of TGB's offense, and PT ran out the clock.

[@CR-xl7zu]

Nope, I just didn't listen. Had to see it for myself, but PT wasn't so lucky when I pulled out the diamond hole saw for the next game.

[@suds2you]

Hilarious!

[@truenorth179]

You gotta cool it with running water. As others have said. Dramatically extends your bit's life.

[@alexitosrv]

Do you have to change bits to a masonry one when you go deeper after the porcelain tile? or the diamond bit is good enough for it to traverse the concrete where the tile is attached to?

[@mattissakw]

Great video and well explained thankyou

[@joegoh1968]

cool .. didn't know such bits exist!!!

[@tonimagery]

Great tutorial! Do you have to wait for the bit to cool down before each hole?

[@loafersheffield]

I drill for about ten seconds, don't push too hard and dip the bit in cold water. At £20 ea. cooling prolongs the life span.

[@arniekrieger3790]

lubricate with water while drilling

[@21gonza21]

I’ve done a few holes on porcelain with ceramic bits and tool ton of elbow grease and could not get accurate holes wish I saw this video

[@paullefur6213]

also seen another tip, if the bit is taking longer to get your hole its been suggested to drill through something like a brick this re sharpens the diamonds as they get clogged up with tile crap not tried it yet,

[@rossmacallister664]

They come wax filled to keep them cool now. Guessing you can rewax them after drilling?

[@pawezawisza7436]

After using ceramic bit on my tiles for 1 hour and getting nowhere I checked the order details for when I was renovating the apartment, and sure enough - the tiles are porcelain. Getting the diamond bit then.

[@KENNETHEMorse]

Very helpful.

[@bathroomplumbingandfitting7089]

Glad it was helpful Kenneth

[@kevinbenstock8116]

Hi mate, subscribed to your chanel, very good, how would you cut or drill around radiator pipes in the floor or pipes coming out of the wall, also cutting tile around a WC if the customer dont want to take it out and go under it, thanks mate keep up the videos

[@robertedwards3551]

Ohhh!! I see. Many thanks 🙂

[@Cloppa2000]

Is there any point to start with a smaller bit first. Sometimes I'll do this in very hard brick or concrete. Can the same be done in porcelain? MT.

[@kabal911]

No, there would be no way to center the larger core

[@barrydoherty636]

Good work, well done.

[@knottstarr]

I have the same drill bit, the same drill and it takes me 10 min to drill a hole... not sure where I'm going wrong? Unless a faulty drill bit

[@garathjax420]

Use water and get months. 110 mm bit is class for round internal vent covers

[@bathroomplumbingandfitting7089]

I have the sets from 11mm all the way up to 110mm as well as the jigs and they are very good and the rad pipes were cut in using 16mm bits. However this is really a video for people who will want to drill and hang something once and won't have or need a full tiling kit.

[@garathjax420]

Install the aliexpress app and they will ship them to the UK. I'm in ireland

[@garathjax420]

I can get months out of bits. I even have a 40 mm one we have named the red bit cos it's got red electrical tape . If ya like i can send you a link

[@alexthomson7465]

How do you know if you have ceramic or Porcelain in an old bathroom?

[@nobbystyles4807]

holy fking shit..... those things are fast! ive been doing this with masonry bits for years. got a shower screen to fit tomorrow, looks like scroofix are getting my money again

[@MyTBird57]

You need to keep the bit wet as much as possible and it will last a lot longer. I drill porcelain a lot and a bit lasts way more than what you are getting.

[@donnastarkey7619]

I notice you use the drill on number 2, the higher speed, I thought they were meant to be used at below 750?

[@arniekrieger3790]

the slower drill speed the better and the drill bits will last forever if water is being used to cool while drilling.

[@jwfoster74]

Great vid thanks

[@marktighe-crea3038]

Thank you

[@claclako]

Does this work if the back of my tile wall is empty? I noticed my bathroom tiles weren't fully laid with cement behind them

[@bathroomplumbingandfitting7089]

You'll need a hollow wall fixing because there is nothing behind. Be careful not to hang anything too heavy on there

[@AdrianJayeOnline]

the action starts at @5:00 min mark

[@alanmcampbell]

Can you use a torque drill?

[@shazj1842]

Before this video I just watched a kitchen and bathroom fitter use Bosch Tungsten Tip 4 mm bit costing £2 to do this in under 2 mins, he didn't rate diamond tips to put it politely. Just an alternative point of view.

[@helenarichard]

So I can never use tile drill bits on porcelain? I have to buy a diamond drill bit?

[@YelpBullhorn]

Well that looks better than mine. Because I bought a Vitrex one from B&Q to drill 8mm porcelain tiles, and each hole takes about 5 minutes and drains the drill’s full battery. And hurts my arm!

[@zakikramer3809]

Great vid... can you let me know what power drill you’re using?

[@binnsbrian]

Good advice. Thanks

[@bathroomplumbingandfitting7089]

Thanks Brian

[@mattissakw]

Hi looked for the fixing towel rail rad vid but couldnt find one as I have plaster board wall and ild rad was fitted using in screw in fasteners for plaster board but new rad is taller and same as the one on vid any help please our tiles are porcelain too like ones in vid

[@Iceblizzard]

Brilliant 10/10

[@Gordonwallace-yr1if]

How Thick Are the Wall Tiles ? Cheers ..

[@philtaylor3098]

Good stuff.

[@MrJspeskoff]

You only get 4 cuts out of your diamond bit is because you are drilling dry. They should be constantly wet. Think of low little life you'd get from a tile saw blade if you cut tile dry.

[@cardaleh9284]

So true

[@eskurian8565]

Does it also help to switch out the diamond bit for a masonry one after you're through the glaze? Or after the ceramic underneath? Seems fine for the wall underneath at least; I don't know if like standard concrete actually diminishes this type of diamond bit fast.

[@davewatts79]

I use the same bits but keep them wet as much as possible, it's hard work but do get a few more holes from them

[@regionvoices6607]

What brand is that bit the ones I found just have the cutting on the very edge The one you used has a 1/2" diamond cutting on the bit

[@garathjax420]

I get mine from aliexpress. Cheap as chips. And if you find the right shop you can get 15 piece set for 7 bucks. A makita set will run 100 bucks easy

[@bathroomplumbingandfitting7089]

Wow, that really is cheap Guy. We can't get them for anywhere near that price in the UK. 😒

[@garathjax420]

@@bathroomplumbingandfitting7089 ill drop a link here when i have a min to find the shop I buy from. These bits are the dogs. You get ages out of the bigger sizes. 14 mm upwards. The smaller ones you get what you'd expect to cos it's the heat that kills them

[@brohemian]

@@garathjax420 link mate?

[@donnastarkey7619]

going to share the link -- never quite sure with ali express... I've fund it hit and miss

[@alanmcampbell]

impact driver?

[@acatnamedmewmew3020]

weren't you supposed to be using water to spray onto the hole as you go?

[@shaneluxton8216]

Just watch the video and would like to point out that all these vacuum brazed drill bits should be used with an electric drill due to the speed needed to get the maximum effectiveness from the drill bit and prolong the life of the drill bit. The wax inside the bit will then melt at the correct rate and replacement wax is also available to refilled the wax bit if needed. Not saying using water won't help but not sure its necessary if using the correct drill, its all in the speed of the drill cordless drills are easier to use yes but not the correct drill to be using.

[@suds2you]

Many thanks first off. Should we drill fast or slow? I'm used to the speed of a cordless Makita! Thanks again...

[@shaneluxton8216]

@suds2you drill on speed 2 if using a 458/453 cordless but if using a corded drill just plug in and drill

[@suds2you]

@@shaneluxton8216 thanks again sir...

[@Jt-cc9qz]

Also check out the armeg system which is about one of the best but the drill bits are quite pricey

[@Cannonball62000]

Thanks for this video! I love your channel, great for ideas and how to's. I have a question please, how do I know what my tiles are? I have moved into a place with a fully tiled bathroom and have no idea how to tell the difference! Help please!

[@bathroomplumbingandfitting7089]

That's kind of you. Are you able to send me a picture message on here? If not you can post a picture on my Twitter which is @WeFitBaths I'll take a look and see if I can tell. Take a couple of close-ups and also the edge of the tile. Generally a porcelain tile will be the same colour all the way through. A ceramic tile will have a glazed finish on top which is a different material and colour from the rest of the tile.

[@quatermass8]

I love the advice at the end to but a few of the same metal fixtures for the occurrence of rust!