Battery replacement for Panasonic ER1611 hair clippers

[@Xathroz]

At 5:56, your leaf spring (the clicker for the dial) is upside down. The little bump should point towards the top of the trimmer, so you get a satisfying click when you turn the dial.

[@professormosheeinat1096]

helped a lot! thanks! the rubber direction is not so clear/ also pay attention to the spring when disassembly.

[@ravivo2001]

the editing and the marks on the "plastic part" shows you had hard time to remove it. why not mentioning that and show how you did it eventually? thanks for the video

[@matthewp5478]

I ended up using a dremmel to drill a hole where the screw is. The hole allowed me better access to pry off the black plate. Before I did this I tried heating it up with a hair dryer to relax the glue. That did not work. Drill a hole, it’s easier.

[@WTF00007]

Thank you that was helpful. I’ve used some batteries made in China which arrived without much charge - so will see if they are up to standard Your video was helpful

[@HolyNarz]

You assembled the silver little bracket for the wheel wrong! It's not working correctly that way!

[@kayjanssen3689]

Exactly, you have to mount the silver bracket the other way around as shown in this video.

[@awdadwadwad1723]

You put silver bracket wrong side up so the wheel isn’t clicking anymore!!! And you didn’t show how to demount black plastic cover from the top, which is pain in the ass.

[@jinwooyoo7491]

Perhaps. Do you know why the red light blinks even after replacing the battery?

[@horstk.6929]

...vielen Dank. Geniale Anleitung !!!

[@kobigabay6797]

There is a mistake here!!!! The leaf spring under the switch is assembled upside down from the moment of the initial disassembly, it is upside down and therefore the switch will not work properly

[@Tendeep4]

Exactely

[@haloubi-n2w]

May I know the machine does not work green keep the red light. Kann you help me.

[@louisdelautre]

Merci pour le tuto ! ça m'a bien aidé 😉👍

[@WTF00007]

What’s the part number of the replacement battery? Thank you 🙏

[@referencement2055]

Merci beaucoup !

[@dhamma9306]

Thank you for your effort showing this. However for ME this is close to ROCKET SCIENCE :)

[@tanyabaryka]

😅

[@ΚώσταςΠαπάζογλου-σ7ψ]

I replace mine also because the last year I was using it only on the mains. The batteries died. I ordered exactly the same batteries as you, but when I charge the light remains red. Left it for 3 hours charging the green did not light up. It is working now with the batteries but I don't know how long they last. I will see on my next use. Are yours charging and the green light turn on?

[@domoticsblog]

On the ER1611 the led doesn't turn green when charged. It goes from steady red light (charging) to blinking red light (charged).

[@cahauhanm511]

its rechargebal battery is Available. In India. ? i am in iindia. please help me .

[@IsakHassani-h1v]

Thanks

[@Ariel7877]

Tks a lot my friend!

[@mr.tarkiak4720]

Danke sehr hilfreich ;)

[@ankithedau1137]

can you make the video of Panasonic Battery replacement of ERGY10K body groomer trimmer.

[@wormlia]

Thanks very much!!!)

[@hondabigone5059]

Thanks a lot. NICKEL !!

[@benknoop5569]

THNX!

[@ericmansuy9565]

super j allais la mettre a la poubelle ca remarche impeccable pour 11euros,merci.

[@melissarenaud2748]

Bonjour, quel était votre problème de départ svp ? Car la mienne sur-chauffe a l’utilisation et je ne sais pas si c’est ça la solution ..

[@laurentf849]

Hi Friend, Thanks a lot, it works :)

[@shahabarjomand4778]

Thanks man for teach me

[@משתמש-ע7כ]

מאיפה אפשר להשיג את הבטריות האלו?

[@yasserragab5169]

رااااائع رااااائع رااااائع

[@clubbizarre]

The wheel feels less clicky now but i don't care i only use 0.8mm

[@clubbizarre]

Thanks otherwise i would have been lost

[@michellele7976]

Good

[@florvasquezr]

put it apart is so easy....... mine ended up in the garbage

[@thebosszaed]

You only did one thing wrong, if you admit it I will respect you more

[@mohamedaddukali9437]

Prices er1116

[@KWARLO]

Une vrai galere

[@claudiareis6173]

Better buy a trimmer with an easier way to replace the battery! Manufacturers like this should go to hell with their stupid ideas!

[@kobigabay6797]

There is a mistake here!!!! The leaf spring under the switch is assembled upside down from the moment of the initial disassembly, it is upside down and therefore the switch will not work properly.