Make sure you use the purple aviation thread locker my man.
@BauersLab2 жыл бұрын
Yeah, i got a whole new bottle for this project.
@chriscunningham51502 жыл бұрын
@@BauersLab The travel platform you designed for the hitch is pretty genius. I venture to say I would definitely purchase one if you sold them. Could be something you could sell on the side if you produced more. It inspires me to try and make one of my own. At at least try. 👍 Great video sir.
@ryangibson69053 жыл бұрын
I like your WRX! Recognized the model at 8:40 I've been toying with the idea to make a PSOC controller for the third brake light using a BSP75. I'll let you know once that's implemented on my WRX. Thanks for the great videos!
@BauersLab3 жыл бұрын
Ha, nice. Definitely let me know how that goes.
@jimcr1203 жыл бұрын
Greetings. I also trained at Aviator and now have a Defiant but not with the ACS, not the Factory R (185 Plus), not the silver arms & spars (green), and though I was initially sold the SupAir harness I swapped it out for the roomier Air Comfort. I don’t think I miss the ACS but do prefer the silver look a lot over the green. One of my biggest concerns is the prop clearance at the lower spars but a profile view of yours looks like it has much more than mine (~2”) from prop tip to spar. Oh and I also fly a Kona but mine is a 1st Gen 29. Congratulations!
@BauersLab3 жыл бұрын
That is interesting about the clearance. Are you taking about axial clearance or radial clearance? I wonder if they changed it because i was hearing about trouble with props hitting the ground on butt landings. I have had my fair share of butt landings but no issues with the hoop or prop.
@jimcr1203 жыл бұрын
@@BauersLab I mean if I turned the prop to its closest point to the lower left spar, all it takes is about 2 inches of flex in the prop to make the tip touch the spar. I’ve had 2 but landings, both on long wet grass at the same field. The 1st time a spar mount screw broke and the net got nicked (I typically kill the engine right about when I’m touching down). I replaced both lower aluminum spar screws with stainless steel. I’ve also put in a prop spacer and removed the top 2 engine mount spacers to slightly change the angle (reducing the clearance at 12 o’clock slightly to increase clearances at 5 & 7 o’clock). I would have liked if their instructional video had shown a completed assembly from various angles.
@BauersLab3 жыл бұрын
Oh ok. I had one of those aluminum bolts break too and replaced it with stainless. That seems to be a needed change. I'm not able to flex my cage/prop enough to get them concerningly close.
@jimcr1203 жыл бұрын
@@BauersLab I did have a chat with Gravity and even though they’re incorporating these changes they downplayed the significance to me in the chat which seemed puzzling. Did you train in Lake Wales or Dunnellon? I trained in Lake Wales and have since started instructing there, still a newbie.Where are you now? I’m in NC.
@BauersLab3 жыл бұрын
Yeah I'm not sure that it was actually a big deal. I would almost be willing to fly it with that broken because it is held by do much other stuff and that wasn't really doing much. But i didn't because tend to be quite thorough about such things.
@Jerry-lt6cm3 жыл бұрын
Hey I got the defiant with the dudek can you mag me detailed how you installed it I just did regular way tonight and it's way to low on my back can't really tell how you did it from your video
@BauersLab3 жыл бұрын
Well, i left that out on purpose because I'm not sure i want to take on the liability of telling people exactly how to do it. I will say, though, that i ran the aluminum bracket through sewn loops in the harness and then i cut off the straps that would normally wrap around a tube. You may not need to cut them, they were just in my way.
@junaida.15423 жыл бұрын
Where'd you learn to fly? How do you like the paramotor so far
@BauersLab3 жыл бұрын
I trained at aviator ppg in dunnellon. I'm really enjoying the motor. It is a bit heavy but i like how much i can customize it.
@Handlethis3423 жыл бұрын
Bauer, have you considered upgrading to the Helix 140 prop to maximize your Factory R?
@BauersLab3 жыл бұрын
I have actually. After thinking it through, i think I'll eventually upgrade to the 135 e-prop three blade. That way i still have good clearance.
@shahram6773 жыл бұрын
Thanks for nice video Im gonna order gravity with 185 engine I was wondering what size and brand you recommend for wing? BTW I'm 180lbs and I'm beginner Thanks Sean!
@BauersLab3 жыл бұрын
I'm really enjoying my ozone kona 2. I don't have a lot of experience with wings though.
@BauersLab3 жыл бұрын
I'm around 190 and i use a 27 btw.
@ArionRaine3 жыл бұрын
You are wrong about the throttle cable keeper. it is not supposed to be crimped connection. You will be sorry if you use a crimp. Use the sleeve, sleeve spring and keeper as intended. Also, you did not need to cut the buckles off the Dudek harness.
@BauersLab3 жыл бұрын
Yes, that is what i ended up doing. Also, i agree with the buckles but they would be very bunched up back there where i would want to route my reserve lines.
@spaickmanchas88583 жыл бұрын
Por que siempre usan motores de 2 tiempos?
@Accurize2 Жыл бұрын
Lightweight for the power you get and easy to work on.
@LlamaNewton3 жыл бұрын
The State Anthem of the Soviet Union is a somewhat odd choice of flight music, but suitably majestic and orchestral, lol