BB30 cup/bearing press tool - make it yourself

[@arikpeterson6260]

I really appreciate your videos. Keep up the awesome work. Cheers from Fort Collins, CO

[@KEEPINITRIL]

This is an awesome tool! Also, kudos for using the file properly, not many know the skill anymore

[@EarlSorensen]

Bravo mate, superb as usual. Love your simple videos! Keep up the super work!

[@cesarblanco]

Great video and brilliant idea. Thanks for sharing.

[@adampearson2357]

If you’re going to do this please use a Loctite 609 to retain the BB30 bearing when mounting directly to the shell. DO NOT GREASE.

[@DANIEL-ls5ku]

This I'll do, thank you for sharing..

[@xsnwbrderx]

Do you know the difference between the Loctite 609 vs the Loctite 641?

[@stevenleffanue]

Yes,for details you can google it Ryan.

[@fabioaugustogentilin1736]

Very smart! Congratulations!

[@okbbartini255]

Hello and congratulations for the contents of the channel, really useful and interesting. What is the difference between the orange and the gray cap (apart from the color)?

[@stevenleffanue]

Grey for bb30 , orange for Shimano 24mm bearing.

[@DANIEL-ls5ku]

THANK YOU!!!

[@fckinnonstick9919]

I wonder if this also works on Headset cups?

[@31acruz]

Can you use the tool to "remove" the bottom bracket ? if not have you made a tool for that purpose, stands to reason if we put a new one on, we will very likely have to remove it first right?

[@stevenleffanue]

+31acruz yup...it should be on the vid... "Bike creaking? Service it yourself"

[@31acruz]

thank you

[@johnfraser6494]

oz cycle bike creaking

[@jamonzonv]

Thank Oz for your creativity and Engineering! How can we use this tool to extract the bearings?

[@stevenleffanue]

Its only a press tool

[@jamonzonv]

@@stevenleffanue And do you have any suggestions for the extraction? I found Hambinis tool, really interesting.

[@stevenleffanue]

Easiest is 8 inches of a broomstick

[@bahkbahksa8339]

Smart and Exellent engineering ..........

[@johnbeedham3010]

Thanks ... another good tool!

[@bartoszdunowski3613]

Top man tool!

[@esanchezp]

What is the orange piece called and where did you find it? Also what's the size of the threaded piece and nuts? Overall is a great diy tool to have handy. Thx for sharing

[@stevenleffanue]

+E. Sanchez Not sure what the orange piece is called but usually not sold seperately....standard tap connector. The threaded rod is 5/8... +nuts to fit.

[@ivanboesky1520]

Very nice video. Will this tool work for pressing the cups into a 386 EVO style of bottom bracket shell? thanks

[@stevenleffanue]

+Bob Gardner Should do Bod... 386evo has inner diameter of 30mm.

[@ivanboesky1520]

oz cycle Thanks. Great info, and your vids are top notch stuff!!! A+

[@pskonejott2568]

do you have a tool to remove BB?

[@jammydodger7726]

Fuck me. By the time you've fucked about with all that you could have ordered one from Wiggle.

[@alejandrog553]

Thank you for this usefull video! Do you have a video for bb92/86 for shimano? Its for a MTB.

[@stevenleffanue]

+Alejandro Gómez This tool should do both Alejandro

[@palpatine1975]

Hi oz can you tell me it's awesome I've manage to get most of the materiala from the hardware store but where did you get the bearing press cups? Did u buy it?

[@stevenleffanue]

palpatine1975 facebook.com/559782270843560/photos/a.730913753730410.1073741839.559782270843560/730920647063054/?type=3&theater

[@stevenleffanue]

+palpatine1975 The cup presses are garden tap adapters

[@georgesolomon5696]

What's the name of the black garden adapter piece you used? Thanks

[@stevenleffanue]

1" or 25mm threaded to19mm barb

[@cammac3805]

Hi, really enjoyed the vid. Will make one for my BB86 pressfit. if I’m not mistaken I think the thread on the poly barb is 3/4” (20mm) not 1”. The female side of the tap fitting adapter is certainly 3/4 and the male thread side is 1”.

[@coolmusic1579]

I need to get grease syringe, where'd you get yours.

[@stevenleffanue]

Aliexpress...about $5

[@suprapto_865]

what size bearing do you use for bb r60?

[@stevenleffanue]

To suit Shimano crankset , it's 24x37x7 or the sleved version is 25x37x7

[@stouto11]

Hello, what are the black plastic parts called? Thanks.

[@stevenleffanue]

+stouto11 Barbed connector. All descriptions of parts are at "Oz cycle" on Facebook...Albums....DIY5

[@MitchellVamos]

Did anyone else try finding and purchasing the grey tap piece and the black barb piece? I couldn't find either part at Home Depot. Anyone find them and have a link they can share?

[@MitchellVamos]

The closest that I could find online (but is 3/4"): a.co/d/jdTLWi1

[@erwins3803]

genius!

[@stevenleffanue]

+Erwin S Glad you like it Erwin....some things are simple to figure,others not so :)

[@erwins3803]

thanks for the inspiration ;3

[@antoniosanillan2155]

hola oz! is useful for press fit 92. thanks!!

[@stevenleffanue]

+antonio san illan Should be fine for press fit 92,Antonio, as it uses 37mm x 24mm bearings.

[@antoniosanillan2155]

oz cycle thanks!! i made it!!

[@Robinators]

Have you got a tool to get those bearings out?

[@stevenleffanue]

+Robinators Yes,in video coming up..."service your own bottom bracket".

[@BrianMaynardLetsDoThisThing]

What type of grease are you using?

[@stevenleffanue]

I usually use white lithium grease, Brian. I know when things need cleaning and regreasing because the grease looses its whiteness with dirt.

[@ameerbashir9235]

Center berackit bearing size of 26 inche montain cycle

[@zbyszekrusiecki6793]

Konstrukcja-Wieża Ajfla :)

[@DeepakKumar-lv4te]

fab