Those saying he shouldn't use a BCM BCG because it's not a Colt... BCM uses Microbest with additional Q.C. and then BCM laser engraved it. Colt uses Microbest with additional Q.C. and then Colt adds a C (in most cases) Colt missed something on their Q.C. end. I have also seen many BCM BCG's with problems.
@savagegentleman35834 ай бұрын
The fact that your new BCM BCG functioned properly makes me feel even more confident that the gas key on your Colt BCG is likely the problem and I would lean toward a broken carrier key screw that you wouldn’t know was broke until you attempted to remove it; the staking is keeping it in. I would try that Colt BCG in another rifle that had been working fine.
@THEPAGUNGUY4 ай бұрын
Yea I put that colt bolt in the AR15A4 and it doest work
@savagegentleman35834 ай бұрын
@@THEPAGUNGUY Excellent. Well, if Chad at SOTAR can’t get around to fixing it, I would be happy to take a look at it for ya. Just let me know.
@Ben-t1s4o4 ай бұрын
BCM was a solid choice for this purchase.
@9877joseph4 ай бұрын
Mine came in a plain box with BCM on the side. Love it!
@cadamsm114 ай бұрын
Glad to see you’ve got it squared-away! I’ve used Microbest-made bcg’s, no problems. Kind of sorry that Colt won’t stand behind it more. I had a firing pin break on my Henry (I know, apples and oranges), and they mailed me TWO replacements, no questions asked.
@aftermath23334 ай бұрын
Cool video brother I have the same BcG with Noveske carbine buffer and spring runs like a dream for a 11.5. You look happy with the results looks like it’s ejecting beautifully
@ThatsAmore2142-mz1dj4 ай бұрын
Great ejection pattern with the new bolt and buffer. I wouldn't give up on the colt bolt though. See if SOTAR will take a look at it and see what's out of spec.
@THEPAGUNGUY4 ай бұрын
Yes I’m working on getting it to him when he has time hoping he can fix it.
@Mike805284 ай бұрын
That's "School of the American Rifle" (a great KZbin channel on AR's) for those who don't know what "SOTAR" means.
@MH_61604 ай бұрын
BCM is solid… I have had the same BCM BCG for 7 years without a single issue. I run it in two different uppers, a 10.3 and a 13.7 I probably have 7500 rounds on it combined. Finally started to experience wear on the gas rings…
@ratagris214 ай бұрын
Glad to see that this a fixed issue for you.
@brandonschwietzer87574 ай бұрын
BCM to save the day Now you gotta try to run the BCM bolt in the Colt carrier and see if it functions. Then you can determine if you have a spare bolt or a spare carrier laying around
@pugger014 ай бұрын
If I had been thinking this through, I would’ve suggested asking any company for a replacement BCG, and I’m exchange you would mention them on air as the replacement to the defective Colt. Yeah, I work in marketing! And and a Colt fanboy, but like HD they have been resting on their laurels and the competition is now the same or better.
@declineofthewest.4 ай бұрын
I like the way you think
@THEPAGUNGUY4 ай бұрын
That’s actually a good idea I never thought about that! That’s kinda one of the reasons I went with BCM I figured it was a slap on the face for Colt to have that big white BCM BCG in it. And when people ask me why I can tell them about colts warranty and customer service
@Jrude224 ай бұрын
Damn bro be optimistic in life. You sound so sad, it’s all good though. Be happy next time!
@THEPAGUNGUY4 ай бұрын
Yea sorry I know I’m not the happiest sounding person and when I shot this video I just got back from spending a full day at an amusement park and I was exhausted. But I’ve often said that to myself as well.
@bmeng81953 ай бұрын
This is unrelated to the video, but I noticed from your other videos that you have both the standard 16" 6920 and 14.5" socom. Can you tell a difference in handling and maneuverability between the 2 barrel lengths? As always, great video and keep em coming! Thank you!
@THEPAGUNGUY3 ай бұрын
Not really the main difference for me is cosmetic I really don’t like the look of the 16inch barrel. With the carbine length gas system. It maybe alittle better balanced as well not it’s not that big of a deal. If ur trying to decide between the 2 I say the socom but not for the barrel length but for the socom H-Bar barrel.
@Enjoyer.7624 ай бұрын
Did you try putting the problematic Colt M4A1 BCG in your other Colt AR15A4?
@THEPAGUNGUY4 ай бұрын
Yes the AR15A4 will not work w the M4A1 BCG
@shanewhitted14 ай бұрын
My whole comment gone…WTH?🤦🏼♂️ I’m not retyping it. Just enjoy you firearm man! I have a feeling Colt is gonna make this right for you!
@THEPAGUNGUY4 ай бұрын
Your comment is still up you posted it on a different video.
@rifleshooterchannel2084 ай бұрын
I forgot to ask. Did you put the “bad” BCG in a known good rifle and test it?
@THEPAGUNGUY4 ай бұрын
Yes it does the same thing no matter which rifle it’s in.
@rifleshooterchannel2084 ай бұрын
@@THEPAGUNGUY Damn 🫤
@armorers_wrench4 ай бұрын
Can't go wrong with a BCM BCG. You should send that Colt BCG to Chad at SOTAR for a physical/autopsy. Heck, he might even be able to repair it and then you'd have a spare. BCM BCG is definitely worth it though. It's much better than all these crappy nitrided carriers we're seeing on the market. I have never seen any proof that BCM actually does use Microbest but I assume that its true. Either way, they do a whole bunch of QC on the bolt and carrier that most manufacturers do only in batches. BCM does it to every single carrier. I'm currently building an upper. Going to be a SOLGW stripped upper with their m89 rail with a Geissele 12.5" Taper profile barrel with their "bomb proof installation" gas block. I'm debating on just throwing another BCM BCG in the upper or shelling out the cash for a Geissele RBCG which is actually a very nice bcg but boy are they proud of those. Hopefully its on sale for 4th of July. Until then I'm gonna run my spare Microbest. The rifle will be shot suppressed most of the time so the Geissele DLC carrier actually would be a quality of life improvement. Eventually this upper is going on a Griffin Mk2 ambi lower but for now its gonna go on my SBR lower until I get the MK2 and set it up the way I like to setup lowers+register it as an SBR.
@THEPAGUNGUY4 ай бұрын
I did talk with Chad I’m hoping to send him the BCG and I’m hoping he can fix it! Yea I’ve been tempted to order another colt BCG I still may
@TheSundayShooter4 ай бұрын
The only downside is the massive engraving, but it still 5:27 looks pretty cool. Your old BCG should make for an interesting SOTAR episode
@declineofthewest.4 ай бұрын
Be proud of that big ass BCM engraving!
@Autowill4 ай бұрын
Arms unlimited has the Colt BCG's on sale right now if you wanted to keep it all colt. Then you would have an excuse to buy a bcm upper to put the bcm bcg in, and if the new colt bcg didn't work it would be under warranty. Just an idea I thought i'd throw out there. 👍
@alphasierrahotel74 ай бұрын
SOLGW are a solid buy too and can be found cheaper when PA has a sale
@THEPAGUNGUY4 ай бұрын
It was very close race between the 2 to be honest
@davidschaadt34604 ай бұрын
I bought one for a build. Real good 🏆
@johndecker99834 ай бұрын
You should probably use the safety selector a little more often, not to be that guy, but, the safety shouldn't come off til you're on target and ready to fire, off the target, off the trigger, safety on. Practicing safe weapon manipulation when you're alone on the range is just as important as when your not. 👍 just my 2 cents. Glad you got her running again.
@THEPAGUNGUY4 ай бұрын
Yes your 100% correct I got in the habit of using it more then I use to but still need to work. Thanks for the advice
@johndecker99834 ай бұрын
@THEPAGUNGUY thank you for the content and being approachable. Each one teach one. I'm a gun guy in PA myself, gotta stick together. 👍
@hairydogstail4 ай бұрын
Did you check head space with the new bolt?
@THEPAGUNGUY4 ай бұрын
I did not I’m aware your suppose to however i was counting on both parts to be in-spec. Fired cases appear to be fine
@hairydogstail4 ай бұрын
@@THEPAGUNGUY Odds you will be good..BCM makes a great BCG's, hope it solves your problem..
@BaconSlayer694 ай бұрын
@@hairydogstailBCM just makes a whole good AR15 to begin with
@chuckfinley31524 ай бұрын
The bolt doesn’t have that signature ring of chrome it could be an AO, either wsy bcm wouldn’t put their name on it if it wasn’t gtg no matter the oem.
@rifleshooterchannel2084 ай бұрын
2 of the 3 BCM BCGs I got in complete uppers from BCM were definitely *NOT* good to go despite having BCM’s name on them.
@chuckfinley31524 ай бұрын
At this point I’m going to get the pin gauge specs for bcg’s and do my own qc and replace everything with springco stuff
@rifleshooterchannel2084 ай бұрын
@@chuckfinley3152 That’s one way to do it. I’ll stick to buying known good stuff and keep Springco out of my guns.
@THEPAGUNGUY4 ай бұрын
Yea it seems like a gamble no matter what u buy now a days. I’ve seen BCM put some bad stuff out like everyone.
@MitchC3574 ай бұрын
Send bolt carrier back to Colt.
@THEPAGUNGUY4 ай бұрын
I tried I called them 2 times and the 2nd time I asked if I could just send them the BCG so they can gauge it and see they told me no. I had to send the hole rifle. I’ll be making a video there’s also one more thing I haven’t mentioned about Colt and there warranty
@SuperGiantGeckosLLC4 ай бұрын
👍BCM bcg Auto👍
@anthonygerber82614 ай бұрын
BCM should be good to go.
@slaytonchambers54764 ай бұрын
It was a complete colt to begin with.
@THEPAGUNGUY4 ай бұрын
It was and I’m definitely sad to see this happen like this but I needed a working rifle. I still have another complete colt and I wish Colt would have fixed it for me but there’s nothing I can do about that.
@slaytonchambers54764 ай бұрын
@@THEPAGUNGUY BCM is the new colt and the fact they support the people not this tyrannical government is a plus. Colt sold their soul to government contracts, they can kick rocks if all I care.
@travisprice57084 ай бұрын
I buy psa bolt carriers just because I don't pay an extra $150 for a logo.
@SchooloftheAmericanRifle4 ай бұрын
You are paying for Q.C. with BCM. PSA does no where near the Q.C.
@travisprice57083 ай бұрын
@@SchooloftheAmericanRifle if that's what you have to tell yourself so that you're comfortable paying the extra money, I won't judge you. I almost baught a bcm bolt carrier too just because I liked how the logo looked.
@tonyc2234 ай бұрын
Clean your chamber and bore.
@THEPAGUNGUY4 ай бұрын
I do I have a chamber brush I got from Fulton armory I use.
@SchooloftheAmericanRifle4 ай бұрын
2k rounds is nothing. Cleaning is not necessary in this case.
@shanewhitted14 ай бұрын
Y
@gleamtarrest63104 ай бұрын
Coulda just lubed the gun & saved yourself some money.😂
@THEPAGUNGUY4 ай бұрын
Well we like it dry so 🤷♂️😂
@mariotorano37814 ай бұрын
You no longer have a Colt socom rifle . Doesn’t make sense man Colt is a standard in the gun world. Just buy a Colt bolt bro
@THEPAGUNGUY4 ай бұрын
I tried it failed
@rifleshooterchannel2084 ай бұрын
His stock BCG was most definitely unsat. I wouldn’t use BCM but if it works for him, it works and at the end of the day reliability is a priority.
@BaconSlayer694 ай бұрын
Colt is just a name now they’re quality went to shit BCM is superior to colt
@BaconSlayer694 ай бұрын
@@rifleshooterchannel208bcm is superior to a colt
@rifleshooterchannel2084 ай бұрын
@@BaconSlayer69 It’s funny because the new great criticism about Colt is that they “outsource parts” which is something they’ve always done. Ironically it’s something BCM does too and, unlike Colt, BCM doesn’t have the capability to make any major parts in house. BCM is a glorified parts assembler and they make C Tier rifles at best.