.22 LR AR-15 Complete Upper (AR-22): In Depth

[@Bear_Creek_Arsenal]

Please note: magazines are no longer shipped with a complete rifle or upper purchase, but are available for sale at BearCreekArsenal .com

[@Alejandr-io3oe]

Can this AR be converted to a 5.56? The Lower Receiver is Milspec right?

[@smokeybear1925]

@@Alejandr-io3oeyes and yes.

[@Mach1780]

How much does it weight?

[@C-Note_The_Gunner]

Ok so my extractor came out of mine yesterday, had it a lot over 2 years, and I messaged bca and they said return it and I don’t want to return my whole damn gun for a silly lil part. So what is a good aftermarket extractor for the bca 22. I’ve been trying to just look at what would fit best and that seems to be the Ruger 10/22 extractors

[@micthewrencher]

That would have been good to know before i ordered 2. The website said it came with a mag, but none came in the box.

[@silvergrizzly316]

Lamar, just wanted to take this time to thank you and everyone at BCA for putting out quality products and for keeping well below competitive prices. Again, thank you and God Bless brother!!! ~Jay~.

[@Bear_Creek_Arsenal]

Appreciate the support! It's our pleasure

[@garyrobertson5629]

@@Bear_Creek_Arsenal BUT WHY DO YOU REFUSE TO REPLACE A BROKEN SCREW?

[@Bear_Creek_Arsenal]

KZbin doesn't allow us to link to products. So to find the AR-22 Upper on the site, go to Calibers ➡AR-22 (.22 LR) or search 274-

[@kylestokes6235]

Waiting on 7.5 and 5 inch 22lr uppers.

[@onemarktwoyou]

@@kylestokes6235 Read the reviews before you buy.

[@racerunnermx]

so I ordered your .22 and had issues with light striks from the firing pin this would cause the extractor not to work properly had couple rounds explode in the BCG after looking at the Firing Pin I took it out and welded the tip 1/16 of inch after filing to fit the BCG hole it works Flawlessly I would recommend making the Firing pin longer this would help overall 👍

[@user-OG-g]

I love how transparent you guys are about the product and what to expect when you receive it. Keep up the good work .

[@randallkelley3599]

Bought one last week. It worked perfectly, put 50 rds with no lube. Then another 50rds after I poured some oil on the bolt. We shoot every Friday, so will do it again this week, so far it is super good.....

[@markasteelsr.5990]

The cost of the 22 long rifle besides the 22 is one of my favorite rounds.

[@michaele.7115]

I just got mine combined with my PSA lower. Love it! I cant say enough about this upper! It is my now go to squirrel/rabbit gun. Very accurate with my Bushnell Rimfire scope. Very accurate to 100yards. More than enough for 22 lr

[@mr.honest8040]

Hey Michael, Do you know if the bca 22lr bolt profile is M16 or FA?

[@johnfowler6189]

Received my AR 22LR upper from Bear Creek middle of this week just in time for a weekend work out at the range. The upper arrived well packaged, no damage and was very pleased at how well it was put together. I thought a 10 round magazine was to be included but not so. No big deal. I mated the upper with a PSA lower built with a CMMG lower parts kit, including CMMG trigger/hammer. This lower has performed flawlessly with my 556 upper. The day at the range was mostly successful. I had 4 CMMG 25RD mags stuffed with Winchester 40gr super-x to start the check out. Out of the 100rds I had 4 FTE, 3 FTF, 2 light strikes and one DOOB. I really attribute most of those failures to the ammo. The reason being is I have similar issues with the Winchester ammo in my 10/22s and Marlin 60. I reloaded the empty mags with Aguilla 40gr HV and one FTE and one light strike. Think upper needs to be broken more but overall 👍 Was really impressed with the accuracy of the barrel. At 50yards using a Romeo 5 red dot was consistently shooting 5-6 round groups that could be covered with a quarter. Much more accurate than the CMMG conversion and right on par with my Marlin 60. The bolt design appears adequate for the job but the only two improvements I would recommend would to use a dual guide rail and encapsulated spring for the bolt as in the cmmg bolt. The single spring and guide rod produces a torquing action that could bind the bolt. Also of course is the chisel tip firing pin. Considering the price point, I'm very happy my purchase. The BCA barrel exceeded my expectations for sure.

[@doom2125]

Yo just a heads up the included mag was missing from my shipment as well. If you get in contact with them they will make it right and ship one out to you.

[@markchapman9464]

Picked one of these up, So much fun to plink with. I had a couple miss feeds but nothing more than my 10/22. Great work!

[@aaronjanderson1942]

Using the CMMG Gen2 mags on a BCA .22lr upper they tend to push up on the ejector causing the bolt to jam. Not sure if this happens with other manufactures. Simple solution is to file down part of the feed lip on the left side. Only takes about +/- 1/16 of an inch.

[@jmac3693]

I love all my bear creek arsenal stuff I have. I've never had any problems with any of it. I highly recommend them. I have three barrels and a few other little parts.

[@fanbatcher]

The one exception would be if you got the .410 upper. It’s very temperamental.

[@racerunnermx]

so I ordered your .22 and had issues with light striks from the firing pin this would cause the extractor not to work properly had couple rounds explode in the BCG after looking at the Firing Pin I took it out and welded the tip 1/16 of inch after filing to fit the BCG hole it works Flawlessly I would recommend making the Firing pin longer this would help overall 👍

[@charlesblake7802]

I love bear creek arsenal products so much quality for the price this company is going places they will end up with one of the best reputations in the business if they keep going the way they are

[@929cbr_rr]

I just purchased one of these in the 10.5" length, last week. Have fired about 500 rounds through it. It works very well indeed. I have tried 6 different brands/loads of ammo, the only one it did not like was Remington golden bucket 'o bullets. Everything else works correctly. Good accuracy, very easy to get one inch groups at 25 yards. Edit: I am running it on a Anderson lower.

[@djjaysky9071]

does any 22lr like Remington golden bucket 'o bullets?

[@eloygalvan1123]

Can’t wait to see these in a shorty configuration. Will be the first to snag one!!

[@guitarguy7428]

Love my Bear Creek 22lr upper. 1 failure to eject and 2 failures to charge the hammer in 200 rounds with 3 different brands of ammo. I'll take that any day!

[@backcountry164]

Is there a way to dead blow the blot?? The slow-mo really shows that bit of bounce as it closes.

[@Tonyplat98]

Great lol I was thinking about what special buffer do I need for the mini .22 lr but this vid explained it perfectly for me. I have a small ar15 pistol that I built about a year ago and the thing is useless honestly so I kept trying to think what to do with that lower well now I know exactly what I'll use it for. The mighty .22 lr and let's go plinking... Thanks BCA for making it so easy and so affordable for us. I know I'm kind of late to the game but it's never too late to get into this hobby.

[@justsnuggle]

I love how the magazine compatibility topic... Which was the only reason I searched this video... Was a freaking afterthought and put in at the last second.

[@C-Note_The_Gunner]

I wish this topic was bridged over to extractors lol, I can’t seem to find an extractor specifically for the bca22… the ruger 10/22 seems pretty comparable

[@Tuffdaddy1958]

Thanks bear creek arsenal!

[@JM-es9rw]

This is cool... waiting on a 10 inch. I just ordered a 7.62x39 ar and I can't wait to shoot it. Just got my red dot yesterday. You guys make great products and I paid half what I would have at one of the box stores. Thank you for being you. Keep up the great work. Will be ordering a 300 blackout here today or tomorrow.

[@Bear_Creek_Arsenal]

Great to hear; enjoy your upper!

[@mr.diyhowtopaintingwelding4479]

I bought a 10.5 22 its loud as hell

[@n6mz]

Long live BCA. I'm doing my part to make sure it happens.

[@grady719]

I would love to see this in a smaller barrel size!!

[@Bear_Creek_Arsenal]

We're planning on offering pistol configurations eventually

[@grady719]

@@Bear_Creek_Arsenal as soon as that happens I'm buying one!!

[@ELIRAXPRT]

@@Bear_Creek_Arsenal I saw you had a 10” pistol, I’d love to see something even smaller maybe around 7” 22lr

[@jasonhook5644]

How about a 20" H-bar?

[@elwhastrummer]

When is the .17HMR coming out? That would be super cool...little miniature versions of 5.56 cartridges...Get on it BCA!!!

[@chrissewell1608]

Agreed.

[@PropsnPews]

Hurry up and get the shorter uppers in! I will snag the first one!

[@jakeseegrist5866]

Absolutely love mine! It works like a dream, built tough, shoots well, consistent, exactly the same feel as my others, just cheap as hell to shoot. Took mine out rabbit hunting the other day, it was blast. Pretty awesome and simple engineered solution for training and sporting.

[@eddiefrayle]

Does bolt stop on mag?

[@johnmarsh481]

Looking at disassembly and listening to your explanation of how it all functions, will you please consider building a 22 WMR? Would be an excellent addition to your business. Keep up the great work, still love shooting my 350L every time i get it out of the safe.

[@eysman73]

I would love a WMR AR-15 too...that would be awesome!

[@silvergrizzly316]

Excellent idea, John!!! 👍👍

[@madpuppeer17]

I'd buy two. lol

[@sticksnstonespatriot1728]

Yes💯

[@c.j.rogers2422]

I've got to think there's a reason there have been so few successful semi-auto 22wmr designs. If Ruger can't make it work, that says something. It's especially difficult to make them work with diverse loads on the market. That said, I'd probably want one, too, being a maggie junkie. If it happens, build it with the proper barrel dimensions so it's accurate. For those who don't know, 22 LR & 22WMR use different caliber bullets. Contrary to the popular myth, 22WMR can be quite accurate, with proper barrel dimensions. If you don't believe that, check out the Ruger American Rimfire in 22WMR. Mine shoots sub-nickle sized 50yd groups with ease.

[@Warthog71]

Very interesting bolt config. I can def see BCA eventually building off this design to create a buffer-less AR9 upper. Def would need a heavier spring and rod. Or a pair.

[@rmblwgn]

Very good idea. A pair of rods would be absolutely necessary to keep it rigid

[@urbankyng6467]

Something similar to the mpx.

[@robertribitharrison666]

They have the 9mm bufferless upper now, just like this 22lr. Good stuff 👍

[@KarlDergrosse-yd6nd]

I just purchased one. The magazine I purchased through BCA has an issue. Either the magazine release is in the wrong location, or the feed section that is suppose to match up to the breech was made incorrectly by "BLACK DOG MACHINE, LLC". I never had an issue with any BCA products. I purchased many uppers and killed many Deer. I just submitted pictures to BCA this evening. Waiting for a response.

[@markasteelsr.5990]

I GOT ONE! Just need to get out to test/wring it out with at least 500 rounds.

[@gmac1451]

3-22-22 , BCA hit it out of the park on this one. well done runs like a sewing machine . ran several different brans ammo no issues and accurate also. thanks BCA

[@rezzgoatrising1829]

My extractor, spring, all came apart after 3 magazine on my BCA 22 upper. Shooting Walmart federal 40g ammo.

[@XLpacman805]

Exactly what I was looking for to start hunting. Thanks!

[@amadrigalme]

Just got mine and it’s the craptastic jam-o-matic, is there a secret to making it work? I’ve only put 350 rounds through it…

[@country4life534]

Please make more rear charging 22lr uppers! I like them and ya'll are out of stock. I really hope you don't stop making them!

[@buckfiden6326]

Waiting on 10.5" Left Charging Right Ejection

[@That_Guy5575]

Man that’d be perfect

[@chrissewell1608]

Thats my choice too!

[@adlucem9845]

If I buy a t-shirt can I get a free upper?

[@vonster22]

No but you can get a free T-shirt when you buy an upper on special

[@grantdeisig1360]

I'm sure if you buy a $300 T-shirt, they could work something out.

[@jeffbendertheenforcer5834]

Great video guys ... You guys make great products. Thank you !!!

[@chrissewell1608]

Yes, but that was yesterday's special.

[@bernieviramontes682]

Lol if I buy ear plugs can I get an upper lol

[@Paulio91184]

Can I use my CMMG conversion magazines with this upper?

[@3gunshooter60]

Thanks for the take down instructions. Looks pretty simple. I'm going to get plenty of use out of mine when it comes in. Might be interested in the 22 magnum version too. I'll let you know what I think of it soon.

[@AndyAlaska375]

Gonna need one of these. 👍 Currently on sale at BCA for $299.

[@thegoot216]

So got mine today took it to the range It worked great with the magazine that you included looks like a Gen 1 CMMG? But did you guys realize that the Gen 2 CMMG MAGAZINES DO NOT WORK WITH YOUR UPPER! The follower walls on the Gen 2 are taller and prevents the bolt from even engaging the chamber. Do you guys have a fix for this? or did you even know about this?

[@fishinnshootin689]

Love mine but the guide rod for bolt keeps bending and holding the bolt open. Quick fix but might break after bending so many times.. also bolt doesnt like to lock back, doesnt run well with other/bigger mags. Love the side charging and not having a buffer in my gun to lighten it up. Just bought a left side charging 5.56 from yall, you should make a left side charging ar22 for us right handed right eye shooters. Also if you made a 5.45 upper id buy it, specially if it was side charging! 😉 Thank you for the cheap uppers

[@jedd4635]

Mad at myself for not doing research. Got a hammerli 22lr which has been just fine, no complaints. Just think the BCA upper seems so much more crisp

[@itsjustjoe3790]

Would this work with a binary trigger or forced reset trigger?

[@norinco3264]

I will be testing this soon. I'll try a franklin bfs 3, echo 2, and FRT.

[@madpuppeer17]

You should release a lower tension spring to put into the guide rod of the BCG so the .22LR will run subsonic ammo semi-auto in the side charger. Im not an engineer, but it seems that could be a fix to the lighter blowback from subs.

[@madpuppeer17]

could be a cheap gimmick for you guys to produce if there isnt to much work to design it. I feel like it would sell well, I know I would buy at least two.

[@c.j.rogers2422]

It seems like one could experiment with a stock spring, cutting off a coil at a time til it works. Or just trying different springs.

[@madpuppeer17]

@@c.j.rogers2422 One of these days when I have enough time farting around to measure the spring size for matching lower tension springs, and to buy a spare in case I mess the original up. BCA doesnt sell spare springs for the .22 upper yet. (or at least its not listed on their website) They will only replace them if there is a manufacturer defect. These days my range trips are kept short, and I want to be able to plug and play. Im sure alot of other people feel the same. But you are certainly correct that it could be done on your own.

[@thomasd2695]

I took a fox down head shot at maybe 20 yards with a 22lr.

[@psnkeemoe1]

WE WANT A .22 MAGNUM UPPER + MAGS PLEASE PLEASE

[@wyatthunter5876]

Love your guns only thing I didn’t like about my 300blk upper was the hand guard was too long I can not attach a suppressor on end with the hand rail come out to far towards tip. Other than that love it! Keep up good work Bear Creek!!! ❤️🇺🇸❤️👊🏼

[@chrisdarby2233]

So when yall gonna make a 30-06 lower and compatible uppers?.....

[@wizard_of_poz4413]

Those things are pretty out there

[@F1lmtwit]

Q) is this blowback I ask because I want to use it in 17 Design Stripped AR-15 17DM-180 Billet Lower Receiver

[@craiger8484]

Will you expand this platform to any other 22 calibers 22mag, 22TCM??

[@brandenapexo604]

Binary trigger with a 50 round drum will make this thing a joy on the range

[@jasonarringotn2501]

Are you only making side charging uppers now?

[@mattmccallum2879]

Does it work with a binary trigger?

[@danieldamazo2422]

Thanks looking for a 22lr upper.

[@ghosttrail8939]

Any plans to do shorter barrel lengths?

[@Bear_Creek_Arsenal]

Yes we do plan to offer pistol configurations eventually

[@That_Guy5575]

@@Bear_Creek_Arsenal Outstanding!

[@bansheebird]

@@Bear_Creek_Arsenal I'll be anxiously waiting for the pistol upper. Please hurry before my wife finds out I've bought 4 pistol uppers from you in the last month.

[@johnnyalvarez7788]

Can y’all do a more in depth video of the .17 hmr upper both in a 16” and the 7” I can’t find any other videos anywhere on them?

[@adamadams6740]

Should do a .22 magnum upper??!! I’ll take two..!!

[@Bear_Creek_Arsenal]

In the works

[@adamadams6740]

@@Bear_Creek_Arsenal awesome 👍🏿

[@corruptedo1]

I've been looking for a good dedicated 22lr upper for a couple of months now. I placed an order the other day at another reputable company for their upper then this video came up in my recommended list due to me searching up 22lr videos. I then QUICKLY cancelled my order and jumped on the BCA website to buy this upper. I'm so pumped to have a BCA sidecharging 22lr to add to my collection!

[@sticksnstonespatriot1728]

Did you get it yet? If so, how do you like it, sir? I want one. I have a KP15 mono lower that i still need an upper for...was thinking about this.

[@corruptedo1]

@@sticksnstonespatriot1728 I really like it. It feels solid and has a perfect weight to it thanks to the thick receiver and heavy barrel. It shoots great with almost no recoil. CMMG mags work perfectly with it. I definitely would recommend.

[@sticksnstonespatriot1728]

@@corruptedo1 Thank you, sir👍🏼

[@seancssu]

Seems like a great first rifle choice. Later down the line once your budget opens up get other calibers

[@tonyemory3618]

been looking at getting one of these, Money is a bit tight at the moment so will have to wait, Hopefully yall will have some in stock when i am able to get a couple of them. I know yall run out of stock pretty quick. Question: I would like to know if yall have any thoughts on building a 10mm upper for sale?

[@hakeem7510]

I have 2 Marlins 795 and XT 22 VR very accurate!

[@daviddrago7107]

Black dog 50rnd drum works with it, love mine, have kns on rear of receiver with MI lightweight folding stock since don’t need buffer and fold and fire capable

[@1911GreaterThanALL]

why does bear creek no longer offer full length top rail on the handguard?

[@boken3408]

Buyin one and goin bear huntin. Thanks guys!

[@smokingcrab2290]

Will this work with an FRT or binary trigger?

[@marksanney2088]

Appreciate your videos. I do wonder if the bcg on this particular 22L upper will trip an auto sear on a mil spec lower. Again, thank you very much for your videos. Looking forward to snagging a BCA upper in the very near future.

[@bgray0067]

It will not trip the sear, just tried it. Hopefully Bear Creek Arsenal will design a new bolt that is capable!!

[@stefanl5183]

@@bgray0067 Well, that sucks because it also means it won't work with the Fostec binary triggers. My understanding is they need a BCG with the auto profile. The Franklin Binary triggers might work, but those have the problem of outrunning the bolt carrier. The Fostec eliminates that issue by somehow engaging the auto profile on the BCG.

[@ped200014]

I love bear creek arsenal 😘💕

[@project3003]

I bought a m+p 15-22 mag and it's having an awful time feeding the ammo, any thoughts?

[@jockobacumbo623]

Hi Lamar, could you please make a classic 22lr AR15 in 16” and 20” with the A2/3/4 carry handle and F marked front sight post and the plastic hand guards with rear charging handle or side charging handle, rear charging preferably.

[@Bear_Creek_Arsenal]

Thank you for the question and idea, currently we do not have this on our radar for production, but we are regularly asked, by management, what kind of rifles our customers are looking for. We will place this within our pool of suggested ideas and as the need and want grows, so will the incentive to manufacture.

[@charlesdavis3923]

May have just decided what to get for my next upper

[@nebaker4]

When is the 6 7/8 or 7.5 inch upper coming back

[@KD-lb9bg]

Good video, very informative, thanks much.

[@scottcombs6993]

@BCA. Have you ever put a .22LR or a .22WMR together with a 6 7/8” barrel and NO buffer or stock? More of a traditional looking pistol but on an AR15 platform? I think that would be a fun plinker!

[@Bear_Creek_Arsenal]

Great idea Scott! We have yet to video that

[@stephenszabo2361]

Do all your uppers have issues with light hammer strikes.

[@colinmiller4598]

I love Bear Creek Arsenal!

[@mr.honest8040]

Does anyone know if this 22lr bolt is M16 or FA profile? And if not will the bore buddy sear trip work with this BCA bolt? Thanks in advance for Abby help

[@stevenmitchell6347]

The underpowered subsonic ammo is understandable to cause issues but do the full power, 60gr Aguila subsonic rounds have the same issue?

[@FlowBaka]

Are you guys planning on making a shorter upper?

[@chrissewell1608]

Armadillo gun! With a .410 mounted below the rail.

[@johnschmidt501]

Awesome upper, and its made in the 2nd best Carolina!

[@benfrank1583]

4.5in please. If I could use my cmmg mags too would be awesome

[@colbollinger1110]

@Ben Frank 15 It uses cmmg pattern conversion mags; rock on Man! 🤘 You know you need a rifle length for long range work. Haha Best Regards and God Bless, Col

[@benfrank1583]

@@colbollinger1110 got that handled with the 10/22. I think this in a 80 percent lower would be awesome backup "truck gun". I think with a frt-15 we in the works for modern "reliable" tec22

[@hopewilliams6705]

Is your bolt compatible with binary triggers?

[@revgregory]

As the operation of a binary trigger doesn't rely on any interaction with the bolt other than the hammer reset to achieve it's function it should work, I'd be curious as to whether it will work with the full auto trip in a registered full auto lower though.

[@madpuppeer17]

​@@revgregory I dont know about these uppers working on full auto trip, as I have no experience with this upper on full auto. That being said: CMMG conversion kits that work on blowback will work with full auto, so I dont see why these wouldnt as well.

[@dangerstohlman]

Sadly I wanted mine to work so badly but I’ve had to send it back twice now because of light strikes, firing out of battery, and stove piping almost every round.

[@jyy-chyichang9249]

Anyway that we can only buy the BCG?

[@shawnroblee5436]

I just built a ar15 lower with a rare breed frt 15 .will this bcg run with my trigger? …the trigger calls for a full auto bcg cutouts…if it doesn’t will you guys be willing to make parts to make it compatible to compete with competitors, like cmmg?

[@headbanginhyde9711]

Mine won't allow me to seat up and put in my rear takedown pin. The threaded receiver plug is in the way. Yes..flat side is down.

[@Paradise_Arms]

Any plans for a 22mag? That would be badass. I'd be a buyer.

[@Bear_Creek_Arsenal]

Great to hear John!

[@ped200014]

I agree. 22 mag is actually useful.

[@jakeseegrist5866]

I would love a 22 mag setup

[@sammystull4985]

@@Bear_Creek_Arsenal build one that takes the Kel tec PMR 30rd mags. Just a thought.

[@c.j.rogers2422]

@@sammystull4985 IDK if it's practical, but that's a damn good idea!

[@blacksmithcowboy4725]

Just got a 22 lr upper, took it out shooting today. Accuracy out to 100 yards was decent. Only problem that I encountered is that it would not run a whole magazine without having a failure to eject spent cases prior to picking up new cases causing a failure. Shot several hundred rounds, and it happened every time I ran another magazine of ammo. Any thoughts, fixes?

[@Bear_Creek_Arsenal]

Sorry to hear that; send an email to [e-mail] with details such as the type of ammo you were using and they will assist you

[@blacksmithcowboy4725]

I have had the same problems. I was told to lube it up heavy and run a few hundred more rounds thru it, to "break" it in. so far it's still having a few failures, but not as many as when I first got it.

[@jaico5538]

When are you guys going be able to ship to California? Please get the 10 round mags soon or start selling with an option with no mag!

[@Sloan.c]

This comes with the 10rd mag

[@jaico5538]

@@Sloan.c that's not what they replied in my email on Monday... They said it comes with a 25 rd mag and do not ship to state with nag capacity restrictions

[@Sloan.c]

@@jaico5538 thats weird, in the video they say they ship with 25 rd mags but their webpage says it comes with a 10

[@Bear_Creek_Arsenal]

Hey Jaime we recently changed to shipping them with 10 round magazines. You're good to go!

[@chadliggett7988]

Bear Creek Arsenal Brother Are you guys making this in left side eject? What is the twist 1:16? Can I get this with a stainless steel barrel? Best Regards!

[@layedoutproductions2962]

Will offer a Pistol length .22LR at some point??

[@Bear_Creek_Arsenal]

Yes eventually

[@josephjeveryman]

Is the bolt compatible with a 556 side charging upper?

[@C7CORVETTEz51]

What is the benefit of this vrs cmmg conversion?

[@billjensen6216]

I got the 22 conversion kit. However, I was wondering if you have the 22 barrels and the other parts of the conversion kit. I do know that CMMG makes them, but I prefer BCA.

[@Bear_Creek_Arsenal]

Currently we only sell .22 LR complete uppers. These can attach to any mil-spec AR-15 lower though

[@robinsontanner1234]

I need one of these but 11 inches ish. Is that something I can get?

[@C-Note_The_Gunner]

Where can I get a replacement extractor, lost mine yesterday

[@Bear_Creek_Arsenal]

Sorry to hear that. Please reach out to [e-mail] and they can assist you

[@C-Note_The_Gunner]

@@Bear_Creek_Arsenal thanks. I ended up having to buy a tiger 10/22 plugger spring and extractor… it was overpowered, would barely open, so I had to cut down the spring, it works a little bit, not much though, I’m going to make a video later. Super disappointed after only getting about 500 rounds threw this upper b4 something very influential to the gun just flies off. I’m hoping you guys can just send out the 3 parts cause this is starting to really suck.

[@nicholasconley8527]

So I wouldn't need a buffer/spring at all right?

[@Bear_Creek_Arsenal]

Correct

[@timmullins9800]

just like the 10/22 good stuff

[@sailboat7520]

high dollar stuff here. some say the bcg doesnt fit some barrels. need to sell bcg with barrel matched set.

[@loko7711]

Question ❓ I have a side charging 5.56 upper and I wanted to know will you BCA offer the 22lr bolt as conversion kit?

[@Bear_Creek_Arsenal]

Currently there is no plan for that