Great Build Quality - Logitech G703 Teardown

[@Beardedbob]

Check out this amazing mouse I've made for Latenci's 49g Featherlight Logitech G Pro X Superlight @ kzbin.info/www/bejne/iaOUpaObn612nbM

[@raphaelmathonet7717]

For you which are The best mouse feet, all mice confused. (I love your videos).😉

[@raphaelmathonet7717]

Very cool the 49g g pro x Superligth but I prefer the wireless Finalmouse ultraligth 2.😆

[@Beardedbob]

depends on the mouse.. but for the GPWSL its the Tiger ICE atm imo kzbin.info/www/bejne/hJeqh2mHjaitgbM

[@tmifb9926]

Best side buttons on a mouse ever. Love my G403 going strong since 2018

[@Beardedbob]

You can't miss them on this thats for sure :-)

[@MiguelRoig99]

ty very much for the tutorial,I was able to clear the right click

[@HazyTWxGGZ]

can you do a weight reduction video for this?

[@potatoskins8155]

They need to do a lightweight version of this asap I have the g pro aswell but the side buttons are such crap compared to the 703's

[@kartel1]

Can you make a KZbin tutorial how to make it lighter? Ik you streamed it, the problem is that the stream is no gone due to twitch clips disappearing in 2 weeks after ulpload

[@TelevisionNinja]

"Stroke me daddy" lol

[@Beardedbob]

Cats love a good stroke

[@Mazzeha]

Hey, I've got this mouse and it just will not charge the battery, I've changed the battery with 2 different ones. It'll work connected to the cable but always reports the battery is at 2%. If I unplug the charging cable it'll say on for maybe 30 seconds then cut off, any idea what it could be ?

[@jcthe7866]

Hi great job on the video! I just wanna ask u if I could use the g502 scroller on the g703 as I need to replace my g703 encoder scroller thing.

[@jaykkng]

Just desolder the old scroll wheel encoder and solder in a new one The g502 scroll wheel isnt that worth it as its quite heavy and u would have some trouble tryna put it in

[@matejdrahos6849]

my jst broke so now the top of my mouse isnt working. the plastic just came off, im always super carefull with my electronics, so i dont know what happened

[@MikeJones-wp2mw]

I took mine apart because the left click was getting a bit twitchy and double clicking when I would try to drag and drop things. Put it back together very carefully and now all my buttons don't click at all. Took it apart and put it back together a few more times and now it sometimes clicks now. I think I damaged the ribbon cable, possibly pinched it putting it back together the first time. I don't know what to search for as a replacement part. I'd replace the switches if I could get the parts and knew that was the problem. Put some new skid pads on it too if they are available. Is there a parts supply website?

[@weetabixharry]

I'm here trying to fix exactly the same problem. I've only had the mouse for 1 year, so maybe there's a bit of a design problem. It's the first "expensive" mouse I've ever owned, so it's really disappointing that it's failed so quickly. The cheap garbage mouse I used previously probably lasted for a decade without any problems.

[@weetabixharry]

I broke the little plastic retention bracket on that ribbon cable, so I had to reseat it 5 or 6 times to get it to grip, but it did in the end. I'm still going to have to bin the mouse, as the left-click is still playing up. It's really annoying because if I push hard, then it works okay.

[@ryanlee9150]

@@weetabixharry have u tried RMA and warranty sttuff? logitech apparently quite competent with replacements

[@weetabixharry]

@@ryanlee9150 Unfortunately, I live in Switzerland, where customer service doesn't exist. Otherwise I would definitely have given it a shot.

[@mjkl614]

my coworker dropped the mouse and all of a sudden it's no longer working (seems no longer powers up), he then gave it to me as a nice paper weight, which component you think I shall replace?

[@devisals]

Check if any of the wires got disconnected (i.e the battery)

[@okseresko]

Is there a space to replace battery for a bigger one? Or to add one more in parallel? I've seen on Aliexpress there are 2200mA/h batteries compatible with G703. Wow, it's only 250 mAh, so small battery. What if replace it with 2000mAh?))

[@Beardedbob]

Depends on the battery size. you might now get a bigger capacity for the same footprint.

[@okseresko]

@@Beardedbob thanks for using measuring pad :D Just trying to measure the battery holder size to find the same size battery)

[@okseresko]

@@Beardedbob the holder is about 3.5x5.5 cm. The most batteries have 35x50mm, so that's great. Just need to find right hight (2000mAh 10mm, 1500mAh 8mm, 1200mAh 6mm, etc.)

[@PanPrezeso]

@@okseresko did you find one that will fit?

[@okseresko]

@@PanPrezeso didn't even receive my mouse yet :[

[@EnormeEkoH]

Hi can u make a video on a wireless xtrfy m4? Its 3 month in waiting for someone but i just see printed m4..

[@Beardedbob]

haven't seen any bases or mods for this, if you have some send them over and I'll take a look.

[@ertyu8574]

slightly unrelated, but how much do you think a g305 modded madcatz mojo m1 would weigh? I'm sure there are plenty people who would be interested in a lightweight wireless g502.

[@Beardedbob]

probably a little more as the G305 pcb and battery would add to the stock Mojo Weight.

[@ertyu8574]

@@Beardedbob probably still beat the stock g502 light speed by quite a bit. even 80 grams would be quite a large improvement .

[@horchatakevin]

Can you do a viper 8k weight reduction pls?

[@Beardedbob]

Here's the normal viper this will be the same kzbin.info/www/bejne/gHmtqmt-Z61kn5I

[@Wootguy238]

I was hoping I didn't need to take the skates off to get inside it. I just want to clean it up since my clicks are sticking and my scroll wheel basically doesn't work anymore.

[@Beardedbob]

Rare you can open a mouse without having to. The RVM is the only one that you can that I've come across. :-( check out these methods to remove them though it might help. kzbin.info/www/bejne/e6uXnZtjrapqkLs

[@thebestever0174]

so i kinda threw mine and my scroll wheel is out of place how would i fix that

[@jackhazell8084]

I have the same problem (except I dropped mine) did you ever find a solution?

[@ben1172]

does anyone know what the switch height is for the scroll wheel click? My g703 is getting the double click issue and i decided to just replace all the switches at one go

[@bman2827]

Interestingly my G703 has the white dot switches on the left and right mouse buttons, unlike yours with the blue dot switches.

[@Beardedbob]

Strange but I've seen the same just not sure which is the later version.

[@oandgw]

@@Beardedbob that's probably becuase your new version has the Omron 20Ms to avoid double clicking. 20Ms have the white dots while 50s have the blue.

[@pauldo5846]

the shaft on the scroll wheel is horrible and the weakest link for this mouse, mine broke after 1 year. The scroll wheel would just free spinning when it happened and your best choice would be to replace it. I found a metal scroll wheel replacement on ebay and it has been working well since then. The OEM plastic one sucks

[@n41rod31]

mine just broke today after 6months

[@n41rod31]

could you tell me the scroll reference you chose pls

[@Bollalillo]

the g403 buttons on both the sides and top was the best logitech has ever made, shame its so big and heavy

[@Beardedbob]

yeah a lighter version would be nice.eeeeeeeeeeeeeee

[@84m30]

This is a fantastic mouse

[@Beardedbob]

its ok :-p

[@Sword_Master149]

i ended up breaking the pcb cable lmao

[@mojoga1]

i had g603 and the scroll wheel stopped working after 3 month of light use. so i bought the g703 and guess what.... the scroll wheel stopped working again after 2 month of use. i'll never buy again logitech products

[@Beardedbob]

Yikes.... was it the press or the scroll that failed?

[@mojoga1]

@@Beardedbob the scroll wheel. its a very common issue with the g603 g607 and g403

[@brunoi.t.kuroiwa7481]

My G703 scroll just stopped working today... it's "loose", keeps spinning for a long time, but the sensor doesn't register the spin :( the scroll click still works tho

[@Cam_Wight]

same thing, plus I get the double click... so disappointing

[@johngreydanus2033]

@@brunoi.t.kuroiwa7481 Plenty of how to repair videos here on YT

[@quin2572]

i have no screws on the bottom of my mouse

[@johnzheng1424]

Any mods for the g703 hero?

[@Beardedbob]

I've done a weight reduction.. video just needs editing. Here are some pictures though. beardedbob.com/?s=g703

[@athmaid]

@@Beardedbob is there any chance you will get around to finishing it?

[@shemumble4127]

There is no screws on my bottom feet of the mouse

[@Beardedbob]

Is there a hole?

[@Rhezzuh]

will the pcb fit into a razer deathadder

[@Beardedbob]

if it did it would need a custom base making for the mounting points.

[@sk-yq3jm]

Hi, I'm from Ukraine, Can i reduce her weight?

[@Beardedbob]

You can, just get cutting :-)

[@johngreydanus2033]

It's not that great, do a search for how to repair scroll wheel problem, so many videos here on YT

[@night7185]

this mouse sucks, i slammed it on my mouse pad once and the scroll wheel was completely messed up. My g403 took hundreds of these slams and never had any issues. garbage.

[@Beardedbob]

You should let Logitech know it failed the rage slam test

[@night7185]

@@Beardedbob only on the g703, one slam on the desk and its dead. hundreds with the g403, still working like the day i bought it haha.

[@ryanlee9150]

@@night7185 sounds like a defect problem dude, but why the hell are you slamming a $80 mouse in the first place!?

[@night7185]

@@ryanlee9150 rainbow six siege ranked is hell you wouldnt understand

[@toxic1428]

a

[@matejdrahos6849]

a