Bearing Block | Closure | Outboard bearing for coil holder | CNC Machining

[@CuttingEdgeEngineering]

Hey mate glad the calipers made it to you and have come in handy 🍌😂 thanks for having fun with it and keep up the great videos & work 😎👍

[@ChrisMaj]

I'm sure I'll get a lot of use out of it. Thanks again for the entire package.

[@paulmace7910]

Curtis would be proud that use are using only the best tools. Fine work. Thanks.

[@jimsvideos7201]

When the drawings you get are that hard to read, a banana caliper seems like exactly the right measuring instrument.

[@ICA17887]

Hi Chris for this great lathe machining video. I love the Kurtis CEE "banana" caliper, I'm a fan of this channel like yours, have a good weekend Chris and look forward to discovering your next videos.

[@ICA17887]

Thanks Chris.

[@JeffBlack1968]

I see you upgraded to the Kurtis 🍌 measuring system. 👍

[@chatnik78]

Wenn ich deine und CEE Videos am Wochenende anschaue, ist das wie Yoga für mich 😉👍

[@MattysWorkshop]

Gday Chris, nothing like have the right tools to get the job done😉, beautiful work as always mate, cheers

[@markanthonysmith413]

Great job Chris, I see the banana standard is getting around now.👍

[@CraigLYoung]

Lol, so you got one of CEE's Banana Scales. Now that's funny 😅 Thanks for sharing 👍

[@jackfitzgerald6927]

I do love watching you and CCE

[@Lathe.Lab-vc3td]

Very accurate and excellent, dear colleague 👏👏👍👍

[@raindeergames6104]

Curtis only uses the best. Glad to see everybody adopting this exceptional measurement standards.😂😂

[@johnlawler1626]

Great bit of turning, and measuring thanks for sharing 👍

[@shug831]

Nice to see finished parts fitting together. Bit scary with that screw cutting tool, not a lot of clearance once it finishes a pass.

[@ShainAndrews]

5:36... No you didn't... 5:48 Are you serious? It has a certified calibration? I don't remember them mentioning that. I'm need to get my order in. Love those guys.

[@ChrisMaj]

I think they're sold out right now.

[@ShainAndrews]

@@ChrisMaj Figures. The great American banana strike of 2023.

[@andrewtetley3883]

Beautiful Chris such a great finish on mild steel, it always left tiny lumps when I did it using the old HSS cutters😊

[@Wmbhill]

Outstanding video, and a nice set of calipers sir.

[@rubisbiker4482]

J étais pas rassuré pour Chris au moment où fallait prendre la côte avec le micromètre géant et au vissage de la deuxième bague. Beau boulot 👍👍👍👍

[@adammiller4879]

I too own a very near set of calipers ,

[@tricolorbart1980de]

5:50 hahahahaha thats fun :D

[@johanneslaxell6641]

Nice machining 👍🏼👍🏼! I would never be able to keep those round. Every time I grip slightly thinner pieces they tend to get out of round. Sometimes it feels like turning pieces around make them "oval"...

[@user-kq4xc4bg9c]

Красотаааа !! Beauty !!

[@Dreamer3K]

thanks for ueing the banana standards

[@currentbatches6205]

3:01 - Cutter leaved a wonderful finish 3:44 - Shame you can't use the Pi Tape on IDs. 5:40 - That had to come from Curtis! 5:49 - Yep. (and just the next comment) 7:58 - Several of the tolerances are just begging to be mis-read. 12:35 - No squeak; dampened mic frame? 12:57 - Bet that ID finish is going to get a clean-up. 15:47 - Did you let the temps normalize first?

[@cocojojo1850]

Beautiful setups

[@cyclingbutterbean]

Tricky part? Looks to me like you've had plenty of time to master your 3 wire magic skills. Never really liked using 3 wires. Just something you had to learn and use.

[@car9167]

How do you set the tool offsets? Can you show for one of the tools in a future video?

[@car9167]

Small button magnets to hold the measuring threading wires temporary!?

[@nono-qh6sk]

Mr. Chris, can you recommend some speeds and feeds for turning and drilling tantalum?

[@godvader2646]

Hello Chris, why don't you cut the threads with solid profile plates ?

[@aquilaaudax6033]

✋🏼🇦🇺👍🏼

[@TheBonnetq]

A36 is so nice to cut

[@karelian7610]

Cnc??? Con tornillos exagonales en la torreta??

[@Lathe.Lab-vc3td]

My lathe shop is the same

[@TexDrinkwater]

13/16? 15/16? Wait, who the hell sends drawings by fax? 😒 Also, @5:41 Is that Starrett? Mitutoyo, maybe? 🤣

[@ChrisMaj]

We get a lot of these old drawings.

[@theessexhunter1305]

Faultless.

[@frankd3024]

1.478🍌 = 24.636🍐 … 🙄

[@jimlaxdal9023]

First👍

[@jdshqs]

wow

[@adammiller4879]

Those drafters really need to use a computer because their hand writing is atrocious.

[@ChrisMaj]

The date on them is 1959, and they probably were photocopied hundreds of times.

[@fatbody111]

It’s also handy when they are converted from Japanese to English then metric to imperial then back to metric.

[@adammiller4879]

@@ChrisMaj I gotcha, That makes it okay then Lol. Just imagine somewhere someone has the master copy maybe

[@user-wr8ox8xn8m]

снял деталь и нет размеров))

[@MrKotBonifacy]

2:13 - 15/16". 3/4 = 12/16", and since the distance "on the left" between witness lines is noticeably greater than the one on the right, then it must be 15/16'... probably ;-) Or, alternatively, just tell those idiots to switch to proper measuring systems for machining, foots and inches are good for making barns or wooden cart wheels ;-) Or, at the very least, tell them to use decimal inches.For a God's sake, 13/16" on a technical drawing? Where did those hillbillies come from?

[@user-ms9uk4bh9o]

Он у трехсотчиков норму ворует