Beat The Heat with a Turbo Blanket!

The Aeroflow Performance turbo bag / blanket range provides high quality material selection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat produced by your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartment such as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-temp Silica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.
Universal replacement turbo bag springs available AF59-2100
The internal rating of these bags is up to 1370°C (2500°F).
The external rating of these bags is up to 1370°C (2500°F).
Note: When installing Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.
Our Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquids such as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. Aeroflow Performance are not responsible for any fire related damage caused by flammable liquid contamination.

[@jimmiller4951]

Good video. I have a Holset H1C with an HX35 intake . Do you have a bag that will fit ?. It is on a 1991 Cummins 1st gen deisel.

[@aeroflowperformance]

Hi Jim, we don't have a specific listing for Holset however if you take a look at this listing, in the photos there is a chart with basic measurements so you should be able to find something that will work: aeroflowperformance.com/af91-8802-turbo-bag-carbon-gt30-gt35