There are flag animation in blender tutorials, and then this masterpiece.
@00TheRealTC3 ай бұрын
I come back to this one every now and again to remind myself of the steps, especially if I want the flag animation to start from the flag at rest. (You'd think I'd have remembered everything by now, but whatever). Thank you so much for making such an easy-to-follow tutorial.
@ArtInMotionStudios3 ай бұрын
it's a pleasure, happy to hear it has been helpful!
@ArtInMotionStudios3 ай бұрын
Updated the project files to be free to all members of my patreon including free, www.patreon.com/posts/how-to-make-flag-35759163
@nafisbernafas90733 жыл бұрын
Thank you! This is the CLEAREST Blender tutorial I've watched on KZbin so far.
@ArtInMotionStudios3 жыл бұрын
Glad it helped you! Thank you!
@Phoenix-gz9xb4 жыл бұрын
Instead of changing one of the settings to fix that little problem, you can just go back to frame 0 and press righ key to go forward 1 frame. That usually does it for me
@sithumthathsarakoswattage36784 жыл бұрын
This one video is unfairly underrated!
@ArtInMotionStudios4 жыл бұрын
really appreciate that!
@Tardvark4 жыл бұрын
Finally, a blender tutorial I can actually follow Thank you
@ArtInMotionStudios4 жыл бұрын
Glad it was helpful!
@ramzyabdul1853 жыл бұрын
Even I subscribed same time, it's straight forward
@LeClusterFunk3 жыл бұрын
5:55 Or you could simply key frame the force field to start with a force of 0 on frame 1, and move to a later frame and increase that amount.
@ArtInMotionStudios3 жыл бұрын
yes you could be then you would waste all that time simulating the parts of the animation you don't even want to see.
@EspacX4 жыл бұрын
A worthy introduction to a very useful tutorial. Thanks!
@malsawmliana59985 ай бұрын
Clear and calm excellent tutorial. Thank you very much.
@Chubophobic3 жыл бұрын
Wow, just did this tutorial. Easy to follow, simple, not overly complicated. Thank you so much!
@ArtInMotionStudios3 жыл бұрын
Glad it helped!
@justforfunflowers800110 ай бұрын
Thank you.
@archonandrogenpharmacokinetics2 жыл бұрын
the ideal tutorial
@ArtInMotionStudios2 жыл бұрын
Glad i could help
@peculiarhumanbiped2 жыл бұрын
Thanks a lot for this tutorial. It's very good explained and easy to folow!
@ArtInMotionStudios2 жыл бұрын
You are most welcome. Glad it was helpful!
@Guilherme5988 Жыл бұрын
Very nice! I recommend testing augmenting the streght of the wind. It's fun
@Flareastic3 жыл бұрын
u deserves a million subscribers
@Mr_Kisch2 жыл бұрын
Love this tutorial. I am also South African!!! Hope you are still killing it!
@ArtInMotionStudios2 жыл бұрын
Lekker boet! Always happy to know I am helping!
@skullkssounds19382 жыл бұрын
A fellow SAFFA!!! WOO!
@gulftrophy4 ай бұрын
Nice Information
@JackTheSt_Ripper2 жыл бұрын
So easy and well done explained. Easy to follow. Thank you this tutorial
@adityaferryansugiarto58564 жыл бұрын
Thank you for your tutorial and all the answer you gave to the comment, much appreciated
@ArtInMotionStudios4 жыл бұрын
It's a pleasure! I am here to help! Thanks for the support!
@pietraolegal Жыл бұрын
Thanks for the tutorial! But i've encountered a problem where the flag i've used is rotated the wrong way, in this case, rotated vertically instead of horizontally, could you help me with this one? thx
@ArtInMotionStudios11 ай бұрын
if its the texture thats wrong just flip the UV map,
@kel_2 жыл бұрын
Awesome
@7knff7673 жыл бұрын
ur legend in explanation
@DonSPa19593 жыл бұрын
thanx your a great teacher even i was able to understand how to do this,i was surprised
@ninotchka35677 күн бұрын
Great tutorial! I was wondering if it's possible to have waving effect as loop?
@vitaliiustymenko9301Ай бұрын
It was a great one! Thank you!
@happymhlanga4609 Жыл бұрын
this was good easy to understand
@FebiMaster3 жыл бұрын
When i tried to lengthen the timeline from 250 to more than that, the cloth simulation always stops at frame 250, why is that?
@mindofgabe2 жыл бұрын
If you go to the physics properties tab under "cache" you'll find the start and end frame. Just increase the end frame to how ever many frames you need :)
@wtflorian41194 жыл бұрын
Thank you, works like a charm.
@nosignal57353 жыл бұрын
Thanks for this tutorial, it helped a lot and it's easy to understand
@ArtInMotionStudios3 жыл бұрын
Glad it helped!
@fullmetajacket20902 жыл бұрын
how do i thicken the flag? if i extrude the plane, cloth stops working edit: added solidify modifier
@TALKINGTOTHEMOOOOOON2 жыл бұрын
very good bro , i loved it i made it for India flag coz im Indian😎😎
@ArtInMotionStudios2 жыл бұрын
awesome glad it was useful
@hmshood319 Жыл бұрын
This is a great tutorial, however something I noticed when trying it out for myself is that the texture on the flag gets a little "choppy" during the animation.
@ArtInMotionStudios11 ай бұрын
should improve once cached. also the heavier the mesh the slower the play back will be, it should render fine
@hunchotheboss61193 жыл бұрын
MAD LOVE OUTTA KENYA
@azhdarmuhamad47873 жыл бұрын
Nice job
@24adithyanonline4 жыл бұрын
Yee Now that I know how to make an animated flag, I can now animate the USSR Flag.
@PhonedIn3 жыл бұрын
This was very helpful for me, thanks for making this video.
@ArtInMotionStudios3 жыл бұрын
Glad it was helpful!
@haiderkamal11063 жыл бұрын
Thanks! btw any guide for how to export this as an animated model for Unity?
@ArtInMotionStudios3 жыл бұрын
Not sure but try export as alembic as far as i understand that should work.
@mamadshonazaramonov30104 жыл бұрын
Lovely. Of course, we want more of that. Keep it up bro
@ArtInMotionStudios4 жыл бұрын
Thank you. That's the one I am using.
@aashmitshrestha37973 жыл бұрын
ALSO THANK YOU SO MUCH, IT WAS SO HELPFUL!
@qthecaptain Жыл бұрын
How do I go about looping this flag animation for 1 min seemlessly?
@ArtInMotionStudios Жыл бұрын
Not an easy task with a simulation, there are some tutorials out there but I would most likely resort to using a Noise deformer of some kind rather than using a Cloth sim if i wanted to make a loop.
@qthecaptain Жыл бұрын
@@ArtInMotionStudios I gotcha. Yeah a lot of those tutorials are a bit confusing to a beginner like me… so what I ended up doing was following this and then cross fading it in Final Cut Pro. Lol. Im zoomed in on the cloth so no one will kno the difference lol
@neth772 жыл бұрын
This is great, thank you!
@p.kmations4 жыл бұрын
how can i rotate my image texture in the shading?
@ArtInMotionStudios4 жыл бұрын
you do do it by either rotating the UVs or by using the mapping node
@p.kmations4 жыл бұрын
@@ArtInMotionStudios Thanks, but i think ill need a tutorial on that cause am just a begginer.
@rodrigothread18483 жыл бұрын
thank you man, great tutorial!
@tripi-da-world-isanime50833 жыл бұрын
I am subscribing course I am South African too and your video is very helpful
@ArtInMotionStudios3 жыл бұрын
Thanks you! 😁glad it was helpful
@searchingforcoconuts22484 жыл бұрын
lekker may bru....
@searchingforcoconuts22484 жыл бұрын
so, me again... followed and applied the steps in the tutorial no problems... however, I have another blender project that I have tried to apply the flag to... as soon as I check the self-collision, the flag no longer reacts to the force (wind) and crumbles badly. Tried changing the object's weight and wind strength, no luck... any suggestions. Unfortunately I cannot add a screenshot. Any assistance will be much appreciated
@ArtInMotionStudios4 жыл бұрын
Sometimes changing the setting resets it but also make sure you are at the start of the timeline. If you don't come right send me a message in my discord channel.
@turkibasultan42252 жыл бұрын
Can you make Hadramout plz
@ArtInMotionStudios2 жыл бұрын
The Hadramout flag?
@DamienAlexander4 жыл бұрын
4:26 my blender version doesn't say Mean Crease anywhere, i skipped this step and then the animation got very slow. I'll try again soon!
@ArtInMotionStudios4 жыл бұрын
The latest version of blender it is just called "Crease"
@ArtInMotionStudios4 жыл бұрын
as far as it being to slow goes turn off the subdivision modifier make sure it is after the Cloth modifier and not before it.
@lioncrud90963 жыл бұрын
is there a way to "parent" the cloth to the pole or an armature bone so you can move the flag around?
@ArtInMotionStudios3 жыл бұрын
Yes you just parent the flag to the pole. The pinned part of the flag will follow the pole.
@lioncrud90963 жыл бұрын
@@ArtInMotionStudios cool thank you!
@KamranKhan-ew2yd3 жыл бұрын
How to make it into a seamless loop animation.... I mean its movement is quite uneven so is looping even possible
@ArtInMotionStudios3 жыл бұрын
Na not really possible to loop it sadly.
18 күн бұрын
Thanks a lot
@AllAboutMahalima4 жыл бұрын
There's no subdivide option when I do right click
@ArtInMotionStudios4 жыл бұрын
Make sur3 you are in edit mode, You can also click on the edge menu in edit mode, you will find the subdivide option. Also make sure your setting are set to left click select in your preferences.
@codedbythet56394 жыл бұрын
Just came across this video. Excellent Job! I am trying to export to fbx, but the animation is not being added to the fbx. Do you have a video for that?
@ArtInMotionStudios4 жыл бұрын
Is it a character rig or just an object? Make sure to tick off animation in the export settings for FBX. And where are you important it into? Sometimes some features like deformers won't come over so you need to bake the animation and even then the software you are importing it into might not support some things.
@p.kmations4 жыл бұрын
After adding the second cloth my flag disappears, yours does to but returns after you select the vertex group but mine doesn't
@ArtInMotionStudios4 жыл бұрын
just go to the start of your timeline frame 0
@p.kmations4 жыл бұрын
@@ArtInMotionStudios Thanks , though i feel so stupid😅
@ArtInMotionStudios4 жыл бұрын
@@p.kmations haha 3d is full of confusion so don't worry it's normal to get stuck with when simple solutions fix it.
@aa-qx1cg3 жыл бұрын
How could I put my flag animation onto a still picture background?
@ArtInMotionStudios3 жыл бұрын
You can use the compositor or Adobe after effects. Turn on transparency in the render setting and render as a png sequence.
@CodyMapping3 жыл бұрын
if I import a flag its the wrong way round, so instead of Black, Red, Golden from top to bottom its Black, red, Golden from left to tight. How can I change that?
@ArtInMotionStudios3 жыл бұрын
depends what you mean. If you are talking about the texture you can just flip the texture in photoshop or flip the UV in the editor.
@AS-ds4in2 жыл бұрын
When i add collision to the poll my flag gets sucked in? how to solve this
@ArtInMotionStudios2 жыл бұрын
Make sure the flag is not already intersecting with the poll. If it is too close it might get pulled partly inside the poll.
@pianomusicarchive76202 жыл бұрын
what a wonderful tutorial... thanks sir
@ArtInMotionStudios2 жыл бұрын
You are most welcome
@cud46124 жыл бұрын
I was wondering how you could make it so that the animation loops perfectly?
@ArtInMotionStudios4 жыл бұрын
it's a simulation so that's very difficult, you can try turning off gravity and just using turbulence instead of wind and just animating the Rotation of the turbulence field. or instead of cloth use the wave modifier.
@cud46124 жыл бұрын
@@ArtInMotionStudios Thanks for the help, I'll give it a go!
@nathandelacruz56394 жыл бұрын
My flag would stop flapping once it hits the 250 fps mark. I have 600 frames all in all and my frame rate is at 60 so i get 10 seconds. What's happening wrong with it if anyone knows?
@ArtInMotionStudios4 жыл бұрын
Under Cache you need to set the start and end frames.
@nosignal57353 жыл бұрын
How to import this waving flag to unity? edit : When I import it, the flag is invisible on 1 side and it's not waving, what's wrong?
@ArtInMotionStudios3 жыл бұрын
the one side being invisible is a limitation of Unity, to get rid of that you might need to add thickness using the solidify modifier, might work. as far as importing the animation goes, i am not sure if it is possible to import simulated animation into unity Check this out. blenderartists.org/t/export-cloth-simulation-animation-to-fbx-file/1233863/10
@DonaldDrennan2 жыл бұрын
Now I want to wave that flag around. I parent the flag to the pole, hit play, and the flag moves down to the bottom of the pole and no long blows in the breeze, and when I move the pole, the flag doesn't move along with it like it should. What is happening? How do I fix this?
@ArtInMotionStudios2 жыл бұрын
Delete the cache, make sure you are on frame 0, make sure you aren't making the animation itoo fast it could be breaking away from the pole.
@DonaldDrennan2 жыл бұрын
@@ArtInMotionStudios I managed to fix it, but I'm still not sure what was going on. I couldn't get the flag parented to the flagpole correctly. It would move to the origin point of the flagpole when I parented it. If I moved the flagpole's origin, the flagpole would move so that the origin point was at the world center. Nothing was happening as expected. I reset everything undid all the parenting and started over. A tutorial showing how to do the parenting and pivot points would be helpful. The flag's movement has to be at the point where a hand holds it, but the flag has to be parented at the top of the pole, not the pole's pivot point. I had to use an empty.
@LaRay3142 жыл бұрын
I have a problem. When I put in the texture I had created with photoshop than the texture is to width. And when I scale the texture that a circle is a circle than there are more than one circles on the flag. I think the texure is too small or the flag to big, but when you put it in than there wasn't thsi problem.
@ArtInMotionStudios2 жыл бұрын
Rather go into the UV editor and change the size there
@LaRay3142 жыл бұрын
@@ArtInMotionStudios The problem was that the object wasn't unwrapped. But thx.
@jbzavala7354 жыл бұрын
Great tutorial! The flag I am trying to create is a logo with text on it. Everything you said worked great, however on the other side of the flag, the text is backwards. Is there a way to fix this?
@ArtInMotionStudios4 жыл бұрын
Thank you, All you need to do is make a make a double sided shader using the geometry node using the Back facing output, and use the Texture coordinate node with a mapping node to flip the texture by setting one of the scale values to -1 here is a tutorial to make a double sided shader. kzbin.info/www/bejne/Z4nNh6ivqsqabdk
@aniichan54872 жыл бұрын
man the flags gets messed up when rendered or while rendering any solutions? ty
@ArtInMotionStudios2 жыл бұрын
Did you bake it?
@Dyborowicz29592 жыл бұрын
My flag's Animation stopped. My flag doesn't flow anymore in one moment. What to do?
@ArtInMotionStudios2 жыл бұрын
In the cache options change the start and end frames. Also delete the cache and re-bake.
@dylonkejhu3 жыл бұрын
how do i extend it to 2 minutes and not let the animation stopped ?
@ArtInMotionStudios3 жыл бұрын
under the cache settings set the end frame.
@dylonkejhu3 жыл бұрын
@@ArtInMotionStudios thanks, you saved my life !
@dj_fox114 жыл бұрын
*_Can someone please help! I'm following this tutorial fine and when I click Tab to exit out of edit mode my plane disappears. Help is much appreciated._*
@ArtInMotionStudios4 жыл бұрын
Go to the first frame on your time line.
@dj_fox114 жыл бұрын
@@ArtInMotionStudios That Worked! Thank you so much!
@infology33 жыл бұрын
When i render my flag .flag doesn't wave but when i see in solid mode or look dev mode flag is waving please tell me how to solve this problem❗❗
@ArtInMotionStudios3 жыл бұрын
Did you bake the sim?
@infology33 жыл бұрын
@@ArtInMotionStudios yes i follow all the steps
@ArtInMotionStudios3 жыл бұрын
Sounds like a problem with your render settings. Join the discord and send me screen shots of your render settings.
@infology33 жыл бұрын
@@ArtInMotionStudios While making flag,in rendering process 50 to 60 frames are waving but the remaining frames are not...What should i do..??
@ArtInMotionStudios3 жыл бұрын
In your cache settings on your cloth modifier you need set the start and end of the simulation and redo the bake.
@danielbrylka22283 жыл бұрын
Hi, I was following along your tutorial, thanks for sharing it. I started out with another older tutorial from Andrew Price, who created square faces before subdividing the flag x times. I am playing around with the values in blender 2.92 beta. I am getting artifacts in the size of single square faces in shading mode. It looks like single faces flip or something similar. I wonder why I see this problem. Maybe someone has a hint of how to fix that? Thanks (PS: It seems to appear when the flag flaps that much I can see the backside of the polygons.)
@ArtInMotionStudios3 жыл бұрын
Sounds like you might have double faces. Or the normals are flipped. Might be easier to start from scratch. But you can try this go into edit mode, select all a by press A on your keyboard the. Press M for merge and select by distance. Could also be normals select all again then press Shift N and that should fix any normals. Also make sure if you have a solidify Modifier to delete it or make sure it is after the cloth modifer If it looks strange still just start over and be careful of extruding by mistake. That should fix it
@danielbrylka22283 жыл бұрын
@@ArtInMotionStudios Thanks for your help. The model seems fine, the faces are all ok. In Cycles it looks kind of ok. Maybe its a display bug on Mac? I guess, I still have some values not ok and the flag folds too much unto itself at times. As I did not see any artifacts on both tutorials, I must have done something .
@ArtInMotionStudios3 жыл бұрын
@@danielbrylka2228 add join my discord and post there.
@danielbrylka22283 жыл бұрын
@@ArtInMotionStudios thanks again, I think I got it. It was the backfaces, they showed the problems. The texture that I use has no alpha, but the material/settings/blendmode was set so Alpha Blend by default. It change it to opaque and the problem is gone.
@tzopatzopa98942 жыл бұрын
why when i convert and save the glb file, and open it, my animation doesn't work . in Blender it works but in glb doesn't . can you explain me plaease what should i do for this , thanks a lot !
@ArtInMotionStudios2 жыл бұрын
I haven't exported as glb but looks like it is a limitation with the export. this might help you discourse.threejs.org/t/cloth-physics-to-gltf/6561/3
@functionacademy2 жыл бұрын
where about south africa sir
@aniichan54872 жыл бұрын
hm just wanted to ask that if i do multiple flags so i bake them all?
@ArtInMotionStudios2 жыл бұрын
Yes baking them all is best. You sont have to but it is better to do it
@ratfyodor_ Жыл бұрын
The tutorial was very easy, but my flag is upside down pls tell me what to do?
@tobiasrodrigo7947 Жыл бұрын
just rotate it 180
@ArtInMotionStudios Жыл бұрын
rotate just the UV or flip the Texture in photoshop.
@MfundoShabalala3 жыл бұрын
Baie dankie!
@user-lt7yq7it7o2 жыл бұрын
Hi! Thanks a lot for your tutorial, very helpful and well explained. i got a question: When i copy paste my flag in another project, I move it to the desired place but when I press play the flag goes back to the initial place where it was pasted. Do you know how I can correct that? thanks
@ArtInMotionStudios2 жыл бұрын
Delete the bake and bake again
@user-lt7yq7it7o2 жыл бұрын
@@ArtInMotionStudios Thanks!!!!!
@user-ko5td6tg5m Жыл бұрын
❤❤❤❤❤
@KalmarBall2 жыл бұрын
this was so usefull thank you
@ArtInMotionStudios2 жыл бұрын
Glad it was helpful!
@naeembabakheil2 жыл бұрын
v good
@mickcarson85042 жыл бұрын
Hi there. First, my version is 3. Secondly, can I export, then import the flag into a Men of War game editor? Is it easy or hard to do?
@ArtInMotionStudios2 жыл бұрын
No idea depends if it can support the cloth sim. Chances are it would be easier to re texture an existing flag asset that is already in the game editor.
@mickcarson85042 жыл бұрын
@@ArtInMotionStudios Hey, happy New year. Thanks for responding. The game already have realistic flags added by the game developer, Digitalmindsoft, but I wanted to import flags that I made with Blender into the Gem engine files that are hard to open and insert the flag files from Blender. Usually they are WinRAR files. So, I don't know what files type Blender generates. Digitalmindsoft are staying tight lipped about this. They don't even tell me what program they use, is it Blender of another program, e.g. Silver light, Maya, etc. I've been trying to do this for 9 year. Each time I do it, it becomes a failure.
@ArtInMotionStudios2 жыл бұрын
@@mickcarson8504 winrar is just a compressed zipped file Download Winrar to unzip those files and see what files time is inside.
@TheRandomStoryBoy Жыл бұрын
my flag shrivels up
@ArtInMotionStudios Жыл бұрын
make sure the flag is not inside of the pole and that you are on frame 0
@TheRandomStoryBoy Жыл бұрын
@@ArtInMotionStudios thanks
@Chubophobic4 жыл бұрын
At 0:49 he says "go to our box in the corner". The box says "Add Cylinder" I don't have that showing up, anyone know what's happening?
@ArtInMotionStudios4 жыл бұрын
very odd but after you add the cylinder don't click anything else or that dialog box will vanish. it should be there. but you can also try clicking on file >defaults > load factory settings.
@user-pc6kj5gl5o Жыл бұрын
Hello Art In Motion Studios, I would like to know how to use this flag with the animation in Unity and what is the easiest way to record this animation on Blender and then use it in Unity.... please help me... would be very nice. thanks in advance.. I like that tutorial.. Well I made the flag.. ad it helped me.. but could you please make a video about that.. so I could understand how to do this.. would also be nice if you would text me here.. thanks!!
@ArtInMotionStudios Жыл бұрын
Hi Sorry missed this. Sadly i haven't found a way to bring it into Unity.
@dasskla83 жыл бұрын
Pinning doesnt work
@ArtInMotionStudios3 жыл бұрын
make sure the cache was deleted and the cloth is no longer baked, also make sure you are at the start of the timeline,
@qianjinTV2 жыл бұрын
My friend, what format do I have to save the flag model in to make sure it will float in other scenes as well.
@ArtInMotionStudios2 жыл бұрын
Just got to bake it then reference or append it into another scene.
@qianjinTV2 жыл бұрын
@@ArtInMotionStudios Good friend, thank you very much, your video is very interesting, I hope more people can follow your channel.
@larrytchogninou54383 жыл бұрын
How to export that animation has fbx ?
@ArtInMotionStudios3 жыл бұрын
as far as i know FBX does not support that type of animation.
you can try this method. kzbin.info/www/bejne/qZ_OiZ6qebmDea8
@aashmitshrestha37973 жыл бұрын
how to export it as a gif?
@ArtInMotionStudios3 жыл бұрын
you will need to render it out as PNG sequence and use photoshop or another program to convert into a Animate d Gif.
@mahmudafiya67053 жыл бұрын
you litarally saved me before i got spanked my mother because i have a project of making a 3d flag and i forgot about it and u teach me how to do it thanks so much!
@ArtInMotionStudios3 жыл бұрын
It's a pleasure! Glad i could help you!😁
@jbstepan4 жыл бұрын
I followed it but the Image on the flag shows up like this, imgur.com/a/CZXYJi3, can anyone help?
@ArtInMotionStudios4 жыл бұрын
tab int edit mode and under UV menu select Smart UV unwrap.. make sure you are at the start of your timeline
@jbstepan4 жыл бұрын
@@ArtInMotionStudios thanks
@Firytama233 жыл бұрын
I Don't Know Why my blender its 'Not responding'
@ArtInMotionStudios3 жыл бұрын
Resolution Might be too high
@mickaddis90282 жыл бұрын
the intro tho
@Harukazehigashi3 жыл бұрын
how to make long time waving flag in 1400 keyframe?
@ArtInMotionStudios3 жыл бұрын
Set your end frame in the cloth cache settings to 1400
@wadullahislam66959 ай бұрын
I need this object file ,anyone can sent me ?
@ArtInMotionStudios3 ай бұрын
www.patreon.com/posts/how-to-make-flag-35759163 Updated to include free members.
@ClassicAussieBoy8 ай бұрын
can this work on roblox?
@ArtInMotionStudios6 ай бұрын
I don't think so. But I do see there are tutorials for Roblox Flags when searching google.
@tamilhouseofcomics18412 жыл бұрын
My flag flew away. Am I missing something?
@ArtInMotionStudios2 жыл бұрын
Make sure to go to the start of the timeline and use contrains to hold the flag in place. Go through the instructions again sounds like you missed something.
@tamilhouseofcomics18412 жыл бұрын
@@ArtInMotionStudios Thanks for replying and pointing put that buddy. I am doing it from the first now.☺
@pierce90193 жыл бұрын
doesn't work, the flag just cripples into itself
@ArtInMotionStudios3 жыл бұрын
Could be a number reasons, Make sure you are at the start of the timeline and also make sure that the pole is not intersecting with the flag or too close to the pole. at the start , try apply the transforms as well. Could also be that you changed the modifiers after baking the cloth. Often easier to start again to see what went wrong than trying to fix it.
@pierce90193 жыл бұрын
@@ArtInMotionStudios Yeah np fixed it, the two vertexes were too close to the cylinder, thanks
@swarnavmisra83132 жыл бұрын
Made a Nazi flag 😂
@Phoenix-gz9xb4 жыл бұрын
Why these videos go through fundamentals? People know fundamentals when they look for this kind of stuff already
@ArtInMotionStudios4 жыл бұрын
they might be looking for a solution to make a flag having never touched blender.
@Phoenix-gz9xb4 жыл бұрын
@@ArtInMotionStudios what are the chances of that? Majority of people looking for these videos know the fundamentals.
@ArtInMotionStudios4 жыл бұрын
@@Phoenix-gz9xb a lot more common than I would have thought to be honest. Also this is still aimed at beginners.
@yedanaagya47534 жыл бұрын
@@Phoenix-gz9xb Right
@PONYBOYonline4 жыл бұрын
I just started blender and wanted to make a flag.....what are the chances.....