Beer Money Rundown

[@LearningWithTitus]

Good seeing you on fastest car man

[@LearningWithTitus]

I know he had him smoked he was about to walk off

[@chuckford4393]

It was a easy win for him until he lost it

[@beermoney5498]

@bigpigslapper Oink manny khosbin

[@johnhilton9023]

Is there a link for the race on Fastest Car when he whooped that Tesla? I can’t find the race.

[@joshwynn1836]

I have much respect for Lysle, going through what he went through, conquering and overcoming fears of getting back in the car. I'm sure there's some PTSD involved, which is what I'm dealing with. Seeing him drive gives me inspiration that my life will get back to a somewhat normal way...I don't know, but I love what you guys do, have much respect for you Mr. Harrell, and know my car keeps my sanity in check, just wish I had the money to be out racing! You use a 10296 oil pump with that pan? I love that Summit Racing steel pan, they are well put together for $300! I need to upgrade my oil pump, after adding the turbo, hot oil psi. is down in 20's, from high 30's. Hopefully oil pump and pan make my SBE LS1 live a while in the car! Thanks guys!

[@HoustonKilby]

Cool video man! I’ve enjoyed watching the 10k builds on KZbin!

[@NightmareOnYourStreet]

Badass ride. Loved seeing being built and ran on all the shows. Stay Safe And have fun fellas!

[@BowedUp]

Amazing build! That thing is a monster

[@jkheslekrants]

Lovin this, Thank you Fellas

[@lslife4014]

Just saw the netflix show couple weeks ago ur amazing story inspires alot of ppl to keep going thanks for the inspiration to always keep moving with something that u love

[@keefespencer1173]

Which Netflix show is that?

[@lslife4014]

Fastest car

[@hooligans_garage7465]

Great content! What lifter are u you guys running to spin 8k?

[@clint.garage.6092]

The lt rod thing is clever.

[@BotelloPerformance]

what lifter did yal go with

[@woodgrain18]

Iv had zero problems with my summit intake and 102mm TB and rails it's been on a 300ci (3.82 bore 4.8) with stock gen4 rods half filled block and CNC'ed 799's from texas speed with BTR springs and a mean little cam from LJMS with a billet wheel 78mm VS china boy turbo it went 5.60's in my 3346 pound 99 z28 now it's on first aluminum block setup it's a forged .10 over 1/2 fill ls1 block TSP crank and rods with diamond pistons and ARP studs every where I reused the same cam and heads off my baby motor except the the block and heads are o ringed now I stepped up to billet wheel 85mm t6 from VS, its seen 29 pounds so far and been a little quicker than a 5.40. Them two motors where my first complete engine builds except for the machine work but For the money you cant beat them damn Shanghai bread boxs lol. My goal is to go a 4.99 before I turn 30 I only got a year left to do it. Yall keep it up I hope yall whup ass again this year I got money on yall so dont let me down!!! LoL

[@littlebastardsracing4799]

seen u on faster cars nice work.car was fast on the show.keep trucking do ur thing🔧

[@john-sutton-tn]

Glad you and the Car is good!! Monster of a car!

[@TrampusWingo]

Love this car, and your team. If you get a chance, how much do you guys weigh in, and did you fool with the ring gaps at all? Thanks, and keep on fucking them up!

[@chris_ennis2694]

Awesome video guys!!

[@brianbritt7797]

Peoples going to cry when you do more with less

[@hillbillyherman738]

So how much did it cost to build the engine I have a 5.3 I am stabbing in my rusty 73 Chevy truck I have seen beer money run and damn I’d love my truck to run half as good

[@chadrobertson6915]

How much does the car weigh?

[@woodgrain18]

Yall are fuckin awesome I talked to you a lil bit at radial fest yall had the orange nova. I thought in the show you said it had LSA rods in it and if possible I would like your opinion on o.e lsa rods

[@jbsgarage8260]

What kinda iats you guys seeing with no intercooler meth or nitrous?

[@mikeschiavoni5973]

Turbo placement is really cool. Y'all sound close by maybe south Ga.

[@TEEMONEY26]

Mike Schiavoni no sir these boys here represent the great state of North Carolina

[@mikeschiavoni5973]

@@TEEMONEY26 right on man, NC is a great state.

[@1-Six-dee]

What area r y'all from?

[@funfun8095]

Why not Precision injectors?

[@irishheathen6887]

Me and all the kids were ruiting for u on that final race bro. U woulda had em too! Still man, good job bro

[@PvtFielder91]

No intercooler??

[@Blakeneumann22]

HEY!!! Lyle its Blake your best freind I was seeing whats up with you and your racing see you later DUDE!!!

[@danielupchurch6024]

A badass is always going to be...a badass, and a hater will always hate. Everything u guys touch hauls ass so it should be to no surprise that this car runs the number almost every pass. Keep up the good work fellas!

[@benpaganoni8444]

Next up ….Barra power Fox Body that team Biggun are working on to clean up these LS's ..

[@roberthaynes1192]

I dont know if you ever saw but on fastest car you had the only lane with paint. You spun up on the shift. You shouldve won. Glad youre a hell of a driver.

[@rjd1143]

Engine?

[@williamtipene1995]

Crack up guys bloody cool

[@biggin5434]

Awesome

[@kathyyost4125]

GOOD JOB.

[@horsepowerjunkiesoftexas5243]

Glade you made it out ok on the fastest car. You had that run in the bag until it got loose.

[@ralphhaldermanjr5926]

How can i get the same cam please

[@NBSV1]

Ralph Halderman JR Call their shop and I’m sure they’ll sell you one.

[@seanedwards1838]

Your kidding, you saying the show made you pay for that engine?

[@CRAZYCAM6.7]

What the hp and torque

[@NBSV1]

poor boy's squrebody 84 Probably about 1000 if set to kill. Likely 8-900 most of the time.

[@groundzero4044]

On the show the said people ( viewers , followers ) was going to be able to win the car of their choice and take it home , did that ever took place .. ? I personally never seen any announcements on anyone winning any of this cars !!!!! Correct me if I’m wrong ..

[@williamstru2119]

Pablo Aloy I missed that too.

[@keefespencer1173]

I have seen everyone from the show run the cars they built like Disco Dean he took that Blown BBC 3rd gen Camaro and ran it in a street race down in New Orleans @ Da Pad where Kye Kelly and all the NO Street Outlaw boys are from and ive seen this car run at the track a few times all of which are in videos on here that you can watch go to Street Racing Channel and go to the video where he is at Da Pad and you can see the 3rd gen Camaro run I don't know if Disco Dean is driving it or not but the car is there and I think the other cars from the show might be there as well

[@blackz06]

Hell yeah!

[@deegan727]

Sounds like people are mad that they keep losing to a car that is a 1/3 of the cost of theirs.😂

[@corymitchell2720]

1st or second gen it rods?

[@Moneygrip]

More videos guys

[@giftedcracker]

Bad ass dragster. But I heard it pulls left. REAL hard left.

[@antoniowoods1578]

ANT1H3R0 fastest car

[@keefespencer1173]

That's all Mustang's at some point either they go hard left or hard right

[@matthewbenton142]

YoU CaNt RuN a FbOdY oIl PaN YoUlL LoSe oIl PrEsSuRe oN a LaUnCh WiTh A 60 fT LoWeR ThAn a 1.9!

[@ApostleDavids8w]

Sweeeet I wish we could talk shop on my 496

[@mikeallred4390]

Awesome