This video is about sighting in your rifle and scope.
Пікірлер: 144
@deanno70677 жыл бұрын
Hey mate, great video, I know it's something very basic for you, however it helps out a lot of people including myself. you have a very clear way of instructing, step by step like thank you all the best.
@ozziereviews7 жыл бұрын
Dean no sure mate my pleasure
@DoomFinger5117 жыл бұрын
Simple way to put it, aim for the center, where ever the bullet actually hit adjust the reticle to line up with the bullet hole. DON'T MOVE THE GUN just adjust the reticle using the windage (left/right) and elevation (up/down) knobs. Now aim for the center using the scope again. If it's off repeat the same step until the bullet lands exactly where you aim.
@mackdurr49596 жыл бұрын
DoomFinger511 he said if the knob says left, it moves reticle right. No?
@gregs86784 жыл бұрын
DoomFinger511 correct this is explained way more than it needed to be
@jackyv20002 жыл бұрын
Yeah as much as it is very informative, I feel the video got a bit confusing with ups/downs and left/rights. When sighting in my bow its literally just called chase the arrow. Using the common sense of the shooter, just turn the knob in the direction it needs to go for the reticle to chase the bullet hole when aiming in the same place the shot was taken. Chase the bullet!
@7071t6 Жыл бұрын
@@mackdurr4959 spot on mate. :)
@outbackfamily6 жыл бұрын
Good stuff. Your "beginner series" is what I think most of people look for when entering into target or recreational shooting ! kam.
@russiansoviet115 жыл бұрын
Mate you almost lost me, but in the end she finally clicked. I understand perfectly. Great video. Thanks heaps.
@rebelsyell88325 жыл бұрын
Looking throught the barrel/bore Then geting the scope on paper is the best and oldest trick in the book since scopes came out. Good video. Alot of ppl dont usually tell how the windage and elevation work eighter and how it seems backwards when you use the turets.
@mc_neville6 жыл бұрын
Use a round target for bore sighting, much easier to line up the circle of the barrel with the circle of a round target.
@thesilverbackozzy8323 Жыл бұрын
Basic, thorough and easily understandable, love your work👍
@hairyscary8511 Жыл бұрын
Great series for a beginner who just is going hunting with his mates and doesn't want to go broke either cheers for the no frills approach👍🏻
@nino-cu1wm6 жыл бұрын
Thanks for a quick demo....you made it very easy and clear to understand.
@sarnginthebrave32857 жыл бұрын
I was taught to set up on a bench and bore sight to a mark on a bit of paper. set the rifle in a frame (like a cleaning stand) and fire a shot. then strap down the rifle in the frame and adjust the frame till the crosshair is on the dot. once secure, then adjust your scope till the crosshair is on the hole in the paper. takes 1 bullet.
@thunderdownunder_au36827 жыл бұрын
great video mate! cleared at of confusion up and a lot of head scratching up ! keep up the great work!
@ozziereviews7 жыл бұрын
Thanks Matt, glad you got something from it, cheers!
@newfiepacer3 жыл бұрын
Great video, nice explanation with visual to go along with it. But I'm wondering, at what yardage do you "set up" with? I've been hearing conflicting information, some saying start at 25 yards, then move to 50 yards and then 100 if you want, and others saying to just do it at 100 yards.
@Jemalie877 жыл бұрын
I'm really liking these beginners guide mate keep up the good work
@ozziereviews7 жыл бұрын
It's only because you guys kept asking me in emails etc that I decided to do them, so I'm glad there is the audience for them :)
@antoineruffin39887 жыл бұрын
thank you so much. I'm new to shooting. and all other videos I have watched about zero a rifle scope just wasn't working for me. by you haven a scope cam and showing what goes on inside the scope helped me out a lot. thank you so much for this video
@ozziereviews7 жыл бұрын
No problem Antoine, glad you got something from it, cheers!
@sendinthedrones31303 жыл бұрын
This really helped me understand how to boresight because it is really simple not very complicated and I love your vids to like the paracord wrap
@John.John.Johnny.John.7 жыл бұрын
Thanks Ozzie. Great vid for beginners and seasoned pros.
@ozziereviews7 жыл бұрын
J Ikon thanks mate glad you liked it
@brookslide66917 жыл бұрын
The whole series is great, mate. Keep up the good work.
@ozziereviews7 жыл бұрын
Thanks, I will :)
@tonybennett49226 жыл бұрын
Great explanation as always 👍👍
@TrentusMaximus787 жыл бұрын
Thanks Ozzie. This is what I was asking the other day. Now I know.
@NaughtyusMaximus5 жыл бұрын
thanks heaps for your beginner videos they are a big help
@tomn58805 жыл бұрын
Great video. I use a chamber laser and a calibrated target on the bench in my garage, then go to 50 yards at the outdoor range and adjust to be 1/4 low on target. I then switch to 100 yards. Fire one shot, while aiming at dead center, then adjust the cross hairs to the impact point of my first shot. I shoot a few more rounds to verify scope accuracy. I will then adjust elevation, according to ballistic performance charts, to allow for rise and fall to be within 6 inches (Aim point shooting) out to about 225 yards (usually about 1.5 inches high @ 100 + or -). That way I have high confidence I will hit my target with a humane shot.
@smeggels4 жыл бұрын
Great Video mate, Been doing it like that for years, Its definitely the easiest way to do it. Can you tell me what is the Scope cam mount you use.
@Bombarchy7 жыл бұрын
great video ozzie learnt a lot as a beginner
@ozziereviews7 жыл бұрын
I'm glad to hear that mate, cheers
@FutureSerialKiller Жыл бұрын
Thanks for keeping it simple for me mate, this video helped me start to understand the whole concept of it. Cheers 🇭🇲👍
@hairyscary8511 Жыл бұрын
Exactly what I was thinking as long time target shooters over complicate it for a novice who just wants to hunt with his mates
@fascinatingniceview58446 жыл бұрын
good videos and informative..thank you so much..i realised being a sniper is not easy as we seen in the movies..😉
@sunchaserw14775 жыл бұрын
very clear... great tutorial, thanks
@rustykilt5 жыл бұрын
Mate... thanks for simplifying sighting so an idiot like me can understand... much appreciated!
@MoteofVolition Жыл бұрын
Beautiful! Thanks mate!
@AussieMark9097 жыл бұрын
Tricky to explain and no doubt even trickier to film. Good job mate, these tutorial videos are well worth the time and effort you put in. I wonder if you have considered a follow up to this taking it just that bit more advanced? Discussing things like MOA and what this means in measurements at different distances, but particularly at 100yds. I know this can be confusing and might be a bugger to explain, but if a person understands how to use it the process of sighting in can be made easier again. Thanks again for the video..
@ozziereviews7 жыл бұрын
AussieMark909 sounds like a good idea I'll keep it in mind
@rjjschumacher11 ай бұрын
Clear and simple. Thanks
@jwall78472 жыл бұрын
Great video!
@theboarhunter5 жыл бұрын
Hi and thanks for the video. Is it possible that some makes of scopes will have set the turrets in the opposite direction? Eg, up on the Windage will take the cross hairs up and not down?
@koontproductions3 жыл бұрын
great vid mate and easy to folllow
@UncleBiccy Жыл бұрын
Thanks for the guide 👍👍
@tazt67 жыл бұрын
Thank you for the video! Hope you can also answer my question: If my scope is zeroed at 100y and then I shoot it at say 300 then do some adjustments on elevation and windage and forget what I did. Is there an easy way to get back exactly to 100y zero without guessing? I know most people would count clicks and remember what play they have from each side of adjustment. But is there an easier way?
@ozziereviews7 жыл бұрын
Yes, most scopes will let you set the dial at "0" after you sight in, so for example once you have sighted in at 100 yards, you can lift the turret and turn the dial back to "0" without it actually changing windage or elevation (because by lifting the turret it's disengaging from the actually adjustment on the scope). So then when you change your windage or elevation to say 300 yards for example, it's very easy to go back to 100 because all you need to do is turn them both back to "0" if that makes sense?
@simmosmithson2347 жыл бұрын
thanks for straight forward video and instruction on sighting in. I am about to begin sighting in my first rifle scope (i have been shooting open sight target rifles for 5yrs) on a new T3x .260Rem. What is an ideal range to sight in at? would be 50m or 100m?
@ozziereviews7 жыл бұрын
100m for centrefire as a minimum depending on the calibre and what you're doing.
@suntzuwarsword19645 жыл бұрын
Thank you..I finally understand
@badmanseed89362 жыл бұрын
hey mate, I have a question that may be silly but, I sighted in my .22 tonight and was hitting 1cm 3 shot goups at 25m when the scope was at the zoom power of x3 (3x9x40mm) but lets say I zoom to the power of x5 for a better view, it seems to completely miss, is there any simple way to compensate for this? should I be sighting in with x5? i feel like this is a really idiotic thing to ask but someone explain the ZOOM physics
@MegaFrank19605 жыл бұрын
Thanks for the video Ozzie. Question please: If you are shooting a variable magnification scope, do you sight in at the lowest...middle range....or maximum magnification of the scope ? One would think it wouldn't make a difference (with a fairly decent optic).........but I'm not quite sure what mag to begin the sighting in process with. Thanks for any help.
@hoffjdod32768 ай бұрын
What you do is sight it at multiple ranges so for example 50m 75m 100m 125m 150m 200m 225m 250m until you hit the maximum range of the scope, write down the scope settings for each distance and from then on you’ll have the exact scope settings or MOA (minute of angle) for each distance. This is what snipers call a DOPE (data of previous engagement) sheet it’s also important to specifically write down the type of gun, the type of scope, the exact type of bullet your using. When you get to longer distances other factors come into play such as humidity, wind direction and even the Coriolis effect (the earths rotation) but don’t worry about that for now that is for people shooting at EXTREMELY long distances. Once you have all of the MOA data written down on your dope sheet you can print it and laminate it and get a stockholder that has a window on it and slip it in there so you’ll always have the scope settings for various distances easily available.
@Ericstiverson7 жыл бұрын
Hey being a shotgun guy for most of my life Zeroing in my rifle was hard because I didn't have a damn clue what to do but this got my custom built ar grouping 1" at 100 yards
@ozziereviews7 жыл бұрын
Glad to hear, 1" @ 100 is good work!
@aubreycoertzen86826 жыл бұрын
Great suffer mate. Saved lot of bullets.
@toddleahy80023 жыл бұрын
Mate on a new scope how once it's shooting straight, how do you re zero your turrets ? Mine doesn't have allen key but dials !! Ffp 6-24×50 optisan scope. Any help appreciated.. Thanks
@powerbreed2 жыл бұрын
Thanks mate.
@user-mk9ey3vh1x6 ай бұрын
A simple frase I use is “talk to the Bullet” if u want the bullet to go down you say “bullet go down” and adjust downwards
@ausshot837 жыл бұрын
great video as always ozzie Question when you sight in your pistols do you use the same principal or do you have a different point of aim to impact for e.g you aim at 6 o'clock to hit dead center
@ozziereviews7 жыл бұрын
Are you referring to open sights or a scope/red dot? Open sights I like to adjust so I have the bullet impact right on the front sight blade tip (if that makes sense) and if I have a scope/red dot, right on the centre of the dot or cross hairs...
@ausshot837 жыл бұрын
yes with open sights when i was doing my cat h license the instructor said to set the point of aim lower at the 6 o'clock mark so the bullet impact was dead center which didn't make sense that was for target shooting
@ozziereviews7 жыл бұрын
Use what works for you is my motto...
@wobby733 жыл бұрын
What’s your thoughts on Hawke scopes ?
@natei34365 жыл бұрын
is this a cz 527? in .223?
@vegasvato557 жыл бұрын
I am getting ready to put a red dot site on my shotgun and i am not sure how to go about sighting it? I was thinking if i use rifled slugs at some reasonable range that would get me pretty close??? Any suggestions or advice would be appreciated???
@ozziereviews7 жыл бұрын
Sight it in at 50 yards so you can see the holes and make adjustments the same way I did in this review...
@code_kanga53903 жыл бұрын
Great instructions. I'm guessing a background in teaching or the military. punctuating main points with "okay".
@petemac44287 жыл бұрын
hey mate, what phone holder / scope cam mechanism are you using?
@ozziereviews7 жыл бұрын
Pete Mac kzbin.info/www/bejne/l3u8opmDpdeIjtE
@concepthuntingfishingaus53866 жыл бұрын
thanks that really helped
@ozziereviews6 жыл бұрын
Glad it did, cheers
@iaroa27 жыл бұрын
Hi Ozzie so just to confirm from you earlier comment if I was sighting in a 223 bolt action the target distance is 200 yards? Also I have no access to a farm so I assume I can do this at a rifle range?
@ozziereviews7 жыл бұрын
Yes and yes :)
@chrispeterson12477 жыл бұрын
Cant really bore sight a 10/22. Picked up a scope for it last week, this is the best scope advice iv found so far, so ill just have a crack and skip the initial bore sighting in. Cheers again mate love the reviews.
@samjohnson98947 жыл бұрын
Chris Peterson Good info here, but just know the scope adjustments are relative to bullet impact. Bullet's high and right? Adjust scope down and left.
@woody__2236 жыл бұрын
Do you zoom in or out?
@user-ff3dm9qx2p7 жыл бұрын
which rifle is this? 308 savage?
@dtomic17 Жыл бұрын
Do you still use the segway level? Or you have changed to something else over the years?
@billloveless68697 жыл бұрын
Good video. I do have a question. I have a AR that I had a Bushnell 4-18 scope. The scope was bore sighted to the rifle. I have not been to the range yet. My question is, do I set my dails to zero before I shot or after? Thanks
@ozziereviews7 жыл бұрын
No, just get it sighted-in first then set the dials to zero... that way you can make adjustments from that zero setting to dial-in at longer range, for example if you have a 100 yard zero and you want to shoot at 500 yards, you will work out how many clicks up in elevation that will be from your zero. Hope that makes sense?
@billloveless68697 жыл бұрын
***** Ok thanks for the info. As soon as it stops raining, I'll be at the range
@ozziereviews7 жыл бұрын
Have fun mate!
@billloveless68697 жыл бұрын
***** It worked out great!! First group was less than 1 inch at 25 yards and last group was 1 1/2 at 50. The gun is great. Now if the operator can do his job it's all good. Thanks again!!
@ozziereviews7 жыл бұрын
You're welcome, glad it worked out mate...
@stocky9803 Жыл бұрын
Im curious with this one - could you also aim the scope at the bullet hole and adjust the scope until the reticle is back in the middle of the target? Does this achieve the same thing or will it be way off?
@francescocutri Жыл бұрын
Also my question. I thought chasing the centre was the way to do it? @ozzie?
@stocky9803 Жыл бұрын
@@francescocutri Thinking about it, I don't know if it really makes a difference which way you do it? But I sort of see it making more sense if you have your scope on the centre and adjust it to the bullet hole. I guess the main goal is to keep the rifle as still as possible while do it as well
@michaelvinciguerra21835 жыл бұрын
What caliber is that
@jaysonallen31003 жыл бұрын
Thankyou!
@wooblebloc6 жыл бұрын
How many meters are you doing your sighting at? Is there a recommended distance.
@ozziereviews6 жыл бұрын
100 for centrefire, 50 for rimfire is the usual guide for me
@13conair7 жыл бұрын
your target has a grid on it 1/2inch 1inch squares ect would it not of been so much easier to see in inches how high and right the initial 2 shots were say 6inch high 3inch right look at the scope it tells you how many clicks per inch to adjust ! say 4 clicks per inch (at 100) so 24 clicks down and 12 clicks left next shot is in the bull no faffing around using up expensive ammo.
@ozziereviews7 жыл бұрын
Not everyone has grids on their targets, so it's to demonstrate the theory behind sighting in, so if they then add an easier way, no problem, but they have the basic principles from this video...
@BobbySquirta6 жыл бұрын
What gun is that
@willboulton23933 ай бұрын
Also, the rifle has to be absolutely still when adjusting the turrets. Hope this helps.
@brianminghella33125 жыл бұрын
How I was shown to do it by an old boy. Get a big sheet of card or paper. Bore sight to roughly the middle. Take a shot. Then using a small level draw a vertical and horizontal line through the middle of you bullet hole. Then adjust your reticle until it lines up with the lines. Take another shot. If its within a half inch your good to go. If you want to zero it tighter than that, use a target and tweak it. Its that easy.
@mylesriley52782 жыл бұрын
how far were u from the target
@awsomedude91117 жыл бұрын
they say up wind or down wind which would change the bullet drop.
@1010mero11 ай бұрын
Haven't had a chance to test if it holds zero, but mounts just fine and has nice clear glass. Centered vertically true to a plumb line with the crosshairs which is always a plus!It's a great kzbin.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope. There's no parallax adjustment or focus ring, so may be limited to 3-7x, have to see how it is on the range. Also be aware that the rings are "look through" so you can still use irons, but they are really tall if you only intend to use the optics. On a 22LR no biggie since I'm not shooting competitions or worried about a hard cheek press. Will boresight and range test, if all goes well, I'll leave it at that!
@Master...deBater6 жыл бұрын
Hey Ozzie...does the Queen know you have that rifle???
@MrDigger4507 жыл бұрын
Hi so how do you bore sight a lever or pump action rifle? Cheers
@ozziereviews7 жыл бұрын
Buy one of the laser bore sighters or just shoot into the dirt mound at the range and start dialling in your scope til it's in the general area, then go to paper to fine tune it...
@MrDigger4507 жыл бұрын
ozziereviews cheers
@badkarma27547 жыл бұрын
How about a video on sighting a scope on an AR?
@ozziereviews7 жыл бұрын
The principle is exactly the same
@Alan.livingston7 жыл бұрын
Nice one, mate. What range do you normally zero your rifles at?
@ozziereviews7 жыл бұрын
Eh? I much prefer to walk out my back door basically and sight in on my farm rather than go to a range, load and fire single rounds only, be told when to shoot and to stop shooting etc etc...
@Alan.livingston7 жыл бұрын
Haha, I meant distance, 100m, 200m, etc. Bugger going to the actual rifle range if you can shoot somewhere else. There seems to be a lot a dissenting opinions on the topic of which is better between the 100m and 200m zero.
@ozziereviews7 жыл бұрын
Bozo The Clown ahh lol sorry misread the comment (I did think it was a strange question when I'm shooting on the farm all the time) now answer you question, it depends on the calibre and use. 223 bolt actions I like to zero at 200yards whereas a 223 semi auto I have sighted at 100yards. Rimfires generally at 50 although I'll zero at 100 if it's a 22mag or 17wsm. So it honestly depends on where, what and how I'm intending on shooting at the time...
@rogerandlyndabeall38407 жыл бұрын
Complicated. i just move the crosshairs to where the bullet went. Simple.
@aaronthain62006 жыл бұрын
You should start watching from the 7 minute mark this is what he says
@doyleskyler88495 жыл бұрын
Only if you have a good gun vice though. If you have to zero from the shoulder you will have to do it his way
@damianmoskos22993 жыл бұрын
That is what is going on u it's the same u just explaining it differently.
@woody__2236 жыл бұрын
When sighting in a rifle should you zoom in or out?
@mackdurr49596 жыл бұрын
WOODY what in the hell does that question even mean? How in God's name would you 'zoom' anywhere but 'in'/toward target?
@woody__2236 жыл бұрын
🤦♂️
@mackdurr49596 жыл бұрын
WOODY mailman?
@samuelfitzsimmons89076 жыл бұрын
Mack Durr he/she is just asking if having the scope should be zoomed in or out...
@Mizone5057 жыл бұрын
sorry oz but that is a very confusing concept. why not just drop the reticle on your mpi then wind the reticle to the cpa? mpi to cpa wind the scope that way. ie, mpi needs to go up then wind the scope the way it says to go up. same for windage. boresighting is the same. your way adds extra steps into something so simple. the older scopes used to be which way to move the reticle to mpi, modern ones it's opposite.
@googlesbitch5 жыл бұрын
Making it too complicated, look through bore and then view scope as stated, take an exact copy of the target and get a rule and measure the X Y axis (windage and elevation). Trust your scope scale adjustment usually by MOA and adjust. Most scope are 1/4 MOA per click and at 100 yards it's almost 1" to 1 MOA (1.047"). Fire a 5 shot group to get an aggregate group average accuracy and to determine the actual point of impact since no rifle is exactly the same point of impact based on 1 or 2 shot.
@azzajohnson21232 жыл бұрын
This is legit how they taught us at our gun safety course.
@brianminghella33125 жыл бұрын
A warning to anyone and everyone. Zeroing the scope is easy but what many fail to realise is that if your SCOPE RINGS are not windage adjusted to zero MOA with the centre line of your rifle bore your rifle will not be consistent in windage adjustment at different ranges ! Its nice to assume your rings/mounts are accurate from factory but many are absolutely NOT. So why is it that I cannot find one single video on youtube for checking for scope ring zero ? I am sending back a new rifle for this exact reason. The mounts are out in both axis !
@darrenstephenson55574 жыл бұрын
So left is right and down is up??
@paulsoutbackgardenaustrali76742 жыл бұрын
Exactly Bro.. in most scopes.. but not my weaver as it says on turrets "bullet impact"..tc
@Shibagaesski6 жыл бұрын
Shooting some one with a wind speed over 40 knots
@fruitful77539 ай бұрын
They first need to learn how to mount a scope properly, getting it level and straight with the gun barrel there mounting it to. Getting the cross hairs level with the gun. Mounting a gun leveler on the rail to keep the gun level then when shooting it, will train your eye to level it. You can't eyeball it, it will always be way off, and twisting the gun to compensate getting the cross hairs straight will always shoot at an angle. Then only the distance you set the scope at will work. If the target is closer you will be way off and if the target is further you will be way off because of the misalignment of the scope angle. And finding the right cartridge that shoots best is important. As one brand shoots well and a different brand will not. A hunter needs his gun to shoot with a cold barrel one shot. So when sighting in for hunting let the barrel cool off before shooting another round. Or wait till later on that day to get that cold barrel shot.