Рет қаралды 16,376
Beginner knife making part 3, Grinding the bevel on a knife.
G'day and welcome to a new series on making a beginner knife.
This is a simple little knife that is a copy of the first knife that I personally made, it has a very simple design that I first drew onto a piece of steel from a kit that i had purchased. The design was simple and made to fit the piece of steel I had by all means copy it or look at the references below.
Today is the grinding the bevels on the blade, I use a 2x60" grinder and a bevel jig to achieve this as discussed in the video do freehand grind as well but with a simple bevel as on this knife will tend to go with using the jig. I also feel that jigs make achieving acceptable grinds for a knife that you are going to sell much easier for the beginner.
Thank you for watching
Also, sometimes I link Amazon Affiliate links in the description. Shopping from these links supports our channel with a small commission without any additional cost to you! So Thank you for using these links!
Equipment I use
Australian Links
Cleco clamps amzn.to/3l6pL2I
Cleco Pliers amzn.to/3iREI6a
G flex Epoxy amzn.to/3zPYAh3
Lansky Diamond stones amzn.to/3CNEVAn
USA Links
Cleco clamps amzn.to/3x4kpri
Cleco Pliers amzn.to/37bDiP1
G flex Epoxy amzn.to/2LNCY1g
Lansky Diamond stones amzn.to/3xPzNZ6
FaceBook groups I mention:
Knife making a Hobby
/ 23113720648
Australian Beginner Knife Making
/ abkmg
Australian Blacksmiths and Knife Makers
/ 1381470675432619
Dan's Website on knife designs
dcknives.blogs...
Creativeman Website
creativeman.co...
Artisan Supplies Website
www.artisansup...
Note I do not get any payment and am not professionally linked to any of these groups, I simply use their services.
Heck I spend a lot of money on the hobby same as most other makers
Any questions that you have about custom knives feel free to contact me via:
Email
mailto:darren@downunderfarmandforge.com
Webpage
downunderfarma...
Facebook
/ downunderfarmandforge
Music: Rain
Musician: @ikonmusic
Disclaimer:
The use of Power and electrical tools and devices can be dangerous, please seek professional training before undertaking to do so.
Any tools or techniques shown hers are purely as I do it and for illustration purposes only, they are not professional training and should not be considered so.