BEGINNER'S CRICUT PROJECT: Mother's Day Subway Tile Plaque

[@samkoz5091]

I was going to buy one for my mom for mother’s day but then I saw this and realized i could use my cricut and make my own! Thank you!!

[@annmarie467]

I have to sy im a Newbie but you were clear on point direct and polite I will be following you your amazing thank you so much

[@MelissaMoses]

This is the most easiest one i haven seen for a beginner.

[@kimhaugen6604]

I am a new baby to Cricut. I made this for my Sister-in-law. It turned out great. Your directions was spot on!!!!!!! Thank you so so much.

[@veem3163]

Best tutorial thus far. I appreciate you. Thank you.

[@itsjordanlovee]

This was my FIRST project using my cricut and it went FLAWLESSLY thanks to this video! Great step-by-step directions! My family will love them :)

[@eams19801]

Thank you so much for this awesome tutorial, thanks to you I was able to do some party favors using the family last name. Thanks again!!

[@PocketWonders]

You are so welcome!

[@MsHunne62]

I really love the way you explained this and you have a good voice for teaching too. Carrie

[@michaelgoeggel4442]

I am brand new to Cricut and have been very intimidated by it. I have learned so much from your step-by-step detail in this video that I feel like I can do it and am now very excited to try. I am so thankful for your video! Andrea Goeggel

[@tommymoore165]

I am about 3/4 finished with this video, but wanted to stop to say, thank you for the step by step video from beginning design to cutting out. As a beginner , that has not cut anything, I appreciate you doing this and have already clicked subscribed!!! Sorry, Im under my sons google acct.

[@SagittariusWoman912]

Never would've thought to use painters tape. Wow.....Amazing tutorial.

[@franciscawoodward7946]

This was a perfect tutorial as I'm just beginning! Thanks!!

[@miapezzetti5621]

such an amazing tutorial for beginners! by far, this is the most easiest one i've seen for just getting started, thank you so much!

[@rebeccacatalina241]

Very informative and helpful...I appreciate it

[@cindyb9288]

It looks great.. thanks for sharing

[@nikkid7436]

This was beautiful and easy!

[@mayraolvera6802]

Thank you so much!!!! I'm a newby at this and I have learned so much thanks to you and the beautiful people of the cricut community!

[@CW-iz1tk]

Wow 😳 never knew I could use painters tape to transfer!!!! Thank you!

[@PocketWonders]

You are so welcome!

[@dianakitten1]

Thank you so much, very helpful to me as a beginner 👍

[@JustJayci_]

Wow! You explained this so clearly and made it look super easy. Now if Cricut would just ship my order from 4/22 I could try this 😭. Thanks for an awesome tutorial!

[@shannonmarie6227]

I subscribed because you made this very simple and easy to follow for a newbie like myself! More please!

[@jsu4evr]

Great tutorial. It was very easy to follow along... I'm off to make my gifts!

[@ashleyelliott5959]

Great tutorial! Very easy to follow! Thank you!

[@PocketWonders]

Glad you liked it! Thanks so much for watching!

[@aidaespinoza278]

Very detailed and easy to follow

[@mariselaortiz5968]

Thank you so much! It was so easy to follow.

[@Angelhtx__]

I agree this was the most easiest for a beginner like myself 😃 THANK YOU 😊

[@JelscreationsNmore]

Thanks so much i just done one that says senior 2021 and put my sons name on it

[@oli4oli]

I absolutely love it! A newbie learning

[@RJAvila041]

Great job...

[@supersec51]

Thank you for doing this excellent tutorial! Can’t wait to make this!

[@shelbiholly688]

Amazing video! I needed this! Thank you!!

[@caroldonald5194]

Thank you, Very easy to understand for a true beginner. Thank up

[@apylinski]

Wonderful video. Now to try it!

[@TheMotocross64]

Thank you so much, I made one finally, your video was the best for a beginner, Thank you again🌹

[@naturallysunni]

Thanks for the video

[@tawandaaiken203]

Thank you for this very beginner friendly tutorial!

[@thelearningbee8843]

Great tutorial thank you!

[@toninoblet5182]

Nice project

[@jumellesaltidor9551]

YOUR AN AMAZING KZbinR! 😁 Links for USA and CANADIAN viewers. I'll definitely subscribe. Great tutorial 😍

[@deannmoran7331]

Thank you for sharing

[@cindyfoor3710]

Love it

[@angelicacastrocendejas5944]

This was INCREDIBLY helpful!!! Thank you so much!

[@christinelindsey4335]

love it

[@angelacardenas7634]

I didn't know you can use painters tape as transfer tape. Thanks for the great tip :)

[@veronicaavila6435]

Thanks you so much for your tutorial, I can’t wait to make some.

[@tierra5020]

Thank you sooo much for this video!!! This is by far the best video on this project I've seen!! I'm a newbie and ive been so hesitant to open my cricut. Thanks for even explaining how to download the fonts!. I just subscribed and I'll be definitely watching your channel. 💙

[@justlookinggood7079]

Thanks very helpful

[@ericar3850]

Sweet, Ive been looking for a video of this! Your video makes it so simple

[@maris2716]

Loveeee itttt❤️

[@shelbiholly688]

Can you please do a paper flower tutorial!

[@joysanford639]

Awesome Video! Thank You!!

[@solangevalcarcel1639]

I love how easy you make it look 😍 question the ask me but just the name the first letter a different color than the rest how would I do that?

[@BlessedTwiceWithBoys]

Love this! What size is this tile?

[@Shayyawatchin]

Thank you sooo much!!

[@SlowDownandTurnHere]

This was a great video presentation, thank you!! How did you prepare your tile for the vinyl to stick?

[@PocketWonders]

I didn't do anything to it but you could wipe it down with some rubbing alcohol if you want to make sure it's clear of debris.

[@emmaperez8679]

Awesomeness ❤️

[@marthaliskey8924]

I was thinking of i. Jimmy

[@lynneboyer3197]

I agree. I have watched several today until I found this one. However, I hor an error saying the project wasn't compatible with my current machine Explore air 2

[@kaseysantiago-king5989]

This looks so cool, my question is can you seal this so the stickers don’t come up? If so what could I use? Thanks for this video

[@PocketWonders]

I didn't seal them but you could use mod podge or polycrylic if you wanted to seal it.

[@kaseysantiago-king5989]

Pocket Wonders thank you.

[@alishajohnson1835]

Very easy tutorial, can this be done with a Cameo 3 machine. Tfs

[@msprice4444]

Awesome video..... i brought titles a while ago to try but was too nervous. Does the [|] work only with that glitter font? Cause i don’t like that font and using a different one, but those aren’t working with the font i picked

[@patriciahall3688]

What’s the type of tile you used?

[@morgandyson9700]

i’m pretty sure it’s subway tile

[@PocketWonders]

It's a subway tile you can purchase at the hardware store. I know they're out in a lot of places but you just need to find the 3x12 one. I know people make them with all different sizes and colours though! Something like this: rstyle.me/+caGyn22ysOlin--1dXGmfw

[@JessicaMartinez-bs4ir]

Love this tutorial! New subbie. How do you get the commercial license?

[@medah1021]

Perfect tutorial!

[@pamelawilliams4535]

Where do I purchase the tile

[@betheubank3121]

What do you use for backing of tile and how do you hang or display?

[@stephaniev2906]

I recieved 4 of these for mom/grandma dad/poppa ones and i need ideas on displaying them together, not on plate holders.....

[@LL-qv8wz]

I just ordered my cricut ❤ I just subscribed to your channel.... I don't have a computer can I do this on my phone? Thank you in advance

[@denisesummers408]

Hello I was wondering if you had any problems cutting the names out and what setting did you use? My cricut keeps tearing the names up while cutting I even changed the needle thanks

[@futures.scalper.808]

fyi you have to install true type fonts for windows

[@marisamarisa3495]

Thank you so much! Do you know why my letters are tearing apart?

[@miawilliams928]

I have a cricut joy? Are the measurements the same ? Please teach me !

[@GalleryAvenueDesigns]

a question for anyone who has made one for themselves. How do you display it, hanging or standing?

[@futures.scalper.808]

well done instructions! do you teach?

[@pinayc3108]

Do you apply any type of seal over the finish product?

[@PocketWonders]

I didn't use a seal. But you can use mod podge (amzn.to/2yfDSNs) or polycrylic (amzn.to/2zauACb) to seal it.

[@laurarubalcava1273]

Thank you!

[@sylviakain4101]

What size tile is this

[@lindsaysloves4778]

This is helpful, but I'm missing something. When I go to "make it", mine isn't on two mats. I didn't weld them together.

[@MsNana1119]

Does it have to be the green painters tape, or can you use the blue?

[@PocketWonders]

Blue is fine! 👍

[@yofavyodieh2699]

Hi, where did you get that big roll of cricut vinyl from? I've never seen it come in a box before.

[@RP-vc3bf]

Super newbie Cricut Maker ( owner) question...How do you know which word Cricut will cut out first? (If that makes sense)..

[@conniecostanzi-jones4632]

Do you have another link for the font commercial license the one you have posted no longer works...looks like not the only one asking for it. Thanks

[@PocketWonders]

Thanks for catching that! Here you go! www.creativefabrica.com/product/i-love-glitter/ref/378871/

[@melissam1203]

Question....buying a commercial font off of da font is it only for 1 specific font or does the licence work for all downloaded fonts off their website?

[@heatherpatterson2544]

how do i get permit to make it and sell do u have a link

[@carinarivera]

what about for mobile?

[@ArynLeBel10]

When downloading the font and using to sell, do you have to buy the commercial license for each separate font? Or do you buy it and you can use it for many different ones?

[@PocketWonders]

All fonts have different licences. The commercial license for I love glitter is only for I love glitter. Once you buy the licence you can sell anything you make with that font. Times New Roman is free.

[@ArynLeBel10]

@@PocketWonders gotcha!! Thank you so much!

[@seneitrajones1074]

Does the painter tape have to be green?

[@PocketWonders]

Nope you can use blue as well. :)

[@audreyhill4165]

It would be easier to reverse weed the MOM font. Just something I learned from another tutorial. I pretty much only reverse weed now.

[@barbararaybuck8147]

I have done 4 of these and every time I get bubbles under the vinyl. What am I doing wrong?

[@GalleryAvenueDesigns]

Hi Barbara, Do you start applying the vinyl from 1 side lightly and then smooth it with the scrapper tool?

[@tashaungardner3955]

Goodnight, don't know if you can help me out! But I got lost in the ending, I weld all the words together, press make it and on my mat everything was it on. Whilse on your screen I saw that your words were on different mats. Where did I went wrong? #newbie

[@miryamdelatorre3431]

If you weld letters together it means you’re making them a single/cut same color. If you want it to cut on two mats or as two separate cuts (if you look at Hers the mom and the other writing are in two different colors) just weld together the writing u want in the center of the large word so that that prints as one cut. Hope that makes sense sorry

[@1dulceritmo]

Why do you need a license? For the style of the letters ?

[@djazphib]

Great tutorial! This may be a silly question but where do I get the tile from?

[@PocketWonders]

I got mine from Home depot. Links are in the description :)

[@juliolovesana]

Do you need to mirror this??

[@PocketWonders]

Not unless you are using HTV (heat transfer vinyl).

[@lakesidekennel3869]

you explain great, but im not being able to use my computer only through my phone...and im having a hard time trying to size etc....help

[@MariaJohnson17]

Lakeside Kennel same

[@ericalvsmac]

Where do u get the tile

[@morgandyson9700]

I got mine from Lowe’s

[@gaylestipe1240]

I am working on Windows 10. I see the I love Glitter font, but not the swashes. How do I find them on a Windows machine?

[@PocketWonders]

Follow these steps: 1) Go to "Character Map" (type it in the Windows search bar by your start button) 2) Find the font at the top (you will now see the basic swashes) 3) Under "Group by" (second last drop-down), select "Unicode Subrange". This will bring up a new window. 4) Scroll all the way to the bottom and select "Private Use Characters". You should see the alternative glyphs now! :)

[@kirstenenglish5525]

@@PocketWonders If you don't have the Private Use Characters where do you go get those.

[@JillJones]

I know I'm late on this, but the tile listed in your links is no longer available. Do you have a link for a replacement for that?

[@PocketWonders]

Thanks for catching that. Try this one: rstyle.me/+3pUeK6vyl-cOiK3QCKnO6Q

[@danahveitenthal8200]

how would you design this with 4 kids?

[@PocketWonders]

You could do two rows of names :)

[@danahveitenthal8200]

@@PocketWonders thank you

[@qknight2904]

What brand and size is your green painters tape?

[@PocketWonders]

You can use any painter's tape but this is the one I used: amzn.to/2WhHhDq I actually prefer thicker ones because you can work with bigger vinyl that way, but this one will do for the white script text.

[@ancustomprints]

How are you able to type in Font Book? Mine doesn't do it