So beautiful. I love the effect with little heat. I thought you needed a lot of heat to make it move. Amazing. It has so much depth to it!
@rhondasquires77703 жыл бұрын
Thank you so much, so many videos assumes the beginner should know certain things…. I did not. You are a good teacher!
@corkydavis56882 жыл бұрын
Love how the metalic comes through
@MissKissKreations2 жыл бұрын
Me too!
@cindylouwhog2202 жыл бұрын
Thank you for this informative tumbler. I'm going to try and make some.
@jeneiferthomas10363 жыл бұрын
That’s cool like Bob Ross. All those happy place in every turn. I love it.
@traceycrawford9938 Жыл бұрын
Thank you, great tutorial and beautiful tumbler!
@tlynn19633 жыл бұрын
This tutorial was exactly what I needed to see! I wish I would have watched it yesterday, when I did my first alcohol ink tumbler. It answered a ton of questions I had!! Thank you!!! This is so beautiful and a wonderful beginner tutorial!
@WillieBeard2 жыл бұрын
This is a great instructional video and so inspiring. And what a pleasant break from the "goofy-doofus-clown" videos I previously watched to learn the art form. Calm instruction and information. I’m a fan!
@sharillyatownsey4935 жыл бұрын
The best tutorial I've seen on here. Thanks for sharing
@adrinneatwater92502 жыл бұрын
I absolutely love this tutorial! I was afraid to take on this challenge until I came across this tutorial! My tumbler turned out beautifully! Thank you for this step by step tutorial
@MissKissKreations2 жыл бұрын
My pleasure!!
@gourdhead223 жыл бұрын
I will be putting epoxy on my first 2 tumblers tomorrow. A woodgrain, and tack it. I just love what you did here. So Stunning. Thanks for your time and talent. hugs Sheryl 💙🎨💙
@hopecolbert95504 жыл бұрын
I just wanted to say that I love your videos. Many of the tumblers I've made (like the peek-a-boo, blown ink and camo) have been possible because of your videos. Thank you!!
@Kathy-Carr2 жыл бұрын
This is so pretty! It kind of reminds me of one of the Monet painting colors. Love mitt, thank you! 💐
@deborahbreaux89803 жыл бұрын
I’m a newbie so new that I’m currently waiting for Amazon to deliver my tumblers as I’m writing this! I’m so gonna do this! Thanks for the tutorial!!
@MissKissKreations3 жыл бұрын
Happy Crafting!!! 🥰
@jillboehm-reyna8344 жыл бұрын
Would love a video on your tumbler/motor setup!
@donna10154 жыл бұрын
I second that!
@tracycherne29534 жыл бұрын
Do you do anything to get epoxy from getting inside the tumbler
@angieburcham29512 жыл бұрын
Thank you for the how to videos they have helped me so much!!!! Just love them
@mello_yello_23 Жыл бұрын
Great tutorial 😁
@Thedailydaysofdaisy2 жыл бұрын
This is awesome. Funny cuz I was the one that was able to mess up with this style. I added too much silver…. It took over the whole cup! My second tumbler had patches without the epoxy on the cup after it dried! Maybe I need to sand the cup or use more epoxy. 🤷♀️ I’m sure with practice I’ll get better.
@christinacarrasco70803 жыл бұрын
Beautiful! Love it so much!
@christinacarrasco70803 жыл бұрын
@@armanidouglas5347 Get out of here.
@arielbuggs7892 Жыл бұрын
I love this video
@lagorditabonitaaa3 жыл бұрын
Amazing! So simple & easy! Can’t wait to make one! 😆
@tarawebb92372 жыл бұрын
i can't wait to try this! thank you!
@iekika794 жыл бұрын
It looks like the earth from space. It’s gorgeous!! 😍
@MissKissKreations4 жыл бұрын
Thank you so much!
@sallymccornack28004 жыл бұрын
So detailed and easy to follow. Thanks so much.
@nancymassey2215 жыл бұрын
Love it! You explained it so simple!
@linessareyes65464 жыл бұрын
This is so Beautiful, I’m going to do my first tumbler using Alcohol Inks, Thank you for sharing!
@MissKissKreations4 жыл бұрын
Thank you! Good luck!
@cindyandres49382 жыл бұрын
This IS goof able. I had runs like rain that gathered when I swirled it. I think too much thick coat. I used a whole 20 ml on it. But it’s getting pitched. My cup doesn’t stay in the arm of my spinner right…. Learning curve
@beverlymccutcheon13774 жыл бұрын
I love your tutorials! I have learned so much from you. Thank you!
@sandyhardman22682 жыл бұрын
Thank you! Beautiful!
@susannebequer28322 жыл бұрын
Should you sand the tumbler before applying the decal?
@PoconoPam4 жыл бұрын
Thanks so much for this! It is Super Bowl Sunday and I am trying my 1st tumbler tonight!
@Britneymphotography883 жыл бұрын
love the colors i just got mine, it so easy and faster lol.... i did like fire truck color i am making for my uncle first time
@curlygirlzrus64313 жыл бұрын
Love the colors!! Can you use a toothpick to give more swirl or marble look or a heat gun . Which is better
@lilycessna30774 жыл бұрын
Thank you! You explain this so well!
@colabearM82 жыл бұрын
That's awesome!
@deniseroderick46783 жыл бұрын
Wow love it
@marywhitaker14204 жыл бұрын
I tried this tumbler but I put it on a glittered tumbler and the glitter showed through in places making it more shinny and I called it an angery ocean it was great
@rhondaholbrook56484 жыл бұрын
Thank you so much, your videos are great! Learn so much in each and every video 🧐
@rebeccahoon13932 жыл бұрын
That's beautiful ❤️
@suenicorogers59055 жыл бұрын
I’m definitely a beginner and I totally love you thank you I’ve learned a lot ❤️❤️❤️
@sandymoineau30094 жыл бұрын
Love it!! How do you change directions with your turner just by your hand? I need a Turner like that 😊
@wendywr3 жыл бұрын
I was so annoyed that my turner was spinning the "wrong" direction. After watching this tutorial, I tried doing what she did, and MINE REVERSED DIRECTION TOO. WHOA.
@lindagunnin45944 жыл бұрын
Great video - starting one soon
@GilBrown3332 жыл бұрын
Getting a tumbler done and I want it in ACU camouflage pattern. Is it possible to get that level of specificity?
@marcypope86812 жыл бұрын
Hi, I made my first alcohol ink tumbler 2 nights ago it’s completely dry to the touch is it done? Or do I have to do another layer of epoxy?
@terrivaughn81494 жыл бұрын
Thank you! Great video! Learned a lot.
@karenmclaughlan91282 жыл бұрын
That is one stinking cute tumbler love love it ❤️ one thing I'm confused about what is the machine you use to swirl the cups on please x
@yaya23894 жыл бұрын
I got to admit i wasn't liking it in the beginning, but the final result was amazing!
@TexasRoadrunners3 жыл бұрын
Thanks for the video.
@amandalewis48462 жыл бұрын
Love it im so intrested
@gracaoliveira15974 жыл бұрын
Perfeito! Parabéns! Uma dúvida: Você usou primeiramente prime para depois iniciar com outras tintas? Gosto muito do que você nos presenteia aqui no canal.É cada obra mais linda que a outra.😘😘
@elainetrujillo21223 жыл бұрын
Love It!!
@marybeltorres68773 жыл бұрын
WOWWWW I love it!!!
@buttonbeargrandma7259 Жыл бұрын
Just found your video. The tumbler is awesome. I have a couple of ?s. When you reverse is your turner reversible. How do you keep the tumbler from moving do you have something bigger on the inside.and do you spray paint all of your tumblers. Lots of ?s. You have helped me. Thank you for everything you do. Be Blessed
@MissKissKreations Жыл бұрын
I use a tumbler turner from SpencerCreations5 on Etsy. Before designing my tumbler, I spray paint the entire tumbler.
@dene1sec4 жыл бұрын
Beautiful, reminds me of my acrylic pours! I’m going to try this, so I’m going to watch more to see all the items needed. Love the way you instruct plain and simple! Thanks you ;-)Subscribed
@tammymollere14702 жыл бұрын
Great Tutorial. I'm going to try it again. I tried making a few like this and I ended up with a hot mess. I think a rush it!
@MissKissKreations2 жыл бұрын
You can do it!
@tinaleifker75574 жыл бұрын
Just wondering do we need a “heavy duty” heat gun or are the craft heat guns ok to use? Oh and btw beautiful tumbler! And does this work on the plastic tumblers as well? And lastly can you put a design or saying on this also? Sorry so many questions, whole new concept for me and I am absolutely amazed.
@brittanyarndt85123 жыл бұрын
From what I know you don’t want to use resin in a plastic tumbler. I have heard of people using the double wall plastic tumblers, but I wouldn’t.
@aprilowens20124 жыл бұрын
Im about to try one.... My 6yr old grandson requested a red white and black one with fgteev stickers...... and he shall have:)
@daniellebowers7911 Жыл бұрын
Do you have a tutorial on making a glittered alcohol ink tumbler?
@patriciahulkmama2 жыл бұрын
Thank you for this video. I used this as my inspiration to create a tumbler. It’s very pretty and I only had issues where some areas the epoxy has patches that are not smooth or covered. But the tumbler was completely covered prior to drying. Do you have any tips for this issue ?
@MissKissKreations2 жыл бұрын
And your tumbler down then re epoxy over. The bumps and “holes” will go away
@dshell10952 жыл бұрын
Love the tutorial since I am a beginner. If I wanted to add glitter how much epoxy would I add to seal.
@MissKissKreations2 жыл бұрын
It all depends. Roughly 20 ML total
@Angela-yn2jn2 жыл бұрын
I love the video and it is easy to follow and understand. I am going to make my first alcohol tumbler here shortly. I do have a question...if you choose not to place a decal do you still need to apply another coat of epoxy?
@MissKissKreations2 жыл бұрын
Thank you so much. You can add one thin coat of epoxy just in case some alcohol ink is exposed and not covered with epoxy.
@Sharon-jo1ie2 жыл бұрын
Just learning how to do this.. question, when you say you use alcohol ink, is that different then acrylic paint? Can I us acrylic paint when I do an alcohol ink design? I apologize beforehand for the dumb question.
@kdug75083 жыл бұрын
I'm just learning to make these but i want to make one for my brother for his birthday and i wanted to know if you could do a fire alcohol ink tumbler and then use the dish soap technique " power wash spray dish soap and then spray paint over it and then rinse with a hose". Can you tell me if you think it would or could work together? plz and thank u 😊 Edit: Oh, and then would I be able to put a vinyl decal over that?
@leewarren98173 жыл бұрын
I’m researching tumblers, came cross your KZbin and I subscribed. I have a couple of questions. If I want to add rhinestones do I epoxy over that? When add a decal what epoxy do I use over that?
@shannenyurcak59573 жыл бұрын
Thank you for sharing. Does the tumbler have to be spray painted before or can you leave the tumbler silver?
@MissKissKreations3 жыл бұрын
Spray painted. Watch my video here for some more help. kzbin.info/www/bejne/h6fKlolpaNiWfbM
@soapboxshops38162 жыл бұрын
Thank you for sharing! Where did you get your cup turner at?
@pamelalopez32772 жыл бұрын
do u have to paint your tumbler white first? if the tumbler is already white do i need to paint it white again to use the alchol inks?
@justfun12824 жыл бұрын
Hello beautiful cup, do you mind sharing what ink provides the metallic result. Thanks
@suerobinsons57943 жыл бұрын
Awesome very pretty. Can you use a hair blow dryer if you don’t have heat gun?
@MissKissKreations3 жыл бұрын
Yes you can
@cassie74164 жыл бұрын
Quick question will any alcohol ink work on the same like does it have to be Tim Holtz or Piñata inks
@forevercreating2 жыл бұрын
As beginner I have no idea what you are using that turns the tumbler? Kind regards
@tammylankford11473 жыл бұрын
Do you have have to use the white
@rosiesantos70953 жыл бұрын
Do I have to print the Tumblr?
@shoans38972 жыл бұрын
Wonder if you could do this an the beach at the bottom so it looks like waves
@kathymyers81283 жыл бұрын
Hi. I've been going thru many of your videos. Love them. Thank you for sharing. I'm purchasing all my products in preparation to try my hand at this. Do you have a chart anywhere suggesting how much epoxy to use for the type of project and size of the cup?
@MissKissKreations3 жыл бұрын
I don’t have a chart. But once you get going, and learning, you just start knowing how much epoxy to us. I know that sounds silly. I also try to add the total amount of epoxy used for each tumbler
@katiexerri7787 Жыл бұрын
Can you use alcohol ink on a quick set epoxy?
@jessienewton76004 жыл бұрын
I’m so competitive when you said, “it’s really hard to mess this tumbler up”, I took that as a challenge. 🤣😝. That being said I didn’t do all the steps like you said. Basically I tried the Milky Way over a Glitter Hombre I did earlier that I didn’t like. Then my acrylic epoxy was a mess. So then I thought oh I’ll do the alcohol ink one. Let’s just say I’m now soaking it in 100% acetone and will start over!! Oh and I decided to make my first attempt on a yeti!! #rookiemistake. Btw thank you for all your videos. Love them all!! And glad you are feeling better!
@Sandyzth14 жыл бұрын
After the heat gun, do you seal the tumbler ? I loved the video
@amyreynolds61192 жыл бұрын
Quick question - how did you prep your tumbler around the top? Or do you do something after? If so what?
@MissKissKreations2 жыл бұрын
I sand the tumbler including the rim and then wipe with 91% alcohol.
@boosbaby00334 жыл бұрын
If u can't get a heat gun right now can you use a hair dryer on low?
@danssv84 жыл бұрын
Does the alcohol inc draw into the thick clear coat you've put on or does the ink stay on top of the clear ?
@tammyanderson66964 жыл бұрын
I am going to try this for christmas where can i find a turner like that one or can i make one. This is amazing
@MissKissKreations4 жыл бұрын
Etsy has so many. Check them out. If you only need one, Amazon has plenty too!
@joniek74774 жыл бұрын
Can you use cups that have a powered coating on it? Like Ozark trail ones from Walmart. The one that are colored
@laquandacobb18884 жыл бұрын
Awesome job, do you put more epoxy at the end after the ink has been applied?
@rrjmflores4 жыл бұрын
Great video!
@lindagunnin45944 жыл бұрын
Do you put another coat of epoxy after alcohol inks have dried with no decal?
@kaylasmith78424 жыл бұрын
Can I use crystalac? If so do I do the same way
@anastasiakrueger32644 жыл бұрын
Do you ever get ripples or waves in your tumblers? I tried this twice and both times after letting it spin for 12 hours it had ripples if I felt from top to bottom, I've been told it's because my tumbler is uneven but watching urs spin ur cup was uneven and it came out good? Any advice?
@jleecortazar_mkibc2 жыл бұрын
After it is done turning, will there be another need for epoxy after the alcohol inks?
@MissKissKreations2 жыл бұрын
Yes you can add another coat of epoxy of needed
@stacyhernandez45594 жыл бұрын
Do you have to sand the cup prior to spray painting?
@Bridwell2304 жыл бұрын
I tried one of these today and I got a lot of dark colored pooling at the bottom. The colors blended correctly on the rest of the cup but I'm wondering if I used too much heat? Or what else could have caused that?
@marybeltorres68773 жыл бұрын
I made one, it’s INCREDIBLY BEAUTIFUL! Too bad I can’t post photo 🥺
@lorihill99904 жыл бұрын
Could you add iridescent glitter or a silver glitter once you've given the alcohol and epoxy time to mix?
@nancygregoire48094 жыл бұрын
Lori Hill thanks Lori!!
@mistylowery640011 ай бұрын
After it spends for 4-6 hours. Do you have to add a epoxy to it again?
@MissKissKreations11 ай бұрын
Yes 🙂
@HoneySeesCrafting4 жыл бұрын
Do you have to sand the tumbler first or is the spray paint enough?
@wanjones71415 жыл бұрын
Do you suggest wearing some type of mask when using epoxy and while it is curing?
@MissKissKreations5 жыл бұрын
Wan Jones While using epoxy. Make sure you are in an open room. Or a room with fans blowing out the door. With windows open. Look into wearing a respirator mask.
@laurenisagee4 жыл бұрын
What blue mat are you using on the bottom? Where did you get it?
@hpfan09722 жыл бұрын
How do you keep the epoxy on the top and bottom? I tried last night and the epoxy just drifted away from the top and bottom.
@christinacox13273 жыл бұрын
Can i use the 50 plastic cup from walmart for this
@shawnajobson74092 жыл бұрын
So once done and dry then you do not have to do another thin coat of resin on top of alcohol ink?? I am not adding a decal. I just want to know if it needs a top coat to seal or not
@MissKissKreations2 жыл бұрын
Another thin coat of epoxy wouldn't hurt the tumbler to sealing everything. I would use 10 ML-15ML of epoxy total for the 20ounce tumbler