Beginners Dremel wood carving. How to carve a woodspirit, Part 1.

[@Jeffbambam]

My friend, I just wanted to say thank you ! You inspired my to dust off my old dremel and I have found a new passion to divert my mind from all the bad crap in the world.

[@CarvingFusion]

Awesome thank you

[@jorgegonzalez5098]

Hello my name is Jorge and I’m going to start doing this ,have a car accident now I’m deseable and have a lot of time in my hands so my fist day will be hopefully by Friday,hope my will look good as yours thanks for teaching

[@samanthahandy-walker9983]

This is awesome, you are really talented, with some great wisdom, thank you🙏🏻👍🏻

[@clausmikkelsen3041]

Jordy it's is one of a best Videos to tell how start woodcarving Thanks 😊

[@debbielarkin1378]

ThankYou for all your insight and knowledge!!!! I saw your videos and I couldn't wait to get started!!! I started off by building a down draft table which I also just learned about. I can't wait to get carving!!!

[@CarvingFusion]

Awesome good for you thank u and be safe

[@russelquebedeaux7238]

Jordy, Your videos has given me the confidence to just do it. I was sitting around the house after open heart surgery (triple by-pass) bored to death for the last 4 months. Watching your videos has giving me a place to escape to and not worry about what could happen. Like minded people as you say. I think your a great dude man. Thank you so much for the help, sir! Your very talented and don’t sell yourself short on your ability to teach others. You got what it takes. Thank you Russel Quebedeaux Cajun man

[@CarvingFusion]

Awesome thank u very much and hope ur heart is thumping away

[@davidhill1220]

👍👌thanks again Very entertaining 😁 You make it easy to understand Patricia

[@duenge]

Santa is bringing me a set of Kutzalls......WooHooo

[@gregtjam]

I am watching this later in the evening and want nothing more than to hook up my 4300 with flex shaft and start carving. You are inspirational and it's so awesome watching these. Thank you!

[@CarvingFusion]

Thank u Greg and just go for it

[@Kevo20]

Thank you Jordy, another fantastic tutorial video, hope you are well and please keep them coming.

[@22ceedee]

actualy I think you did an exelent job of explaining for any beginning carver , the benifets and diffrences of carving on the cornner , the flat and the round . for some more experianced carvers it might seem like its over explained . But for the begimmer its just right and thats what this was all about . Great job Jordy , great carving . Keep up the teaching, its very much apreciated !

[@CRamirez-tr9rr]

Your funny bro, your a grate teacher yeah don't ya know though, you have a way of disarming and breaking the ice, I just received my first 2 brand sankenvburrs today but my tool comes by the 14th, its a little bit of a cheapo but I'm hoping it's not too awful bad until I can get a better one, I only paid 19.99 for the one thats should be here by the 14th, dude I ain't been so excited to start actually doing this, I watch your tutorials and I'm addicted already, I stayed up all night watching your videos and polishing up on my drawing , and didn't go to bed till like 3 pm and ready to do it again 😊 thanks for what you do and making it so Much fun .

[@adamlangdon2245]

Love the accent. I got fam in Montreal. Great tutorial, I'm new to the game so you're helping me immensely, I'm down with the coffee too...and I'm from Seattle..🤘🖖👏😁👏

[@markduggan3451]

When it comes to showing how to carve, you are the man. I hope you finished the coffee, you don't want 3 day old. Take care my friend.

[@CarvingFusion]

Yup i did ! Hope u are well mark

[@herbertmosavel4051]

Very proud I started in the middle before watching this tutorial... Thanks Bru... Awesome video

[@rymerptrobertpeters9624]

Jordy, You are helping my hobby SOO MUCH. THANK YOU

[@CarvingFusion]

Thank u too

[@CRamirez-tr9rr]

Imma watch it like 20 times and have fun

[@scotthenry664]

I thank you for showing me a fun out let for my down time. You show how to start a carving and to finish a carving. I'm a reset amputee and needed this . I can't thank you enough for sharing your knowledge of carving with me .

[@CarvingFusion]

Thank u and hope u are well

[@outtadarkness1970]

Jordy, Thank you so much for doing these videos. You have given me the confidence to try my hand at wood carving. I started with a Dremel 7700 (battery powered) and have graduated to a Dremel 4300 with a Flex Shaft. Please keep making these videos!

[@davemi3213]

You explain things fantastically you’re a fine teacher

[@CarvingFusion]

Thanks dave

[@jaytee79]

I started to whittle little people and your big man looks more intimidating to do. But I love watching how passionate you are in teaching. Aloha man, salamat po.

[@CRamirez-tr9rr]

That looks awesome man!

[@jaimelocklear641]

It makes a lot of sense 👍

[@mark10u.k.49]

Thanks Jordy for this one, as always i find your videos are of a great help and informative.

[@CarvingFusion]

Thanks mark

[@CRamirez-tr9rr]

If I tell you which tool I was only able to get will be polite but brutally truthful about how good or bad it truly is, somehow I just feel like I can trust you to lead me the right way as best you can, let me thank you in advance brother, I love your accent man 😂

[@CarvingFusion]

Yes u can tell me

[@markdecker8020]

Very good job I don’t get to carve as much as I would like but to day a piece I thought was ok I redid it and it’s a lot better thank you for your time and help

[@ShaunDOttum]

I drink day old coffee ☕ sometimes its the best

[@rezzzo76]

Great tutorial! Super inspiring! Makes me want to go cut a branch off the tree out back...lol

[@ROBOLOGY.wildcamping]

That’s awesome mate iv just got my first dremel and you have answered a lot of questions I had and helpful tips for a beginner 👍

[@oldman54gw]

Well Jordy,.... i’m on my way to pick up a new flex shaft. True to your word don’t go too deep aye,... so my first flex shaft replacement now I feel like a real wood carver. Thanks Jordy

[@lizakin1274]

Great video Jordy, always nice to have a refresher course. Thank you for all you do for us.

[@CarvingFusion]

Thanks liz

[@iancocksedge3938]

hi jordy. great video as always. it was very helpful. keep up the good work and stay safe.

[@neilfreeman4443]

great teaching as usual good video thks Jordy

[@shaneschmidt3250]

You're pretty good Carver and a teacher thank you

[@NorCalSucculentShop]

Great videos. Love the back to basic videos. Thanks for making them.

[@robinworkman3621]

I'll make a pot of coffee monday,im the only one who drinks it. I will grab a cup everyday for my drive to work.heat it up in the microwave and it's good to go

[@kimsammis84]

Yo jordy these videos are so fantastic keep on carving

[@CarvingFusion]

Thanks kim

[@timmiller4979]

Jody. Good morning. Retired 67 y/o man w zero artistic talent. Love your intro to beginners Give me some ideas on tools etc. will be texing u on a regular bases. Enjoy your Minnesota accent Tim

[@jimrodger5341]

Way to go Jordy 👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@evilevilrick]

Another good teaching vid. Don't worry about sometimes getting cornfused, I been cornfused all my life and I'm still kickin. Hi Jordy.

[@CarvingFusion]

:) thanks rick Hi rick bye rick

[@licatafrederic4676]

Magnifique 😍 beau boulot mec 🤘

[@CarvingFusion]

Thank you

[@michaelantonacci4042]

Thank you for the tutorial i just bought some bits and Dremel and im going to try power carving. It looks really fun.

[@johngoodall7097]

180,000 wood spirits can`t be wrong Jordy,!!! You never tire of them do you? And why should you you love em!!! So do we, Regards Doctor John!!!

[@mesk1oc]

I love the videos man keep them comming..I'm learning alot and finally finding something I'm passionate about. My thing is walking sticks and they are starting to look proportionate and decent . Im still afraid to do the beard and mustache hairs though. You make it look east man.

[@nickblassmann1263]

Great Info. Jordy love your demo. I have the tools just need to get started

[@CarvingFusion]

Awesome and have fun

[@eugeneloza802]

Your doing a great job

[@jimcricket71]

Thankyou Jordy great video

[@djlou4762]

Thanks again Jordy

[@ВладиславДудков-з9ч]

Я на английском не понимаю но вижу работу и движение мысли и работу рук) мне нравится респект

[@Игорьщяращий]

Я тоже

[@liamfinnegan8085]

Great video man! Love that you're lefty like me 👍

[@raynarks]

Scrammy handed. 😊

[@michaelarmstrong5586]

good video jordy

[@Tamara-wp1us]

Best video,

[@mikedelauter904]

Very cool. Hey Jordy, Thanks for doin' these video's. I tried Pencil Work, some Brush and Air Brush Work, and now I am givin' Power Carvin' a go. Gonna be checkin' out your Work as I learn (Y) Thanks again & Merry Christmas to ya

[@raykemry954]

I have a coffee filter I put upside down over the top of my cup. I had a aunt that had to have wood splinters removed from inside .

[@CarvingFusion]

Wow crazy

[@CRamirez-tr9rr]

I live in Arkansas but I'm originally from key West Florida grew up in a very Cuban household and I can tell you that you'd be a hit down in Miami my already friend please let me know what you think about the machine I purchased, ok? I'll send you a picture of it, my first 2 burrs cam😢in today

[@harleycowboy4313]

hi dude ya im from america were i was born dont blame me anyways love messing with wood. love you work ay. we have lots in commin. i fell off roof also. another story for that but thanks for pointers. been watching lots of your videos how to people live chat with you. tried facebook. no luck thanks keep on grinding

[@CarvingFusion]

Thank y U

[@24413759]

Greetings from Wales. Hey Jordy . Love what your doing and how you deliver it. Don’t change a thing. That’s my opinion.😂

[@KennethLapan]

What is running your flexshaft the demel 4000 or something different with foot pedal

[@CarvingFusion]

Dremel 4000 with a on off foot pedal

[@glenmckelvey5952]

Great vid .

[@Jer-Michael]

Hey bud.. please keep making these.. been in tree work for years and few months ago got into this.. any advi

[@francocailing31]

how much the bits of mini drill your using?in peso?

[@bahagngmangyan9513]

Where can i buy that very sharp curving tool... I look at lazada & didn't find it!

[@nancybest21]

I totally drink Dale coffee do you make a big pot the coffee is good for two days

[@mountainviewturning5319]

Great video 👍

[@kevintwitchettold]

Hi Jordy. How are u stopping the drive when u lift off the workpiece?

[@CarvingFusion]

Just let it slow down and stop

[@silentthunder8408]

Hi Just came across your video and thought you may have a solution for me. I carve 1 × 12 pine and poplar. I just had a new problem to address. Carving a tree when due to shrinkage the branch cracked from the trunk and now I have air spaces where the branches separated from the tree... Is there a way to prep the wood so it doesn't shine and cause cracks/separations as my carving takes a 100+ hours to make a tree...

[@CarvingFusion]

All I can really suggest is to carve dry wood then u will know where the cracks are

[@arthrawn76]

Very nice...

[@elainebendall1198]

Hi Jordy from Welsh Elaine xx

[@CarvingFusion]

Hi there

[@mohamedshalaby6642]

Useful lesson Thanks 🌹

[@lisazelenak8873]

Hey thanks for a great video

[@elainebendall1198]

Awesome 👍😘

[@coryswen9996]

Have a preference for wood to carve? Certain tree species? Hard, medium or soft woods?

[@CarvingFusion]

Hey there, soft free wood is the best to learn on, ya Free wood

[@CarvingFusion]

Cedar, basswood, cotton wood bark,

[@coryswen9996]

@@CarvingFusion Appreciate the quick reply. I have a ton of free wood in our woods to at least practice on. Mostly walnut though. Thanks again. Look forward to watching more of your videos.

[@davidgoldsmith8371]

Just getting started with Dremel Carving and have a 4000 and Flex shaft. Getting Kutzall agressive burrs. I LOVE THIS VIDEO!!!! And the coffee. I've subscribed and am eager to learn. What is your source for the western red cedar? Thank you so very much!!!!!!

[@CarvingFusion]

Awesome

[@joshuamccreary9279]

So your running at 35k rpms?

[@Bleedspurple]

Im just wondering how long have you been doing this because you make it look just so easy i want to do this so bad

[@kerryedwards8281]

Where is part 2 please?

[@joshuamccreary9279]

What speed are you running your flame bit on?

[@CarvingFusion]

Full throttle

[@kaia.krusmann4206]

nice video thx

[@CarvingFusion]

Ty

[@dannygude]

Where do you buy that bit for carving?

[@CarvingFusion]

Kutzall .com

[@chrisr.1803]

Everybody needs a little fiber! 😉

[@lisabaker1796]

Your inspiring. Is your Mom JC?.

[@CarvingFusion]

Ty, jc? No

[@billevans6876]

How to carve a dragon with dermal tools

[@raykemry954]

Tried to carve wood again and I stabbed myself in the leg. I was poking the outline with a knife when the dowel I was gouging rolled and stabbed myself into me leg I knew it was deep and I saw the knife pulsing as it stood alone in my leg , yup freaked out and pulled it out. Shoot shit dern piss that hurt.

[@Repent702]

You do know they make special gloves so you don't screw up your hands ? Their only a few bucks 😊 take care.

[@CarvingFusion]

Ohh ya?? Lol maybe u have never carved with a dremel before

[@katicafratric8306]

👍❤️

[@MindaugasPetka]

Wauu

[@griffinswoodworks]

Crazy wood carvers unite :)

[@caneycreekwoodcarver]

Jordy great videos very informative. Can you do a faveror, you over talk about the nose way to much by over infasize about the nose sticking out. Just my opinion not mention to hurt anyone's feelings

[@TyasStark]

You'll soon be 100% wood chips haha. great video Jordy :)

[@mylastnerve138]

I drink what's in the pot 😉

[@adrienbastarache8096]

You can't build a bird house off a 4x4 piece of lumber, are you drunk ?

[@CarvingFusion]

Yup u sure can and no sorry I don't drink

[@BassHeadsProduction]

hey i just got a new dremel 4000 with flexshaft and the same bit you are using, and it seems to overheat very quickly, slow down a bit and emit a burning smell- sometimes only after like 10-15 min of use, is this normal? thanks , great video btw

[@CarvingFusion]

Hey there, what do u mean is burning?

[@BassHeadsProduction]

@@CarvingFusion burning smell

[@CarvingFusion]

@@BassHeadsProduction but what is burning? The dremel it self?

[@CarvingFusion]

U can Chek the brushes, lightly sand them flat and ree instal them, If this does not work I would take the dremel back and get another

[@BassHeadsProduction]

@@CarvingFusion yeah seems like the motor on unit itself starts to overheat and then emits a “burning” smell.. never seen it smoke or actually catch fire and burn