How to Wood spirit carving with Foredom-Dremel-Kutzall wood-cuban laurel oak

BUY ME A COFFE ☕️
buymeacoffee.c...
Thank you for watching. 🙏
kutzall.com/?a...
USE CODE: CARVINGAS to save 5% on burs and disks
Extreme bit: kutzall.com/co...
Taper-burr: kutzall.com/co...
Taper-burr: kutzall.com/co...
Taper-burr: kutzall.com/co...
Sphere-burr: kutzall.com/co...
Cylinder-burr: kutzall.com/co...
Original flame burr: kutzall.com/co...
Original Dove tail burr:kutzall.com/co...
Original Root Saw Burr:kutzall.com/co...
BenQ LED Desk Lamp with Swing Arm: amzn.to/2NwLySP
Diamond bit set https: amzn.to/3fy4USn
amzn.to/2WXwMZS
Rz Dust mask:kutzall.com/co...
Keyless Chuck for Dremel: amzn.to/3Cekj45
Dremel Flex Shaft amzn.to/2DmcFKQ
Dremel 3000: amzn.to/357n5tW
Dremel 4000: amzn.to/3rXpgZS
Foredom tx: amzn.to/3bxVMdh
Foredom Speed controll: amzn.to/2GnaPLl
Handpiece, No.28, Tapered, w/ 1/8in. & 3/32in. Collets - H-28: amzn.to/3qKmAOI
Central Machinery 2 HP Industrial 5 Micron Dust Collector: amzn.to/2DwfRnT
Dremel High Speed Steel Cutter : amzn.to/3veVSQE
Carbide Burr Set : amzn.to/38bqPfm
Abrasive 4 Roll Multi Pack : amzn.to/3b7EoxL
Painting Brushes, 20pcs : amzn.to/392Zb32
Watco Rust-Oleum Danish Oil Wood Finish: amzn.to/35gWY2J
Watco Danish Oil Wood Finish Black Walnut: amzn.to/38lQK3S
Undrilled Imitated Pearl Acrylic Beads: amzn.to/3s2Iopk
Minwax Tung Oil: amzn.to/3tuq2OY
Rit DyeMore Liquid Dye, Racing Red: amzn.to/3rVDuKb
Colwood Woodburner: amzn.to/2P3EhXU
If You Like To Support Me. 👇
www.paypal.com...
Wood: Laurel Oak
#CarvingandSuch
How to Wood spirit carving with Foredom-Dremel-Kutzall

[@tennwalt]

You are an inspiration to me sir, I'm a 66 year old one armed ex coal miner and I've always loved woodworking, log benches, stools, tables, walking sticks wood spirit bird houses. I love trying to do what you do, I have a chinese fordom lol but my problem with both the dremel and fordom knock off is that I'm left handed and the burrs want to run away with me, I just found one with fwd and reverse and believe that will fix my problwm. Thank you so much for sharing your genius with us!

[@carvingandsuch]

Great to hear you enjoy woodwork and carving. If the bits jumps try to adjust your grip and also less pressure. usually if i hold the hand piece like a pencil it’s jumps often. Few years ago I had an accident since that I only using small carving tools 😁Happy carving and thank you for watching 👍

[@Steve-B58]

Brilliant.I bought a Dremel in lock down to try this type of carving and owls but gave up because they never looked anything like that

[@rigamble]

Nice work ! Great details !

[@antonello35171]

Bravo, bravo, bravo Complimenti, lavoro bellissimo Saluti dall'Italia

[@michaellafleur2077]

Lajos you know I love your style and details, I just love the way you do eye's I've been working on your technic getting closer lol! I went back to your eye carving video's can't tell you how many times I watched them but I'm glad you have made all theses video's it's a great reference library for sure. Thanks again for making them. Catch ya on the next one.

[@lbeasley586]

Very nice wood spirits you did there first time I seen it done like that it would be nice if you could explain why you're going along but if not that's okay I can catch on I have been watching another Carver for like 2 years now but I like the way you do your wood spirits

[@Wherethewindblows524]

Thanks ❤❤

[@ernestobatungbuhay9769]

I love the details of this wood spirit. Sir, what type of burr you used for detailing if you don't mind. Thanks

[@carvingandsuch]

Please Check description I believe it’s all there. Thank you

[@debo0757]

Old 64 yr old just starting my carving journey and YOU R AWESOME... REALLY APPRECIATE DREMEL INFO AS I USE THIS TOO

[@carvingandsuch]

Never to late to start, if you have some questions my email in the description thx .👋

[@debo0757]

@@carvingandsuch AWRSOME, I AM LOVING IT & WATCHING YOU

[@Мишкакосолапый-ф2м]

Прекрасно!

[@lizakin1274]

Amazing work!!! I love watching your videos. Thank you

[@tonerastrillo8973]

Eres cojonudo. Un artista. Saludos

[@DanDDirges]

Incredible how creates these stunning works of art so fast!

[@3Blindspot3]

Dude, I love your work it’s so awesome. I really want to start doing Thank you so much for passing down the knowledge I really appreciate it. Very inspiring.

[@carvingandsuch]

Glad you like them. I appreciate your support. Have you started yet?

[@garysheahan3883]

You never cease to amaze me! Very inspiring.

[@hughtempleton8640]

Thank you for sharing your amazing talent 😀

[@andynicholls9492]

Hi, I was wondering what you use to seal your wood carvings. Is wax oil any good? Amazing carvings by the way. and love the detail. You make it look so simple. I've been doing knife carvings for some time, but I'm investing in a Dremel 4250 as I have problems with aching fingers. Probably an age thing. I just hope I'm making the right move as using a Dremel is a whole new ball game to me. I love watching your videos. Keep recording and I'll keep watching. Amazing!

[@carvingandsuch]

Hi welcome to power carving. I use clear or dark danish oil. Whole new ideas will borne believe me just practice. Let me know if you need help 👍

[@andynicholls9492]

Thanks for the info, Cheers mate 😄

[@DeeFieret]

This one is my favorite so far.

[@Mifurgo299]

👏👏👏👏 impresionante, gracias por enseñar tu arte, un saludo desde Girona (España)

[@carvingandsuch]

Thank you 🙏 hello from Florida ☀️👋

[@icculus7989]

Now this is my speed man...got my head bobbin and everything. My dude you have to be a phish fan for sure! Definitely The Dead!

[@hastalaultima]

Hola maestro!😊 Encantado de ver sus videos, y me dio curiosidad que liquido usa para darle ese tono final que queda hermoso. Bendiciones 👏😊

[@carvingandsuch]

I use mostly danish or tung oil. Thank you.

[@carminvillarroel213]

Muy bello trabajo

[@juanmanuelrodriguezjimenez9721]

Sorry sr , how much revolutions working your dremmel please

[@carvingandsuch]

Around 20-25 rpm

[@thomasapolito984]

That is absolutly awesome would look nice on a walking stick 👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏

[@michaelvigh926]

WHERE IS HIS DAMN EARS!.... JUST KIDDIN...THANKS FIR TAKING THE TIME.😛

[@carvingandsuch]

😂😂

[@peteypete3597]

How about a female wood spirit? That would be a challenge!

[@carvingandsuch]

Good idea 👍

[@petepeterman1255]

This was my favorite wood spit it so far. I loved that you used a larger piece of wood making it easier to see detail.

[@carvingandsuch]

Thank you very much!

[@77MyEsha]

Amazing work. Ive just bought myself a dremel and found an interesting piece of wood that would suit itself well to making a wood spirit, and your video has inspired me to have a ho. I don't have the shaft extension, but would you recommend it as being easier to work with than the dremel itself? Also what are you painting the wood with afterwards, is it some kind of varnish? Thanks

[@carvingandsuch]

Definitely you will need the flex shaft for your dremel. Much better control. Also dust mask.For the finish coat I love to use teak oil. Two light coats. If you have any questions just drop me an email. [e-mail] thx

[@77MyEsha]

@@carvingandsuch Thanks for this. As it happens I went ahead and ordered a flex shaft which arrived this morning. Looking forward to having a go.

[@СергейДовгань]

Very Beautiful !!! Thank you !!! :) :) :)

[@carvingandsuch]

Many thanks!!

[@77MyEsha]

Just got to say, I've looked at many wood carver's on KZbin looking for inspiration, and I've yet to find one who's better than you. Thank you for your very interesting, beautiful and inspiring videos ❤

[@carvingandsuch]

Wow, thank you for your kind comment, I appreciate it 🙏🙏🙏 🌹🌸🌺🌷🌼

[@77MyEsha]

@@carvingandsuch You are very welcome. I've Subscribed. Keep the videos coming 👍👏❤️

[@liranhadad9258]

Beautiful. What type of dremel tool u use?

[@carvingandsuch]

Model 3000 and 4000. Both works great. Thx

[@chucknowakowski6676]

In the beginning is that just a ceramic grinder?

[@carvingandsuch]

Kutzall taper bit corse.

[@DavidGrassSr]

As always... Great carving, thanks for helping us, See Ya

[@CarlosAlberto-ow9ys]

👍🇧🇷👍

[@robertoscapinscapin715]

😮Show...

[@terrypach1664]

JAIME

[@gero84lin]

❤

[@davideilers3176]

I absolutely love how you make these pieces of wood come to life right before our eyes. Simply awesome!, would love to know what bits you use around the eyes and for your fine lines throughout the face.

[@carvingandsuch]

I using diamond set 1/8 shaft. The first bit from right and the 4th. Those two my favorite ones. Thx www.amazon.com/gp/product/B000MOI9G6/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B000MOI9G6&linkCode=as2&tag=carvingands09-20&linkId=dedcd0a387fcbbfca938b098d74bbae8

[@davidstokes925]

Your work is awesome, all the fine lines and wrinkles you add. 35 years as a cabinet maker and always wanted to try this. Thanks for some inspiration. Couple of questions; what size Dremel are you using and what are you using for your vacuum system. Thanks my friend!

[@bunnymanalo8549]

Nice

[@gandomkouhkan]

❤❤

[@Kagan-1-Khan]

Как называеться лак и где можно достать,купит?

[@jefferyhines6067]

Love your video, I am just starting out, would like to know the different types of bits you used,thanks again for the videos

[@carvingandsuch]

Here they are How I Use My Favorite Bits with Dremel kzbin.info/www/bejne/qmOvnZyneNiMiKM

[@garylove117]

What size taper bit are you using and where did you get it? Also could you please list the size and types of bits you use……Thanks in advance. Love your videos.

[@carvingandsuch]

Hi. I believe everything I using are in the description. Thank you

[@pdrake458]

Looks great!! What burr did you use for the detail on the beard? It almost looks like it was done with a Vcut chisel!

[@carvingandsuch]

I used the bits from the right end amzn.to/38bqPfm

[@daviddooley2230]

I suffer with my mental health .carving helps and I want to be good at it.although I'm shit at it .I watch your videos all the time your amazing . Teach me step by step .

[@carvingandsuch]

I pretty sure you can make some carvings no need to be super fancy but special for you. Because that’s your work.Let me know if you need help just write me an email. Thx

[@miguelcortez8011]

Hola que tipo de fresa utiliza

[@carvingandsuch]

Dremel 3000 4000 and foredom tx . Kutzall bits and carbide ones. Diamond bits for details. All in the description i you want to check them out

[@richardhoffman9729]

I wish you would identify the type of wood you are working on in the beginning of each video.

[@carvingandsuch]

Cuban laurel oak 😉

[@richardhoffman9729]

Thank you, but I don't think we have that type of Oak Tree here in Florida.@@carvingandsuch

[@carvingandsuch]

I live in Florida 😊

[@jonhelgason1813]

Where can i find a bit like that?

[@carvingandsuch]

Check out my description. All there 👍

[@diygarden322]

💖💖💖

[@aiki3do]

excellent.......I carve with mallet and chisel.....your work is wonderful

[@carvingandsuch]

Thank you

[@DaemonRicks]

My favorite carving channel! Just have to imitate what is done here to learn because the creations shown here are beautifull!

[@carvingandsuch]

Thanks so much 😊

[@drmenneske401]

Que tipo de mototool usas?

[@carvingandsuch]

Dremel 4000 and foredom tx

[@halhensler2699]

What type of fine detail burrs do you use? And, who makes them?

[@carvingandsuch]

Best detail bits what I like to use are diamonds. www.amazon.com/gp/product/B000MOI9G6/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B000MOI9G6&linkCode=as2&tag=carvingands09-20&linkId=dedcd0a387fcbbfca938b098d74bbae8

[@igordiogenesbezerra1227]

Lindo trabalho! Qual é broca, ponteira que você usa?

[@artdaedelow8108]

How long did you carve to get to the point you could the one I just watched?

[@carvingandsuch]

Stared around 4 years ago. Thx

[@rockybosarge]

Another great carving. What two colors of stain did you use? Thanks for sharing your great talent.

[@carvingandsuch]

Clear and dark danish oil . Thank you

[@silvafox8371]

You made this look so so easy 😊 - i know it isnt lol my rotary tool is on order - cant wait to get started

[@carvingandsuch]

That’s great to hear. Keep the dust flying 😉 thx

[@yayouratel9430]

The taper burr you use are juste coase or extreme coase ? Thanx a lot men such a good work

[@carvingandsuch]

Course. Not a fan of the extreme ones. Thx👍

[@IMAGENESARGENTINA]

Una obra fantastica!!!! que madera utilizaste? y cuales me recomendas para tallar con dremel?

[@carvingandsuch]

This one is a cuban laurel oak. You can try cotton bark wood , poplar, or cedar. I like those. Thx

[@tehgiestone6031]

Badass man keep them comin

[@armago55]

Hi. Great video. What wood you're using?

[@carvingandsuch]

Cuban laurel oak. Thx

[@DonaConrad]

Love this!

[@jeffsteiert418]

What Dremel is this? I’ve been carving with a chisel set but this would make life a lot easier

[@carvingandsuch]

Dremel 4000 with a flexible shaft

[@jeffsteiert418]

Thanks. One more question about bits. Does any sizing vary for different Dremels? Or if I got the 4000 flex shaft with some kutzall bits/burrs will they fit right in?

[@carvingandsuch]

If you got the 4000 the Dremel flex will fit. Get the 1/8 size bits and don’t go over that. Dremel won’t handle that. 1/8 will fit perfectly.

[@jeffsteiert418]

Thanks a lot happy holidays

[@carvingandsuch]

Happy holidays

[@ThaiMassageToYouMilford]

Wow! Just WOW!!!

[@carvingandsuch]

Thank you 😊

[@gregsewell0]

Very nice! That must be some very soft wood.

[@carvingandsuch]

Medium soft.l but kutzall bits take care of it 😉thx 🙏

[@manojk2391]

❤nice work

[@carvingandsuch]

Thank you! 😊

[@arnaldofabeni3972]

Nice. Very nice.

[@mrjawmaster5854]

AMAZING!!!!!!

[@chrisburnettskip7439]

Wicked work great detail

[@rogerkaufman4685]

Very Cool!

[@carvingandsuch]

Thank you

[@DonaConrad]

SO AWESOME!

[@carvingandsuch]

Glad you think so!

[@lozroberts632]

What do you use at the end to smooth off all flappy bits

[@carvingandsuch]

sandpaper or scotch brittle pad with a mandrel . Works pretty well

[@mikeschmidt5115]

Awesome

[@carvingandsuch]

Thank you 🙏

[@giuseppeciancio3484]

Bellissimo come sempre top

[@ИЗЮМИНКА-ы9у]

ГЕНИАЛЬНО. 💞

[@carvingandsuch]

Thank you 🙏

[@grassyknoll4702]

magnificent

[@rong6994]

I enjoy watching your videos and style

[@carvingandsuch]

I appreciate that!

[@ParkBuffer65]

Thanks a lot for your videos! They help me learn how to work as an engraver! I know how to carve wood with a chainsaw, but I started using an engraver quite recently!👋

[@carvingandsuch]

Great to hear! I wish I could try chainsaw carving but I have nothing to start with and where I live that’s almost impossible.

[@ParkBuffer65]

@@carvingandsuch Yes, I agree, working with a chainsaw requires solving some problems!) I live in the city, in an apartment building, and in order to cut with a chainsaw, I first need to load four chainsaws and a tool box into the car, then drive off to a place where I can cut with a chainsaw, and after work I load everything back into the car and bring it to the apartment !😄

[@carvingandsuch]

Yeah that’s a lots of hassle especially if you just wanna learn.

[@karenheaverlo6454]

So amazing ✌🏼😎

[@Kagan-1-Khan]

Здьраствуйте! Что наносится перед лакировкой?

[@carvingandsuch]

Tung oil

[@keithsmith7229]

love the carving and the music

[@carvingandsuch]

Thx 🙏

[@DataDiggerDon]

Very relaxing to watch you create this wonderful carving 😊 thanks 🙏

[@carvingandsuch]

Thank you very much!

[@DataDiggerDon]

@@carvingandsuch You’re very welcome 😉

[@marcocaddeo3144]

Complimenti !!

[@ivanbrunidj]

Che punte utilizzi ?

[@carvingandsuch]

Check out the description, I think it’s all there. Thx 👍

[@carvinlambert6899]

Very good sir.. nicely done.

[@carvingandsuch]

Thank you kindly

[@MultiTom1956]

Lajos, 👏👏👏👏WOW!!

[@cornflakeusa]

Well done. Thanks for the video.

[@carvingandsuch]

Thanks for watching!

[@edgybob1]

Outstanding!

[@carvingandsuch]

Thank you kindly!

[@marknettles]

Very cool! What did you stain this one with?

[@carvingandsuch]

First coat is clear tung oil. Wasn’t happy with it so i did the second coat with dark danish oil. Thank you

[@marknettles]

Thanks for your response, brother. I love your work and your channel!

[@denispesternikov8257]

Однозначно лайк ,золотые руки на канал наткнулся случайно очень рад что нашел его

[@carvingandsuch]

Thank you so much 🙏

[@БогданЛосюк-ъ8щ]

👍

[@Kagan-1-Khan]

Как называеться лак и где можно достать,купит?

[@carvingandsuch]

Tung oil

[@Kagan-1-Khan]

@@carvingandsuch сізде барма алып кетейін барып.

[@jarmstrong2843]

Outstanding!

[@carvingandsuch]

Thank you kindly!

[@humbertomiguelsacchi7164]

Excelente !!!! un genio

[@carvingandsuch]

Thank you 🙏

[@blackhorse2947]

Great Demonstration

[@carvingandsuch]

Glad you like it. Thx

[@ccarbe3878]

Incredible

[@carvingandsuch]

Thank you so much

[@rngriff1]

Very cool!

[@carvingandsuch]

Thank you 🙏

[@franksadventures4you]

Awesome detail

[@carvingandsuch]

Glad you think so!

[@jamesrankin9833]

Good stuff

[@carvingandsuch]

Glad you enjoyed

[@1776adb]

Power carving is a no skill way.

[@carvingandsuch]

Really? That’s great to hear 🙏👍

[@micahdavis214]

Grammer is your no skill way

[@jklaxon]

Whats is The name of wood?

[@carvingandsuch]

Cuban laurel oak

[@jklaxon]

@@carvingandsuch Hi, I don't think I'll find it here... but it could be pine?

[@carvingandsuch]

Pine is the worst to power carve. Find some poplar or cedar instead

[@jklaxon]

@@carvingandsuch hi..thanks for this...I'm going to try.. your works are beautiful

[@milkyblendersmoothie1305]

Lali te vagy a Király

[@carvingandsuch]

Köszönöm. Jok a videok amiket csinalsz👍