As a fellow technician I seriously appreciate you linking all your tools so I can fill my drawers hehe
@2cells1pack Жыл бұрын
:) more tools the better right ?
@Blox117 Жыл бұрын
i dont have this wheel but thanks for making high quality visual guides for the euc community
@2cells1pack Жыл бұрын
i noticed that there weren't any, so this was one of the founding goals of the channel.
@Onelastrun Жыл бұрын
Oh man oh man oh man! Thank you sooo much for this video! And the bonus how to upgrade your bearing! Icing on the cake! I shared this video wherever I thought ppl would take notice! My bearing hasn't gone bad yet but I believe I will do this project before the end of summer! If not needed before hand! You two rock! I couldn't be more pleased with this video! Gonna go out and get my tools next week and work on the wheel! Super excited!
@2cells1pack Жыл бұрын
The bearing seal is a preventative. If your bearings are bad, then you'll need to replace them
@Onelastrun Жыл бұрын
@@2cells1pack right! Don't believe they are bad. But this would be a good project to expand the life of my wheel!
@nicogyro7525 Жыл бұрын
Great video, thank you so much for your work
@2cells1pack Жыл бұрын
Thanks
@aLexBeGGy9 ай бұрын
Great video. But, where is the actual tire change tho LOL? I wanted to see how you remove it without damaging the rim :(
@JacksonHorton17 күн бұрын
Same. Clickbait advertisment for an item no one sells
@Blox117 Жыл бұрын
bearing seals are so important especially on smaller wheels. dirt will tend to get in and make audible noise after as little as a few hundred miles
@2cells1pack Жыл бұрын
its quite a quick process. especially with a little water, bearings go bad quickly.
@dirt.surfer Жыл бұрын
Yeah, and that seal addition is dam great idea
@electricunipsycho Жыл бұрын
Very helpful. Thankyou. I need to grease my bearings, they are squeeking bad after riding in the rain 1 time
@2cells1pack Жыл бұрын
You will also need to check the condition of the variants. If rust has started pitting in your bearings, then it's better to replace them. The grease will not stop the rust
@electricunipsycho Жыл бұрын
@@2cells1pack do you have a bearing change video?
@2cells1pack Жыл бұрын
I don't, but i believe Roger Hajali released one for a Master.
@Onelastrun Жыл бұрын
@2cells1pack you explain things the best in my opinion! Completely comprehensive! Gotta make this channel the 1 stop shop! You keep doing what your doing, we won't need another euc channel! 😊
@2cells1pack Жыл бұрын
you'll still need the pro-rider reviews like Wrong Way !
@whileistillcan9338 Жыл бұрын
Fantastic tutorial! Thanks for doing this. I have a T4 on order. Switching from V12 HS for the sake of suspension. I hope I'm happy with the change??
@2cells1pack Жыл бұрын
Oh yeah. T4 is a great wheel. Basically a v12 with suspension
@dirt.surfer Жыл бұрын
Good stuff Albert, I enjoy tire change videos 😊 I don't have a t4, however the tire change process seems nice and easy.
@2cells1pack Жыл бұрын
I enjoy watching Albert working on wheels. He is always so detailed and makes the process look so easy. By watching him work, I learned A LOTTTT and I was motivated to do my own Master bearing seal too. 🥰 Hopefully these repair videos will also motivate & support those who want to work on their wheels but just lacking a bit of confidence. - Xtine :)
@dirt.surfer Жыл бұрын
@2cells1pack indeed, I have spoken with Albert on the phone he is very sharp and understands engineering very well. He makes good decisions, in my opinion. This is an exciting time for this technology. I feel as though the current companies are doing alright. It's getting better, but so much of the way these wheels are made things are an afterthought in terms of hardware materials, and the cause is break fix nonsense as well as unnecessary wear and tear. This bearing method is a perfect example of how people like Albert make a difference to the community. It is very clever. Maybe in a few years these companies will follow set standards, and the tech can be taken seriously and become more mainstream. Until it improves, we need Albert's to make our rides better 😃
@Onelastrun Жыл бұрын
@@dirt.surferAlbert for euc engineer! These euc companies would listen to him if they knew what was good for them! Lol😅
@dirt.surfer Жыл бұрын
@cccigic I think that's the problem lol, these companies need an Albert to guide them. Otherwise they well bud light themselves at this rate.
@2cells1pack Жыл бұрын
haha i'm humbled by your opinions :p I'm probably nothing compared to their real engineers.
@TheMoboarder Жыл бұрын
Another top notch video you two! ☮️
@2cells1pack Жыл бұрын
Thanks!
@kjvisual79 ай бұрын
I don't have the wheel yet. But now I am confident that I will be able to protect it from the rain. THANKS for the surprise bonus!!!
@2cells1pack9 ай бұрын
You’re welcome 😊
@euc-mercielago Жыл бұрын
Awesome!
@2cells1pack Жыл бұрын
Thanks!
@SpencerWheelman Жыл бұрын
Liked and subscribed for a precise and accurate video
@2cells1pack Жыл бұрын
Thanks!
@patrickmckowen299923 күн бұрын
Good vid👍 Another reason not to get this wheel. Everyone say the pads suck, no BMS, and poor bearing seals. Cheers
@TheWheelofOz Жыл бұрын
Hi! This is a great video. I am having trouble locating the "grease vent" tool
@2cells1pack Жыл бұрын
Send me an email at 2cells1pack@gmail.com and I can send you the file.
@tanna4750 Жыл бұрын
Awesome! Keep it up !
@2cells1pack Жыл бұрын
thanks!
@stealtherider3008 Жыл бұрын
Good video!
@2cells1pack Жыл бұрын
Thanks!
@richfierro868 Жыл бұрын
Great video! Will we see a commander pro tire change video?
@2cells1pack Жыл бұрын
I dont have access to a commander pro unfortunately. If someone local in Vancouver, BC has one - then i can make a video.
@I2X210 ай бұрын
Wow never thought of using that grease vent/packer. Great vid you guys! Is there a stl file link for the grease vent ?
@2cells1pack10 ай бұрын
Email me at 2cells1pack@gmail.com and I can send you the STL file.
@charlespotokar23753 ай бұрын
Very informative, thank you so much for the video. Did they ever fix that waterproofing on the later batches on the T4? I’m about to buy one and it came out about a year ago? Just wondering if I buy one now, it’ll still be not waterproof when I buy it
@solecycle Жыл бұрын
What great detail and clarity in this video. But it appears that they completely forgot to include the "tire change" chapter in this video. Nothing about tire removal or replacement on the rim was shown. No tips or insight on tire replacement! I'm baffled why they didn't simply label this video as "Begode T4 - Bearing Protection". What a great video for bearing greasing and sealing though!!!
@2cells1pack Жыл бұрын
Sorry, but these videos help people get to the point of a tire change. Sometimes I don't need to do an actual tire change but a different repair. I do these videos so that there is a good guide to get to the point of being able to perform the tire change
@Tattedeuc Жыл бұрын
I wish you made this a month ago my t4 works but not the same
@yb8425 Жыл бұрын
Могли сделать водонепроницаемый коннектор проводов сразу перед головным блоком колеса, чтобы можно было легко менять покрышку не разбирая верхнюю часть
@robertgaravaglia34704 ай бұрын
Bonjour, ou trouver le kit de votre montage, merci. Votre vidéo est très bien réalisée, en France ont ne pas ses pièces.
@Gasper4K11 ай бұрын
Heya, awesome guide. I want to put a bearing seal on my T4, but I have the older version where its a one piece gasket. I am not keen on removing the motor cable because of that. Could I possible take the tire out like how you did at the start of the video, then simply cut the seal so it slots in the cable side, then apply some super glue to glue it back together? Perhaps i can apply the grease slowly instead of using the grease applier ring. Do you think that is viable? Thanks :D
@2cells1pack10 ай бұрын
yea I believe it’s viable. Not as good of a seal - but could still work
@fernandovilares24111 ай бұрын
Pourriez-vous proixainement faire un vidéo sur la MTEN4 POUR CHANGER LE PNEU MERCI D AVANCE 😊
@2cells1pack11 ай бұрын
I will release A2 video soon, however mten4 is very similar
@FEETLE9 ай бұрын
ill take ease of maintenance over engineered premium wheel.
@2cells1pack9 ай бұрын
100%
@TeamBlindMouse9 ай бұрын
so where is the ACTUAL tire change ??!!
@2cells1pack9 ай бұрын
I do these tire change videos to show people wheel specific instructions on how to get to the point of a tire change. In some videos - I am required to do the tire change and therefore will include it in the video. In other instances where I am making the tutorial purely for instructional purposes - I don't need to change the tire and therefore I don't go through those steps.
@DJChrismaz Жыл бұрын
Excellent . Thank you. Do you know if the V4 has sealed bearings ? Or Do I need to sealed them ?
@2cells1pack Жыл бұрын
I'm not sure, haven't taken one apart to find out.
@DJChrismaz Жыл бұрын
@@2cells1pack thanks
@TeamBlindMouse10 ай бұрын
do you have a link to the best off road tire for the T4 ?
@2cells1pack9 ай бұрын
The TOPSTN tire is pretty good, but would require modifications if you have a T4 V1.
@GolfschuleWalterStark8 ай бұрын
Thanks for the explaining Video but where can i order the Begode_T4_QS_Motor_Bearing_seal? Dont know anyone who can make this Bearing seal! Thanks for help!
@2cells1pack8 ай бұрын
Email me 2cells1pack@gmail.com
@eiden9050 Жыл бұрын
Do you have a link to the grease vent? Thanks
@2cells1pack Жыл бұрын
It was designed by a local. Let me see how i can upload and send a link
@2cells1pack Жыл бұрын
Or send me an email 2cells1pack@gmail.com
@thedangleengankle86137 ай бұрын
I have a brand new v3 t4 from ewheels, it has 70 miles on it. How long do you suppose the stock bearings will last? I don't normally ride in rain.
@2cells1pack7 ай бұрын
The newer crop of wheels don’t have as much bearing issues as they are now sealed
@JaradVonNguyen8 ай бұрын
Would you sell those 3d printed pieces?
@2cells1pack8 ай бұрын
I have the files if you want to print it yourself.
@EUCme2 ай бұрын
I just noticed, your wheel doesn't have the orange on the rim, why?😊
@2cells1pack2 ай бұрын
The T4 came in silver rim. T4 Pro came in green rim. I don't believe there was an orange rim T4?
@EUCme2 ай бұрын
@2cells1pack I'm an idiot fascinated by EUCs. Waiting for my Extreme. Even though the information was right in front of me, I thought this was an Extreme. A delusion on my part; my apologies.
@2cells1pack2 ай бұрын
Ah! no worries.
@choosetherightify Жыл бұрын
Do you know if this seal, or another that may be available, can be used on the Commander Pro?
@2cells1pack Жыл бұрын
The dimensions may be slightly off. Need to modify it slightly by chance
@GenZyannd Жыл бұрын
dont you wish this is done by the manufacturer at the factory, not the end user?
@2cells1pack Жыл бұрын
In an ideal world yes, but there's always tradeoffs
@Onelastrun Жыл бұрын
Hopefully soon my friend. Hopefully soon
@2cells1pack Жыл бұрын
the ones that have been done by factory so far ( Sherman S / Patton / S22 / EX30 ) most of them exhibit typical squeaks when riding due to seal rubbing on axle. Consumers may not like the squeals as it gives off a perception of lack of quality.
@Onelastrun Жыл бұрын
@2cells1pack o.i.c.! Hopefully they will do something to make them sound more well put together. So will the squeaking occurr with the bearing cap from this video?
@2cells1pack Жыл бұрын
It does have the potential to squeak yes.
@Ingothnia Жыл бұрын
Everytime I watch a Begode teardown video, I just find more reasons to stay away from them. Why would they not just spend a few extra bucks to seal the bearings from water? Makes you wonder what other corners they are still cutting in 2023.
@2cells1pack Жыл бұрын
Baby steps. Seals have their issues also (squeaking)
@ROMEODICE2577 ай бұрын
what's up wit the music bro?
@2cells1pack7 ай бұрын
I guess next time I won’t put music
@ElectricSentinel-dn8de Жыл бұрын
I feel like the extra bearing grease is unnecessary as there is already an existing bearing gasket to prevent water and dust from entering. Are there any videos showing the damaged bearings?
@JacksonHorton17 күн бұрын
A 20 minute video talking about a tire and bearing change that somehow manages to not show either... Thanks for the waste of time