Just discovered these tutorials lately on wireless router connection, especially when I also have a similar ASUS router. Very helpful in learning and application. Thank you so much, I love your tutorials.
@chuckwilkins35815 жыл бұрын
Thank-You again for a well edited video and step by step configuration process. Thanks to you I have my very old Linksys WRT54GS router up and running as a 4 port switch and with a wireless network. I am going to use this device as an IOT connection for Arduino boards. I will now be able to create and connect wired and wireless Arduino devices. You have a great skill for teaching and your videos rival some that Cisco Systems tries to pawn off as training videos.
@Behfor5 жыл бұрын
Thank you so much for your comment! That's very good to hear these videos were useful for you and you liked them! It definitely motivates me to make better content for this channel! Awesome!! Thanks again :-)
@adriansyahtasman13513 жыл бұрын
It works! Very helpful, Thanks a lot Bro.. Just to be honest, after many tutorial videos.. in fact, it was your tutorial that works properly.. without reducing my gratitude for tutorial videos from other youtubers Your explanation is so simple with interesting animations, so it's easy to understand Once again, bunch of thanks Brother.. Hopefully you and your family always be healthy
@Behfor3 жыл бұрын
Thanks you so much! I'm glad this video was helpful for you. Wish you all the best as well 😀👍
@tajinderpsingh5 жыл бұрын
Your video has been helpful and worked fine for WRT160N. Now I have flashed Netgear R6300V2 using DD-WRT v3.0-r39960M kongac (06/18/19) and tried to setup as a repeater. However only wired devices connected to it are working. The wireless access points on 5Ghz and 2.4GHz network failed to connect with "Incorrect password". I have tried disabling the wireless security, but still no connection. It is possible I am doing something wrong. I have also tried disabling the physical connection on 2.4GHz.
@lukewilhelm3564 жыл бұрын
I'm 1:25 in and excited to see how this goes because I'm literally work with the same exact routers
@lukewilhelm3564 жыл бұрын
Went and set it up in the repeater bridge mode like the other video. Got wifi in my pole barn now. Thank you
@tbirdracefan Жыл бұрын
I saved this video as I think it will solve a problem I am having. Currently getting internet with a Mobley that has no ethernet port. I bought an ASUS router thinking I could simply connect to the Mobley wirelessly. The ASUS router I bought does not support wireless repeater mode though. It looks like I can flash my router with DD-WRT and get repeater mode out of the router after all.
@imrancader74303 жыл бұрын
Bravo!!!.. Finally, repeater works for Linksys E1200. Thanks bro...
@Behfor3 жыл бұрын
Glad to hear that, thanks 😀👍
@joeniemand52755 жыл бұрын
I'm loving your style and thoroughness. I get confused at 5:13 your network configuration still has the bridged option. From your previous videos I understand why the repeater is used and not repeater bridge, I just don't understand why the repeater only option still has network configuration of bridged.
@MrVipulLal2 жыл бұрын
Clear and well explained. Thanks for the video
@Behfor2 жыл бұрын
You're very welcome! Glad you liked it 🙂
@hutchinsonirrigation3 жыл бұрын
Great video. I want to use this in my rv, which means the host will change at each site. After I do this, will I be able to go backinto settings and change the settings to the new wifi network?
@levych Жыл бұрын
the best explained!
@Behfor Жыл бұрын
Glad you liked it, thanks.
@ucup333 жыл бұрын
thank you, simple explanation even for 2021
@RaulGonzalezG4 жыл бұрын
Hello Behfor, thanks for your work doing the video. I followed all the steps for the repeater and repeater bridge configuration and have the same problem: once the second wifi network is working the first wifi network speed decays to 0.5 - 1 mbps and the second is similar. My second router is a Buffalo router that already came with dd wrt. The only thing that I didn't applied is to change the subnet mask in the second network because I don´t know what numbers can I input there. Currently is the same as the primary wifi: 255.255.255.0 Hope you can help me with some ideas to resolve this. Kind regards.
@Behfor4 жыл бұрын
Hi Raul, if the problem is speed, it could be because of interference, I would make sure the routers are not too close to each other, also i would try different channels for the connection between routers, because the current channel might be congested! PS you don't need to change the subnet. Thanks.
@thien29345 жыл бұрын
Great video until I attempted to set up a Repeater between my R8000 and a DIR890L, both running DD-WRT v3.0-r37305 (10/10/18). As soon as I go to add the Virtual interface after setting up the 5GHz channel as a Repeater, the selections for the Wireless Channel, Channel Width and the Extension Channel disappear. Can I ask you what version did you use? Thanks, I enjoy your contents.
@frab885 жыл бұрын
Maybe I missed something, however, even with the "repeater mode" all the devices in "ROOM-B" are still potentially able to reach devices in "ROOM-A"... unless some kind of "AP isolation" or specific routing rules are already implemented on the primary wi-fi router... am I right?
@Behfor5 жыл бұрын
In the video i actually meant the other way around which is room A cannot access room B! But you're right potentially room B should be able to access room A but based on DD-WRT Wiki page that says "Computers connected to one router can not see computers connected to other routers in Windows Network." I'm not sure if they can, maybe dd-wrt somehow blocks them ! This is something I should test myself. Thanks :-)
@frab885 жыл бұрын
Thanks for the video btw!
@Behfor5 жыл бұрын
You're very welcome :-)
@Saahib_K5 жыл бұрын
You rock. Big thanks for such concise and informative video. Subbed
@KevinMeier08234 жыл бұрын
Love the vid, you da man! Now I got to watch the other one too (repeater bridge) cause I want mine all on the same network
@brothersgta339-jb1ld2 ай бұрын
U used a word "da" which is a tamil word. Are u tamil?
@KevinMeier08232 ай бұрын
@@brothersgta339-jb1ld No I am not Tamil. Da has also been used in English slang to replace 'the' at times. Maybe it was started by some one is Tamil.
@petervalencic54853 жыл бұрын
Thank you.. Clear and easy to understand
@SaiyanNoChaba5 жыл бұрын
Hello, Thanks for the video!! Did you do any configuration to the IP Adress, etc of the second router?
@Behfor5 жыл бұрын
Hi, yeah as you can see in the video you will need to assign a local IP address to the secondary router and it should be on a different subnet than the primary router! Thanks!
@eduardocovarrubias784 жыл бұрын
Hi Behfor, I just upgrade my old linksys E2100L with WRT v3.0 R40559 and the installation was without problems. Now when starting with the configuration over menu Wirelles> Basic Setting > wireless mode does not appear the repeater option. Only show AP, Client, Client Bridge (routed), adhoc, WDS station and finally WDS AP. Could you please help me? what option must be chosen. Thanks in advance
@vladimirljubinovski9043 Жыл бұрын
Hello Behfor, I have the same router Linksys e900 and I setup the router in Repeater Mode like your way. Everything works good, except trying connecting to Wi-Fi after restarting the router. If the power electricity is gone or I manually restart the router after those settings, clients can't connect to the "Room B" Wi-Fi, the network is broadcasted but users can't connect. I find a solution, to go to security wireless settings, disable the security for "Room B" and then enable again, and this is done only thru LAN port. So, summary, on every restart or electricity fail, I have to connect LAN cable and disable/enable Wi-Fi security, its very boring.. Do you have any solution for this issue or any stable version that works good for Repeater Mode with Linksys E900? I'm using v24-44715 K3.x_mega-e900.bin, but the same is happening with K26 mega and nv64k. I'm waiting for your reply! Thank you, King Regards!
@syedjawaid74284 жыл бұрын
Need a little help? I flashed DD-WRT firmware on my Linksys ea6400 router and cascade it with my Arris surfboard, working fine. the only problem has come that the power indicator light on the front panel goes off after rebooting and also WPS button seems to be not working as pressing it, there is no effect on the power light and WPS devices do not connect with this. Any help will be highly appreciated.
@Conhecete4 жыл бұрын
Thank you very much, Behfor!
@train49052 жыл бұрын
Superb sir,very helpfull.thanku for posting
@seoexpertise4 жыл бұрын
I have my main/primary router wired to my secondary, what settings do I need for the secondary router to broadcast the same SSID as the main router without any issue? what kind of bridge would this be >.< Like I want to bring 200mbps ethernet speed downstairs whilst also extending the wireless, I want the SSIDs to stay the same so they don't conflict with each other, is this possible?
@qamartheone5 жыл бұрын
So wat firmware ur currently running for repeater e900 as of today?
@X_B0LT3 жыл бұрын
hi, bro for some reason the 2019 fsofware of my tp link TL-WR1043ND V1 Not have the option of min 5:07 only i have AP , CLIENT , CLIENT BRIDGE (ROUTED), ADHOC, WDS STATION, WDS AP. if u know what option i need to use or if i need dowload another old version pls can help me ?
@AwikMuttaqin4 жыл бұрын
i have problame, here in my area there is isp mikrotik that does't allow repeater, how to fix this issue, if we use WISP we can repeat signal, but other people cant connet his user and password because , WISP make all people use one user that was connected to internet without login page, this is not what repeater i want to use.. can you help me ?
@kaalalong89675 жыл бұрын
At 6:14. The DHCP is enabled for repeater, but the IP address start at 102.168.1.100. Why not 102.168.2.100? Thanks for your videos.
@Behfor5 жыл бұрын
Because the IP address of the router is not changed yet, I mean I haven't saved the configuration yet. After I save the page it should change to the new Ip address.
@kaalalong89675 жыл бұрын
Ok. I see. What about the step where we check “status” and “join” the primary router? Some other videos do that, so I just curious. Thanks
@Behfor5 жыл бұрын
I never had to do that! If everything is configured correctly it should connect automatically
@kaalalong89675 жыл бұрын
Behfor thank you for all your instructional videos.
@Behfor5 жыл бұрын
@@kaalalong8967 you're very welcome!
@LFSFCR5 жыл бұрын
You could do a tutorial on how to configure openvpn in server mode in DDWRT, the tutorials that are there are obsolete.
@huhu67593 жыл бұрын
But sir, I have netgear r7000 I after selecting repeater mode and following the video, my ssid is not broadcasting. I cant find my SSID. whats up?
@xaviermartin51904 жыл бұрын
Hi, any idea why the same wifi security conf works in Repeater Bridge mode and not in Repeater mode ?
@0311geo4 жыл бұрын
thank you, great video!
@Behfor4 жыл бұрын
You're very welcome! Thanks for watching :-)
@tautau22BR4 жыл бұрын
hey i have one problem, my "repeater" use wired conection, but i using repeating wifi + cable like a switch mode, but my wifi not syncronize automatic with my new tp link c6 router, is using my second router wr1043 but wifi lost conection when i go to room 2, its more easy buy a repeatir with one mesh tecnology, but i dont have money now for this and i want to use my old router
@MoeinEsther3 жыл бұрын
what if you want to connect with cable and use different local IP addresses ????
@shaahin28314 жыл бұрын
So my primary router 192.168.10.1 and I'm setting my secondary as 192.168.1.1 to repeat without bridging. Should I leave the Gateway and local DNS as 0.0.0.0?
@Behfor4 жыл бұрын
Yes, just leave the Gateway and Local DNS as 0.0.0.0 and it should work fine :-)
@shaahin28314 жыл бұрын
@@Behfor Thanks a lot. Appreciated. Stay well.
@marcoaurelio69414 жыл бұрын
hey can you name any gigabit ethernet lan ported router that is capable of dd-wrt and/or wds? thanks
@BlaGGah4 жыл бұрын
Just attempted this on my wrt610nv2 and the DHCP is enabled but it's not running so therefore i can't access the net when connected to repeater's own ssid.. Where did i go wrong?
@DerCheckerzeigts5 жыл бұрын
Hey good video. But how can I install dd-wrt on a wlan repeater. Like on this little devices.
@bienflana64194 жыл бұрын
Hi, ive followed your instructions however i still cant connect to the main router. need your assistance
@stonekdotcom3 жыл бұрын
How if you have Room 3, Room 2 shares wifi and Room 1 is far away?
@danielwelsh5 жыл бұрын
Thank you
@Favorites313185 жыл бұрын
Is it possible to connect wireless to the repeater?
@Behfor5 жыл бұрын
Yes that's actually the whole purpose of a repeater, thanks.
@Favorites313185 жыл бұрын
@@Behfor thanks bro. Got it to work. 👍👍👍
@paulosgo5 жыл бұрын
I can't get connect to the main router, i follow your instructions smoothly but in the end i don't have any WAN I.P., can you help me Sir?
@RAMMSTElN5 жыл бұрын
i guess ROOM A means primera router SSID name , maybe here was your mistake
@Darckon4 жыл бұрын
I know this video is old, but if you know how to make IPV6 work, using WRT pls explain me how. I can only make it work in IPv4
@jnabalaa82624 жыл бұрын
Is there any repeaters in the market that support built in vpn?
@atharvabhusari9654 жыл бұрын
Hi. It actuallt worked. But the thing is it stops broadcasting ssid after protecting it with the password. How to solve it.!?
@Behfor4 жыл бұрын
I remember this was a known issue back in the day, I'm not sure if this was ever fixed or not, I can suggest to make sure the latest firmware (which is supported for your router) is installed. In my case rebooting the router usually fixed this issue. Thanks.
@atharvabhusari9654 жыл бұрын
The problem solved after I refered your other video about ddwrt problems and how to install the firmware. It was wrong version of firmware that I was flashing. It is working now. Thanks for making it easy to understand. Thank you.
@mackfc90803 жыл бұрын
good
@Behfor3 жыл бұрын
Thanks
@ariesr48835 жыл бұрын
I can't find the repeater mode it's not on the drop down list... :/
@Behfor5 жыл бұрын
You probably have the Client mode, you can use that instead. Client bridge instead of repeater bridge, client instead of repeater.
@eloisavillena35165 жыл бұрын
Hello i wany to know how can i set up ddwrt on linksys e1200v2
@on-ob4kh4 жыл бұрын
7:17 my WAN IP constantly remains 0.0.0.0 .... what did I do wrong ?
@Kikutuca4 жыл бұрын
I have the same problem. My repeater router wireless connect to the main router, but my wan ip remains 0.0.0.0. so I have not access to internet over repeater.
@robertlazarin92644 жыл бұрын
@@Kikutuca I had the same problem. I fixed it by changing the security mode in the wireless security tab.
@noufalehaab65944 жыл бұрын
The repeater is working on lan but it is not showing its wifi SSID
@jillianfatima27913 жыл бұрын
When I'm putting password on the repeater router, the ssid disappears. Please help
@liamsteinsviknipen36945 жыл бұрын
This dod not work,when typing the password of the physical interface and try to save it just resets to a password with 4 characters...
@rocxbilal11753 жыл бұрын
my router save aplly seting after not show wifi signal
@shaahin28314 жыл бұрын
Damed garm dada 🖐
@ThiagoLobato3 жыл бұрын
Doenst work in NETGEAR WR2000. The SSID isnt even aired.
@ronniewendell36784 жыл бұрын
I followed your instructions step by step, it's not working