Behringer Flow 8 - Stereo IEM Setup on the Behringer Flow 8

[@mikelukshis]

You gave the exact solution to the problem I was having! I'm on tour and using my Flow 8 for the first time as a personal monitor, but only getting the monitor sends in one ear. Thanks!

[@dooshmasta]

Thank you for doing these videos on the Flow 8. This mixer has so much potential and people aren’t aware of it. You bring a lot of credibility to this mixer and it needs more visibility for sure.

[@mark130471]

Hi Drew, thank for your video series. I'm looking to switch from a Tascam Model 12 to the Flow 8 so have been watching your series of videos closely. I would be very interested to learn more about recording acoustic instruments, recording guitar amps via line out(s) and what can be achieved in DAW's with such VST as Toontacks series of plugins.

[@kisaenock1399]

Hi, I,m Enock watching from Uganda, thank you for sharing great info man..... now just like u pluged in a mic in this video, I would so much love to see this mixer being used on stage with instruments and mics plugged in and also to see how one can set up a channel. thanks

[@stephanekiss]

I was hoping I could use this as an audio interface and mixer combo for DJing. Ideally, I would have USB 1-2 master mix from my laptop on the main XLR outputs, and two booth monitors connected to the 1/4" jacks on monitor send 1/2. The booth monitors should play the same signal as the master, but with an adjustable volume (like the control room outs on live mixers). Then I'd like to use the phones jack for USB 3-4, for listening to cues on the other decks without playing them on master or booth monitor. Then, I'd like to bring in 2 other DJs via input 5-6 and 7-8, so that when I'm done playing my set, we can smoothly switch to other DJs without having to unplug / replug, the way you would with a DJ mixer. Is that possible? From the videos it seems that the phones output has to mirror either the main or the monitor, and can't be routed to USB 3-4 without also routing the monitor outs to USB 3-4. It also seems that I might not be able to use 4 USB outputs from the computer at the same time as the 4 line inputs on inputs 5 6 7 8. In terms of hardware it seems like everything is in place, but it would require a firmware update to make this DJ use case possible? Did I get this right?

[@marcellodimanna4392]

grazie. complimenti. congratulazioni

[@gurozawa]

thank you

[@marieelectraviolinist]

Super vidéo

[@jacobsworship]

Thanks for all the Flow8 videos, much appreciated, I'm trying to play my midi keyboard using Mainstage and record using Ableton, whilst using the one Macbook pro and one Focusright, can't seem to find any videos to address this set up

[@tonylucchino1951]

Hi Drew, thank you for the very detailed videos on the Flow 8. My question is.....can I adjust the monitor 1 and 2 to a stereo channel for each. I would like to use these 2 monitors separately for 2 performers where I have a click track on the left and music on the right, each monitor (1 and 2) having this setup. As of now I can only get the click track (left) on each monitor. I tried all configuration with no results.

[@gurunggurung6249]

hello drew,can you make a video to get audio from daw back to flow 8 ? In my case,i wanted to mix all my inputs inside daw and send back to flow 8 and send that audio to seperate audio interface for live streaming. thankyou

[@blahh786]

How would we connect a pedal? If u could please do a tutorial

[@josehiramlopezmoreno]

Thanks for the great content Drew. When I do a monitor link, does this mean that the output of each 1/4 inch will be in Stereo? I did so on my Flow 8, and I still hear the audio only on the Left side of my headphones.

[@kevinfire101]

Can we control effects individually on each input??

[@Lora-m3u2p]

How to connect the mixer to your speaker? It has to be power speaker

[@dreeleung]

Can you make one with recording to a mac?

[@SHAMYxk7]

Is it possible to have a separate mix for phones out and main out? I hope they are still planning to make firmware updates for this and make this possible if its not currently. Like xr12 I think, the phones out can be aux 3 and aux 4

[@TheThreshingRoom]

How to use a talk back mic on flow8

[@davidblickstein]

@Drew, in my trio I do NOT want the two monitor busses linked because I want to do independent mixes for each person. But... I also want to to send ONE of those mixes to my IEMs. This video doesn't show me how to do that. Can you help?

[@JoeNardi]

Is there a way to have the master outs be Mono?

[@TheThreshingRoom]

Is it possible to use a talk back mic on flow 8 while using it live

[@clarkfurlong5154]

Can the main out be mono so you have two outputs?

[@Пробуждение-ь6ш]

how to use eq?

[@indianetusa]

hi we have a x32 producer in our church. also connect one sd 16. the output getting on sd 16 ,but I want to get the local output.please explain how to route the output.

[@petruciucur]

That's it? No more tuts?

[@mikehidalgooficial]

Hello, one question. I connect my headphones to monitor 1 but they can only be heard on 1 side, is that how it works or is there a way for it to sound on both sides?

[@marcellodimanna4392]

come si fa a registrare su di un altro PC ?

[@marcellodimanna4392]

voglio sentire in cuffia la base e la mia voce. nel PC deve arrivare solo la voce e non la base che ascolto nelle cuffie che arriva dall'usb del PC collegato tramite la scheda audio interna del mixer flow 8

[@petruciucur]

Is it possible to use Flow 8 like here kzbin.info/www/bejne/ipfUcomemZloq6s ?

[@hanspeterlutz6586]

Could you at least explanin once what an IEM is? You americans love abbreviations and acronyms not all in the rest of the world know!

[@VideoColServices]

In Ear Monitor, a mix send to musicians earphones so they can hear themselves on stage without using floor speakers.