BEHRINGER X32 / M32 - DANTE CONTROLLER - DANTE VIRTUAL SOUNDCARD

[@HubLocationSound]

Great video. Thanks!

[@fredriccortez6190]

can i add an additional (let's say) midas m32 to the switcher so then assign both console inputs to my DAW?

[@KINETICPROFESSIONALS]

If the m32 has a dante card then yes. In dante controller have the m32 and x32 be transmitters and dvs be the receiver. Select inputs in your daw from dvs accordingly

[@LBenjamin322]

Time to update the firmware to version 4.xx bro. Gives you 1 to 1 routing capabilities.

[@KINETICPROFESSIONALS]

Really? Damn. About time. I actually don't have the x32 anymore..but good to know.

[@LBenjamin322]

@@KINETICPROFESSIONALS yeah man, been out for like a year. I recently updated a few months ago. It’s sweet.

[@colmhinchion1309]

Hey! I’m trying to connect my M32 to a Rio Rack, I have done all the clock settings in the M32 and patched the card to the inputs. And I have set the Rio32-D2 to have the secondary port to daisy-chain. But I’m not seeing the audio coming into the desk. But I’m seeing it in the QL5 and FOH. I only want the M32 to do a live mix to Camera. Do I need a Switcher instead and put the M32 into the Primary Port on the Rio?

[@KINETICPROFESSIONALS]

In Dante controller can you see the m32 Dante card and the rio ? And the Ql5?

[@KINETICPROFESSIONALS]

If not all devices are showing up in Dante controller may be sample rate mismatch , may be ip conflict

[@FernandoOfficial29]

My x32 does not show in the Dante controller and my macbook does not have the green check mark... has anyone come across this issue and how did you fixed it? thank you in advance

[@prenumenumedefamilie3418]

ok what s the difference betwen dante controler and dante virtual sound card !?please let me know if i m geting right !Dante controller is the dante interface (hooking conectivity) and the virtual is a virtual sound card if you do not have another right ??with that so many viirtual in/out 64 i am right !?so that s meen i can use dante controller with other sound card drivers as well i am right ? Please be kind and mark me links to other 2 type of conection that you have promis in this video !daisy chain and redundant so i can watch those too! many thx1

[@KINETICPROFESSIONALS]

Correct! Controller is for patching and management, and dante virtual sound card turns your computer into a virtual dante device (virtual sound card that programs will see the same way as any other sound card)

[@carlphoenix810]

Wandered what your experience was with connecting 2 mixers together via Dante into a DAW? I have an X32 Producer with a Midas DL32 attached via AES50, and an M32 Live that I want to add together for full multi tracking. Id like all available channels if possible, but guessing with the channel 8 block limitation, I should get at least a 60 channel input, while keeping a single 8 channel block aside in say the M32, as output for Ableton Live in theory right? I have tried aggregating both mixers via usb in my Mac, but got mixed results and no full success. Don’t know if I’m doing something wrong there or not? Would love some help with this if you know how to do this? Contact me on messenger if you have a moment to spare please? Cheers! Carl