Beko wm74135w error reading and test mode

[@glodzio3401]

It works also for BEKO WKB 51031 and all others with the same panel look. GREAT JOB and HELP for many people. Thank you man!

[@jefffinch3232]

Fantastic video! I thought my machine was ready for the scrap heap but it’s now as good as new. Thanks

[@Boma3194]

Thanks so much! This worked on my Beko WTK82011W washing machine! It was flashing end light no matter what setting I put it on and wouldn't start. This reset worked and now my machine works as usual! 🙌

[@mrjonnyjones]

Hi Tim, we had the same problem with this exact model. Your initial button press combo worked, however the machine wouldn't go past the error code (E18, which is meant to mean an unbalance load). However we opened the door, closed it, and this (for some reason) allowed us to cycle through the test processes as you showed in this video. So your video has been very helpful, you saved all of the housemates from having to go to the laundrette!

[@abdeltari4365]

God bless you guy !!! you saved me ! my washing machine mas new, impossible to start it !!! was waiting for a technician and ... I found your video !!! Thanks a lot, you restored peacefull in my house !!! BEKO UWM7014RO

[@xxxmickyxxx3]

So glad I found this video. Washing machine wouldnt start and had stopped mid washing. As i went to reset the machine with the first step after the error code e18 appeared and i clicked start nothing would happen. So i opened the drain tube at the bottom corner of the washing machine and also opened the other thing next to it. After draining the water and cleaning the holes, I proceeded with the reset of the machine as shown in the video and it finally worked. Thank you

[@beccywheeler7429]

Thank you so much this just saved us buying a new one 👌

[@needle1742]

You saved the day man !!! Thank you so much for sharing this.

[@bradpinches9134]

Thanks for that. Also works on the WMB 71231.

[@phil9540]

Thanks for this, saved my bacon on a Sunday evening!

[@humbertotrigo3253]

I’ve done this with my Beko.Thank you very much Top Man.GREAT JOB and HELP for many people.

[@yeshua418Q]

Hello I did a factory reset on a below and I only held the start button then turned the dial to cotton it comes up with e18 then I do the same as what you have done in your video u didn't have to hold the spin button. It amazes me how the below program can get mixed up the washer I did a reset on wasn't spinning I did the reset and it worked the spinning. Iv downloaded this video to show my friend when he's washer goes Pete tong

[@jack-yw8qg]

❤ thankypu very helpful

[@lucavasile7804]

Hello. My machine is wmy71033lmb3. In test mode when the water has to be heated nothing happens. Not even the drum spins.That means the heater resistence or ntc sensor is gone?

[@laurencejones2090]

Not sure what my initial error code was (maybe 11) then 067 came up instead of 057. At step 012 - nothing happening. Any ideas please?

[@ArtyomEryomin]

Good, you're testing!

[@diegovd7215]

Hi, the first number '57' could be the software version, I saw that on a different video. Cheers

[@theleaguehgs3111]

My washing machine didn't spin the first time I did the error test run so I did it again and the cycle started but there was spark at the bottom inside of my washing machine just as the cycle started . Should I be worried or just do another test run to be sure its safe ?

[@glennpedrosa5529]

Hi Tim 100. How can I reset/ diagnose my beko 7k washing machine model number wm74125m?

[@RobGaming12]

You the GOAT

[@GaudyDragon8963]

I had the same washing machine as you before and i only had to hold the start button abd turn it to cottons

[@Spicymuffin]

Genius.

[@sameerquader]

Thank you

[@ashvanbro9329]

What a man well explained well shown have you got an email brother

[@mayamaram9825]

مافيا والو

[@spritzyee5417]

Also works on the BWD7541IG

[@wilconnolly8128]

Mine gets to no 012 and just stops. Will not drain even with new pump fitted. Any ideas?

[@washinglad1400]

On these models, you don’t need to hold the spin button, only the start button :)

[@God-is-Gracious.]

Thank you so much... It worked 😀

[@issachuntmm]

Done this didn't get an error code..cant run a test and still won't run?? Any ideas.

[@9vlcko9]

When I get to number 6 its don't spin its just making noise and when I press start button nothing happen. Any idea what its going on and how to fix that?

[@nickneocleous659]

Thank you for that video very helpful but unfortunately when I go for the error codes the motor is not spinning is there any way of checking why their motor is not spinning as I have tested the motor and the motor is working fine

[@iFlowWithTheGo]

Have the same problem. Did you find a solution?

[@darektomas5115]

check motor brushes

[@pawelnosal9888]

hello I need help my beko WDX8543130W not work I check all power and fues is ok look all black

[@markrobertson4956]

I don’t have an error code but it won’t run through the cycle to clear it (help)

[@dubstepah]

Hi Tim I have the same machine, I am getting no power at all, no display when attempting test mode, plug fuse is good. over the last 6 months the machine has slowly taken longer to power on and now will not power on at all, any ideas what to test next?

[@user-tim100]

Would need to see it and 5est components with test equipment

[@MrPoe70]

i have same washer but when i press start it does not do anything any help please

[@adambarnett341]

I did what you did, I have the same model, my error code was EO9, however when I press the start button nothing happens. The display still shows E09.

[@user-tim100]

Think e09 is a door lock problem if u don't fix the error u might not be able to reset the error

[@xxxmickyxxx3]

Same thing happened to me. Although the error code I got is E18. And after I've done the first step and the error code appears when I click start button nothing happens.do you know how you were able to fix this issue

[@cam-whiley3754]

@@xxxmickyxxx3 I'm getting the same thing mate did you fix it? I just keep seeing E18 and have no idea how to reset it

[@blackcarddenmark1846]

I tried this on my wm74165w the error code reads e18 . The problem is the machine doesn’t start or lock

[@Thomas-tgggg]

Brother pls help me... My machine is working.. but it's not drying automatically... When he manually select the spin+ drain mode it will work . What the issue? Automatically it's not spin

[@gabrielleormerwood641]

Hi, my machine only shows E8 code, it will not run through the test mode. I've done everything else suggested, checked all filters too.

[@user-tim100]

E08 is a fill problem would need to see the machine to see why it is not filling

[@mrjonnyjones]

Try opening and closing the door while the error code is on the display. This worked for us 👍🏻

[@nrnmaqsood]

Hi can you help my beko machine strat but in the middle of washing stop and no lights on it like someone switch it off then after hour or two it’s on again but then after 5 10 minutes stop again

[@user-tim100]

Would need to see it to fault find it you could try pluging it in on another socket to eliminate that

[@beng_priv44]

Mine not doing anything after the reset

[@gosis]

#1

[@blerom4736]

Hi, I have the same washing machine done it until the last one where it was supposed to do rinse and drain, but it got filled with water but never drained and its stuck like that now, tried to turn it off and do spin and drain,it says 12 mins but it never stops when it goes to last minute , it keeps going on and on!

[@MrBilbo44uk]

Water level sensor or pressure switch failure.

[@davidtayloruk0001]

still wont spin

[@IloveMelodie3]

1:33 sounds motor inverter no brushed

[@darektomas5115]

display error code 11 and can't do any more test mode.just display e11 and don't jump to next for test

[@user-tim100]

E11 think is a fault on the motor circuit it prop will not go any more through until that is fixed

[@lisathompson2154]

I have this machine and my error was E18 I did exactly as you said and it cleared the error however my washing machine still will not work, so I tried to reset again and now there is no errors and it wont reset

[@MrBilbo44uk]

Because you cleared the error but didn't fix the problem so the machine wont work. You need fix the problem that caused the error then clear the code it will then work

[@Jerry-fg6si]

I have Error code E11, any solutions?

[@James-pe6ym]

Did you solve it. Mines E11 aswell.

[@user-tim100]

E11 is a motor fault

[@shadracka3]

How do you deal with that

[@Jerry-fg6si]

Solved by getting a new machine 😭😂

[@jacqiebrodie8381]

Mine also E11

[@antonyking1494]

Hi my washing machine reads e18 but won't go no further than that, any ideas as to why? Can you help?

[@user-ez1lp7kv5x]

غسالتي نفس الغساله بس تقف عند كلمة اغسل شو الحل وكيف بقدر اعمللها سفت وير او اعادة ضبط مصنع

[@user-qe1ok8xu5t]

من فضلك عندي نفس المشكل مع غسالتي عملتي معاها ايه

[@wondermum9770]

Mine says error E 13 please help.

[@gosis]

#1

[@marcparnell8233]

Error code e17, won't start test 🤷

[@mrjonnyjones]

Try opening and closing the door while the error code is on the display. This worked for us 👍🏻

[@anjumshahzad1409]

I have e 11 error

[@James-pe6ym]

Same, did you sort it?

[@Jorge_dance-cringe]

1300 spin