Beko wmb 7, 8, 9 Series washing machines diagnostic & test mode

Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
Tutorial: www.how-to-repa...
Test mode and Diagnostic for Beko washing machine error codes and fix the fault.
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.c...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
KZbin. / apart4u
Facebook. / how.to.repair.appliances

[@bighit2481]

Brilliant, I had someone look at my machine last night and was told it was in need of £100 worth of bits! Only to see your video, I followed your instructions and everything is now working perfect. 👍🏽

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@dunchall100]

8 years old and still a useful video. Thank you 😊

[@How-to-repair]

Really glad the video helped you. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @dunchall100 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@emmadoherty8692]

Thank you, thank you, so easy to follow and so informative. You have helped save another washing machine from going to the dump. ❤♻️🌎

[@cinderella69er]

Thankyou it worked my machine was stuck in spin and Drain doing these steps reset my machine saved me buying a new one thankyou so so much ❤

Thank you, good sir. Once more, you have helped save another washing machine from going to the dump. Subscribed and liked

[@How-to-repair]

Thanks for the sub! Remember to share it on the timeline as that really does help us. Much appreciated.

[@sulemanomer]

Mine is doing everything apart from rotating, it does make a sound but does not rotate, belt is still on the pulley system

[@gothicangel5629]

Thank you sooooo much I thought I had to buy a new washer but you've saved my life !!! Do you only repair washing machines?

[@nuralam7242]

I joined from Bangladesh you are a excellent engineer. I see your vedio more and more

[@How-to-repair]

I'm glad we could help you. and remember every week we are now doing live streams to assist in any repairs that you have

[@blondiejam924]

So glad I found this video I can now cancel my new Beko washing machine as my old one is fine thanks 👍

[@TheFiesSsta]

Very useful video, it helps. Thank you!

[@How-to-repair]

You're welcome! I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@davidcorro8458]

Wow great video i have same make and model i wrote down everything you showed just in case i have a problem, top man knows his job

[@plaggy7]

worked a treat. Thank you so much

[@How-to-repair]

Really glad it helped you fix your Beko washing machine My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @plaggy7 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@omoleogedengbe3007]

This video is so helpful to me at this moment thank you veeeeeery much.

[@echonicdelta9]

Saved my life 🎉

[@How-to-repair]

I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@pmocko]

Thank you. It works for Beko WMB 71242 too. I had the error code E07. I had unplugged a cable from the pressure pump and then I didn't plugged it in fully. After starting the machine I ended with this fault out. Clearing the error helped. To read the error code you can also hold button 1. and 3. under the display while the machine is turned on. It doesn't clear the error code, but only displays it.

[@ls9bg253]

Hi, I got the error code e18 and the door did not energise for further tests, what should I do now?

[@christinec1965]

I thought my machine was 'done for'. This tutorial has it up and running again. Thank you 🙂

[@gerryclan8]

Im getting an e18 error and after diagnostic mode it wont start the test..any ideas?

[@chrisstewart2398]

We've the same issue with Diagnostic mode, it won't cycle through the tests. Were you able to solve this?

[@ibrahimazawe9405]

Excellent Paul Thank you so much for information....it is so useful. we have BEKO WMB 81243 LRC ? we would ask you 1-we preformed the test and everything was working unless the motor ??? 2- why should check the motor before entering test mode if think have a motor fault ?? thank you so much.

[@harvindersingh5955]

Amazing! Thank you so much. This was excellent, helped us solve problem.

[@clairecooking5880]

Excellent video clear ...found error code 05 ....now to find a video to fix it!!! Thank you

[@tiffineykent3629]

I’ve used this video a few times to reset machine now. Thank you! 😁

[@diana3564]

love this video it has saved me a lot of call outs

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@lancpudn]

Thank you so much for this excellent tutorial video. it cleared the error code & all is well with the machine again.

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@karwanx1995]

how-2-repair.com hi my wash machine is beko the motor is askoll but screen showing code 0417 the motor not spinning can u help me please what to do

[@farzanafa]

You do an amazing job, Thankyou! I was wondering if I am able to use this test on my beko washer dryer WDA914401W? The message, "waiting for cooling" is permanently on the screen when switched on, and will not run any wash cycles.

[@farzanafa]

Hi the machine display is ok, but the drum won't spin, have checked the belt it's fine, just fills with water and drains...any ideas appreciated, am thinking I will have to get rid of it

[@soukainabaysar6427]

Farzana Ahmad

[@robjenkins9450]

Furthermore I can't find your motor test video, although I should say it seems I have an Askoll M500 inductive motor (no brushes) fitted to my Beko wmb 81445 LW

[@stickyviews368]

Brilliant that sorted my problem - many thanks

[@Vik97025]

thnx dear .it saved me to put out money

[@honda4004]

Found that program dial wears slightly and the dial switch then makes led screen flick in between programs . I replaced dial select program switch and worked

[@darrenholmes609]

Very helpful, got me out of a situation, thanks.

[@jasoncrowder843]

Hi we have a beko the door shuts but the lock doesn't come on do I have to replace the lock as it won't let us use it or do we just follow these instructions n it will reset it

[@anitarani9288]

Omg 😳 it’s working thankyou soooo much sir it’s amazing 😻

[@How-to-repair]

Really glad you got your washer going repairing is not a complicated thing I'm glad I could help you please remember to subscribe to the channel as that's what keeps us going and able to make these videos for you

[@colinedmondson2505]

I managed to get to the diagnostic screen and it started flashing, however when i pressed next it did not rotate but started filling up like it was in a cycle. WMB751441LA, but no spinning. the dial seems to have symbols in order of pre fill fill then spin. is this depending on the model?

[@scarthotutor]

Thankyou so much, very helpful and clear...

[@patrickswoon2404]

Great video thanx, mine says E17, could you please be so kind as to tell me what you think is wrong?

[@ArtyomEryomin]

Good, you're testing!

[@PeterCampbell8Worlds]

Hi again, today the washing machine stopped again, when I try to get into the diag mode it just puts up 1602 and the screen, any advice? Thanks

[@grumpy_poo]

Excellent..... Thank you so much for the information....It is so useful...

[@How-to-repair]

+grumpy poo I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@shaunpeterson-dl3ki]

very helpful video 👍

[@susannealp4923]

Thank u for the video i fixed my machince

[@PeterCampbell8Worlds]

Legend! Had 3 washing machines in the last year, this just happened to mine, ran diagnostic and all fixed TY

[@klauspopp910]

Great! Thank you for your help!

[@How-to-repair]

You're welcome! I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@markmclean4897]

Thanks for posting 👍

[@user-rt9iu7xg1s]

What if the machine wont enter diagnostic mode? Does that mean the board is fried?

[@beckilturner]

This was really useful. Thank you I preformed the test and everything was working. But when I put my machine on the cycle won't start. The screen had a time on it and the large E and nothing else Help! Any clue ? Thanks

[@How-to-repair]

sorry for delay when you have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@thedessy226]

Great video. Very helpful

[@kelsievalentine8995]

hi mine go's in test mode then when i press start nothing happens? please help me

[@wheels6566]

Hi Mate, my machine is leaking water from the bottom when I start it up. I have checked all the hoses and all are good no leaks there. What could it be! There is some rust on the bottom edge (right hand side) of the machine as you look at the front of it. Any help would be great cheers

[@ForeverSteffie]

What if it doesnt that with the screen flash on first press?

[@Monsterawr]

what do i do with the E 18 error code ? Test mode does not initiate at all

[@BelindaHogan-xs5sg]

Thanks that was brilliant 🤩

[@How-to-repair]

Glad I helped you fix your Beko washing machine @BelindaHogan-xs5sg please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@AdigAWE]

Thanks that was very helpful

[@How-to-repair]

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@aschkan9958]

Tanks a lot very useful goodluck 👍👍👍👍👍

[@HiR8Sreams]

Hello I was wondering my washing machine does not have a on off button I just have a start / stop and the on / off is on my knob do you know how I can do this my washing machine is a beko vm74165w thanks

[@Womble14]

When mine does the slow spin in either direction I hear a knocking noise like the motor is slipping any ideas ?

[@robjenkins9450]

I have a beko wmb 81445 lw machine that starts to fill and then drain straight away without filling properly. It just keeps looping this short cycle. Following guides when I depress the start button & then turn off I get code 04 12. If I continue to press the start button 1st press I get screen flash then 2. I get pre rinse fill. 3. I get main wash fill. 4. I get all softener fill. 5 seems to sound lile draining. No motor cycling. On resetting it seems I'm still in fill and drain cycle.. Any help please ?

[@traylvskev]

Good afternoon, please help me! My machine has been playing up for a few weeks, not starting when play is pressed (thinking it was me forgetting to press it) but last night it did it and I know I pressed play, long story short, it washed that load, since then I tried another load and it will not play at all, I’ve followed the instructions above from the start, once the error e17 goes off, the full screen of symbols comes on, but won’t do anything when I press play, it doesn’t do what your machine here is doing, am I doing something wrong? Thanks in advance

[@chrisstewart2398]

We've the same issue once we get into diagnostic mode, pressing Start doesn't cycle through the tests. Did you solve this?

[@jonisthedon1]

Hello I have no power on my beko washing machine I've changed the fuse checked power on the socket any ideas thanks

[@peggy3377]

Beko wmb 51041pt water leaks on floor when waschmaschine on .what need to do?

[@lukkki1000]

Hello, Good manual. Please, could you help me, how to enter test mode in BEKO WTV 6602 B0?

[@sevcanozyurt]

Thank you so much 👍

[@How-to-repair]

Thanks 👍

[@revparsons3tl]

mine just getting stuck will not start a cycle or spin and drain

[@andrewcampbell784]

Hi, I have a WMB 81241 LW washing machine, I tried the diagnostic test, I get e18 error code, when I let go of the start button, the whole display lights up, when I press the start button, nothing happens. When I try to select a programme nothing shows up apart from woollens mode but still it does not work, do you think the programmer is kaput?

[@judenicholas755]

I have error code 17 Do you have solution please

[@talishadaji7613]

I followed but it didn't flash what have I done wrong plz

[@clairemartin6505]

I did this but after the screen comes on for diagnostic it won’t do anything when I press start? Please help

[@ronymuhamad5343]

Please can you tell me if it's given me e07 and not working what is mean

[@sammymcgee5696]

Hi when you start the test the number 1510 appears can you tell me what this means thanks

[@miralemhrnjicic5057]

Hello. Does this video also apply to the wmy 71023 lmb3 washing machine?

[@How-to-repair]

The test sequences different on many different washing machines. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

[@PanKamyczek666]

Hello could you help me? I have beko wmb 71242 and it display E 18 in test mode ? I can`t find nothing about it in internet. Please help me!

[@shahidpakistani4122]

Nice video and so much

[@nicolafortune8754]

Hi my beko wme7227b shows 8364 in diagnosis mode and does do anything else meaning door does lock or any other tests can u help please

[@samhamoudi5081]

Hi My Beko washing machine tries to turn but cannot and keeps flicking and ending up back in same position,can you help please?

[@corpusstalker]

Hi, my machine is saying code 1602, won't do anything when I try and run diagnosis mode either, any ideas? Thanks

[@corpusstalker]

Before that it said error code e18 which the diagnosis thing fixed

[@jody1945]

I have the same problem did you fix it? The water is not heating up on mine

[@jabsukkill]

beko wme72475 wont start ive had it in test mode but northing happens it won spin heat up ect all the display is lit up aswell and i have also cleaned the filter out and drained it

[@kayleighkeen8064]

I've just done this but on the first press or second it doesn't spin at all, I've called beko as it's still under guarantee but they just told me to do this, any ideas please?

[@How-to-repair]

first i need to know the fault second don't do any work on it as it will void your guarantee

[@tgpok4r]

HELP!! mine fills up but does not wash, it will spin empty, is it a faulty motor?

[@HenslyAraullo]

thank you done it and my beko defaults to normal

[@jabsukkill]

i have error e05 what does this mean? i have cleaned the drainage filrter but still wont stat

[@caz07753]

My washer won’t spin right so no spin???

[@lynntimmins3948]

E 05 Displayed what does it mean ???

[@tiagomacedo1077]

Hi, I have a beko washing machine model wmb 91242 that broke down. I saw on the main board a resistance and 8 Pin IC SOC burned. The resistance is one of 1 or 2 W in the opposite part of the IC. Can you tell me the PN of these components to be able to replace? Best regards

[@sonusingh-3292]

How did u fix it then?

[@conorotoole6653]

Can you please show me the demonstration on BEKO WME7247W

[@manuelstoica9716]

Thank you it worked 👍

[@How-to-repair]

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@roxellyvargasterrones279]

please help me. When the washer was restarted, the system does not work, that is, it does not drop water and does not test the functions of the washing machine.

[@zarenkurda2869]

Brilliant

[@nassormbarouk4006]

What happens if i get error code 17

[@6muffinman]

Could you please tell myself how do i run a Beko Washing Machine WM 74135 W in test mode sequence !! on this model there is on a Start/Pause button and not an On/Off button needed to be depressed together to enter the Test Mode Sequence !!! All suggestions will be gratefully recieved.

[@christinedobson3949]

I have the same problem on my Becko WM94145W, no on button!

[@martinreynolds4973]

This works, thanks

[@MrCheekeymonkey]

Hi I have just changed the element on my machine and it’s heating up but half way through the was the water is cold any ideas please ?

[@glebite10]

when it gets to rinses the water is cold!!!!!

[@Sammysings]

Brilliant thank you

[@froggy-gh8wv]

unfortunately its my LCD display that flips from one program to another and will not stay where i want it to be,it does eventually but will still occasionally flash?

[@honda4004]

hi ive got exactly same did you get a fix for it thanks

[@Fluffgar]

After activating diagnostic mode the machine is unresponsive. Start button does not cycle through functions as shown. Any clues as to what the issue could be or is my machine just dead?

[@chrisstewart2398]

Got the same issue on our Beko. Did you figure this out?

[@Gledge1]

Hi there, are all the test sequences in that same order?

[@Gledge1]

I think my machine has schizophrenia!

[@azadbu4815]

شكرا للمساعده

[@ammyamman85]

hi my washing machine working fine but not cleaning cloths properly. please advise me thanks

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@dvsamsmith]

thank you

[@victorseantech]

i have beko i reset show code 1602 first spinning right and after right press again do nothing ... help please

[@How-to-repair]

1602 is not an error code this comes up on the display when sometimes there are problems you will need to find out what the error code is

[@mustafaal-obaidy4373]

I have beco washer machine and but today i saw the water come out from door and under machine ..so can anyone help what i must to do for this problem ??

[@jaydavies5076]

Hi f-07 same as on video what can it be it does nothink