BELUGA RACING AXLE BACK EXHAUST INSTALL! (G37, G35 Sedan, 370GT, Q40)

Hey everyone!
Today we're installing a BELUGA RACING AXLE BACK on Albert's G37 sedan! So excited!
Thank you to Beluga Racing for supporting us and sponsoring today's video!
Find it here: belugaracing.c...
Fits G35 G37 Q40 370GT sedan
Instagrams:
_albertabraham
jdmjunkyard_indey
balancepointmedia
#G37 #370GT #BelugaRacing

[@BalancePointMedia]

Thank you to Beluga Racing for supporting us and sponsoring today's video! Find it here: belugaracing.com/product/beluga-racing-performance-axle-back-exhaust-for-2007-2013-infiniti-g35-g37-sedan/

[@kevinjefferson-vx1cv]

Bruh at 13:06 he said these nuts im soo fn 💀😂😂😂😂😂😭😭😭😭😭

[@BalancePointMedia]

💀

[@danger-wildman7x]

Yesss that’s the exact type of tone I want with mine! Deep but not too obnoxious and high pitched. PERFECT thank you guys 🫡 Also love all the insight and information y’all provide. Much appreciated

[@BalancePointMedia]

Happy you agree! I really do love the sound. Curious to see how it will change when I eventually throw on high flow cats, I'm guessing just a tad bit more tone

[@alandarnell9062]

What suspension set up is this? I want to run something on my g that has a similar stance

[@BalancePointMedia]

Currently sitting on just swift springs 👍 Here’s a video review of em if you’re interested: kzbin.info/www/bejne/n2nEZ3acacyUndE

[@shalamalama6668]

Would adding 12 or 18 inch resonator pipes make it deeper

[@BalancePointMedia]

Are you referring to at the midpipe? If you have oem resonators and change to an aftermarket resonator it might make it a tad louder and maybe deeper but I can’t say for sure

[@shalamalama6668]

@@BalancePointMedia yes was thinking about replacing oem resonators with 18 inch vibrants

[@bensyoutubeacc]

wow thats the perfect sound im looking for, definitely gonna try this exhaust.

[@BalancePointMedia]

You'll love it

[@lieutenantdan8170]

Get high flow cats and it will have the perfect sound

[@BalancePointMedia]

Agreed! We have kinetix hfc ready to install and will do a video once they’re on

[@devilzwanganmidnight5951]

What’s the wheel/tire and brand setup?

[@jeffpatchell6413]

Just had mine installed today at the shop. He had to weld an extra piece of pipe for the Beluga to slip over.

[@BalancePointMedia]

We got it but it took quite a bit of time with the vice grips to open up the axleback to slip on I could see how adding a piece of pipe could make it work better for sure

[@jeffpatchell6413]

@BalancePointMedia Yeah he just welded on a small piece on each side for it to slip on. Then he used the clamps.

[@jeffpatchell6413]

It sounds nice! Not much louder than stock. Just a little deeper tone.

[@BalancePointMedia]

@@jeffpatchell6413 right! My gf just valeted the car yesterday and she said the valet couldn’t stop talking about how much he loved the sound lol I personally think it’s about as good as it gets if you don’t want something loud. Glad the install worked out for ya in the long run 👍👍👍

[@jeffpatchell6413]

@BalancePointMedia Oh yeah I love the sound! I didn't want anything that sounded like a ricer. Just like it because it's just a little deeper.

[@jasonp.l5817]

Where’s the diffuser from ?

[@paulc.9871]

So I actually have the Tanabe/Revel axelback. Love it, but wish it was just a touch louder. What would you recommend I install to SLIGHTLY amp up the noise?

[@BalancePointMedia]

I’ve heard that people have gotten good results from adding a pair of his flow cats or resonated test pipes. I’m partial to doing hi flow cats and have a set of kinetix we’ll be installing soon so I’ll update to see if it made a difference 👍

[@shitlocks5464]

Will a y-pipe make it sound nice and not too loud?

[@tleoipl37]

@@shitlocks5464need a full CB exhaust to notice results and sound

[@DavidQ50]

Hey would this fit a g25x sedan 2011

[@BalancePointMedia]

So, with my research of other axleback exhausts on the market, it seems like other options are compatible with both G37 and G25. I would say based on this that the beluga would probably fit a G25 as well! Can't guarantee it but I'd be surprised if it didn't fit

[@DavidQ50]

@@BalancePointMedia thank you I appreciate it!

[@BalancePointMedia]

@@DavidQ50 Happy to help!

[@vqislife6024]

Wow was looking for a review and u just added it lol

[@BalancePointMedia]

Glad we could help lol. 🤙

[@JJ-ne4hw]

Great content. I like the wing? What kind is it?

[@BalancePointMedia]

Thank you for your support! We did a video review of the spoiler here: kzbin.info/www/bejne/o2OrfGymhqeWp9E

[@darrelljerome7268]

How did you get the stock exhaust to actually slip off the rusted pipe?

[@billycross3785]

Hi are you guys going to do any more Ducati 899 videos if you still have it they were the best 👍👍

[@BalancePointMedia]

We do still have it! I have a couple videos we need to get recorded so hopefully soon!

[@billycross3785]

@@BalancePointMedia 👍👍👍👍👍👍👍👍👍😁

[@bradenwhite4356]

I see your cats are rattling too... I bought some hfc 9 months ago that I have yet to put in lol

[@BalancePointMedia]

lol yep we have kinetix hfc that I bought like 2 months ago but I really dont want to deal with the install so we've been putting it off too

[@bradenwhite4356]

@@BalancePointMedia it is truly a pain on the x model lol. I tried once and I got the demon bolts off, but I could not access the lower bolts with the crossbar in the way

[@Jayreacts75]

Will this fit a q40 since there pretty much the same car

[@BalancePointMedia]

You’re right it will! I’ll update the title and info

[@Jayreacts75]

@@BalancePointMedia thanks great video I’ll definitely keep this product in mind

[@jam.5505]

I love the wheels bro what are they

[@BalancePointMedia]

Hey brother they are vordoven forme 9 wheels, the original design is a work emotion cr kai and a lot of companies make a similar style

[@rubi42222]

does it fit m37 2011

[@BalancePointMedia]

Probably would but would most likely need a little modification, I'm sure an exhaust shop could sort it out

[@snycerdoodle]

How do you think this would sound paired with berk hfcs?

[@BalancePointMedia]

We actually have kinetix hfc ready to install so once I get a stock cat sound video we will install the kinetix and get a clip. I’m sure it’ll be very similar to Berk

[@snycerdoodle]

@@BalancePointMedia That would be great, thats the setup im probably going with

[@BalancePointMedia]

@@snycerdoodle awesome! It’ll be a few weeks but as soon as they’re on we’ll get the sound clip and post it up 👍

[@Jose-mw5yo]

Does this actually fit a 15 Q40?

[@BalancePointMedia]

It would!

[@smplygreatest1]

You runnin coilovers or springs?

[@BalancePointMedia]

We’re on a set of swift springs for the g37x sedan. 👍

[@investinjahcoin5029]

How’s the drone at highway speeds? I’m considering buying this for my new g37x sedan. My old one had a ton of drone due to the custom exhaust being so loud

[@BalancePointMedia]

The in cabin sound difference is very minor, the only time I really hear it is when I’m at a very low rpm and give it a lot of throttle to get moving quick; then it’s like a bass heavy hum under 2k rpm that goes away over 2k Overall super mild which I’d say makes it really ideal for a daily 👍

[@investinjahcoin5029]

@@BalancePointMedia how’d you get it to not leak? I just put mine on last night and it was extremely difficult to get it over the exhaust pipe. And it leaks after clamping it

[@BalancePointMedia]

It took a lot of work to open up the piping properly to be honest. I don't imagine the tanabe would have had this level of difficulty at the slip on portion but I think the aesthetics of this exhaust are superior and I love the sound so overall I'm happy. Were you able to solve it yet? If not just try prying open the slip on portion more. Took us a while

[@investinjahcoin5029]

@@BalancePointMedia I tried prying it open as much as I could and hammering it on. Still was leaking :/ Ended up covering it in exhaust sealer and it’s fine now

[@jacobsmith6367]

Way to quiet

[@BalancePointMedia]

Yeah not every exhaust is going to be for everybody- sounds like you might like an ISR single or Tomei

[@user-op7cx1mc1b]

Get a crome delete

[@snickerdoodle1057]

What spoiler is that

[@BalancePointMedia]

It was a 2x2 carbon one we found on ebay a while back! Here is our review on it kzbin.info/www/bejne/o2OrfGymhqeWp9E

[@snickerdoodle1057]

@@BalancePointMedia thank you so much, I think ima pull the trigger on that one

[@BalancePointMedia]

@@snickerdoodle1057 we love it! Had it for like 4 years now zero issues