Bench top Edge Jointing Tip For Easy Glue Joints.

[@christophermcclellan8730]

I know you make money off your long form videos and I respect that, but I really do get excited when one of these drops on KZbin.

[@ikust007]

Agree !

[@zhookeeper]

This is the absolutely BEST tutorials on you tube. The delivery is succinct, practical and no BS. I love it. I get hints and tips every time time I watch one. Thank you!

[@BrownianMotionPicture]

Another excellent video. The archive you are building of all this technique and methodology is a goldmine now and for future generations.

[@Tome4kkkk]

Even though I know all of this I'm still watching hypnotized. You are a natural-born teacher. So, I'm watching... watching... and bam! I learned something new still!

[@ikust007]

A nice successor/follower to Paul Sellers. Bravo !

[@darrylportelli]

One of the best woodworking channels on KZbin!!! Thanks Richard !!

[@JonElofson]

Finished the last series a while ago and have been going through "the English Woodworker" withdrawal. This helps. Great tip that I will be sure to use all the time.

[@petertiffney4413]

Richard am a 60 year old bench joiner and so happy to see you share your knowledge with others ps I love my e c e planes ,

[@ilirgorani4261]

Superb presentation Richard. Looking forward to the next series. Cheers.

[@rjamsbury1]

This short video is an absolute treasure trove! Bravo maestro!

[@bill4123]

I'm shocked that this is the first time I've seen this method. It's fabulous!

[@g5flyr169]

EXACTLY! It’s so intuitive. How is it I didn’t think of it on my own.

[@dilex2870]

Thank you, I Like you teaching🎉

[@LiefZimmerman]

“Don’t do this…” - 😂 Love your videos, love your approach, love your reasoning behind your approach. I learn something new each time I watch - including what NOT to do! Cheers.

[@toml6249]

Would be overjoyed to apprentice with you! Your approach to explaining things and the workings is brilliant and faff-less. Thanks for another free video!

[@sigogglin]

So glad I saw the Rex K video that mentions this channel.

[@bertRaven1]

fantastic video! glad you turned the comments on, hopefully the youtube algo boosts your channel, you deserve a load more subscribers and views!

[@aarondaniels629]

Loved this video!

[@mikegleaden5096]

Thanks for this simple technique. Used this to edge joint oak boards for a table top and it worked far better than any method I'd tried before.

[@charlier7711]

Thank you! This was an excellent explanation and demonstration on edge jointing.

[@altheteacher]

Thanks for this Richard. As a guitar maker (luthier to the posh knobs) I frequently join guitar tops and this a wonderful alternative to using a conventional shooting board and will prove really useful when dealing with stupid shaped pieces.. nice one.

[@BobMuir100]

Such great stuff! Bob England

[@makermark67]

Great description, great example, great advice. Thanks, Richard

[@Erik_The_Viking]

I've had trouble with edge joints and I tried this trick. Worked like a champ! Thanks!

[@ianpearse4480]

I had not thought through the angled planning, very clever. Cheers.

[@charleskyler1928]

I miss old lumpy with the branch handle. Good info as always.

[@Swarm509]

Love this idea of using your bench as shooting board. Building a very late one for myself now so I think I will need to give this a go. I find getting 90 degree narrow edges to still be a problem for me, I tend to end up chasing the angle going too far, or spend too long with too minor of a cut not getting back square, or putting a twist in the top.... only to end up making one end low and the entire edge not flat along the length. This may help me with that.

[@quietwoodworking]

Sir Richard, you are a master woodworker!

[@123reivax123]

Well, a fabulously smart tutorial. This technique will be with me for the rest of my days. Thank you for your generosity of spirit Richard.

[@torque8899]

You really need to come back to youtube. If you’d have posted regularly a few years ago you’d have been huge by now. I know you went a different path but KZbin misses you!

[@carlgrubbs1026]

I tried it. Works like a charm! Thanks man!!

[@AaronSprague1]

Top notch, I never thought of using my bench like that.

[@BostLabs]

Amazing! I never considered handling it like that. Thank you.

[@AirwolfCrazy]

Nice variation on edging.

[@scannon90]

That was very helpful. Edge jointing can be extremely fiddly.

[@dpmeyer4867]

Thanks

[@joer5627]

Now, how did you think of this? I’m needing to start the plans I’ve recently purchased. I will admit once in a while I think “what did he just say?” After playing a few times I get it. A good idea young man!

[@marchebert9813]

Is there anything more beautiful than the sound of the plane taking a shaving?

[@tiktokloe]

I am subscribing for that accent 😂👍🏻

[@tonyalways7174]

Really impressive as ever.

[@coljter15]

That was a really great video, thank you!

[@lerayhillmon9485]

Keep them coming

[@maciejtrybilo]

I'm just here to say that I've bought several of Richard's video series and they all were totally worth it. I wish ad revenue would be enough to support such channels, but it just isn't.

[@davidballnh]

Brilliant; thank you--keeps the plane from tilting (versus when the board is in the vise).

[@davidballnh]

how tall do you recommend the winding sticks (or whatever one places under the board) be? 1/3 the plane blade's width?

[@michaellee8198]

Good advice; nice style!

[@dannyhale7645]

That's brilliant.

[@vance7274]

Excellent!!!

[@RobertoFischer]

A similar technique is used in planing the edge of the two sides of a guitar top for gluing.

[@paullampru3591]

Given a flat-square board, would dowels provide strength and alignment?

[@1pcfred]

Good stuff!

[@Tome4kkkk]

For anyone looking for the link to the free video on jointing (from the trestle table project): Log in and go to ‘My Videos Page’.

[@dbnoho]

Do absolutely zero of this. Eyeball it. Spread glue everywhere. Don’t use clamps. Set them upright and let gravity push one on to the other. Whatever comes out, call it modern art, belittle people for not understanding your process. Price it at $5,000. Move on to the next project.

[@garyoshea2171]

Buy a Maffel track saw they’re unbelievably accurate.