A walk through with of Benchmade's Guided Field Sharpener with Steve Baker from Work Sharp.
Пікірлер: 151
@BIZARBIES6 жыл бұрын
Work Sharp makes a non *Benchmade* sharpener, exactly the same, but its yellow... and half as *expensive* (paid $14 for the yellow one). I love mine, it can touch up a blade really quick and its small enough to throw in a back pack to have with ya all the time. The strop leather is so so, but works ok. The ceramic rod is awesome. Overall its a great sharpener!
@user-gs1me7xe8i6 жыл бұрын
SeibRazib1972
@East_Performance5 жыл бұрын
Benchmade doesnt seem to have 20 degree guided angle
@East_Performance5 жыл бұрын
I mean 25 degrre
@daleray38955 жыл бұрын
Mine was 25$... now they seem even more expensive.
@brianmedeiros4175 жыл бұрын
$26.49 on Amazon
@Taquitos956 жыл бұрын
Who tf edited this. Most of the close up shots are of an entirely different side than he’s using
@wstewart55324 жыл бұрын
Nick Myrant fail
@chocloditelensman4 жыл бұрын
It’s just a reference video. I think most people can figure it out.
@imCXS-zh2yt Жыл бұрын
I don’t understand, the vocabulary is different than the images - *shame*
@billydecker9396 Жыл бұрын
I noticed that as well. Next...
@adambernard14042 жыл бұрын
Blown away with the functionality packed into this. 45$ at REI today
@AdamasOldblade2 жыл бұрын
Four and a half years after this video came out and I finally ended up purchasing one of these. I still am brand loyal to the Edge Pro Professional system I use, but ever since my job allowed knives to be used again I wanted a touch up system on the go. Hopefully this is worth the money, not that it was expensive, but it was a bit higher than other field sharpeners.
@jasonbourne2852 Жыл бұрын
How did it go ?
@lc6936 Жыл бұрын
I love this sharpener. Puts a good edge on it with very little effort.
@joeleonetti89765 жыл бұрын
For my chisels and hand planes I use both the reflection of edge and fingernail test.
@trevorthomas10302 ай бұрын
On my 940, I typically just run it on the ceramic stone and strop it. I'm a bit too nervous to run it on the diamond stones because I'm still a very novice knife sharpener.
@DavidWilliams-wr4wb5 ай бұрын
I have all of the hi end benchmades with the sv90 steel and it destroys shapeners, knocks the diamond off in one use and it can smooth out a rough stone rather quickly, they hold edges longer, especially the full size late model sv90 bug out , I’ve already worn out 5 work sharp field sharpeners on one bug out , my mini bug out is made from sv30 which is still hard but gets a burr much faster than the sv90 stone killers 😂
@lukealdrich47805 ай бұрын
Thanks Good to know..
@knifeaddict10143 жыл бұрын
I absolutely love love love the bm knife sharpener gets mine razor sharp and I use up to 6in fixes blade on it to and the strop is amazing!!!
@ColonelSanders173 жыл бұрын
I use it for my kitchen knives and my interchangeable blades for my OTF switch blades.
@SouthernOutdoorRevolution4 ай бұрын
So Work Sharp makes these for BenchMade, no wonder I can buy 2 Work Sharp Guided Field Sharpener for the price of 1 BenchMade, and that’s what I did. Changing the color from Yellow to Blue must be expensive guys and gals and I’m a big BenchMade fan!
@chocloditelensman4 жыл бұрын
I love this sharpener. It’s much better than the spyderco tri-sharpener. I had three knives sharpened in about 30 minutes. I sharpened my wife’s knives for cutting veggies and she loves that I bought this - even for $40 !!! I might buy a second just to have...
@DarkKnight-lq9cw4 жыл бұрын
Buy the Worksharp regular yellow. It's the same one for half the price. Love Benchmade but this is ridiculous.
@jakegwen23934 жыл бұрын
Does it work on S30v steel?
@nigelmagoo4 жыл бұрын
@@jakegwen2393 Beautifully. That's a good new metallurgy steel. I like it.
@N3wbMa5t3r2 жыл бұрын
Spyderco Sharpmaker runs circles around this sharpener.
@CaptDavesSportfishing4 жыл бұрын
add $25 for words benchmade and blue?
@landonbragg67325 жыл бұрын
How come this is just the worksharp field guide sharpener but it’s like the times more expensive
@Goliad_-ox8hgАй бұрын
Need a 22-25° for the bigger Benchmade. Like Presidio and Adamas.
@SnipezTTD3 жыл бұрын
They put a slot for broad heads?! Hell yes, I could definitely use this!
@Horde3343 жыл бұрын
There's a standard worksharp version that's yellow and much cheaper don't let benchmade scam you for them just making the guided sharpener blue and slapping their name on it.
@tomdemerly6 жыл бұрын
Great demo.
@barrybueler33565 жыл бұрын
Closeups when it’s not called for no closeup when u need it diamond stone closeup during ceramic sharpening what’s going on who edited this great job 😂.
@jeffreyschmidt58322 жыл бұрын
Informative and easy to use. The video needs some sequence editing.
@Jon-iw9gr2 жыл бұрын
This is literally just a blue worksharp field sharpener. Its made by worksharp and benchmade paid to put their brand on. Just buy the yellow one, its a tiny bit cheaper and is exactly the same thing.
@Motorcyclewindtherapy6 жыл бұрын
I appreciate this vid. I have the work sharp machine but it's messing up some...and honestly its overkill for what the blade maintenance i do 99%of the time. The Benchmade version seems to be pretty well thought out - and I do EDC Benchmade knives....so I t think I will look very close at getting this.
@survivalofthefittest4096 жыл бұрын
The Benchmade IS a WorkSharp. Its not made or produced by Benchmade at all.
@chocloditelensman4 жыл бұрын
You won’t regret buying this. It’s amazing. I use it for my strider, spyderco knives.
@zenovice82406 жыл бұрын
You failed to mention the easiest, most basic way to determine whether or not a knife is sharp - place it at a 90 degree angle to your thumb and rub your thumb across it. To determine if you have a "rolled" edge, do this from both sides of the knife. If one side is rolled, use a gentle stroke or two and take care of the rolled edge. Easy-Peasy.
@chocloditelensman4 жыл бұрын
Zeno Vice many people don’t know what side the rolled side is...
@frankkociara42286 жыл бұрын
I have 1 of these. gets yur knives so sharp they can cut buttair.
@Dan_Hazard5 жыл бұрын
@Eric Brooks I read it as butthair Love your comment
@lparson325266 жыл бұрын
Why is it that Benchmade offers a sharpener with a different angle than is initially ground on the knives you sell?
@MrMZaccone5 жыл бұрын
Because the edges that Benchmade puts on at their factory ... suck.
@MrMZaccone5 жыл бұрын
@@alebastrgmailcom Including sometimes being "different" on each side of the same knife. Like I said, they suck. The knives themselves are quite high quality but the factory applied edges suck.
@K5_Chris5 жыл бұрын
LeRoy Parson because benchmade’s quality control is nonexistent so you’re gonna want to end up reprofiling the edge anyways
@chocloditelensman4 жыл бұрын
I don’t like benchmade knives. Never hold an edge but I love this sharpener on my strider and spyderco knives.
@dustinpendergraft94606 жыл бұрын
This why I love benchmade knife I always carry benchmade knife
@chocloditelensman4 жыл бұрын
Dustin Pendergraft try a strider and you’ll never go back to benchmade.
@elisakeehn32272 жыл бұрын
Good to know
@brandonl52474 жыл бұрын
I just bought this sharpener and i pulled off the stones and was wondering why the course and fine sife made in CHINA???
@5five6x453 жыл бұрын
GOOD INFO HELL YEA!
@MrEric08222 жыл бұрын
Just got my new aluminum Bugout. Love the overall vibe, but Benchmade quality control is atrocious when it comes to blade bevel consistency. One side is pretty consistent; the other side looks like a kid sharpened it on the belt. Huge fat bevel from belly to tip. Just embarrassing aethetics for that price. Shameful.
@andresmiguel25734 жыл бұрын
Hi, can you get a mirror polish with this on your edge?
@robbiewarren50493 жыл бұрын
probably not, you would most likely need a finer grit stone
@cdh30882 жыл бұрын
How does it work on the S30V ? I have the Bushcrafter 162 and the Bugout.
@JW-vo5gs2 ай бұрын
So this is basically just a work sharp rebranded?
@kurtglo Жыл бұрын
I just recently purchased the Benchmade Steep Country 15006. I have two questions; first, what angle does this particular knife need to be sharpened? I was told 17 degrees but I also heard 14 degrees per side. Second, does Benchmade sell a sharpener that's catered for this knife? Thank you
@Deadpoolmasterchief6 жыл бұрын
Yeah get standard work sharp n paint it blue bam u got pretty much the exact same thing
@nigelmagoo4 жыл бұрын
Yet the Benchmade version has fewer diamonds on the coarse side because of the logo. It's a very versatile sharpener for it's size.
@fishspanker94725 жыл бұрын
Would sharpening a north fork on this screw it up since the angle of the blade is at 35 and the guide is 25?
@TheNeoChannelMc4 жыл бұрын
the north fork also have a recurve, doesn't that make sharpening nearly impossible on a flat stone?
@N3wbMa5t3r2 жыл бұрын
With the recurve on the blade, you should use the Spyderco Sharpmaker. 😆
@ivantinoco2643 Жыл бұрын
If I use my chosera ninawa stones to sharpen my benchmade, will it void my warranty?
@adrianotero7963 Жыл бұрын
Spyderco sharpener is quicker and a no brainer....also I find it works better for larger knives.....
@missoldday2 жыл бұрын
❤
@hectorrivera66242 жыл бұрын
Im just here for the Benchmade hate comments.
@daryooshfatemi4 жыл бұрын
That’s not a Benchmade by any mean. That’s a blue Work Sharp with a Benchmade lable on it.
@daryooshfatemi4 жыл бұрын
kawika dav Search “WorkSharp guided field”. I have ordered one from Amazon.
@daryooshfatemi4 жыл бұрын
kawika dav Agree. In this case they are very same. In fact the original one with yellow colour is better in field. More contrast. And for my taste way more beautiful than blue. And the Benchmade one is more expensive with zero reason. Actually it should be cheaper because it has advertisement essences.
@nigelmagoo4 жыл бұрын
They're made by Darex in China. I own 2 Benchmade knives from USA, but China is capable of quality products. Many company's outsource these days, and Made In Taiwan doesn't mean what it used to in the 70's.
@daryooshfatemi4 жыл бұрын
Peter Basaraba I didn’t talk about outsourcing, I say this is a blue worksharp, and I like the original yellow one which is way cheaper but is the original one. Benchmade ordered then in blue to ripoff people out of knife community. Other than colour nothing is different.
@aaronrisch63344 жыл бұрын
Not only has Benchmade done this with Work Sharp, but they did it with Exotac ferrocerium rods as well. Same blue color... I will be purchasing the products mentioned by Exotac and Work Sharp versions respectively. Why pay double just for the Benchmade name? WTF?
@Progapanda6 жыл бұрын
Does this also have 25 degree guides for the ceramic rod and strop?
@knifeaddict10143 жыл бұрын
Yes it does
@its_will17183 жыл бұрын
Can you use this on 440c steel? I have a viper tech ghost OTF tanto blade! Can I sharpen with this?
@shad25292 жыл бұрын
Will this sharpen my knives enough to cut through guns
@madmartigan77232 жыл бұрын
Cool
@thetazva4 жыл бұрын
$29.28 on Amazon.
@rowanfernsler97254 жыл бұрын
Is that a work sharp shirt? I’m going to bet that the benchmade sharpener is pretty much the same as the worksharp one, just rebranded and sold for a markup because of the name.
@Horde3343 жыл бұрын
Butterfly tax benchmade always loves to overvalue their name so much its a huge turn off to any of their offerings great isn't it?
@Keith_the_knife_freak6 жыл бұрын
Nice 👍👍👍
@sudinghosh9355 Жыл бұрын
I'm really pleased with this! It works like a charm kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
@sospookeyj25985 жыл бұрын
were can you buy that blue knife display stand?
@BananaBoat629 Жыл бұрын
Do you have to clean this tool?
@rolandtorres68993 жыл бұрын
Where you get the replacement plates?
@DB-qm4jx3 жыл бұрын
Let's just be friends
@saiyanprince73256 жыл бұрын
FIRST THOUSAND VIEWS
@cardo71811 ай бұрын
Why play distracting music?
@skinny43 жыл бұрын
Anyone here that actually owns a Benchmade buy one of these things? Is it worth the money?
@Horde3343 жыл бұрын
Don't own a benchmade but i have owned the regular worksharp guided field sharpener and if your thinking about buying one buy the regular one not the benchmade branded one all they did was make it blue and put their logo on the plates (which in some reviews people have said it actually interferes with the diamond plate actually giving a consistent edge.
@N3wbMa5t3r2 жыл бұрын
No, don't buy this...
@FranklinHicks-qs4gs4 жыл бұрын
Why is this 50% more than the non benchmade unit???? Wtc
@amanhyseneunom48114 жыл бұрын
Because two brands want more than 1 i bet
@Metal_Matrix4 жыл бұрын
Butterfly tax
@FranklinHicks-qs4gs4 жыл бұрын
@@Metal_Matrix bingo
@sprinkleddonuts6094 Жыл бұрын
Benchmade name should be on a plastic piece not the stone… my knife keeps grabbing the name
@brockb69424 жыл бұрын
If there was ever was any doubt on if the internet was a terrible, stupid place, look no further than how many people commented on something so stupid and insignificant. I’m pretty sure the inconsistency is to show the technique, not to be nominated for an Emmy
@brockb69424 жыл бұрын
But I am surprised I didn’t see a million comments on how “unsafe” it is to touch the edge
@casey1979305 жыл бұрын
Dick's. "No one can destroy their client base like us!" Benchmade. "Hold my beer"
@robertlefeaux5 жыл бұрын
It appears the editing is on par with their knife quality assurance department. Sloppy, misaligned, dull.
@profd654 жыл бұрын
It appears we have yet another guy who doesn't even own a Benchmade mindlessly repeating crap that he's read online.
@RoastedHVAC4 жыл бұрын
@@profd65 This is true... or from Gerber's marketing department :D
@N3wbMa5t3r2 жыл бұрын
@@profd65 I own a ton of Benchmades and I can agree that their quality is pretty shitty.
@profd652 жыл бұрын
@@N3wbMa5t3r You bought a ton of expensive knives that in your opinion are shitty quality? You sound like an idiot.
@znate67304 жыл бұрын
Please I need some help 😭Can someone would like to give some help for a lil Frenchy ?
@brandonl52474 жыл бұрын
Did you still need help ?
@N3wbMa5t3r2 жыл бұрын
why on earth did Benchmade imprint their logo ON the coarse grit? This makes inconsistent sharpening because of the logo divots. 🤡🤡🤡
@thronebreaker69505 жыл бұрын
Someone is ripping off of someone else lol dam
@chocloditelensman4 жыл бұрын
throne breaker knife sharps makes them for benchmade. You’re paying extra for the benchmade name and I don’t like the color yellow.
@brianmedeiros4175 жыл бұрын
eww he said acrosst.
@mountaindont34ify4 жыл бұрын
Fuckin idiots. I hate people who say that stupid fucking bullshit. Swipe it acrosst these nuts Benchmade! More like Bitchmade
@pjd8196 жыл бұрын
Wow hope you are paying Worksharp for stealing their sharpener.
@WordMadeFlesh7776 жыл бұрын
Pat Dorigatti did you happen to catch the company logo on the guys shirt that was demonstrating it?... you didn’t did you. It is a WORKSHARP rep demoing it. It’s made by WORKSHARP!
@mattkandel24496 жыл бұрын
Steve Baker with Worksharp. 5 seconds in...
@chocloditelensman4 жыл бұрын
Worksharp made this sharpener for benchmade and rebranded it. Happens all of the time.
@spikestoyou5 ай бұрын
Honestly hate this thing. Not intuitive at all and the logo on the face of it was poor decision