The 16h dry time is tough, but well worth it when you see the phenomenal finish. LOVE the LOTR intro by the way! That's awesome! lol
@SuperVassarBrothers7 ай бұрын
So I’ve been using Advance a bit more recently and I’ve been able to pretty easily get two coats on in a day. The dry times vary depending on conditions, but it seems to be getting a bit easier to work with. I’m glad you liked the intro 🧙♂️
@cherylrobinson3708 Жыл бұрын
I love this paint. I used it on my kitchen cabinets and no streaks or brushstrokes! Beautiful coverage. I did not use mineral spirits to wash brushes, just soap and water. Well worth the $$
@SuperVassarBrothers Жыл бұрын
It’s a great product. Thanks for watching!
@michaelm96212 жыл бұрын
You are so right about the recoat time, 16 hrs is killer amount of time. But the paint is so easy to use, covers well, looks amazing and is tough as nails. Love to use it on my cabinets for my rentals.
@SuperVassarBrothers2 жыл бұрын
It is a great product Michael. For a rental it would be perfect just due to how durable it is. Most guys go cheap on Rentals so kudos to you for putting something good there.
@Mtl1508 Жыл бұрын
Painters here used a hair dryer and or a floor heater to bury the drying time along.
@sixshooter33132 жыл бұрын
Seen a lot of DIY painting tips that all rated this the best paint for trim and furniture. I am so glad that I watched your video telling all the facts. I may try using a sample of this paint before I jump in buying a gallon.
@SuperVassarBrothers2 жыл бұрын
Appreciate the kind words sixshooter. You may be able to buy a quart, but not smaller than that. Have a good one!
@cwilks5592 Жыл бұрын
I purchased this for my new kitchen cabinet doors. Got all of the backs sprayed. Waiting for better weather to finish fronts. Paid $79 gal. Love it so far
@SuperVassarBrothers Жыл бұрын
It’s a great product for cabinets. I hope your project turns out well!
@e.a.r.91556 ай бұрын
As a 28yr. painter now working in a Maintenance dept (easier, same pay 😁) I was brush n roll painting an entire casino/ hotel/ admin offices/ (doors & trim only) with this when the 2022 shortages hit, was forced to use Scuff-X which is insanely awesome for certain things but did not bond very good.. (Only because I was going right over a previous shiny hard shell finish, couldn't use stinky COVERSTAIN.. so the doors would chip easy), So we forked out the money for "COMMAND". (BenMoore) CAN YOU GUESS THE WHOLE PLACE IS GETTING REPAINTED WITH 'COMMAND'..! SUPER FAST DRY TIME FORGIVING, EASY TOUCH UP, AND BONDS AS GOOD AS COVERSTAIN OIL PRIMER. (I used COMMAND on a Tommy lift truck gate with sand in it, and 15 toy hauler back door ramps.. It's like rhino lining..! ** I would've kept using Advance though because it was working fine, bonded good and had a hard shell finish.. Just get some air on it or it will run..!
@SuperVassarBrothers6 ай бұрын
Command is pretty sweet for certain applications. You’re right. That stuff will stick to just about anything!
@testticklehead2 жыл бұрын
Thank you so much you've provided so much important information. I've been painting professionally for several years but I wanted to refinish the cabinets in my home and came across this video. I have watched thousands of review videos on many DIY-Contracting products and I can honestly say that this is top tier. I just subscribed and look forward to watching the other vids you have posted.
@SuperVassarBrothers2 жыл бұрын
Thanks for the feedback and thanks for subscribing. We have big plans for this channel as in providing better content for fine folks like yourself.
@glennchuffo9589 Жыл бұрын
You don't need a mineral spirit rinse. Dawn dish detergent works. Advance semi-gloss is my go to cabinet paint due to the self leveling and beautiful, hard finish. The recoat time is the biggest drawback. Cabinet jobs always take us 3-4 days minimum, we then wait at least a few days for the paint to cure and harden before we reinstall everything.
@SuperVassarBrothers Жыл бұрын
I will give the dish detergent a try. We've been using hybrids more and I'm trying to keep my brushes looking spiffy. Thanks for the recommendation! I'm going to try that out this week🤙
@lfallon38292 жыл бұрын
I was looking for drying time tips for Advance paint. I currently have my first coat drying on my cabinets and I ran across your video. Literally the best and most "extra" intro for a paint video. I was hooked from the start! Ha!
@SuperVassarBrothers2 жыл бұрын
Thanks for the kind words. To be safe we do one coat a day. Good luck!
@michaelm96212 жыл бұрын
@@SuperVassarBrothers You are so right about the one coat a day, it's the worst thing about this paint, it takes weeks to paint my kitchen cabinets. But it's worth it, they look great, are easy to work with, and is renter-proof.
@gregkeeyako Жыл бұрын
They dry by loss of moisture. In humid areas takes longer to dry, dry areas will be faster. If you wanted to speed up drying the best idea is to use a dehumidifier. But you should wait the 16 hours.
@gary24752 Жыл бұрын
Research Cabinet Coat by Insul X that is owned by BM. According to BM it scored better in the pencil test than that paint.
@fairamir1 Жыл бұрын
I paint cabinets. I use Behr Dynasty. Great coverage and dries in 15 minutes for second coat. Also very very durable.
@SuperVassarBrothers Жыл бұрын
If it's working for you then keep on keeping on.
@michaeldupar9453 Жыл бұрын
Oh my gosh that intro is awesome! Great job!!!
@SuperVassarBrothers Жыл бұрын
Haha, I'm glad you appreciated it!
@TheRealNosferatu Жыл бұрын
A lot of people make a big deal about the cost of paint. I understand if youre in a very tight financial situation, but in the case of a full remodel, where the cost of your paint is a fraction of the cost of painting labor/total job, buying premium paint just makes sense. In a whole house, you might be using 2 gallons of trim paint. So if you spend, $20 extra a gallon (40 total) to get a a more beautiful finish, that will also give you better value over time, with regard to durability, it’s a no brainer. Even more the case on a cabinet job, where labor/paint ratio is ~90:10 or something. Trying to no avail to sell this mindset to my boss 😂 im a carpenter/painter/sprayfinisher for a GC in Long Island NY. Love the vids man! Hope all is well with you
@SuperVassarBrothers Жыл бұрын
I completely agree good sir. It’s especially worth it to get a quality trim paint. Pay a few extra sheckles and get products that perform well. Good luck convincing your boss! 🤦♂️
@gorillacookiesfv3135 Жыл бұрын
That opener was very ethereal...nice touch
@SuperVassarBrothers Жыл бұрын
Thanks! That took way to long to put together 😅
@Opinionsareallmyown4 ай бұрын
This paint was used by my husband on some VERY old, ridiculous-looking (think 60’s, plain-Jane) cabinets in my home and the finish is phenomenal. He used brushes and low nap 4” rollers to finish the doors - adding molding to make the doors shaker-style. After they cured : amazing! It was a true labor of love. With that said, I’m wondering if I use it to refinish furniture (a hutch and some side tables), should I wait the required weeks of cure time, then topcoat it with a poly? To add durability or would that be overkill? Thank you Jeremy, for these terrific videos and sharing your knowledge. ☮️ ✌🏼
@SuperVassarBrothers4 ай бұрын
Thanks for the kind words! To your question about painting furniture, you don’t need to do a coat of poly. Advance is a hybrid product so it has a fair amount of oil resins pumped into it. You can think of it like a paint that has poly built into it. Use a good primer, do at least 2 topcoats of Advance. Let it cure, then you’re ready to rip. I’d use the process and products I used in this video for handrails: The Secrets to Painting Your Handrails FAST kzbin.info/www/bejne/hGeUd2yBbsidpKM
@JaeJaesparklesmcgee2 ай бұрын
So I just used this paint 4 base high gloss in a bright cobalt blue on a huge piece of furniture. The furniture was stripped, sanded, cleaned with tsp, primed with PPG seal grip gripper tinted gray. I sanded after primer which went on amazing. First coat of this BM high gloss went on very streaky, which I expected. Waited 2 days and it didn’t level much. It’s dark in areas. Second coat went in today, it’s almost not sticking to the first coat, separating once painted. I’ve never had this happen and zero clue what to do. I’ve used this paint on a few other pieces and never had this problem
@SuperVassarBrothers2 ай бұрын
Hmmm, that’s odd that it’s not gripping to itself. You can try to scuff sand it between coats. I’ve also had a lot of success using the Corona Vegas brushes to apply advance. I’d start with scuff sanding and applying another coat
@patrickcullen27142 жыл бұрын
The rule of thumb used to be Benjamin Moore for interior and Sherwin-Williams for exterior. But that's changing, I do love the aura 4 exteriors as well as interior especially for the walls
@av8rbri4732 жыл бұрын
yessir. Have used the Aura AND the Regal Select and they both are super awesome for interiors. You get what you pay for is true here
@SuperVassarBrothers2 жыл бұрын
Glad you like them Patrick
@maryanna717012 жыл бұрын
3-5 days to cure sounds pretty good! The adhesion and coverage sounds really good as well. Too bad it runs… I had that problem in the house I just bought- the previous owner used semi-gloss on the walls (cringe)… trying to paint over with satin… we had a lot of drips 🥲 The price is a little high for me, but it is a premium product- so… Thanks for this video!
@SuperVassarBrothers2 жыл бұрын
Hi Mary. Thanks for the compliments. A less expensive product is Duration semi gloss from Sherwin Williams which we like a lot. (If you get the 40% discount the price is manageable).
@shure462 жыл бұрын
good grief don't paint WALLS with these paints ... these kind of paints (like Advance) are for trim and cabinets .....
@devdawg222 жыл бұрын
This is not wall paint lol
@gregkeeyako Жыл бұрын
Wait! You aren't using Advance on a wall are you???
@Benmeglei13 ай бұрын
Would love to see a gallery vs advanced comparison. I can’t find any at the moment.
@SuperVassarBrothers3 ай бұрын
That would be a good comparison. I've only done a test spray with gallery, so I don't have much experience with it. From what I understand gallery can only be applied with a sprayer. Advance you can spray it or brush and roll it.
@mjmason752 жыл бұрын
My go to trim finish paint is Aura semi-gloss, but my go to cabinet finish paint is still Satin Impervo oil (Advance satin in our #2 option if the customer prefers a non oil-based product). With factory finished cabinets (never painted), first we use a fast dry oil bonding primer (Zinsser Cover stain) since it achieves scratch resistance really fast and sands super smooth. Satin Impervo oil is better than Advance for cabinets as long as using a solvent based product isn't an issue.
@SuperVassarBrothers2 жыл бұрын
That's a solid move. I want to start incorporating more oil based trim based in our rotation. A lot of times the client wants the old oil trim converted to latex, in which case we'll use a hybrid or use BIN and then go over it with a standard latex. Sometimes I feel like it would just be quicker and better to just use an oil trim paint to start with. I'll give Impervo Satin a try. Thanks for the heads up!
@pickeringpaintscentre8308 Жыл бұрын
The Satin Impervo has a tendency to yellow fairly quickly. If you do a touch up less than a year later, you will already notice a difference in the colour, especially in low light areas.
@sewingqueenusaАй бұрын
Amazing professional information. Thank you!
@SuperVassarBrothersАй бұрын
You’re most welcome! Thanks for watching! 😁
@metman32 жыл бұрын
Some of the best information I've seen on this product. Thanks!
@SuperVassarBrothers2 жыл бұрын
Thanks metman. Appreciate the feedback.
@claudiamiller77302 жыл бұрын
Wish I knew about the mineral spirit rinse when I was painting my cabinets….it is tough to clean up brushes!
@SuperVassarBrothers2 жыл бұрын
Hi Claudia. We don't always use mineral spirits with Advance, but it does help. Advance is a brush graveyard. :)
@claudiamiller77302 жыл бұрын
@@SuperVassarBrothers …Ha-Ha! You speak the truth!!✔️
@number1pappy2 жыл бұрын
Ok I got the advance semi gloss in white for my trim. I found that the semi gloss in advance is almost full gloss! Compared to my old valspar white gloss the advance semi gloss has the same gloss. I went out and got the satin advance and it's perfect. To me the satin advance is the same as other brands semi gloss.
@SuperVassarBrothers2 жыл бұрын
Yes the Advance semi is a bit glossier than most semi glosses out there. We like the satin Advance a lot and are using on a job currently. Glad you like it! The satin does seem similar to other semi glosses, maybe a tad less sheen, but close in my opinion
@martingo26803 ай бұрын
I painted cabinets and never waited 16 hours. I just go ahead and 4 hours after. They're in my house and excellent conditions
@SuperVassarBrothers3 ай бұрын
Dry times can vary depending on conditions in the room. We've definitely managed two coats in a day with Advance.
@jamiedorsey4167 Жыл бұрын
Paint reviews AND LoTR nerdery?! You have my sub.
@SuperVassarBrothers Жыл бұрын
Thanks for watching and subscribing! Nasty stinking hobbitses!!
@patrickcullen27142 жыл бұрын
Another great review! I love the lord of the rings reference
@SuperVassarBrothers2 жыл бұрын
Nice pick up on the Lord of the Rings. Thanks for the kind words.
@e.a.r.91556 ай бұрын
Finish is great, it bonds really good, dry time good, touch up good, but boy.... If You don't have air flow cranking immediately after coating, There's no hope. If painted too thick this stuff will run from sea to shining sea..! It's best if you're an actual painter if using this product..!
@SuperVassarBrothers6 ай бұрын
Agreed! The satin seems to be a bit better with dry times, but you still gotta be careful of putting it on too thick or it’ll run for sure!
@nothingsimpostleble15932 жыл бұрын
Hey what's up man fellow painter here myself.. we use emerald urethane on our cabinets and trim work... never gotten any complaints and I noticed it drys really really hard.... If what everybody says is correct which I believe that, advance may be a little bit better and have more durability that's cool I don't really care I don't have the 16 hours of dry time and I'm not willing to take a chance of spraying cabinet doors and having them all run.... Nope not going to do it... I put in cup hooks on my doors and hang them up so I can shoot both sides... If I have to stand around and wait for drips they're going to happen regardless like yeah no not down for that brother
@SuperVassarBrothers2 жыл бұрын
Glad to hear you like Emerald Urethane. We like that paint a lot. We did a comparison video here kzbin.info/www/bejne/ZpzHiHqBes2Ljrc. We don't spray cabinets, and are thankful for your feedback about it. Always nice to get inside info about a product. Keep fighting the good fight my friend.
@fairamir1 Жыл бұрын
I have used it...4 hours to dry...too long for me . But it is a great paint.
@jrrojas90504 ай бұрын
excellent information! thank you.
@SuperVassarBrothers4 ай бұрын
You’re most welcome 🫡
@williamkaikai39242 жыл бұрын
If you remember the good old days when we used oil for all millwork satin impervo was tits this seems to behave alot like that paint and the finish is very similar spray like oil. Thanks for the info guy
@SuperVassarBrothers2 жыл бұрын
Happy to help William. I think they still have impervo. And yes the Advance does seem a lot like it. Easier clean up too.
@steviem52792 жыл бұрын
@@SuperVassarBrothers Satin Impervo is still around and that's what I love to use on woodwork and trim but Advance is very good too. I believe BM is phasing this product out but there was time a few years back that BM was phasing out the Satin Impervo oil and what they tried to do was introduce a Satin Impervo waterborne paint to take it's place. While it leveled out great, it was garbage, it wasn't durable, it did not cure hard at all so any bump would chip it and if you put tape on it, it would peal some of it off. Needless to say, Satin Impervo oil made a comeback and now they are doing away with the SI waterborne. It seems like what BM got wrong with the SI waterborne they got right with Advance.
@annmartinez73962 жыл бұрын
I have Sherwin Williams Classic acrylic painted on wood trim in a bathroom. Contractor did that as part of a bath remodel. We dislike the color. I have always used Ben Moore products in our house for 30 years but made a concession because contractor said they prefer SW. Gonna tackle the repaint myself. What do I need to do to the SW Pro Classic finish to prep it for Ben Moore Advance? I have used Ben Moore Advance on beadboard trim and woodwork in another remodel project I did. Thank you!
@SuperVassarBrothers2 жыл бұрын
Hi Ann. Thanks for the question. A light sand is all you need to do to the Sherwin Williams painted trim. The advance will stick to almost anything. Good luck!
@jackk28983 ай бұрын
I use UTE from emerald and have never had To use Mineral Spirits 🤔
@SuperVassarBrothers3 ай бұрын
I use a little bit of dish soap and then some hand sanitizer on the brushes that I use UTE with. That’s working pretty good for me currently.
@patrickcullen27142 жыл бұрын
I'm a Benjamin Moore guy. I grew up in the trade using Benny more
@SuperVassarBrothers2 жыл бұрын
Appreciate your honesty. We love Benny Moore for Exterior and certain interior paints. The Advance satin has treated us well recently.
@clintmannion55983 ай бұрын
There is a lot of hybrid paint in the uk now they leave a finish just as good as a oil based product probably johnstones is the best ive used
@SuperVassarBrothers2 ай бұрын
I’ve never heard of that brand, but I’ll check it out. And I agree, the hybrids have come a long way. We use quite a few of them in our work. 🫡
@clintmannion55982 ай бұрын
@@SuperVassarBrothers i dont know if they sell it in the USA but great paint every decorator over here swears by it
@jamkpa2 ай бұрын
Good info!
@SuperVassarBrothers2 ай бұрын
I’m glad you found it useful!
@jamkpa2 ай бұрын
@@SuperVassarBrothers Yes, in fact I bought it today to soon paint my kitchen cabinets.
@critchie2 жыл бұрын
This is awesome. “All shall love me and despair.” I bought an old house where the former owner painted over the old oil trim with a stingy light layer of latex… of course. No primer. And it peels, it chips, and when heated, pulls off the oil layer like taffy. So, now I shall suffer and despair. Will this product be OK to use over this mess? Maybe sand it, and then hope that this paint will penetrate through this mess and adhere properly? 🧙♂️ 🧝♀️
@SuperVassarBrothers2 жыл бұрын
Hi Carol. Yes "you shall suffer" :). The best you can do is sand off all loose paint, sometimes cut with a knife as well. Advance will be great for going over the oil paint. If there is latex paint still left over and you paint over it, it may peel up later if someone scratches it. We had a job the other week where someone painted latex over oil. We didn't scrape everything off, just the loose stuff and painted over it with a paint like Advance. It worked great and it wasn't a high traffic so it should be fine.
@gregkeeyako Жыл бұрын
No. You need to remove any paint not adhering well, do some sanding or use Krud Kutter, then use a bonding primer on the oil that is compatable with latex.
@mikegresham94242 жыл бұрын
It is a hybrid paint great stuff
@SuperVassarBrothers2 жыл бұрын
Hi Mike, we like the hybrids, especially going over oil trim or other slick trim.
@TeslaRules18562 күн бұрын
So for trim in an older home with kids and dogs - is the current Regal Select in Pearl really going to under perform compared to Advanced ? What about Scuff X ?
@SuperVassarBrothers2 күн бұрын
Advance would be the best in terms of durability once it cures. I think it also has the best finish of those products as well.
@TeslaRules18562 күн бұрын
@@SuperVassarBrothers thank you !
@johnanderson80962 жыл бұрын
Ive always thought of "open time" as the time you have to brush/ work the paint, before it starts to set up??? "drag" if brushing... which is critical in a review... some of these waterborne paints... are very close to being spray application only... Again?????
@SuperVassarBrothers2 жыл бұрын
Hi John. Thanks for the comment. Advance has a very long open time where you can touch up (more with the semi gloss than the satin). The reocat time is recommended for 16 hours, but you can recoat faster if you want to live on the wild side :)
@justinchrist37052 жыл бұрын
I get what your saying, I just used fine paints of europe eco, seemed like as soon as I seen a run it was also locking up, drove me crazy
@jessicabixler165822 күн бұрын
I find it take a month or two to fully cure fir high use
@SuperVassarBrothers22 күн бұрын
It does take quite a while to cure all the way through depending on drying conditions.
@donaldbryan1937 Жыл бұрын
It will not bond to oil paint unless you sand it to a really dull finish and it will bond better but if you have to paint anything over oil and it's not oil base paint, prime it first!
@SuperVassarBrothers Жыл бұрын
It’s hit or miss with the oils. Most of the time we use BIN shellac when we’re converting trim.
@chipdouglas9847 Жыл бұрын
Would like to know how BM Advance compares to Valspar Cabinet & Furniture?
@SuperVassarBrothers Жыл бұрын
I took a screen shot of your comment, and I'll add this to the list of products to take a look at. I've never used Valspar Cabinet & Furniture, but I'd like to give it a go. Also, your user name is excellent. "Let's leave these two lovebirds alone"
@chipdouglas9847 Жыл бұрын
@@SuperVassarBrothers I was a professional painter for many years and then ran a paint building supply paint department which featured Valspar. The product I mentioned is also a water based urethane hybrid paint specifically designed to dry hard. It's $10 cheaper a gallon cheaper than BM Advance available at Lowes and also recommends thinner at some point to clean brushes. What most concerned me about your review was the 'dripping' aspect of Advance. I plan on using the Valspar and I'll let you know what I think if you'd like.
@chipdouglas9847 Жыл бұрын
@@SuperVassarBrothers Hello, wanted to tell you I used the Valspar Cabinet and Furniture paint. It seems very good. We'll see over time how it hold up. Covers very well. Wants to run just like Advance so you have to be consistent applying it....;-) Had no real odor until after a few hours when it began to cure and then smelled similar to oil base enamel. It's a VERY thick product. The finish is very nice a couple days later. I can recommend it at this point. And, it's $10 cheaper. Food for thought.
@troycarpenter367510 ай бұрын
Thank you
@SuperVassarBrothers10 ай бұрын
🫡
@number1pappy2 жыл бұрын
I'm not a professional painter and my biggest concern is brush marks (roping) . In your opinion would this paint show less brush marks are would emerald urethane trim paint be a better choice? Price for me isn't a major concern as I figure I will only need two gallons of trim paint for our 1500 square foot home. I just want to use whatever paint there is out there that will give me the best results as I don't have a sprayer and I will be using a brush only for my trim. Again roping or brush marks are my top concern. Thank you!
@SuperVassarBrothers2 жыл бұрын
Hi there. If brush strokes are your main concern go with Advance. Just check for drips. It has a long open time and you can only do one coat a day. The leveling is fantastic. Happy painting!
@number1pappy2 жыл бұрын
@@SuperVassarBrothers thank you!
@claudiamiller77302 жыл бұрын
Used Advance on all my kitchen cabinets ( stripped to the wood, then BM primer) and the finish job is super at semi-gloss level. Hand brushed all parts but cheated on backs of cabinet doors and sprayed with…wait for it…Krylon craft paint. Waited a full week in humid NC between coats. Loooooong process but well worth it.
@JaeJaesparklesmcgee2 ай бұрын
I just used this in high gloss in a bright cobalt blue for furniture and it’s a disaster right now. Streaky not leveling, separating when painted on.
@cressdiligent3 ай бұрын
Any need for an extender? When brushing. Didnt catch if it is was hybrid. Woukd an extender work being an alkyd i think you said
@SuperVassarBrothers3 ай бұрын
Advance is a hybrid and it’s got an incredibly long open time. There’s not a need to put extender in it. If you’re having issues with it drying as you’re working with it then you’re probably over brushing and / or not moving fast enough.
@davidcannon510410 ай бұрын
Paid $5 per quart, got two, so $10 but not my preferred color. Small biz sells up-cycled paint for very cheap (all brands) but obviously you need to be flexible on the color. Once I paint the vanity cabinets, I’ll provide feedback. BTW, can I use Advanced with Wagner sprayer?
@SuperVassarBrothers10 ай бұрын
I have not tried that product through a sprayer like that. I’m actually using it in the field today on some handrails. I have a feeling it’s too thick to go through your Wagner.
@ac7384 Жыл бұрын
Would it be good to use emerald regular wall paint in semigloss for trim ?
@SuperVassarBrothers Жыл бұрын
A lot of folks do that and it’s a great paint to work with. It’s less durable than a product like Emerald Urethane trim enamel but sometimes that’s not a big factor.
@ac7384 Жыл бұрын
@@SuperVassarBrothers do I need to degloss trim if it’s semi and I’m going over it with semi regular wall paint ?
@ac7384 Жыл бұрын
@@SuperVassarBrothers is the emerald trim paint more glossier ?
@LG-sw1ge2 жыл бұрын
I have kitchen cabinets painted in latex that I plan on sanding well, do I need to use a primer before the Advance? I’m going from white to white.
@SuperVassarBrothers2 жыл бұрын
Hi LG. You should be fine to apply Advance with no primer. As long as you do two coats you should be fine. Good luck!
@Elevator2TheTop Жыл бұрын
Anyone have an update on how this paint holds up on kitchen cabinets after a few years? Particularly the satin finish....
@SuperVassarBrothers Жыл бұрын
It’s still one of the more popular products used to repaint cabinets. If it’s applied properly it holds up well.
@kostas_wellknown45192 жыл бұрын
You are perfection my friend! Greece!
@SuperVassarBrothers2 жыл бұрын
I'd like to think so. Flattery will get you everywhere.
@kostas_wellknown45192 жыл бұрын
@@SuperVassarBrothers you must to think so because you are perfection my friend! I am from Greece and i don't speak very well American language but i understand everything you say in this video! Thanks 🙏
@KickinChick062 жыл бұрын
Thanks for this review. I'm thinking about painting my kitchen cabinets with this paint. I'm wondering, though...if I paint the back/inside of the cabinet doors first, will I be able to paint the front after 4-5 hours without damaging the back that I just painted?
@SuperVassarBrothers2 жыл бұрын
Hi Alexandra. You should be fine if you wait 4-6 hours to paint the other side. Try it on one door and see how it goes. If it goes poorly just wait a bit longer until the one side is dry. Good luck!
@autohelix2 жыл бұрын
Try cabinet coat also made by Benjamin Moore.
@gregkeeyako Жыл бұрын
No way. Not possible. I did some doors. Put a drop cloth on a stack of them after I went to do another coat on others which was after 16 hours. Left a pop can on top of the dropcloth. The pattern was embedded into the paint. I'm even leery to touch the doors after 16 hours with my fingers as I might leave finger prints. I use latex gloves to handle the doors. I've recently sprayed about 12 gallons on doors recently.
@truthspeakerandseeker7032 Жыл бұрын
i just painted areas of my home using the ben moore line for the walls, trim and doors in different finishes, semi gloss for the trim,doorsbaseboards and eggshell for the walls and its been an absolute nightmare. for the trim and doors especially. the finished look is horrible. the brush strokes are so distracting and dizzying to look at, the drag while painting, the uneven altered sheens that came through, so many coats just to cover and even out the color and coverage and its not a smooth finish at all. i had a painter do the work and i bought the paint. ive used triple the amount of paint it seems and double the cost of labor. ben is not a cheap line either. but i cant stand the trim. the painter did not forewarn me about this and make any recommendations until after it was painted when i said ive never seen trim look like this. he then suggested i use regal or aura if i wanted that ultra smooth finish. never mentioned advanced until i started doing this research. the advanced sounds a little bit difficult with the drying time and the labor again. to redo the trim after what ive already invested makes me very frustrated and sick to my stomach because im so sick of dealing with this but i cant accept the trim as it is. ive used a bm line because of the color which is same color used in most of my house for matching purposes. besides the advance, is there anything else that you would recommend that would still be better than what i currently have? ive heard the aura is good for trim and could go easily over the ben line i used without any more prep work? im not so sure about using the advance even though it sounds exactly like the finished result i want. im also unsure about the prep work for using the advance to repaint the trim. the painter should know but i feel he should of known this beforehand as the professional which im not happy about. he is willing to make it right. im assuming with the advance you cant just paint over the ben paint i just used and it would not be that simple? does it need to be sanded and primed again? again, would the regal or aura at least make it look a lot better and closer to what i wanted? any help or recommendations you have i would greatly appreciate it. i have no idea at this point what to use, i just dont want to have the same issue again. its not only the cost, but the time and energy this has taken with horrible results. Thank you for your time
@SuperVassarBrothers Жыл бұрын
First off, I am sorry for what you’re currently experiencing. That is no fun. I would not recommend Aura or Regal for trim. We’ve been having issues with those products after they went through reformulations. Here’s my recommendation and feel free to take it or leave it: 1) Ask your painter what he prefers using and gets the best results with and have him use that. Most paints can be tinted to whatever color you want. 2) Try Emerald Urethane trim enamel in your preferred Benny Moore color. That’s our current favorite trim paint. 3) Try Command in a satin finish from Benny Moore. It’s very similar to Emerald Urethane and works really well. Lastly, if your painter can’t get the results your looking for with their preferred product or the other two that I mentioned, then you may want to try another painter. I hesitate to throw the painter under the bus because I haven’t seen their work. There’s my two cents for what it’s worth.
@ClaytonYatescarenthusiast Жыл бұрын
Hello thanks i feel like i can finally trust a review of this paint now. Everything else i watched is like a brochure. You said its not your go to trim paint, can i ask what is? And if you're doing more cabinets would this be your go to there?
@SuperVassarBrothers Жыл бұрын
Here’s our current load out including the trim paint we use: My New Paint Load Out // 2023 kzbin.info/www/bejne/mZbcn3iBiZqfpcU My buddies that do a lot of cabinets also use Emerald Urethane Trim Enamel which is our current go-to trim paint. Advance is good as well and plenty of folks use it on cabinets.
@fairamir1 Жыл бұрын
If it dries to the touch in 4 to 6 hours...why wait 16 hours for the second coat ? Soon as any paint I use is dry to the touch I immediatlely do a second coat.
@SuperVassarBrothers Жыл бұрын
Dry to the touch means that it won't come off on your fingers when you touch it. If you tried it you'd see what I'm talking about. After a few hours it won't come off on you hands, but it's still soft cause it hasn't cured all the way through. If you try and recoat too soon then the second coat won't go on well and the brush will drag. Then the finish will look like crap. We can get it to try faster using fans and the satin does dry quite a bit quicker than the semi-gloss.
@fairamir1 Жыл бұрын
@@SuperVassarBrothers I know what dry touch is..my question is if paint is dry to the touch after 4 hours....why would you wait another 12 hours to apply the second coat ?
@gregkeeyako Жыл бұрын
@@fairamir1 he just told you why. It hasn't cured all the way through the paint layer and you will F-up the job if you dont let advance dry 16 hours that's why. You can read on the side of the can. Benjamin Moore says to wait 16 hours. Of course you can do what you want.
@fairamir1 Жыл бұрын
@@gregkeeyako I always do my second coat as soon as the first coat is dry to the touch....average 15 minutes depending on the paint. You do not need paint to cure to do a second coat. Also it takes 3 to 5 days for paint to cure. I paint my second coat quaickly after the first caost. I have had no problems ever in 28 years
@gregkeeyako Жыл бұрын
@@fairamir1 if you say so. I wonder why manufacturers put those instructions on the side of the can???
@bluegrassdanq Жыл бұрын
the cure time for this is alot longer than 3-5 days
@SuperVassarBrothers Жыл бұрын
I'd have to check the can again. Good finish tho
@PandaG007 Жыл бұрын
Hello! I was suggested this product for trims as well. Have you seen how those trims looks after a couple of years? Are they slightly loosing the bright white becoming a little beige looking or tend to be more yellowish over the time? Thank you!
@SuperVassarBrothers Жыл бұрын
I haven’t noticed fading the trim we’ve done with this product. Emerald urethane might stay brighter longer, but I haven’t compared them long term.
@lisaw88632 жыл бұрын
Hi Jeremy, my kitchen cabinets have been stained but I would now like to paint them white with BM Advance paint, can I just sand the cabinets, or do they have to be stripped first?
@SuperVassarBrothers2 жыл бұрын
Hi Lisa, You don't have to strip them, definitely sand and you may want to prime them. We haven't done a project like that in a while so check with a good employee or manager at Benny Moore. A primer we like is the Zinsser B-I-N Shellac Base primer which you can find at Home Depot or Lowes. The link is below. The Advance will look great on the cabinets and I do recommend doing a test area if you can, to make sure it will be your desired look. Good luck! www.homedepot.com/p/Zinsser-1-gal-B-I-N-Shellac-Based-White-Interior-Primer-and-Sealer-00901/100398381?source=shoppingads&locale=en-US&pla&mtc=Shopping-BF-F_D24-G-D24-024_022_PRIMERS-Multi-NA-NA-LIA-NA-NA-FY21_Multi_LIA&cm_mmc=Shopping-BF-F_D24-G-D24-024_022_PRIMERS-Multi-NA-NA-LIA-NA-NA-FY21_Multi_LIA-71700000075826637-58700006498654198-92700058683659550&gclid=CjwKCAjwve2TBhByEiwAaktM1GCtB5feZckwMJouuH-IjW8JXZrgRYRH8OCsJBGX855Nkf_Lh6-5rhoCTNMQAvD_BwE&gclsrc=aw.ds
@lisaw88632 жыл бұрын
@@SuperVassarBrothers Hi Jeremy, thank you for the advice I will follow it.
@fairamir1 Жыл бұрын
Used a liquid deglosser
@gregkeeyako Жыл бұрын
Krud kutter first then prime.
@Avital44142 жыл бұрын
Brilliant Lord of the Rings intro!
@SuperVassarBrothers2 жыл бұрын
Thanks Rt L. Hope you had a great weekend!
@ptortland2 жыл бұрын
Nice review. You say that it’s not your go-to for trim paint; what IS your go-to paint for trim? (Oh, and I love the LOTR nod!)
@SuperVassarBrothers2 жыл бұрын
Hi Paul, appreciate the comment. We like Duration semi gloss from Sherwin Williams. Its a little hard to get at the moment due to supply shortages. Here's our video on it (It's one of our earlier ones, but people seem to like it). Have a good one! kzbin.info/www/bejne/l4KcY52nnsaeacU
@ptortland2 жыл бұрын
@@SuperVassarBrothers Thanks for prompt reply! On a separate but related note, I’m an avid DIY woodworker. Do you have a video that discusses HVLP sprayers vs airless sprayers? I’m not sure which would be best for my needs. And which models of each would you recommend? I build furniture and casework. But I may also be refinishing cabinets for my home. Thx!
@gregkeeyako Жыл бұрын
@@ptortland Advance has a hard time in my 4 stage airless. I have to thin it more than the recommended rate to get it through even with a big tip. I'm doing doors with my airless with a 310 tip and its spraying flawlessly..
@robertmcginley5977 Жыл бұрын
Have 30 y/o wood cabniets (Merrillat Amherts cherry - ie medium brown) don't have $$ to do replacments cabniets want to use BM Advance to paint a similar brown color. Can't find anyone that's done it. (know the trend is lighter paint colors but I like wood) Is that bc it will just look bad or just not trending now. Thanks
@SuperVassarBrothers Жыл бұрын
Most people that paint cabinets want them to look “painted”. The popular colors right now for painted cabinets are various whites, grays, gray blues and so forth. But if you like the color you picked out then go for it. They’re your cabinets!
@maranathaamen59632 жыл бұрын
What is your go to cabinet paint, and ceiling paint, andain't? Paint?
@SuperVassarBrothers2 жыл бұрын
We don't paint cabinets much. If I had to, Ben Moore Advance in satin or semi. Ceiling we like Promar Ceiling paint from Sherwin Williams. Hope this helps!
@ac7384 Жыл бұрын
What you reccomend for cabinets.? That’s paint
@SuperVassarBrothers Жыл бұрын
Advance or Emerald Urethane from Sherwin Williams. Those are two of the most used paints on cabinets right now.
@cobravenum2 жыл бұрын
I like the review you gave on the Emeral product, would that be a good pain to spray with an Airless sprayer from GRACO?
@SuperVassarBrothers2 жыл бұрын
Hi. We haven't sprayed the Emerald Urethane Paint so I don't have any advice for you on that. Good luck!
@av8rbri4732 жыл бұрын
IMO, most paints are sprayable with an airless sprayer like a Graco Magnum X5 for example. That’s the one I have and have tried several paints with it with great success. The most important thing is always the prep and the setup of how you will spray it.
@gregkeeyako Жыл бұрын
I'm doing doors right now with my airless with a 310 tip and they are coming out like the finish on a car. Took me a lot of trial and error though to get to that point.
@orozco532043 ай бұрын
Can i use over oil based paint?
@SuperVassarBrothers3 ай бұрын
Yes you can. Most of the time you can scuff sand the oils based trim and then go right over it with Advance. I’d recommend doing a test spot to see if you get a good bond. If it doesn’t bond well then you may need to use a bonding primer like fresh start or BIN shellac.
@Eagles25 Жыл бұрын
What is your go to paint for trim?
@SuperVassarBrothers Жыл бұрын
My current go-to for most applications is Emerald Urethane Trim Enamel from Sherwin Williams
@jaydee1772 жыл бұрын
I have heard that the Benjamin Moore Advance white isn’t ultra white as they have added black to it. Is this true? If so, what similar paint would you recommend for painting kitchen cabinets to have an ultra white finish while maintaining all the pros you listed in the video for Benjamin Moore Advance Paint?
@SuperVassarBrothers2 жыл бұрын
Jay, I haven't heard of BM adding black to the ultra white. Maybe I missed this, but we haven't had issues with it. We use Advance for other trim (we don't do much cabinet painting) and have had no issues with their whites. We like the satin finish in the Advance as well. Good luck!
@gregkeeyako Жыл бұрын
Seems very white to me.
@jaydee177 Жыл бұрын
@@gregkeeyako - yes, it does look white. It’s just not the ULTRA WHITE I was looking for.
@gregkeeyako Жыл бұрын
@Jay Dee when white looks whiter than white, it's because they add a tad of blue giving an illusion of being whiter. You can't literally make white whiter. I used to work at a BM paint store that my Dad used to own and that's what the Rep told us.
@williamkaikai39242 жыл бұрын
What is your go to trim paint?
@SuperVassarBrothers2 жыл бұрын
Hi William. We like Duration trim paint from Sherwin Williams. Our review is here. kzbin.info/www/bejne/l4KcY52nnsaeacU
@MrCaptainpope7 ай бұрын
So like a true amateur I didn't read the instructions. I assumed the recoat time was the same as benjamin Moores regal select and applied the 2nd coat after only a couple hrs. What do u guys recommend I do? As of now it seems ok. Do I bother adding a 3rd coat after waiting the recommended 16 hrs?
@SuperVassarBrothers7 ай бұрын
If you like how it looks then you don’t need to do a 3rd coat. We just used advance in satin this week and we recoated a few hours after we put the first coat on. Dry times can vary widely depending on conditions.
@MrCaptainpope7 ай бұрын
@@SuperVassarBrothers thanks so much for the quick reply. One more thing. Do u guys think a clear coat is needed as well?
@suleimankhader Жыл бұрын
Do you recommend waterborne for kitchen cabinets?
@SuperVassarBrothers Жыл бұрын
A lot of the guys that I know that paint cabinets like using Advance or Emerald Urethane Trim Enamel. Both are great options. Just make sure you're giving it enough time to dry between coats. Good luck with your project!
@danbalkey2580 Жыл бұрын
What I’d your go to paint
@SuperVassarBrothers Жыл бұрын
It really depends on what the application is. Check out the rest of our channel for my reviews of paints. I go over almost all of my favorites.
@Ed_Gein Жыл бұрын
Have you heard of Beyond Paint? Opinionn on it?
@SuperVassarBrothers Жыл бұрын
I’ve heard of it, but I’ve never used it so I don’t have an informed opinion on the matter.
@danbalkey2580 Жыл бұрын
I wonder if spraying would have to do vary light coats ?
@SuperVassarBrothers Жыл бұрын
If you are using a sprayer it's more about doing an even coat than a light coat. Generally you're going to end up doing two coats, maybe more depending on the color.
@gregkeeyako Жыл бұрын
Not very light but not too heavy either. Advance will run
@natallyfigueroa3098 Жыл бұрын
What primer works best with this paint?
@SuperVassarBrothers Жыл бұрын
That has more to do with what surface you are priming. Advance is fairly forgiving as far as what surfaces it will stick to because it has a high degree of adhesion. You can check out this video on what to prime if you'd like more details on primers: kzbin.info/www/bejne/o3a4i5SOhtWraMk
@homerogonzalez28742 жыл бұрын
What primer can I use with this paint???
@SuperVassarBrothers2 жыл бұрын
Most primers should work with this paint. Good luck Homero!
@irinamelamud59309 ай бұрын
Hello there. Do we need top coat over the last paint layer? Thank you.
@SuperVassarBrothers9 ай бұрын
I am not sure precisely what you mean by that. If you’re using Advance then that’s the finish paint. Once you put however many coats of Advance on your trim, doors or whatever, then just let it dry and you’re good to go.
@irinamelamud59309 ай бұрын
@@SuperVassarBrothers Thank you. That is the answer I was looking for.
@Ed_Gein Жыл бұрын
MDF is ok without primer?
@SuperVassarBrothers Жыл бұрын
I’d probably prime that before painting it. Not all MDFs are created equal, so I’d prime it to be on the safe side.
@joeydewitt46392 жыл бұрын
3-5 days for cure? I’ve been reading 30 days and I don’t want to wait that long. 😅
@SuperVassarBrothers2 жыл бұрын
3 - 5 days sounds right. It says so on the can. Forgot off the top of my head.
@gregkeeyako Жыл бұрын
@@SuperVassarBrothers can says optimal hardness 5-7 days.
@staceynelson6762 Жыл бұрын
I used this interior paint in my kitchen and it took no more than five days to cure. I love my cabinets and would use and recommend this paint 💯
@FourJaysFour Жыл бұрын
The deep, dark colors can still be tacky for up to 30 days
@shoreline8686 Жыл бұрын
Is primer required for bare wood?
@SuperVassarBrothers Жыл бұрын
Indeed it is. I'd recommend using a good Wall and Wood primer for bare wood.
@kristinrogersdotter54922 жыл бұрын
I have 90s medium tone wood cabinets I want to paint. It must originally been sprayed with some sort of polyurethane type factory finish but much of that has come off with wear, so about a year ago I used oil soap followed by Howard's Feed-n-wax. So my question is, do I need to prime before using the Advance paint? If yes, can I use Kilz which is cheaper? Thanks for the great video!!
@SuperVassarBrothers2 жыл бұрын
Thanks for the feedback Kristin. Tough for us to give you an exact recommendation without seeing your cabinets. I would recommend sanding and priming your cabinets just to be safe. Our favorite primer at the moment is the Zinsser BIN shellac based primer (attached link at end of comment). You could do a test area as well to make sure you like the finish. The Satin finish in Advance has a nice look. The semi gloss is good, but really shiny. Good luck! www.homedepot.com/p/Zinsser-1-gal-B-I-N-Shellac-Based-White-Interior-Primer-and-Sealer-00901/100398381?source=shoppingads&locale=en-US&pla&mtc=Shopping-BF-F_D24-G-D24-024_022_PRIMERS-Multi-NA-NA-LIA-NA-NA-FY21_Multi_LIA&cm_mmc=Shopping-BF-F_D24-G-D24-024_022_PRIMERS-Multi-NA-NA-LIA-NA-NA-FY21_Multi_LIA-71700000075826637-58700006498654198-92700058683659550&gclid=CjwKCAjw7IeUBhBbEiwADhiEMfRUQfOvL8KXuC6O_4lHL7nQUD9hr4tAxAHRU4h5TTxlrIWvxBKLWhoC4BUQAvD_BwE&gclsrc=aw.ds
@yolandavega67132 жыл бұрын
Hello I’m painting my cabinets can advance be used with a airless sprayer?
@SuperVassarBrothers2 жыл бұрын
Hi Yolanda. We haven't sprayed with Advance, but many guys do. On the side of the can it should have the spray recommendations. Good luck!
@gregkeeyako Жыл бұрын
It sprays wonderfully with an airless. I've experimented with a few tips and I do a beautiful job with a 210.
@gregkeeyako Жыл бұрын
I use a 210 tip 12" away 50% overlap. Slower than I though I would go and my doors are coming out with an automobile finish.
@gavcorang2 жыл бұрын
Was going to use this product to paint my stair railing, would you recommend for that job?
@SuperVassarBrothers2 жыл бұрын
Hi Corey. Yes Advance should work well. Also Ben Moore has another product we used a few times, but unfortunately I forget what it was called. If you go to the store ask them what they would recommend. May be a more industrial base. But Advance would work well too.
@SuperVassarBrothers2 жыл бұрын
Hi again Corey. I found out the name of the product. Its Super Spec Urethane Alkyd Gloss Enamel. Under their 'Maintenance Coatings' line. Good luck!
@gavcorang2 жыл бұрын
Thanks!!
@SuperVassarBrothers2 жыл бұрын
Hi Corey, One more thing...... For the Super Spec if you go with a lighter color such as a white it may yellow over time due to having polyurethane in the paint. We really like the paint for dark colors. Just wanted you to be aware.
@rockymtnmovies Жыл бұрын
It smells bad. It's been about three weeks and it's off gassing bad. Can't put the pantry doors in the house.
@SuperVassarBrothers Жыл бұрын
Advance definitely has an odor to it, as do all of the hybrids. It's not nearly as bad as an oil like Impervo Satin, but some folks are more sensitive to it than others. If you want to accelerate the curing / off gassing process then you can put them in a garage and run a fan on them. That'll scoot things along.
@tonyc7352 Жыл бұрын
What about sandability?
@SuperVassarBrothers Жыл бұрын
It dries hard, but you can sand if needed. We like the Satin finish a lot. Takes less time to dry as well.
@tonyc7352 Жыл бұрын
@@SuperVassarBrothers Thank you for your reply.
@gregkeeyako Жыл бұрын
I sand between coats with 220 and my doors are coming out with an automobile finish.
@tonyc7352 Жыл бұрын
@@gregkeeyako thanks for the reply
@garethdavies7564 Жыл бұрын
if its a oil base product it will go yellow in time
@SuperVassarBrothers Жыл бұрын
It's a hybrid, so there are oil resins in the formulation. From what I've seen it doesn't yellow as much as a traditional oil based paint like Satin Impervo, but even that is not generally a big deal.
@gregkeeyako Жыл бұрын
I did my trim 6 years ago. No yellowing.
@jackwardley36262 жыл бұрын
dont see the point in using these water alkyd paints might as well just stick with solvent especially cause you have to use turps still
@SuperVassarBrothers2 жыл бұрын
Hi Jack. Recently we've been having luck with just water clean up. Also the smell is substantially less than most solvent based paints. Some guys love the solvents and they do have their benefits.
@autohelix2 жыл бұрын
Water clean up is a big plus. In some States I don't believe you can even buy oil paint.
@jackwardley36262 жыл бұрын
@@autohelix alright surprised by that here in the U.K. thats all me and my guys use ive never used water paints on trim work.
@autohelix2 жыл бұрын
@@jackwardley3626 Certain States like California are very strict on environmental regulations. Paints that are high in VOC are not allowed, and well oil based and solvent based paints are very high in VOC.
@jackwardley36262 жыл бұрын
@@autohelix wouldn't want to be a painter in those states then.
@bluegrassdanq Жыл бұрын
forever to cure and it yellows
@SuperVassarBrothers Жыл бұрын
Agreed. The bright whites definitely amber out over time.
@gelipeone Жыл бұрын
soap and water ....thatts it
@SuperVassarBrothers Жыл бұрын
I’ve been adding a little dish soap and that’s been working well. Soap and water 🤙
@shure462 жыл бұрын
I didn't watch the vid , I just wanna say loved the thumbnail , "thou shalt not dry" ,,, hilarious .... and ain't that the truth .... I have a feeling BM may add some chemicals soon to remedy that because EVERYONE points that slow dry time out about Advance .... might as well us oil , and it does drag bad if you hit it too early
@SuperVassarBrothers2 жыл бұрын
Thank you sir. We'll see how the paint changes over time :)
@autohelix2 жыл бұрын
The purpose of this paint is it performs like an oil paint, but with water clean up.
@gregkeeyako Жыл бұрын
It acts like an oil and looks like an oil with the benefits of a waterborne paint.
@shure46 Жыл бұрын
@@gregkeeyako Ya I know , I'm a painter ..... Emerald dries ten times faster and is more user friendly ...... I have a vid on using Emerald
@gregkeeyako Жыл бұрын
@@shure46 this is super slow drying paint. I use stack racks. A few days ago a couple doors looked well flashed over so after about 5 hours I flipped them to do the other side. Then I stacked them. Well the paint ran and dripped in a few areas. About 3 days later I wet sanded and the paint more or less dissolved. Before that I took a sharp chisel and used it to cut off the drips. The surface was dry but under that there was still "gummy" wet paint. So its very easy to sand as the water I used turned into watered down paint. A very odd paint to use but once you get used to it is a great finish. Buy yeah. Primer and 2 coats on these 30 doors is taking forever.
@jdsjas2 жыл бұрын
NOT good paint I don't understand why people say BM Advance paint is great. I have been painting for years and it is the WORST paint I have ever used. It is nothing it says it is. It has no working time, does not lay off well, and does not level at all. Bought the prime and brush they recommend. I just did my new trim and all I see is brush marks. I returned the first gallon and tried a second, same poor results. I recommend avoiding this paint at all costs.
@SuperVassarBrothers2 жыл бұрын
Thanks JDS. Appreciate the feedback.
@Avital44142 жыл бұрын
What trim paint do you use, JDS?
@gregkeeyako Жыл бұрын
Must be a different Advance. I love this paint.
@jaydee177Ай бұрын
Too expensive!
@SuperVassarBrothersАй бұрын
It hasn’t gotten any cheaper since this video came out.
@sladeoriginal Жыл бұрын
Thumbs down for saying "hot minute"
@SuperVassarBrothers Жыл бұрын
That's fair
@javierchacone2 жыл бұрын
ABSOLUTELY HATE THIS PAINT!! Been a Professional Fine Painter for over 20 years. I tried this paint and must say, the paint seems thin and it doesn't work well if you are painting a light color over a dark one. It runs!! Even when sprayed, because the open time is longer than a regular paint time making therefore more time to run. I used a primer before applying this shitty paint. I wouldn't recommend it!! The Fine Paints from Europe costs a bit more but worth it. Cure time about 3 weeks, it will dry to touch faster than he says, but it will literally peel off in a few hours.
@SuperVassarBrothers2 жыл бұрын
Thanks for the feedback Javier. We have had good results with brush and roller with the Advance satin. Never sprayed it tho. We do use Emerald Urethane in semi gloss as well.
@robertcochran46122 жыл бұрын
I agree I've been in it 36 years and I'm not impressed with this video. I'm old school fresh start Benjamin Moore primer super semi-gloss enamel top coat for cabinets 💪👍 .
@gregkeeyako Жыл бұрын
Must be a different advance. I spray this with a 210 on trim and doors and love it. I must say it has a huge learning curve. I tried s lot of tips and pressures and did a lot of runs to get where I am. I've probably sprayed now 25 gallons of it and my doors are coming out like the side of a car.
@javierchacone Жыл бұрын
Did you spray on a spraying booth, with the doors hanging?? How many coats? Sanded in between? Because my experience was, even with a 800 grit sand paper, the paint would start to come off, this was after a couple of days. I used it 3 times and it behaved pretty much the same.
@gregkeeyako Жыл бұрын
@@javierchacone I'm doing 30 house doors right now. I'm spraying them on saw horses using stakracks.