Tap to unmute

SIGMA - DIY How To change door bailey channel rubbers

  Рет қаралды 31,448

Benny's Custom Works

Benny's Custom Works

Күн бұрын

Пікірлер: 123
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
If you’d like to grab some merch to support the channel check out www.bennyscustomworks.com
@wobblysauce
@wobblysauce 4 жыл бұрын
That louver...
@ukracer7593
@ukracer7593 4 жыл бұрын
My hoodie arrived a few weeks ago and we've had a blazing heatwave since so I've had no chance to wear it yet!
@VS666
@VS666 4 жыл бұрын
Skid Factory first, then BCW an hour later?! my inner monologue is going to have an Australian accent for the rest of the night
@2d540
@2d540 4 жыл бұрын
Still waiting for unicorn circuit tho
@Ward1706
@Ward1706 4 жыл бұрын
Strewth!
@Oldfatbeerman
@Oldfatbeerman 4 жыл бұрын
:-)
@mayhemjordy
@mayhemjordy 4 жыл бұрын
Check out torqhub too
@brendanf2705
@brendanf2705 4 жыл бұрын
unicorns up now haha
@Jim_M_75
@Jim_M_75 4 жыл бұрын
The mirror switch setup was clean as, really top install Benny.
@papapetad
@papapetad 4 жыл бұрын
Good to see you can get your hands on new rubber strips to replace old crummy ones. That kind of item can be a nightmare for restoration work like weather strips, door seals etc...
@BroomysGarage
@BroomysGarage 4 жыл бұрын
Like how this is coming along. Most other (decent looking) 70’s styled cars are completely unobtainable these days due to price (holdens, falcons, Mazda’s), but the sigma and scorpion still seem to be well priced (if you can find one). Always liked the scorps.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Thanks mate, a GE scorp just popped up in my hood on gumptree for a song, in barn find territory and yes the chrysler/ mitsu offerings don’t seem to be on the P plate write off radar so still really well priced.
@kenlangbridge9907
@kenlangbridge9907 4 жыл бұрын
Another great video. The ads though. I never knew I needed a plastic "blaster" rifle until I watched a five minute ad from tac toy.
@anthonywhelan8373
@anthonywhelan8373 4 жыл бұрын
Small hint when removing old brittle bailey channel use a heat gun to warm it up then it becomes half pliable again so it won’t break into a thousand pieces and yes been there done that
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Thanks for the tip :)
@wasabicars
@wasabicars 4 жыл бұрын
Good stuff. I dig those little JDM rain guards. Am a fan because my VK Calais had one, but makes sense why the rear louvre is going.
@JohnWood302
@JohnWood302 4 жыл бұрын
Benny, the door trim on that Sigma is almost identical to the trim design on my 1969 Fairmont! Same colour, armrests and carpet on the bottom with a chrome trim!! lol
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Yes they were designed locally, the jdm variant was different.
@Jeffball610
@Jeffball610 4 жыл бұрын
Window seals and channels aren't the most exciting parts to work on, but it's extremely rewarding when it's done. You don't quite realize how bad it is until you fix it. I did the door seals and window channels in my Datsun 510 last year and I was surprised at how much quieter the car was without rattling windows and wind noise through the door seals.
@trentwilliamson1926
@trentwilliamson1926 4 жыл бұрын
Saw you on ACA. You're a champ bro. Keep it up. Great person.
@TheTobes99
@TheTobes99 4 жыл бұрын
I love that you're not a Mitsubishi fan but love having some sick 70's JDM magic in your life How long til Turbo Astron?
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Will be NA astron 2.6
@Tuilaione
@Tuilaione 4 жыл бұрын
Love the upgrades to the old timers. 🙏🙏🙏
@jason35177
@jason35177 4 жыл бұрын
Great work there benny. I remember seeing these everywhere back the 90s 🙂
@detroitredwing919
@detroitredwing919 4 жыл бұрын
Benny I really like the black rubber on the bumper 💪I didn't think I would but now that you have it together looks good ✌Much love from Detroit 👍 THANX Great content
@anomamos9095
@anomamos9095 4 жыл бұрын
If you want to try and keep the channel as one continuous piece like factory, you use a hole punch to notch into the corners of a bend just clipping the deepest part of the channel putting the holes mostly to the sides then cut up from the middle of the hole bend the channel to the desired angle overlapping the rubber then either cut off the overlap or snip down the middle depending on the angle of the bend. Test on a bit of scrap first to determine how to cut it.
@aaronsmith8744
@aaronsmith8744 4 жыл бұрын
You should probably change the door and boot seals as well just for added protection. Rubber seals Australia are great! They should already have the sigma profile for the seals.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Just got a new old stock boot seal :)
@matthewtwright84
@matthewtwright84 4 жыл бұрын
I saw a US version of this car on facebook marketplace recently and thinking about Benny's car I considered being depressed for a minute that I couldn't afford it.
@lukerolfe2105
@lukerolfe2105 4 жыл бұрын
Such a sik cruiser Benny, love your work mate👌🏼
@MrKombiman
@MrKombiman 4 жыл бұрын
Benny that looks so sweet! So different to the ones in the day all on Dragway splats with chrome exhaust tips, pacemaker extractors and some dodgy weber carb with those chrome mesh covered air filters with some green foam in them and a no No Fear sticker! Great tunes too! Good to watch you work with. :)
@stevemcintyre4398
@stevemcintyre4398 4 жыл бұрын
Those were the days, relatively cheap mods as at that time Weber carbs that came standard on 2ltr Escorts were a dime a dozen at wrecking yards, add an adapter plate to the inlet manifold bolt on the Weber and voila, no need for re-jetting etc. It just worked. If you had money, twin DCOE Webers, port job and bigger cam and valves for some more HP and torque.
@MmeDesgranges
@MmeDesgranges 4 жыл бұрын
@@stevemcintyre4398 And now a 600cc bike makes much more horsepower. fuck it, a 250 cc bike makes more power!
@Hubsta_Evox
@Hubsta_Evox 4 жыл бұрын
Coming together really nicely Benny. 👍
@martyburgess341
@martyburgess341 4 жыл бұрын
Should add a pair of Rectangular Hella(complete with retro covers) Spotlights under the bumper ;)
@888johnmac
@888johnmac 4 жыл бұрын
ooh yes , perfect touch
@StratoJohn
@StratoJohn 4 жыл бұрын
The door louvres look mint
@Stungray22
@Stungray22 4 жыл бұрын
Those mirrors are mint 👌cant wait to see what it looks like with all the weather guards on the doors 🔥
@g_wizard9866
@g_wizard9866 4 жыл бұрын
Your car Benny, you do as you wish. Personally loving how its coming along.
@Rtechmobile
@Rtechmobile 4 жыл бұрын
Give Nathan back his Pad 🙂 Nice work Benny👍
@neilb6029
@neilb6029 4 жыл бұрын
I'd love a Sigma like that. Enjoy it Benny!!
@danielcarlucci5243
@danielcarlucci5243 4 жыл бұрын
Man watching this makes me want to actually work on my MX73... But then I remember all the widows don't work and it's raining
@rhysrhys2459
@rhysrhys2459 4 жыл бұрын
Great work guys. I have one myself and find these really easy to learn. Where did the metal side window louvres come from? Were the custom made or bought in? Would love to get a set for mine.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Rhys Rhys the louvres were secondhand from Japan.
@fo82rd12
@fo82rd12 4 жыл бұрын
Mint build Benny, not too sure on the steering wheel choice though... those 2.6 astron motors go well with a turbo and 5 speed conversion
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Interim wheel, new one coming :) the oem plastic one had sharp edges so slipped the red momo on until a more suitable one arrives
@jamesharris2788
@jamesharris2788 4 жыл бұрын
Beautiful car! Great work.
@madtechie.
@madtechie. 4 жыл бұрын
Benny, looks like the doors are missing the plastic liner behind the door card. Replace it if you can to avoid soggy carpet
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Will be replacing them with carbuilders kits.
@pablojones5613
@pablojones5613 4 жыл бұрын
Looking great Benny. Interesting how you have the Saturn 80 badge on the grille even though the old girl is running an Astron. I had a GE Sigma back in the day. It was a pile of junk compared to yours.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Pablo Jones yeah was just a cool yahoo find, if an astron one pops up i’ll swap it out.
@pablojones5613
@pablojones5613 4 жыл бұрын
@@BennysCustomWorks I own an MS112 Crown. Every time I go on Yahoo, my wallet craps itself.
@microbuilder
@microbuilder 4 жыл бұрын
I'd have to keep the louvers, but I'm biased, we had a 1980 Toyota Corolla SR5 with a louvered hatch when I was a kid. Loved that little red rust bucket...
@beardbuilds5140
@beardbuilds5140 4 жыл бұрын
How good is the Sigma gunna turn out ! What about venitians in the back instead of the louvre??
@craigmandall9420
@craigmandall9420 4 жыл бұрын
Venetians look awesome in this style of car
@nabelbinyameen1855
@nabelbinyameen1855 4 жыл бұрын
Good Job Benny keep going mate 👍BCw rules 😎
@paulthompson1654
@paulthompson1654 2 жыл бұрын
hi Using Bostik Vertical surface contact cement . Use this mainly on the 90 degree corners . Only need a small amount in 2-3 spots . Razor blade slots in the 90deg corners also helps .OR Many factory rubbers have slots /square window cut outs to allow flexing in corners . Lube roller runners ,, mechanisms with PH zinc grease helps alot . Did the bailey channel rubbers fit well ????
@CptMishMashVonRandom
@CptMishMashVonRandom 4 жыл бұрын
Add electric windows! 👌 I love old skool looks with subtle modern features. It'd be interesting to watch too.
@tommysutton9361
@tommysutton9361 4 жыл бұрын
@benny Where you get your imact driver socket set? I have searched high and low for them.
@HL-hw6qp
@HL-hw6qp 4 жыл бұрын
It’s that time of the week! 😎
@Ricky-nq7lu
@Ricky-nq7lu 4 жыл бұрын
They old girl will be thinking this is one hell of a birthday, what did I do to deserve this. lol Love it Benny .
@TheTobes99
@TheTobes99 4 жыл бұрын
Louvre is classic Aunger 80's AUDM accessories
@adamloader9534
@adamloader9534 4 жыл бұрын
Good stuff. Small improvements piece by piece becomes more of a build. I hope you get more excited one day and do a swap or add boost. But we know you have a race car. It's probably good to just have a running car that has cool mods.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Engine swap is planned, 2.6 astron with high comp snd twin webers. Manual also going in.
@bennyillest5508
@bennyillest5508 4 жыл бұрын
Those mirrors are mint! #bringbackthelouvre (nice product placment on the sticker too 😅😎)
@myfavoritemartian1
@myfavoritemartian1 4 жыл бұрын
Benny: Isn't there supposed to be a plastic sealing sheet between the door panel and the door to keep dust out of the car? All cars up here do. Thanks
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Probably, even if there wasn’t one oem we’ll be adding them using carbuilders kits when the new door cards arrive..
@888johnmac
@888johnmac 4 жыл бұрын
aah , i remember the days when most car doors were this simple , no electric windows , electric mirrors , central locking or speakers .. just that f**king clip that holds the window winder in place
@LobbyDaLobster
@LobbyDaLobster 4 жыл бұрын
THAT F*&#ING CLIP would never go back on properly! Or it would slingshot across the carport!
@JimPropert
@JimPropert 4 жыл бұрын
Those window handle C clips, some cars they are a **** to get off, lol.
@peteanderson2533
@peteanderson2533 4 жыл бұрын
What did you spray in the bailey channel please?
@TeamGambleBMX
@TeamGambleBMX 4 жыл бұрын
I had the same query. The internets seem to agree silicone spray is the thing to use.
@peteanderson2533
@peteanderson2533 4 жыл бұрын
@@TeamGambleBMX thank you, as luck would have it, I just bought a can of that stuff to fix the blinds in the house lol! (Worked a treat too).
@darrenrevill8664
@darrenrevill8664 4 жыл бұрын
Such a cool car.
@Roo0ooD
@Roo0ooD 4 жыл бұрын
Benny whats the part number for the baileys channel rubberr ?
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
roo dood not sure sorry, just got it from Clark rubber
@2burning2turning
@2burning2turning 4 жыл бұрын
I’ve been watching All Aussie Adventures.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Time to hit the road!
@ianvader4697
@ianvader4697 4 жыл бұрын
should put the water barrier back under the door trim to protect them
@frozenpete788
@frozenpete788 4 жыл бұрын
I believe the electric mirrors on my bimmers run off 3 wires also, and all the power distribution is done by the switch. I still have to source a dual electric mirrors switch for the 5 series. It came with no passenger mirror in 85", but the driver side is electric and no way to switch from one to another. Even funnier is the passenger electric mirror on a 190e w201 châssis, and the driver side is manual. Because Germans I guess 😂
@STREETCARCULTURE
@STREETCARCULTURE 4 жыл бұрын
Yesss Benny, loving the siggy
@frederickthorne2496
@frederickthorne2496 4 жыл бұрын
Sigma looks so sweet!.
@craigmandall9420
@craigmandall9420 4 жыл бұрын
I really wanna see the big block 2600 in this. Part of me wants to see her boosted but another part wants to see her stay n/a
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
I’m keen also :D will stay NA
@wobblysauce
@wobblysauce 4 жыл бұрын
The Astron was a ripper.
@aka_vinnyb3080
@aka_vinnyb3080 4 жыл бұрын
Most of the bailey and door belts on my capella were just moss
@TryHarderPlease
@TryHarderPlease 4 жыл бұрын
I'm very disappointed that you didn't clean those windows while you had them out... Shame on you Benny!
@leevancleef553
@leevancleef553 4 жыл бұрын
Ah the deflector. Now you can crack your window to suck durries when it's raining.
@jmyd83
@jmyd83 4 жыл бұрын
nice meer bro
@trout4x4
@trout4x4 4 жыл бұрын
Benny, you should have tinted whilst they were out, if your going to tint that is
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
No tint for this one .
@NormalKatastrof
@NormalKatastrof 4 жыл бұрын
Is someone else annoyed, that benny normally does everything 11/10, but now installed windows without cleaning them? 😂😂
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
NormalKatastrof half the glass is covered in silicone spray after the bailey channels are lubricated anyway so they’d just get dirty again.
@NormalKatastrof
@NormalKatastrof 4 жыл бұрын
@@BennysCustomWorks yeah, but the bottom half that was dirty and no one will ever see it, but you know that you left it dirty 😂😂 Its just my ocd kicking in. 🤭
@rolandduering8042
@rolandduering8042 4 жыл бұрын
Sorry Benny not a fan of those wing mirrors.still loving the sigma .scorpion next ?
@zigmacapucino6313
@zigmacapucino6313 2 жыл бұрын
Nice sigma bro
@4x4maximus
@4x4maximus 4 жыл бұрын
Love your work bro....but ohhhh you just triggered my OCD big time lol clean your glass n under trims before reinstalling lol drives me mad lol my theory is you have it apart you may aswell run a rag over it and clean up the area lol
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
It’s all coming off again anyway
@4x4maximus
@4x4maximus 4 жыл бұрын
@@BennysCustomWorks can't wait to see finished product. My mate in Perth back in 2001 had a sigma wagon with a 308 in it, was a weapon! Love the old sigmas
@alexreid8645
@alexreid8645 4 жыл бұрын
Ye ye!!
@TMWNN78
@TMWNN78 4 жыл бұрын
flog off those louves on ebay you can bet they are worth a bit unbroken
@YARCHLRL
@YARCHLRL 4 жыл бұрын
MAKE LONGER VIDEOS DAMMIT!
@i976scirocco3
@i976scirocco3 4 жыл бұрын
No vapor barriers in the doors or are you going to add them later? The louvers make the car man ! Chrome them to match the rest of the car.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
I976 Scirocco got some jdm door trims coming so will add them. carbuilders do replacement kits.
@i976scirocco3
@i976scirocco3 4 жыл бұрын
@@BennysCustomWorks Awesome man, I can't wait to see the new door cards.
@nismofreak33
@nismofreak33 4 жыл бұрын
God this look Soo sick. also booooo leave the louver lol
@michaelbeattie6953
@michaelbeattie6953 4 жыл бұрын
She's starting to look good bro. When does the barra go in?
@kamelialopez8356
@kamelialopez8356 2 жыл бұрын
In spanich please
@jonasthemovie
@jonasthemovie 4 жыл бұрын
Audio worse than usual. Alot of clipping.
@jubthreesixnine688
@jubthreesixnine688 4 жыл бұрын
Moist
@victorbitter583
@victorbitter583 4 жыл бұрын
I'd love to watch this but that music makes my ears bleed.
@slowrps13
@slowrps13 4 жыл бұрын
Please don't use this song again. Amazing channel btw love the content.
@Pete-z6e
@Pete-z6e 4 жыл бұрын
Victor Bitter , mop up all the blood with a tampon........should work perfectly.
@victorbitter583
@victorbitter583 4 жыл бұрын
@@Pete-z6e I got one in each ear champion. I stole them from your handbag.
@Foozefighter
@Foozefighter 4 жыл бұрын
im pretty sure saying the letter H has no reason to say hate involved in it fml
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Sorry, I don’t follow?
@deviatorst
@deviatorst 4 жыл бұрын
Those lock catches would annoy me, black one side and chrome the other.
@BennysCustomWorks
@BennysCustomWorks 4 жыл бұрын
Replacements already ordered
@deviatorst
@deviatorst 4 жыл бұрын
@@BennysCustomWorks I'm more amazed no one else noticed. Glad you are sorting if though, it's going to be a very clean car.
Sigma - HOW TO / DIY Sound deadening, underlay and carpet
16:51
Benny's Custom Works
Рет қаралды 37 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Ultimate Car Tips and Hack Revealed
5:01
Mr SunY
Рет қаралды 1,3 МЛН
Shed Talk - NEW How to fit an EH Bailey channel
7:03
Rare Spares Australia
Рет қаралды 17 М.
Corolla KE55 Build. Window Run Channel. Bailey Channel.
13:19
Blinki's Garage
Рет қаралды 3,9 М.
How To Install Window Rubber Run Channel
4:57
SteeleRubberProducts
Рет қаралды 6 М.
Benny vs Holden Commodore
51:41
Benny's Custom Works
Рет қаралды 6 М.
Shed Talk - How to fit a LH Holden Torana Bailey Channel
7:34
Rare Spares Australia
Рет қаралды 15 М.
Ford XP Falcon series - Shannons Club TV - Episode 32
14:38
Shannons Insurance
Рет қаралды 21 М.
How to polish aluminum wheels and what products I use
5:47
Andy's Auto Care Plus
Рет қаралды 1,1 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН