Detailed look at MX32 Ecodisc 6 m/s

If you would like to support my work....
/ benolifts
www.gofundme.com/beno-lifts
Please note: Please don't attempt to copy what you see in this video without understanding of how to do it safely. I don't mean to sound bossy or tell people what to do. I just don't want people to get hurt. Just from watching my videos will not give you all the knowledge required to safely enter lift shafts.
My best videos...
• Beno guides and inform...
URBEX videos...
• URBEX - Live sites aka...
Fun lift videos...
• Funny lift videos
Technical lift videos...
• Detailed look at lifts
Adventures around the world...
• Best of my adventures ...
Building sites and cranes...
• Driving tower cranes a...

[@hotmixer2010]

The ride quality is virtually unmatched by almost every lift company, KONE have really surpassed industry standards

[@AndrewG1989]

I am really enjoying your videos of different lifts, motors, power, tractions and the detail you give out about lifts.

[@TheLiftDragon]

These lifts are really next level! Absolutely epic!

[@Kooldown349]

In norway we have a kone MX100 in one of our tallest towers. I've sadly never ridden it since its owned by a cable manufacturer, but oh boy id love to see that motor room!!!

[@What_The_Fuck_Did_I_Just_Watch]

KONE makes really nice stuff!!!

[@herklegend4166]

Could you make a playlist called motors pls.

[@Internationalcartoons4063]

Wooowww! The interior is so posh and my... that is a fast lift.

[@Techno-Universal]

A ton of trams also use ABB DC pulsing and AC VF systems.

[@QEElevators]

Yessss! This finally got uploaded!

[@wisteela]

Those really are absolute beasts.

[@TemporalEngineering]

This is awesome!

[@Xenon777_]

Could you show more of lift lighting? - shaft lights and in car lights.

[@CrazyPlayer-pf2hv]

Can't wait to see the MX100 detailed look.

[@m4acollects]

10m/s?

[@ZLDSmogless]

And then the NMX 120

[@mrcocopop2423]

I love KONE Moters

[@joelvanhoye3622]

Hi Beno! Do you ever plan on revisiting Budapest one day? If you do I have some good lift recommendations. For example, a 1999 Thysen lift with a creepy chime. Also, there are a few trams and busses you might have missed.

[@adilhossain8198]

What about Japan? They’ve got LOTS of Mitsubishis that have a DOOR CLOSE message Even 1 lift has a DOOR OPENING message

[@Therobster87]

Excellent video Beno, is this bulding what we saw earlier with you penthouse?

[@qeelevators2960]

I bet. He said that he saw the motor room for that lift.

[@benolifts]

Or it could be a completely different skyscraper!

[@qeelevators2960]

@@benolifts bruh what

[@benolifts]

@@qeelevators2960 You do realize I don't just have one skyscraper to play in and call my home. I have several.

[@qeelevators2960]

@@benolifts you are sometimes confusing

[@matejgamingandotherstuff6484]

Go there with +Traktionsstromrichter who has an inductor recorder to analyze the VF drives

[@LAUCHGeorge]

Can you make that with MX 40 and MX 100

[@dinhtuan752]

ok

[@user-oe3sd4jk6f]

do Detailed look at MX100 Ecodisc , beno

[@gewitterstationirgendwo4008]

Interessantes Maschinchen

[@nelsonahlvik6650]

I wonder what the LCECPU/LCELOP would display for floors above 99 because it seems to only display 2 character floor IDs

[@benolifts]

LCE can show 3 characters on the indicator. On some indicators only 2 characters can be shown.

[@nelsonahlvik6650]

@@benolifts I am talking about the seven segment displays on the logic board itself. The middle two displays show the current floor ID, and the two to the right show the new floor (call), so what would happen with 3 digit floors?

[@benolifts]

I actually don't know

[@ThompYT]

@@nelsonahlvik6650 maybe it would use hexadecimal?

[@bassist3727]

エコディスクだから出力が大きくなろうとなるべく薄型になるように開発されてるんでしょうけど...もう普通の高速エレベーターの巻上機の見た目ですね😂　三菱のもこんぐらいな感じがします。

[@Internationalcartoons4063]

私もそう思います。😅

What is the strange thing attached to the counterweight at 11:35 ?

[@benolifts]

The under-cables. They are for maintaining the weight on the cab and counterweight the same as the lift moves up the shaft. All skyscraper lifts need this, or the motor will have very uneven load on either the cab side compared or the counterweight side when the lift is at terminal floors.

[@TheeSurfer]

It’s the screamer vf drive

[@contentdeleted142]

Beno Can You Try To Make A Video Of The MX80 Or MX100?

[@benolifts]

Not heard of a MX80

[@contentdeleted142]

@@benolifts oh ok That's an even more powerful one (the mx 80&100)

[@benolifts]

There is original series... MX06 MX10 MX20L MX20 2000s series... MX05 MX06 MX10 MX10(16) MX20 MX18 MX32 MX40 MX100 New series... NMX05 NMX07 NMX11 (N)MX14 MX20+ NMX18 MX32+ MX40+ MX100 There isn't a MX80

[@contentdeleted142]

@@benolifts Oh Now I Get It, I'm Dutch, And The MX80 Only Exists In The Netherlands!

[@Filmer-pn7jd]

@@benolifts Where's the MX100+?

[@whirlpool_addict_]

Hello Beno! What is an ACUM in a LCE?

[@benolifts]

Do you mean LCEACU? ACU is audio control unit. This is set by 3-3 where you can chose the message for each floor. 3-4 sets what should be announced. 3-5 sets the language. 3-6 sets the dual language. There are many versions of LCEACU. The basic version has 78 messages. The more complex ones have 255 messages in 37 languages.

[@windowsxpnt2347]

Hey Austin this is guys Roses are red I crashed in a ditch 6 meter a second ecodisc

[@AndrewG1989]

Hey Austin this is guys Expanded edition

[@benolifts]

Roses are red Violets are blue Ben got into the skyscraper As security was doing a poo Security came out the toilet But little did he know That Ben was entering calls in the cabinet The lift moved and security went "oh no!" Security came up looking. Ben saw the lift move and knew he must be quick. He saw security come to the top floor. "lets get away from this prick" But Ben couldn't leave yet. He hadn't surfed the lift. So he jumped on top it. And oh boy was it swift. Ben enjoyed his lift surf. And decided it was time to go. He had surfed one of London's tallest But security was not to know!

[@AndrewG1989]

@@benolifts That’s brilliant. Love that one 👍😂😂😂

[@Internationalcartoons4063]

@@benolifts Wikipedia: Beno (or BENObve or simply BENO) is the world's first best lift-surfing-poet-writer ever in Medbay. 😁👍

[@BM13590]

Hi

[@NIGHT_CORE_]

BENO!!! Excellent videos! Did you know pop singer Prince died of an overdose in an Elevator? Lolz

[@LeoPlaysMCElevators]

That elevator where he died is now an Employees Elevator.

[@Un-Grand-Central]

Lift shaft dangles?

[@benolifts]

6 m/s dangle time!

[@Internationalcartoons4063]

Looks like it's time for 'zero-gravity' again...

[@levigaming-1]

There’s just one question why not lift shaft why a motor room. Modded a lift?

[@benolifts]

Because it is MX32 (NMX era updated version). It goes 6 m/s at 1200kg. You aren't going to have that as MRL. I feel that the modern day 3 m/s at 1000kg MRLs that you now get (MX20+ and 5500) are pushing the limits of what is possible. There is no chance of a 6 m/s MRL.

[@hectorrenfe3359]

very very me scared floors to 0 floor

[@NIGHT_CORE_]

BENO Are you being exposed to dangerous levels of Electromagnetic Radiation around this Elevator motors?

[@wisteela]

Perfectly safe.

[@benolifts]

The motor windings operates at 25hz. The VF drive is at pulsing 10,000hz into the windings. These frequencies are far too low to be a problem, even when at high power.

[@NIGHT_CORE_]

@@benolifts That's great! Thanx 4 the videos. There very interesting and fun to watch!

[@rynndash]

Hey beno love your videos :) I’m donating 25$ Canadian on gofundme

[@reececollison5101]

I think Kone need to hire a mathematician don’t they? Shouldn’t two MX18s joined make an MX36?😂

[@TheDragonFire123]

Just because you double the motors does not mean double the power, exactly, due to inefficiencies in tandem driving. At least, what I think explains that.

[@hungrynapps]

They should have called it mx36.. lol

[@benolifts]

The MX numbers don't really make much sense. MX 40 should be called MX50. I estimate it does something around 1200kg at 8.5 m/s, 1600kg at 6 m/s, 2500kg at 4 m/s. And in 2:1 this would be 5000kg at 2 m/s. So MX50 is a better name. But after the NMX updates apparently it can now go a speed of 10 m/s (probably at 800 to 1000kg) So it should now be renamed NMX55 or NMX60. Kone really seem to be thrashing their motors a lot harder nowadays. I think the motors were more reliable than Kone expected, so they then thought they could push them harder to get more out of them.