KONE NanoSpace™elevator replacement process video

[@sautran1841]

0:00 Introduction 0:24 Site survey 0:39 Old elevator disassembly 1:55 Installation 2:30 Shaft components 2:57 Elevator controller 3:53 Hosting unit 4:11 Balancing weights KONE Nanospace More comfort in less time

[@express777100]

first time i have seen a nanospace lift installed. it is a lot easier and less graft than we had to do in the 70s and 80s with high speed passenger lifts.

[@blackkissi]

thanks youtube algorithm.

[@pekkajahkonen1308]

KONE refuses to pay anything to the inventor of this idea but puts a trademark and is marketing this revolutionary new hoisting concept.

[@caglarcaglar3307]

Türkiye'den ekip alımı yok mu

[@DerSolinski]

Ohhhh smart. If I interpret this correctly the counterweights are a bit overbalanced to coax a bit more payload from the motor since this seems to be push/pull. Elegant system.

[@alexandrehonorio8580]

Já fui montador da kone .é já montei ese tipo de elevador. Excelente equipamento.

[@valdenirsantos2587]

É é parece que o Kone está de volta ao Brasil

[@jacobsnodgrass1888]

For over 25 years my father installed elevators with Schindler, Kone, and Schumacher

[@Gregory-xy7pl]

Jak se Kone zbavuje lidí je také velmi zajímavé. Dlouholeté pracovníky vyhodí za to, že si dovolí pít kávu u zákazníka!!!! Jestli by nebylo lepší vyhodit vedení společnosti za korupci a předražené zakázky. Jste dobytek!!!!

[@KONECorporation]

Hi Gregory, thank you for sharing your experience. We take this feedback seriously and have shared it with our local team. If you would like to reach out to us, so we can better understand your concern, please also contact the local customer service team with your details. You can find their contact details from the local website: kone.com/en/local-website-selector.aspx. Thank you!

[@seth8982]

Then the pit gets water in it and wreck the machine.

[@Kufikwasf]

Was just about to say the same, Otis did this years ago and it was horrible.

[@LordVoltRod2c]

That's why you need a FitPit Elevator System.

[@Hyndaiz]

They say that the machine can survive subwater conditions.

[@NukeAttackWarnings]

There's pumps for shaft pits that pump out any accumulated water on the shaft floor preventing just that.

[@DJSpinSter2004]

That’s why bottom-drive systems aren’t made anymore in the US as far as I know.

[@doankara5672]

Great ideas and great solutions. Congratulations.

[@ZZ9ProductionsOFFICIAL]

This does seem like an interesting design of lift. :)

[@axexexel2672]

kone is number 1 in callback rate. next to otis and schindler. based on our building equipped with different elwvator brands😅😅😅😅

[@SumitIntrovert]

What about Johnson?😅

[@Tee.NZ.07]

Lol the amount of pits I've seen in water..... 🤔 Looks cool tho

[@ssaraccoii]

Exactly what I was thinking.

[@DJSpinSter2004]

That’s quite literally why this elevator doesn’t exist in the US and elevator companies stopped making bottom-drive systems. lmao

[@ElevatorCreator]

Honestly the rails and brackets they were demoing looked brand new still.

[@aegystierone8505]

Hmm this video makes it look so easy, those who work in the lift industry will know that the installation is far more complicated.....

[@QNY96]

Aegys TierOne if you know what you’re doing, nothing is complicated

[@shiladityaray92]

This is just to give you an overview.....

[@pissandcornflakes9119]

the elevator is larger than the doors and smells like 40 year old slim jims

[@vishalyawalkar5304]

Awesome technology nano space First time I saw this unic technology we hv seen monospace then mini space nano space experience of comfort

[@wizbang68]

Wish there was an option to not have the motor in a pit. Live in Florida and our community was built in the early 70's and the elevators need to be replaced. But, one of the issues is they need to get everything out of the pit due to tropical season at least once or twice a year flooding the pit area. As a result they have to shut down the elevators during any high rain periods to prevent the motors from being shorted.

[@SamSitar]

or have a second motor above the hoistway as a part time replacement.

[@615TNwilson]

They do have alternative options to counter your problem.

[@hectichorse]

The motor usually isn't stored in the pit

[@charlesmurphy1510]

wizbang68 what about a sump pump and pit?

[@1enterthedragon]

Depending on how many openings there is in hoist way of the new elevator, determine how long it takes to to build.. Not no 2 weeks from beginning to end.. No way..

[@Aawsomeguy]

When I saw the controller on the 1st floor right next to the elevator in a panel I then knew it was a MRL (Machine Room Less) system before the bottom mounted drive machine was even shown. They take much less power then the larger geared and gearless drive machines in a rooftop/basement elevator machine room.

[@matthewminnie4900]

Kone makes some nice lifts

[@LandNfan]

I know of cable lift elevators and hydraulic elevator for just a few floors. But I have wondered why elevators did not use a jack screw mechanism. I suppose the flex in the drive screw would be a problem with taller installations. Screw drive would be very smooth and quiet with little car fall risk except for major structural failure.

[@DerSolinski]

Screw lifts exist but only in very small industrial applications and then only with a very low head. They are *very* expensive to build and to maintain. Also slow as F. They are only one step up from gear lifts, yes with a rack and pinion.

[@wdowa94]

I hope that they already do know how often there is water and high humidity in bottom of the shaft?

[@anirbanmajumdar3118]

AS THE MACHINE IS IN THE PIT IT WILL CREATE PROBLEM IN RAINY SEASONS IN PLACES WHERE WATER LOGGING IS AN ISSUE

[@boeing747_24]

Kone elevators are so smart

[@hracing1204]

Hoist point is on the guide rails? 3.50. .? Grazy

[@chris746568462]

4:35 Why is the stator of the motor rotating...

[@ZZ9ProductionsOFFICIAL]

What types of buildings are these most common in?

[@donalddavis581]

Great idea until the pit gets flooded....LOL and I guarantee it will

[@dannybodros5180]

A marvellous piece of engineering, but it's concerning that both the motor and its control unit are located at the bottom of the lift pit. All it takes is one leak/flood and your motor is fried.

[@scottsliftsX1]

Who made the ecodisc lift voice

[@bakeandWake]

itll take two weeks for the other subs to finish power, fire, phone, masonry and plumbing once the install is complete...then u have to get on the inspectors schedule

[@akaleweledmesfin1049]

we have been expected more supportive treating from the company????

[@aquabestindian]

What would be the ball-park figure in INR for a six-story building?

[@ramsinghshyam7762]

Very nice 👌

[@maypek4803]

Can the air ventilation of the air flow be control . Example the speed and the qaulity of the AIR circulation from the ceiling at the time length to be control it or just by the setting selected time assess and access temperory or permanent by the controller technician or just by the setting computer machine generate auto only at a selected timing daily or weekly or monthly of the speed air flow circulation inside the lift of any ventilation guidelines to be learn and known and study.

[@KONECorporation]

Hi, thanks for reaching out. Please contact your local KONE team and they’ll be happy to help you. You can find contact details for where you are from the local website: kone.com/en/local-website-selector.aspx Thank you!

[@jessiebrown8843]

Since when is the motor room in the pit??

[@firesurfer]

When there is no room anywhere else.

[@upanddownadventures]

Very unique design.

[@Finntrans]

yes, it is. But I don't know if they're available in the US

[@elevatorsinrussia2597]

Finnish Liftours No they're not available in US.

[@aaronrennyvargheseOriginal]

@@elevatorsinrussia2597 rip, but I'm asian 😀

[@DJSpinSter2004]

@@Finntrans They’re not in the US, and for good reason too.

[@TheTheo58]

This installation looks similar to an Otis Gen 2 MRL with compensating sheaves top of the shaft guiding the rope from the counterweight of a 2:1 roping normally anchored to the top of the shaft, but over to the opposite (left side) of the cab. Right side ropes upwards to the gear-less machine's driven sheave to the compensating sheave on the counterweight. The elevators were recently modded this year, compensating sheaves were placed top of the cab, one each end. Hoist ropes were anchored on cab side, and counterweight side top of hoist-way.

[@mushroomcraft]

We hate Gen 2s

[@freddoflintstono9321]

So where does the safety break hide in this design (clamps the lift to the rails if it's detected to go too fast)?

[@brennangabriel1395]

Under the platform

[@kailashshukla2668]

What is in side momin size.

[@trainzinnit9232]

Is KONE nanospace good for a house??

[@rosssmith7237]

Yes

[@TheDragonFire123]

Likely not. These are intended for replacement of older lifts, not new installs.

[@Yogiblackforest]

Nice elevator

[@seanjuth]

I ❤️ you Kone!

[@elevatorsasansorler]

good job

[@kommusaidhu6913]

Nice job

[@Maloy7800]

TWO WEEKS!? That's "fast and trouble free"!? From the initial pitch I thought you'd say something like two days. How long does it take when it's "slow and troublesome"?

[@aaronrennyvargheseOriginal]

What did you expect?

[@nelsonahlvik6650]

Months.

[@hungrynapps]

2 weeks? 🤔😲

[@EroticHam]

hungrynapps no shit...where I work 1 elevator takes 6 months...

[@matix000]

Amazing!

[@gunplow]

Next generation elevator will be electric magnetic rail

[@max_dottie]

Well done

[@hracing1204]

Don’t let the shaft turn opened. Is dangerous for other people to fall in

[@MaxiYT483]

Imagine if it was only a elevator and no stairs, then they will be trapped up there for like three weeks

[@jimmyzhang4854]

what kind of software is it for design and simulate elevatror?

[@systemazsoyus-ng3ue]

well well amazing 😉 I love ihope be for ever

[@JitendraKumar-lh2uy]

Kone me complete kaise kar sakte contractor par

[@ekoharyanto5041]

Cool KONE

[@cryptoreno3282]

2 weeks? lol. Maybe in the test tower. The other trades have to get fire life safety, power, phone lines, etc. brought in. Plus an entire demo is a weekish. Imagine scheduling inspection before you even man the job.

[@KimmyAlburo3287]

We don't have nanospace here.

[@AnandYT00]

👌👌👌💪

[@jimmyzhang4854]

someone please tell me the software to design this stuff and simulation

[@vikramsingrathod7134]

Very Nice

[@elevatorsinrussia2597]

We don't have NanoSpace in Russia.

[@arvindip4395]

www.apson.co.in

[@temporalosm]

Who needs a machine room when you have ECODISC MRL’s?? And 100000x more efficiency with KONE?

[@Kris-yf7dt]

I ❤ lifts

[@deborahjohnson4234]

Phoebe Johnson 😎😎😎😙👍👍👍👍👍👍👍👍👍👌👌👌👌👌

[@mustafadasgin5765]

That lift is now 7 years old 😂😂

[@ElevatorFan1428]

Now 10 years old

[@hasibularif7715]

I work in a Shanghai Mitsubishi company, Bangladesh

[@Shivanyabhosale2020]

very nice

[@kakurerud7516]

i dont trust belts. seems like a system designed to have high maintenance costs.

[@one_step_sideways]

The motor is placed at the bottom of the pit, where the entire bottom gets flooded, of course it's a system designed to have very high maintenance costs.

[@SparkWater]

Job security

[@seanjuth]

Why isn't this available in the Americas? Oh I just forgot we are fat

[@wclifton968gameplaystutorials]

It's actually because the motors in the pit won't work there due to heavy flooding & storm surges

[@papesy4451]

Koné is very Nice

[@ats_arbitr]

Боюсь, что мусор, пыль и вода уничтожит это электродвигатель.

[@ambecement1855]

Price for 400 Kg

[@bakeandWake]

motor in the pit sounds like a recipe for disaster

[@Hotdoghunter55]

I thought Kone was pronounced as cone not connie

[@maizhanamoca9120]

Paano mga tao ma fit kasi narror imo na cab space. Ang 4-door lifts ang load ay 1600-21/ 2000-26

[@madhabbara8816]

Super Lift

[@ShubhamKumar-qx7cd]

Sir apply process Bata saktey Ho join karna hai company

[@thatdutchguy2882]

👍-up

[@Бекбосын-ф1г]

Өтте сапалы екен

[@bribriexcitementfuels4808]

Beno love you

[@seanblacketer]

Meanwhile mine still leaks

[@maxverschuren6858]

"Echo reel"? "Eco" should be pronounced the right way. Now "echo", echoes throughout the whole video...

[@nathan5508]

Why is this on my recommended?

[@metricdeep8856]

But more importantly......why did I watch it?

[@SaintSlon]

Ага все так красиво, что придраться не возможно) только в реале все не так как на видео особенно в Израиле! Демонтаж старого лифта идёт абы как! Демонтаж порталов полный ппц, открытые участки шахты не закрываются как следует тип на всю высоту проёма! А всего лишь ставят поддон и все! Так что даже ребенок может туда упасть.

[@SaintSlon]

А монтаж нового лифта, занимаются хаперы/ про рабы и т.д. выполняю свою работу на отеб.. лиж бы бабки получить! А сколько они косяков оставляют после себя! Потом приходится притягивать болты по всей шахте, и то смотря как еще выставят рельсы) ато еще ловите ли по всей шахте шарманку играть будет₪

[@TanweerAhmed]

Very good video #tanweerahmed

[@nasimelevatorservice2458]

👍

[@zapateena]

Their closed

[@mdikramkhan9412]

I need job in lift company Experience 8 year's

[@ahmedfekry135]

Ahmed Fekry

[@bestonweb3990]

send your cv.are you experience in MRL KONE [e-mail]

[@Keshavlifts1]

I work in rancon elev

[@beebee5633]

1:07-1:08

[@niqxtfn3403]

why did i come here you may ask well Kone is my name

[@danielserrano8600]

2 weeks from start to finish 😂😂😂 2 weeks maybe for the inspection

[@meenamuthukrishnan9488]

Get full comprehensive or else 💱💱💱💱💱💱💱💱💱💱💱💱💱💱💱........... Suppose any leakage in the pit

[@abena7590]

✅

[@finnishcruises7157]

Lol i got stuck in kone elevator Finland Tampere lol

[@eid-said]

جيد

[@umbertoamico9546]

Meglio un impianto tradizionale troppe pulegge.

[@Happyhayley1982]

IT NOT KONNE ITS KONE

[@fdsman]

I think their PR and advertising departments have it right.

[@ไม่ใช้มือเดียวออกห้าง]

Probably the same car as the

[@max_dottie]

Wow