Simply fantastic. The Deceleration is wonderful. Just as you would expect from an Ecodisc NMX or Schindler M. I have experienced the only real high-speed journeys so far in a coal mine and potash mine (18 m / s)
amazing vid! last month I found an overclocked orona lift. On the way down accelerated very quick but on the way up it literally accelerated like an MR traction lift! fortunately, I recorded it!
@What_The_Fuck_Did_I_Just_Watch3 жыл бұрын
2 of the nicest elevators in onw video, how amazing!
@The786legend4 жыл бұрын
Looks like great fun benno
@crazyleyland51064 жыл бұрын
I'd rather lift surf than do any official dangerous sport such as sky diving.
I just realized all lifts accelerate at 0.6 m/s^2 and the high speed ones at Taipei 101 achieve 1010 m/min in 17 seconds also by over clocking to 1m/s^2
@wisteela3 жыл бұрын
Some great speed there. And yes, what a great way to cool off during a heatwave.
@krist11124 жыл бұрын
Beno, I have a suggestion. You should check out the Royal Lancaster Hotel in Bayswater. They have a nice Mid-Rise Mitsubishi lift that goes 18 floors up. They used to be Otis.
@namhyeongkim_cos3 жыл бұрын
First I heard "overclocking" for electric motors. We usually uses that term for central processing units. However, we in Indonesia sometimes also "overclocking" internal combustion engines (usually diesel ones since it easier to overclock as compared with petrol engines). Also the overclocked Schindlers are too fast for a geared traction motors!
@Murph90004 жыл бұрын
Be careful upping the speed like that, even if the motor can safely do it. The shaft top & bottom overrun space may not be sufficient for higher speed. I.e. the physical vertical space between the limit switches and the building structure. A shaft designed for 1.0 m/s, for example, may be unsafe at 1.6 m/s with worst case car loading and minimum brake performance. That's not intended to be judgemental or scolding, just informative. Be safe is my primary message.
@benolifts4 жыл бұрын
I didn't increase the speed. There is a thing called a governor that stops you. m/s/s is a measurement of acceleration
@Murph90004 жыл бұрын
@@benolifts Ahh, my apologies, I misunderstood the video. It seemed like you were increasing both speed and acceleration. Anyway, stay safe.
@hotmixer20104 жыл бұрын
Would love to see a overclocked Japanese brand lift
@stavrinity83414 жыл бұрын
Mitsubishi
@stavrinity83414 жыл бұрын
Bruh. I rode a Orona today and the levelling is so slow compared to that Schindler🤣
@oscaroidacomedyfan31554 жыл бұрын
AYOS!
@Txepetxcc Жыл бұрын
Exactly how are they overclocked ? Speed setting in control panel?
@miahaskurti45394 жыл бұрын
Jackson Lift Group - We Need To Make The Kone Ecodiscs Worse
@theelevatorenthousiast-4524 жыл бұрын
Do you also leave them overclocked? I would like to see more of this
@iDrinkYourMilkshake4 жыл бұрын
they cant leave them overclocked because they didn't have permission to make alterations to the lifts settings
@theelevatorenthousiast-4524 жыл бұрын
@@iDrinkYourMilkshake lift surfing is also not allowed, and a liftengineer who maintains the lift wouldn't let them do those actions. So why he can't leave them overclocked, because i would🤔
@iDrinkYourMilkshake4 жыл бұрын
ElevatorStars - if you don’t have permission to make alterations have to restore it because the owner of the building hasn’t given permission for it to be left like that. Lift surfing and changing settings are 2 different things. With lift surfing you are not changing how the lift works, but if you change the setting you are.
@hariranormal55843 жыл бұрын
@@iDrinkYourMilkshake Yes and ben also many times did lift reprogramming of the voice and stuff to very funny stuff, so they DID say they always changed it back to its orignal settings after messing with it
@hungrynapps3 ай бұрын
How does one achieve this 😊
@Andrewjg_894 жыл бұрын
These lifts are quiet and bit more faster.
@ESF-ElevatorEnthusiast8 ай бұрын
How does he have the Permission to do this? I have an elevator drop key and I don't know if I can use it anywhere.
@benolifts8 ай бұрын
I don't have permission and have no intention of getting permission. It is not illegal to do something without permission (depending on what it is. In this its trespass, which is not a crime)
@salida_de_emergencia4 жыл бұрын
Does anyone know how I can get to the lifts of an office building without raising suspicions?
@iDrinkYourMilkshake4 жыл бұрын
confidence. if you are confident people will think you are meant to be there, you cant worry at all because people will instantly know you shouldn't be there, and there is no point worrying about getting in trouble because the only thing they can do is ask you to leave.
@salida_de_emergencia4 жыл бұрын
@@iDrinkYourMilkshake Thank you very much I will put your advice into practice.
@oscaroidacomedyfan31554 жыл бұрын
WALANG GANUN, MARS!
@windowsxpnt23474 жыл бұрын
hey austin this is guys
@wh0istim4 жыл бұрын
hey windows this is palm os
@LachieVidsTransportVlogs4 жыл бұрын
What is the point of this
@Andrewjg_894 жыл бұрын
windows xpnt will not stop posting the same thing and its now the most boring meme. Yp this bot needs massive help.