The Best Washer EVER to Buy May not be What You Think!

In this video, I discuss my opinions on various washer brands throughout the US and Europe, and try to give you some ideas on what machines to consider purchasing as well as avoiding. Additionally, there are a few things you can do to help give your machine a good fighting chance for a longer life, too. Maybe these tips will help you stay out of the laundromat like this one!
If you are an owner of an appliance, plumbing, or other trade business, consider downloading FieldPulse to help manage your service calls and estimates: bit.ly/3Hfqyt4
The master list of appliance model suggestions (from AppliancesConnection.com)
Top Loads:
Speed Queen TC5003WN: bit.ly/3FLLtm9 (Agitator)
Whirlpool WTW4950HW: bit.ly/3LNAE74 (Wash Plate)
Maytag MVW6230RHW w/ 5yr Warranty: bit.ly/3ZqSIY1 (Agitator)
Amana NTW4516FW: bit.ly/40t7BtF (Agitator)
Amana NTW4519JW: www.appliancesconnection.com/...
GE PTW900BPTRS: bit.ly/42ysqWl (Wash Plate)
GE PTW705BPTG: bit.ly/3Z9Uah5 (Agitator)
Maytag MVWP575GW: bit.ly/40cs06n
My teardown video for a similar Maytag: • Is the Maytag Commerci...
LG WT7150CW: bit.ly/3FMDeXa (Wash Plate)
LG WT7155CW: bit.ly/3JJm6me (Agitator)
Front Loads:
Speed Queen FF7: bit.ly/3ZqVpsB
Miele WXD160WCS: hbit.ly/3K30cfa
Bosch WAT28400UC: bit.ly/3JIMKvL
LG WM3400CW: bit.ly/3FIlGLK
GE PFW950SPTDS: bit.ly/3FLEc67
LG WM6700HBA: bit.ly/3JxgECY
Stackables:
Whirlpool WET4124HW: bit.ly/3M3Lnur
LG Wash Tower WKEX200HWA: bit.ly/3lFRWID
Bosch 24" Stack: bit.ly/3Za5pGb
Miele 24" Stack w/ Heat Pump Dryer: bit.ly/40cLY0M
Combo Washer/Dryer
LG WM3555HWA 24": bit.ly/40q96sk
LG WM3998HBA 27": bit.ly/3FIndS0
GE GFQ14ESSNWW 24": bit.ly/3FLKcMe
I'd have a Bosch/Miele link here, but can't find any in the US :-\
Other Links:
EBac: www.ebac.com/washing-machines...
Video Timeline:
00:00 - Introduction
01:23 - Are Front Load or Top Load Washers Better?
02:42 - Top Load Washing Machines - Agitators vs. Wash Plates
05:23 - Top Load Washing Machine Suggestions with Agitators
10:19 - Top Load Washing Machine Suggestions with Wash Plates
11:37 - Top Loads Brand and Models to Avoid
13:02 - Front Load Washing Machine Advantages and Disadvantages
15:18 - Front Load Washer Brands and Models to Buy
17:34 - European-Specific Brands to Consider
20:21 - How to Maintain Your Washer for Longevity
23:22 - Stackable Washer / Dryers & Laundry Centers
25:22 - Technician Survey among all Brands
26:33 - Owner Search Survey of What Brands Fail
30:15 - Washer Dryer Combo Units
33:21 - What Washer & Dryer Do I Own and Video Conclusion
You can buy appliance parts w/ a great warranty at: bit.ly/3pVxWyX
Like or Hate the Hat? Buy the Hat! bit.ly/3dtHHjE (The hat is NOT an endorsement of any candidate, party, or ideology. I am just a big fan of parody)
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

[@bensappliancesandjunk]

If you are an owner of an appliance, plumbing, or other trade business, consider downloading FieldPulse to help manage your service calls and estimates: bit.ly/3Hfqyt4 The master list of appliance model suggestions (from AppliancesConnection.com) Top Loads: Speed Queen TC5003WN: bit.ly/3FLLtm9 (Agitator) Whirlpool WTW4950HW: bit.ly/3LNAE74 (Wash Plate) Maytag MVW6230RHW w/ 5yr Warranty: bit.ly/3ZqSIY1 (Agitator) Amana NTW4516FW: bit.ly/40t7BtF (Agitator) Amana NTW4519JW: www.appliancesconnection.com/amana-ntw4519jw.html GE PTW900BPTRS: bit.ly/42ysqWl (Wash Plate) GE PTW705BPTG: bit.ly/3Z9Uah5 (Agitator) Maytag MVWP575GW: bit.ly/40cs06n My teardown video for a similar Maytag: kzbin.info/www/bejne/moeZoZ6PbdKUgs0 LG WT7150CW: bit.ly/3FMDeXa (Wash Plate) LG WT7155CW: bit.ly/3JJm6me (Agitator) Front Loads: Speed Queen FF7: bit.ly/3ZqVpsB Miele WXD160WCS: hbit.ly/3K30cfa Bosch WAT28400UC: bit.ly/3JIMKvL LG WM3400CW: bit.ly/3FIlGLK GE PFW950SPTDS: bit.ly/3FLEc67 LG WM6700HBA: bit.ly/3JxgECY Stackables: Whirlpool WET4124HW: bit.ly/3M3Lnur LG Wash Tower WKEX200HWA: bit.ly/3lFRWID Bosch 24" Stack: bit.ly/3Za5pGb Miele 24" Stack w/ Heat Pump Dryer: bit.ly/40cLY0M Combo Washer/Dryer LG WM3555HWA 24": bit.ly/40q96sk LG WM3998HBA 27": bit.ly/3FIndS0 GE GFQ14ESSNWW 24": bit.ly/3FLKcMe I'd have a Bosch/Miele link here, but can't find any in the US :-\ Other Links: EBac: www.ebac.com/washing-machines/range

[@rockjockchick]

Thank you!

[@petrhoward]

For transparencies sake how many of each brand were sold and what percentage of errors were matched to volume of sales for each brand?

[@888strummer]

The GE Profile PTW605BSRWS you mentioned at the 8:09 mark of this video is a white machine without an agitator, so you gave the wrong model number for the top GE Profile machine that you were talking about(you said a black model with an agitator that is large). But they have several black machines over $1,000; so it would help if you gave the right model number for the one you were specifically talking about at the 8:09 mark

[@josephheston9238]

I'd avoid any post-merger Maytag (since they're basically Whirlpools). The older Maytags were built like tanks.

[@sporkstar1911]

Yeahhh... the family vacuum cleaner was an Electrolux... from the 1950s... with that awful zeerust retro futuristic green design. But by god the bags were still available and that damn thing still kept going. And we had an awful "70s green color" refrigerator that the freezer kept frosting over, but it kept trucking too.

[@DH-.]

KZbinrs like you and project farm actually provide people a valuble service saving people money from low quality products

[@BealRutcher]

Exactly!!! ❤

[@w8stral]

Upvote! So true!

[@trevorrisley5419]

These gentlemen truly are incredible; doing a great service for mankind.

[@scottbrunner9569]

Came here just to say this. In the modern world of internet being filled with absolute junk, I wish there was more word of mouth to get these kinds of content creators promoted more.

[@NancyD2]

I walked into my local appliance store and said I want a washer that washes my clothes and won’t break. They pointed at Speed Queen. That was like 15 years ago. Still going strong.

[@waterfordsystems160]

Couldn't agree more. Ever since we put in our basic Speed Queen washer and dryer several years ago we've not had a single problem with either of them. No more costly service and repair bills. Don't buy anything but Speed Queen.

[@tomwakolbinger5116]

That’s exactly what our local appliance store told us.

[@lindamaskus5142]

My whirlpools are 20 years old. Just replaced the heat element in the dryer. I'll keep them forever as long as they last good.

[@SwervingLemon]

I had a speed queen washer and I wish I hadn't let it go with the house when I sold. I went to purchase a refrigerator and asked if there was a refrigerator brand with the reliability of a speed queen. "No. I mean, not really. No."

[@hytekrednekbama4400]

@@SwervingLemon sub-zero fridges are great, but you will pay for them$$$

[@aprilwomack3059]

This video! So glad I found it, saved me a bunch, BUNCH, OF CASH! The Amana 3.9 capacity I even found for over 300$ off so I saved even more! My current washer just keep going out of balance on spin and I am DONE with it. Googled average cost of repairs for the issue, 200 to 400 bucks and likely closer to the 400, so I just bought me a new one. Thank you for making this video. I reposted because my area just experienced about 5 F3 tornados and a lot of people lost a lot. That was last Tuesday 1/9/24. 5 years ago we got hit with a CAT 5 hurricane. We need a break!

[@InfamousKiddXD]

How’s your Amana going so far

[@aprilwomack3059]

@InfamousKiddXD husband and I were just talking about this like a hour ago! Frankly, I am shocked at the quality of this washer. I have a sheet I use in my SUV, that I load mulch and all sort of garden materials, and I gotta say it really STUNK! Yesterday I put it with my bed sheets and towels. It had no smell, looked very clean, as all my laundry has been. Since I bought the washer, my dryer died, I bought the matching Amana dryer and again I have to say I am shocked. Dries my wash quickly and even tho it's the same sheets towels blankets each week, even the lint filter removes more lint and pet hair than my old dryer. Plus I got a great deal on it also. I'm very happy with Amana!

[@lahaza6515]

The less frills, the better! I drove from NY state to North carolina to take my moms old washer & dryer. They're almost 20 years old and work FABULOUSLY! No digital, no phony magical promises; just basic wonderful appliances the way they USED TO BE. I'm loving your channel since finding it yesterday. So helpful. Love the dry humor too! And yes, "Nu Metal" like digital washers & dryers; will never compare to a simple, early Sabbath or Metallica song!😂

[@wholeNwon]

NEVER replace them. Almost all repairs are very simple. My washer lasted almost 50 yrs. The dryer is almost 60 yo and still works well.

[@lahaza6515]

Your comment made my day! Just to know that someone DID do it, that HAS kept their washer & dryer going that long, just gives me hope that I'll be able to hold onto mine as long. If people would take it seriously that you cannot over stuff them, pouring a bunch of crap into them that they'll last. @@wholeNwon

[@user-mo4mf9ox2l]

A wise move l to did the same thing .That was 25 years ago ,lv had the now 10 years this mouth .the only thing that went wrong was a belt on the dryer .5 months ago. Sir your right they work great l love them highly recommend them that's hot point bran.

[@lahaza6515]

I'm a woman, but you can call me "sir" if you like😂 But yeah, totally worth it to keep the older washers & dryers.@@user-mo4mf9ox2l

[@taroman7100]

And easy to work on. This digital board world sucks!

[@OrioleBeagle]

My brother-in-law is an appliance repairman. The last time he bought a new washing machine he bought a top loading Speed Queen. He made sure he bought a machine that had nothing computerized on it.

[@gregorymalchuk272]

Do the newest Speed Queens come with mechanical program timers or computerized controls?

[@booboo699254]

@@gregorymalchuk272 best I can tell, they are now computerized

[@markantony3875]

@@booboo699254 The electronics is made by Raytheon, a U.S. military supplier. They do not use cheap Chinese electronics like the big box retail machines.

[@evecarrington562]

Had an appliance repair guy at my house a few months back. He asked what kind of washer and dryer I had. I told him Speed Queens with the knobs and no electronics. He told me flat out "If you ever sell this house, take that washer and dryer with you. They are worth their weight in gold." Love my Speed Queens!

[@HotspotsSoutheast]

That's what I'm looking for. The Kenmore units I had were simple knobs, nothing fancy to wear out. Simple circuits. Will not be buying a new set with any of that fancy junk. Solid builds only.

[@thomasmusso1147]

Living in South Africa, bought a Speed Queen back in 1980. It is still going strong 40+ years later. Only repair required was the replacement of the drum main bearing about 5 years ago.

[@thomasmusso1147]

@SCOTT MILLER And you, snot kop, should get out of your Grandmothers Basement (or your trailer) and try and do something useful. Used from day one .. at the very least two loads per week.

[@thomasmusso1147]

@@mjngp You will not regret buying it. Keep it clean and maintained and it will not let you down. Not the most economical regarding water usage but it will wash just about anything. If water is a problem, harvest rain water.

[@maxcactus7]

That is absolutely epic! Legendary, in fact! Got your money's worth out of that machine several times over. I LOVE hearing such stories, as I believe this is the way all tools & appliances should be made, much like Toyotas that last 1M miles (1.6M km) You legit need to send that story and photos of your machine to SpeedQueen!

[@isleofskye0707]

My mom also had one - bought in the 80's and only replaced it in 2018

[@Ceares]

This is honestly one of the best videos I've ever seen on KZbin. Well researched, incredibly informative, easy to understand, funny and immensely helpfu. All the kudos to you.

[@tiffanyjames7150]

I had a Kenmore Washing machine for 25 years, bought in 1989. It was still working when I decided to buy a new Kenmore…..big mistake. The new Kenmore had a lock on it, no agitator. It would get off balance and walk itself out of place. It locked me out one too many times. When I stayed up one evening babysitting the stupid thing, trying to get it to spin my clothes dry so I could put them in the dryer and go to bed, it was time to dump it. I took a magic marker and wrote, “I am a sissy” on it. My husband insisted I needed medicine for my bazaar behavior. I came home from work to a wonderful $900 commercial grade Speed Queen (top loading, agitator). It is American made with a giant stainless steel drum! It was so much like my original Kenmore, only better. Love it!!!!

[@beekind6267]

Ugh...I'm sorry 😞

[@mainj54]

I have a 40 year old Maytag washer. Simple, reliable, easy to service.

[@info781]

Never replace an old Maytag if it works.

[@vaughnmichael5114]

We bought our Maytag washer in 1989……..still works great!

[@mandograssable]

I have one 44 years old and still going. I love it!

[@kendavis1198]

Had a GOLD one back in the Day, 3 Settings for Wash Cycles.Only Real Issue we had with it was the TUB SEAL, and Dad took care of that, and One Timer assembly.

[@MaryWehmeier]

If you can get parts. I had that problem.

[@JohnnyBfromPeoria]

Whirlpool tech for over five years in the Phoenix, AZ area here. I bought the second most basic Speed Queen top loader I could get at the time (a few years ago). It sits in a semi-outdoor area, covered from rain, should it occur, works perfectly. If I had bowling balls and bricks to wash, I'm sure it would survive. Buy once, cry once, it's worth it. Fills all the way up, too.

[@MapleMan1984]

@@wanderer397 Braindead.

[@badgermoon9229]

Bought a Speed Queen washer and dryer several years ago. My take on it is the other brands look great, the Speed Queens work great.

[@andrewdreves9076]

Agree! Bought a Commercial Speed Queen washer and dryer and that was 7 years ago. Still going strong. It is basically the same machine as in the laundromat but without the coin box.

[@Rnjeepshoelver]

I love my Speed Queen top loader , never get another kind of washer ( or dryer)

[@shadowopsairman1583]

Wait till it fails, better off replacing it

[@CrepitusRex]

We bought Samsung w&d and have regretted it. It was almost a month right at the three year warranty period we started having problems. There's only the wife and I and we're retired. So they've not seen a lot of duty. I'm lucky to be able to do the repairs myself. It's been 5 years and the washer is acting up again. It'll be Speed queen for us next and I'll probably be able to pass them on to my son. Great video thanks!

[@barbaramazzocca4605]

They make great TVs!

[@valeriedevereux5912]

Mine lasted just over a year. And I am a single woman, no kids.

[@winstonelston5743]

SQ TC5-series will last longer than I expect to.

[@kathysyphrit5713]

In the 70's I was given a used Speed Queen and I am still using the washing machine .

[@robertdavenport7802]

We bought Speed Queen top loaders from our local appliance store for two houses, combined 12 years of fairly heavy use with zero problems. Love the old fashioned manual controls and they do a nice job cleaning.

[@yolo_burrito]

We went with the Front Load 7 series Speed Queen and it’s fantastic as well. The pair wasn’t cheap but they are fantastic.

[@FirstLast-tw1qf]

Just bought a SQ tr5 hope mine lasts as long as yours

[@mitchk2981]

I had three high tech one’s fail and the repair costs of the computer chips were almost as much as a new one. I called a local family owned appliance store and asked them for one that would last and without hesitation they said Speed Queen. 100% correct. Made like a tank in the USA. Simple to use. Hot water and agitation. 12 years and zero problems.

[@dregenius]

@@mitchk2981 I had an LG TROMM at my old house that lasted 13 (before i moved, I'd imagine it's still there), and it not only cleaned better (this is proven by every major review and testing publication) than the top-load boat-anchor that came with my new house, it saved me about $5,400 in electricity (both to run, to heat the water, and to dry the clothes) compared to if I had owned a "classic" top-loader for that amount of time.

[@Dive-Bar-Casanova]

Nice but Speed Queen usually doesn't honor the warranty if their are issues.

[@lorifram974]

Bought a Maytag 108 new in 1979, it’s still chugging away, only problem was a set of belts in the 80s and my son replaced them with car belts - he’s a car guy -. Now I need the bit that regulates the water level, but apparently that part has not been made for 30 years, - so, don’t know whether to replace or not. At 86 I’m wondering, who’s going first, me or the Maytag. I have a chair and a book in the basement and I set the level at med., and babysit - works for me. Thanks for the video, gives me some ideas,now if a speed queen came my way -- ! !

[@beckyd712]

*The BEST washer I've ever had (and I've had a few) was an old Maytag Top Load Coin Operated Washer. (think Speed Queen)* I popped out the coin box and used the same coins every time. The Maytag commercial washer held more clothes, washed better than others and mechanically outlasted 3 other washers bought new and used by relatves and friends during it's lifetime. *PS I know what the stats say, but newer washers without central agitators just DO NOT clean clothes as well as older washers with central agitator.*

[@service1956]

My wife and I built a new house and moved into in June 2022. About a month before the move, I considered getting a new washer and dryer and leaving the old at the old house. So I called a reputable dealer that sells and repairs appliances in my area. I told him my situation that I wanted to buy new for the new home. He asked what the old one's were. I said that they were both Whirlpool bought new in 1989. He told me that what they make now are not as good as my old one's. He added that they could very well last another 10 years, and parts are still available. After hearing that I decided to keep them!

[@caliberhomeinspectionsllc5914]

Watching these videos, I decided to get the Speed Queen TC500 series set. We wash about 5 loads a day and so far it has been a workhorse. To validate your point about commercial washers, my family ran commercial laundromats for 30 years. And I kept two double-loader LaunderCenter washers when I sold the last store back in the mid '90s. I bought those washers brand new for that store back around 1977. They are both currently still in my house in NY and both are still running. Have not broken down once in about 46 years. There really is no comparison between real commercial washers and dryers to residential ones.

[@heyheyhelen931]

After replacing washers it seems every 7 years, I invested in a Speed Queen washer & dryer. Yes it costs considerably more but it came with 10years parts & labor warranty. Speed queens are suppose to last 20 years. We’ll see. I’m happy with my purchase- no issues , 3 years out.

[@231mac]

Got some more good news, they're actually rated for *25* years.

[@heyheyhelen931]

@@231mac Fantastic!

[@a4000t]

mine is 15 years old and still going,no issues so far.

[@steve8803]

@@231mac You'll probably sell your house before 25 years anyway, then the new homeowner will own it!

[@grazz7865]

I had an LG with a 10 year guarantee. Bearings went 10 years and a few months later. Typical 😑

[@XenobiaF]

I’ve had a Speed Queen washer and dryer for several years and have had no problems with them. I didn’t want all of the bells and whistles, I wanted something that would last. It has! And yes, I bought it from an independent store that services what they sell. Never had a need to call them for these machines.

[@jtrindle9383]

They recently moved to Mexico, add reduced their warranty length

[@Denise-rz4ug]

Stay away from the digital appliance use the simple knobs, wash and rinse and 5get touchtone,like the cell phones. Less is better

[@dcam456]

@@jtrindle9383not true. Still made in the U.S.

[@imjustvisiting5397]

😂Your sense of humor. What a fun handyman you are😂

[@seancoons44]

The Judas Priest and Iron Maiden references were awesome!

[@stuartstuart866]

Our top load Speed Queen has been very reliable. It’s a little more expensive than some other brands but it’s just a workhorse with metal gears instead of plastic and made in the USA. The controls are very basic and it might not have the energy / water efficiency of other models but the trade offs are worth it.

[@andyroid5028]

*_That 'water efficiency' crap is such a scam, IMHO._* _There is NO shortage of water. I pay for the water... therefore, let ME decide how much/how little I want to use. Meanwhile, there are idiots walking around wearing smelly (yet supposedly clean) clothes that weren't 100% cleaned because there wasn't enough water to wash (nor rinse) them properly._

[@nauy]

@@andyroid5028 Totally agree. Even worse are those stupid low flow toilets. They’re absolutely horrible. You have to flush 2 or 3 time for #2, totally defeating the very purpose of their existence.

[@andyroid5028]

@@nauy _Agreed. I absolutely _*_HATE_*_ those silly 'low flow' toilets. It reminds me of those 'no-spill/carb compliant' gas cans that we now suffer with._ With these newly designed gas cans, I now spill WAY more gas than I ever did using the old supposed 'dangerous & spill-prone' gas cans that are no longer being manufactured. _And it's all because the plethora of idiots that represent our stupid federal government... think they always know what is best for us. Yeah right. All they really know how to do (and w/out ever failing... not even once) is to waste taxpayer money often & at every chance they get._

[@cedricjackson7521]

I have used speed queen washers at laundromats for years They are the most reliable

[@Ronaldo-nj9pi]

I have never been so displeased with my top load whirlpool from 2022, has an agitator but NEVER fills up enough to use it. Clothes come out with dried dirt, even on deep fill. It only works when you put 3 articles of clothing in the thing. I have to hand scrub the dirt off my work jeans, there is just no agitation, and no water (I bypassed the safely lock on top to observe). People say "oh todays detergents are so much better, you don't need that much water, you're overloading the machine." My retort, ITS NOT DIFFICULT TO FILL WITH WATER, SHAKE THE CLOTHS, AND RINSE THEM." Why is this stuff being reinvented to be WORSE? DRIVES ME NUTS.

[@ohiofarmgirl3384]

My husband thinks I’m weird because I look forward to your videos and we’re not in the market for new appliances😂. BTW, I have Speed Queens TC5 washer & DC5 electric dryer. I didn’t want all the bells & whistles yet they do a fantastic job. Had Kenmore front loaders for 13 years and hated the washer. I was so glad when it finally broke past being worth fixing.

[@robertc.6441]

Appliances are a acquired taste, and fascinating machines to understand and like!

[@tylerdejohn4414]

Hey, I have had the tc5 machine for 2 years as well. My wife and I love it. Was thinking about getting the matching dryer. Is it worth it? Is their anything you like or dislike about it? Thanks!

[@ohiofarmgirl3384]

@Tyler Dejohn - I really like the dryer and felt it was worth the price. I’ve had my set since Nov 2019. The dryer is nice and basic and exactly what I wanted. It is also quiet. My laundry room is directly off kitchen and I have no door. It dries most everything during the first cycle but do have to readjust my queen bed quilt and put in a bit longer. It’s just very slightly damp the first cycle. It always dries my queen blankets first round though. The quilt is thicker. I wash bedding once a week.

[@jenscheibner792]

In the 67 yrs on this earth, I find the more basic the better in appliances. I did go all out and get another ice maker, but it is in the bottom not in the door.

[@andyroid5028]

*Dang. 13 years of sufffering? Wow. Sorry to hear that.* _In re: to front load washers... I never liked not being able to just put about half a tub of hot soapy water in it, just to soak some clothes for as long as I'd like to. Will the TC5 allow you to manually soak clothes for as long as you want?_

[@michelethompson7300]

I've spent a chunk of this last week and most of today trying to discover best washing machines period but most of all at my price point. Most of the info out there is all over the place. I feel fortunate to have come across your video that was most comprehensive and I trust more than anything I've seen in this last week over many hours of info searching. Subscribed! Thank you!

[@michaelrief4424]

I have a Speed Queen washer & dryer and I’m quite happy with it and it’s 11 years old. The one thing I do after emptying it is I fill the washer with about 4 inches of water and then I flush it out with the spin cycle which gets all the left over soap out of the pump and hoses. Also when I’m done I leave the door open for a few day which lets the drum to dry out and prevent mold from forming inside. Speed Queen also uses a direct drive motor which eliminates the drive belt which is one of the most common failures on a belt driven washer.

[@dfields9511]

It ain’t Samsung.

[@bensappliancesandjunk]

For sure!

[@mcz68l]

Had a Samsung a few years ago ,pretty sure the drain pump went bad on it, but I didn't have time to properly troubleshoot it (I was going to be out of town for a month and couldn't leave my wife without the ability to wash clothes) so I bought a GE front loader, fast forward to this year and its drain pump failed, but at least they screwed up and made it 10 minute replacement!

[@Saviour3]

How about an analog machine, one that no climate change nut can shut down bc of the chips or whatever new, unnecessary or necessary tech has been added ...

[@michaelgodown]

The only thing Samsung does are phones and TVs

[@asherdie]

@@Saviour3 speed queen

[@farmalmta]

Absolutely support the selection of Speed Queen. The other gorgeous looking washer/dryers have been complete crap. When you learn how "high efficiency" washers achieve that supposed HE, you'll be appalled and understand why clothes are stinky when run through them. Go Speed Queen, you won't regret it.

[@Latino_n_proud]

Agree with you 💯! SpeedQueen and Kenmore 80 series are my two favorites

[@OwnYourOwnBus101]

Cheers Ben! Thank you for giving us quality, honest content. Wishing you and yours, shining health and prosperity for many years to come.

[@jefferyg70]

Very informative and thorough. My brother used to have an appliance store and he said Electrolux was his best, most reliable brand. He said he hardly ever had a complaint. We bought a Kenmore front load washer and dryer set made by Electrolux and they lasted ten years. My brother said the biggest problems he saw with front loaders is people using too much detergent, not cleaning them monthly, and not keeping the gasket clean and leaving the door open so it can dry out.

[@tracykaetzel9517]

Agree completely. I have a commercial crossover model washer and dryer from laundrylux a division of Electrolux. My hubby sells commercial laundry for 20 years and the Electrolux crossovers he got for me are bulletproof. Prior to this I have went through several residential lg and Samsung and whirlpool.

[@steadyeddie7453]

The front door seal can harbor a lot of slimy mold. You cant see into the seals folds so you don't know it's growing mold. Best to keep the door open when not in use, and run a hot load with some bleach ~ 6 months. Also, pull out the detergent tray and look all the way in the back for black mold. Best to also leave the tray pulled out to air when not in use.

[@jefferyg70]

@@steadyeddie7453 Yes, you need to dry all around the gasket and in the fold, and the space around the detergent tray can get nasty if you don't clean it. However, you need to RUN A CLEANING CYCLE WITH BLEACH OR OTHER CLEANER AT LEAST MONTHLY! We use white towels and washcloths, and we use bleach about every third load. If you are washing at least one load per week with bleach you may keep the mold at bay, but you still need to run the monthly cleaning cycle to get rid of any buildup of detergent, mold/mildew, and other grime. A lot of washers have a "clean" cycle, but I would recommend putting a cupful of bleach in the empty drum and running it on a normal cycle with hot water. Most dispensers won't hold a cupful even if you fill both the detergent and bleach cups. We also regularly use bleach-free laundry sanitizer because our son works outside a lot and his clothes often get really nasty. I suspect the sanitizer is also helping keep odors at bay in our machine.

[@catherinesanchez1185]

This ! People forget appliances still need a little maintenance. I keep the door open on my front load too and run the sanitary cycle with some “ washer cleaner “ every few months . I also use very little detergent. Unless you dig ditches for a living , most adults clothes are not that dirty.

[@GlennLaycock]

When I was a kid, I was the one who did the laundry - I used to make up 'tick sheets' saying what I had done to it; kind of a pretend business and sign I was a kid for sure. I remember the transmission went on the Maytag (dryer was speed queen), and the service guy told me that the reason I loved washers was that they are just like cars and are machines that you can take apart to repair.

[@Bass.Player]

Jesse White Jesse White (born Jesse Marc Weidenfeld; January 3, 1917 - January 9, 1997) was an American actor, who was best known for his portrayal as "Ol' Lonely" the repairman in Maytag television commercials from 1967 to 1988.

[@winstonelston5743]

He also played the mayor ("the Uriah Heep of the hookworm belt") in the 1972 movie _The Brothers O'Toole_

[@Westgirl277]

I have been researching for a little while and your video today just helped me tremendously in finally making my purchase. Thank you so much.

[@BuddyLuv]

fantastic and super informative. thanks for all the unbiased info and I'm really pleased to hear someone in the industry being forthright about the decline in quality over the last 15yrs. I bought a Whirlpool washer/dryer set back in 2004 (branded under the Sears label Kenmore Elite). The set was constantly on the go for 15 years and NOT ONCE was a repair ever needed. I regretfully sold the set because of a big move and have been miserable about washer/dryer sets on the market ever since. Especially stay away from ANY Samsung appliance!!

[@janetrichardson2644]

Love my Speed Queen residential washer and dryer. I’ve had three washers in 45 years of marriage. The first two were Kenmore (before they were junk) and they remained with the houses when we sold them. We built a house 6 1/2 years ago and purchased all the appliances ourselves. That led me to do a lot of research and I went to an actual appliance store which was also the authorized dealer for pretty much all brands. My sales person was also the sales manager and took the time to address my desires and concerns to make recommendations for all my appliances and Speed Queen was his recommendation and he has 4 kids and that’s what he loves. Yeah to mom and pop appliance stores.

[@galyna2003]

same here. Speed Queen. FINALLY got a machine made in USA.

[@helenmak5663]

Speed Queen club here. I love the fact that it cleans with water and cycles are shorter. May I know which refrigerator you bought from the appliance store? And how do you like it?

[@richardclark9609]

Speed Queen is the best. They cost more but well worth it, as they last and do a great job.

[@patcurrie9888]

Bought top of the line Maytag set in 1996, still going strong 27 yrs later. Salesmans told us not to get rid of them, repair them. Last drier repair and washer rebalance was about 8 yrs ago, $34.00 Sounds like Speed Queen is the way to go today if you want longevity.

[@cliffterrell4876]

Because Maytag is owned by whirlpool, whirlpool has made certain that no pre 2007 Maytag parts are longer available. Maytag today are just as shitty as whirlpool products.

[@AdvancedUSA]

I have 50+ year old Maytag washer and dryer. They’re 100% mechanical - ZERO electronics. During the 50 years of service I started having some issues. Had an honest repair man come out - told him to replace EVERYTHING that could fail in the next 10 years. It cost around $500. Compare to the new ones and you’re looking at $2,000+ junk which will fail in around 8 years.

[@johns6704]

Had a rental and replaced a bad dryer with a speed queen. Then when we moved into the new house about 8 years ago bought new Speed Queens. Great machines. Not sure on just what the energy differences are but I've never had any problems with the three machines I've purchased. And I know that dryer in the rental was heavily used cause I had four different tenants. In our home I have five boys, wife, and me so again we use the machines a ton and haven't had any issues. I have a top loaded speed queen with the manual dials no electronics. My father in law bought some newer speed queens and I think he has some electronic panels but so far no problems for him either. It really isn't a contest. Even the paint on the machines is better. If you don't want to have to worry about these appliances do yourself a favor and find the small local dealer in your area that sells them and buy them and then forget it. I keep hoping speed queen will make something else like refrigerators or dishwashers.

[@nole8923]

My Speed Queen has lasted since 1993. No joke. It doesn’t have all those bells and whistles. Just turn the knob to the setting and pull out.

[@REXXSEVEN_II]

Exactly, that's all you need.

[@symbionese2348]

Just replaced a 1983 Speed Queen H5000 that worked first for a family of seven people, then for one of those children and spouse, then for another couple, then for me. Finally, the tub seal leaked so much as to be intolerable, and the machine had been completely obsoleted because it was impossible to disassemble. (The factory epoxied the tub nut.) Replaced it with a Speed Queen 30 lb. top-loader, which I am in love with.

[@rogervonita]

What else do you want in a washing machine? I don’t want to play with it. I don’t want to learn a whole new and different ways of how to use it. I want to wash clothes. Why make it complicated?

[@thedadyouneverhadchannel3544]

Always always pull out.

[@mattheweburns]

The best washing machine I ever saw with something from the mid 70s. It had a tray that is set on top of the agitator that filters lint out of the water. Meaning when you dry your clothes there is far less lint. Also, there is a rain rinse option where this water flows through the clothing during the centrifugal cycles to really rinse them thoroughly. That and a little bit of borax will get almost everything very very clean and smelling fresh with her without detergent.

[@audvidgeek]

GE fliter-flo :) They used that design from the late 1950's up to the late 1990's before the government forced them to update them due to their water useage

[@idunnoanymore2870]

I forgot about the rain rinse and lint filter on the top load washing machine. I think it was on a Kenmore!

[@tommywatterson5276]

Yea, I remember those. What happened to those lint filters in washers ? It's been ages since I've seen those.

[@mikezylstra7514]

Our first automatic GE with Filter Flo (1957) had that AND a water saver! We had two tubs one was for water saver - you plugged it, and the machine drew back the wash water from the previous load if you wanted it to.

[@sunbeam8866]

The house I bought in '89 came with a 1977 GE Filter-Flow. Still working, but was on its' last legs when I replaced it in 2007, with a '98 GE 'curbside rescue'. Except for one major repair ($80 parts) done by myself several years ago, it's still going strong at 25. Not sure what I'll find to replace it. Maybe another oldie, or a basic Speed-Queen. But I'd hate giving up the GE's super-size tub!

[@stevenwymor1398]

I bought a used Kenmore (made by Whirlpool for Sears) about 20 years ago. It was probably 10 to 15 years old when I bought it and has continued to work flawlessly ever since. Knock wood.

[@savannahsmiles1797]

I inherited a maytag washer and dryer from my grandparents when we married, and I have no idea how old that was. But it did fine for us until we moved and left the set for the next folks. I bet it is STILL kicking.

[@ItCantRainForever2]

Me too. It has a water leak but I need to get it fixed. It's a cute powerful portable washer.

[@dayzey40]

They are easy to fix.

[@dianneunderwood8456]

I started out married life with a washer/spin dryer - didn't have the plumbing hookups for automatic washer at the time, so that was the next best alternative. What I liked about that appliance is it had a filter cup that fit over the top of the agitator (like the older GE Filter Flow Through models) and the water was pumped through it while the load washed. A great system if you like to hang up your laundry on a line or rack as there was little lint to contend with. The trend in washers has been to eliminate this feature and we are told the washer expels the lint with the water when it drains. However one has a significant amount of lint on the laundry that now only using a dryer can remove. Another great feature of that washer system was I could do more than one load of laundry using the same water (similar to a wringer washer where you start with the lighter colour loads to the darks). The separate spin section had a hose that you could attach to the washer basin, returning the water (if desired). Or if preferred, you could add more water from your tap for the next load. Very efficient for water usage. The only downside is you were committed to manually fill and drain, transfer the clothes to the spinner section when washed. I liked to wash a load, spin it out, then set it aside in a basket when after washing and spinning out all the loads, I would then refill the wash tub with clean water and give each load a rinse (followed by a final spin-dry). Believe it or not I am giving serious consideration to this type of system when my existing washer gives up the ghost. With the extreme drought conditions increasing each year, I think this would be a good system for water conservation. And yes if I went with the automatic choice, it would be the least computerized (Plain Jane) model I could find.

[@SusanBame]

I own a house built in 1992, and have been gradually replacing the appliances since I bought the house in 2014. The Speed Queen washer and dryer are still doing great; my appliance repairman told me to start saving up for a new washer that I'd need in a couple of years (which would be about now). He suggested that the only washer I buy would be a Speed Queen. Period.

[@JK-tq4qf]

Be care of which Speed Queen you purchase. The TR series machines are terrible. I have the Speed Queen TC5 series the classic washer and it functions like a traditional washer. In all honesty, If I were you I'd just replace the components breaking on the washer and dryer you have now from '92. the parts and repair will be minor vs spending thousands on a new set.

[@elevatorproductionsbymaxpassa]

Did you have a 1992 Speed Queen washer 'n' dryer?

[@richpeggyfranks490]

Yesterday I purchased a $700 Maytag top loader washer to replace my 8 year old $1200 LG front loader. In that time I had to replace the drain pump, the door gasket and now there is an issue with the drive system. It's the inverter type. The control panel on this machine looked like something from the space shuttle (which we only used the "cotton" setting), it stunk and leaked everytime we used it. I live in a small town and did the repairs myself since the only local appliance repairman only works on front loaders that they sell. They work on any make/model top loaders. The new washer doesn't have any touch-type controls. Instead, it's all knobs and a start button. I paid $40 to have the LG hauled away. That's the best money I spent in a long time. The difference of water usage, electricity, perceived increased cleanliness is all negligible. I have talked to around a dozen people in the last few days who have also replaced a front loader with a top loader, including the salesperson. Thanks.

[@dianevaness4776]

Speed Queen. Also loved my Maytag. Lasted 30 years. Moved it three times! Now a speed Queen. Which my mom had in the 50’s.

[@proth1951]

This one video is packed full of facts, advice and solid information from an experienced straight shooting service technician.

[@InvestmentJoy]

One thing that I would love to see someday would be a comparison between the lowest end commercial washers and the highest in residential washers. You would not be able to include Dexter in that test but it would be super interesting to see a Speed Queen Horizon and a low-end single-phase wascomat compared to a similarly-priced residential unit. I have a feeling that the cheaper light-duty commercials designed for laundromats would totally beat the pants off of the residential unit. We have beat those Horizons to death and I'm sure you have seen them, imagine we've had the equivalent of 15 years of residential use and they're still trucking along having had replace a drain pump I think once

[@vince8388]

Worked for a company years ago that bought inglis washers and dryers brand new ,Then tore them totally apart rewound motors, gear box upgrades, repainted them and sent them back out to last a decade of commercial use .

[@5610winston]

The coin laundry within walking distance from my house has some of their top-load Speed Queen machines that are forty years old and still in service. They have replaced eight of the forty or so top-loaders, four with SQ and four with IPSO (another Alliance Laundry Systems brand, these being indistinguishable from the SQs except by the name plate). If I need to wash heavy items like horse blankets or sleeping bags I use the IPSO front-loaders at the coin laundry, but for work clothes and daily laundry, my home market SQ TC5000 does a great job.

[@guytech7310]

Brandon, Is Ben related to you? The only difference between you and Ben is the beard. Even Ben's voice is nearly the same as you.

[@RobertMememe]

A speed queen are the better machine because most of it is the same except for the the commercial with the coin operated. If I had the money I would install Dexter machines in my home and those machines will outlive me

[@ccoder4953]

@@guytech7310 Yeah, Ben is Brandon's brother. That's actually how I found this channel - Brandon mentioned it when Ben started it. That's also why that's Brandon's laundromat Ben is filming in.

[@mrsmith1339]

My 14 year old LG front loader needed a new hub on the rotor. 4 screws removed the back. 1 17mm bolt removed the rotor. 3 screws removed the hub, which was available. I was very impressed. That's the first repair in 14 years.

[@kickassclone75]

and look at that! you saved yourself $350 and having to deal with Dumpster Dan the appliance repairman who would have taken 3 trips to fix that. and would have stripped out one of the bolts causing the shaft bearings to fail after a month ..... smart guy!

[@Lewisusa11]

I also did a repair on my LG front loader, $10 speed sensor, and repair people said I needed a new $400 stator. I found an LG stator on Amazon for $75 and bought it as a backup. Repair scum never mentioned the possibility of a bad speed sensor, found out about it on youtube.

[@washingandmowing15]

Hey thanks for repairing it! I hate it that people replace LG washers with the least reliable washers out there.

[@FreihEitner]

Great and extensive explanation/review. It was about the time this video came out that I was purchasing my first new washing machine in 14 years. When I bought my place, I paid what I could afford (after mortgage down payment) and got a technician-refurbished Amana. It may be my historic best ever purchase. Coming from apartment living and paying several bucks a week to wash clothes, I had paid about $300 total for that washer + dryer and got 14 and 11 years respectively out of them. Based on many reviews, I went with a Speed Queen TC series and plan to get another 14+ years from it.

[@JenniferJones-kj3gi]

Our washing machine crapped the bed after almost 14 years of use - not bad. I've watched a few other "best" washing machine videos and found yours to be very informative and thorough! Thank you very, VERY much!!!

[@paulc.2980]

I have a 32yr old Whirlpool Super Capacity 2 speed Automatic Top Loader which I repaired 4 times over the last 32 years........runs great!!! Luv your channel!!!

[@andyleibrook6012]

My Maytag top loader just turned 45 this month. It's been used at least twice a week every week since 1978 with only a water inlet solenoid valve replaced 5 years ago.

[@stevesmith756]

AWSOME

[@dclaet1135]

My 1994 Kenmore Series 90, made by Whirlpool, is still going strong after 30 years of heavy use! Only had to replace the lid switch, which was very simple to do.

[@catherinesanchez1185]

20 years ago I was working fur Home Depot in their appliance department. When I bought my house decided to invest in a good washer / dryer . I bought the LG front loads ( the big ones ) with the Direct Drive motor which cost $300 more . The washer cost over $1100 back then !! Dryer was almost free cuz I had a gift card and they were running a Black Friday sale . I make sure to leave the door open , so I’ve never had issues with mold , put cleaner ever few months . They still run great and wash really well .

[@bensappliancesandjunk]

In our experience, LGs have often been the most repairable units we've gotten for used haulaways. We've fixed and re-sold units from 2006 and 2007 quite often. Probably more than any other brand (although WP Duets come close). However, lately, WP's quality has been abysmal whereas LG is quite a bit better. Probably not as good as 2006-2007, but still good.

[@djflynn53]

We purchased the SpeedQueen TC5 and matching dryer about 3 months ago and they have been incredible. Very fast wash cycles and they get our clothes very clean. Well worth the price premium.

[@josephpuchel6497]

Hey it was good decision to get Speed Queen heavy duty model Excellent machines

[@mattpetty7717]

We just got the same set and well worth it.

[@daizyduke12]

My almost t0 year old washing machine just started leaking. I suggested to my husband that we go with speed queen

[@VeritasEtAequitas]

Fast but how harsh are they on clothes? That's another cost that wasn't even mentioned.

[@josephpuchel6497]

@@VeritasEtAequitas They aren’t that harsh on clothes.

[@Rigakk]

Great video Ben! Only issue I can see with your error code ranking system is the brand presence in the market. I don't think it would change the results much and Speed Queen would still probably be in first, but for example there may be way more of one brand out there in the market than others. So that leads to way more people searching for error codes even if the failure rate is similar or better than a brand with much less presence in the market. Just an important factor to consider in my opinion for that type of research.

[@bensappliancesandjunk]

The numbers weren't raw numbers, they included all searches indicating market volume as well. So brands like GE, Speed Queen, Frigidaire, Bosch, had way less searches overall than Samsung or Whirlpool. The ratios of searches for products vs. failures was what made the ratio.

[@rockjockchick]

@@bensappliancesandjunk cool that you factored that in. Thanks

[@mrs.i.one12]

I’ve had to replace stoves and a refrigerator. But the GE Select Washer & Dryer that I bought in May of 2003 are both still working great! Ive had them for 20 years and I’m not getting rid of them until they give up the electrical ghost!

[@Justin-ve5mg]

Love the search ratio analysis. Absolutely brilliant. Thanks

[@matthewhuszarik4173]

I have had a Kenmore washer and dryer for 37 years. When they were 25 years old I bought replacement’s because the washer had a small problem. I fixed the small problem myself and have now been using them 37 years. I still have the brand new replacement washer and dryer in the garage waiting for my initial pair to fail again.

[@wendyoneill948]

Great consumer report style video! I struck gold a couple years ago when I bought an older used Speed Queen washer and dryer set from a young couple who were selling because their parents gave them this used set when the couple moved into a big new house, but lucky for me, they wanted a pretty, new washer and dryer. I’ve been running that old plain Jane Speed Queen nearly every day. She runs like a champ. In the last 10 years I have had a beautiful Whirlpool top loader and the bearings went out, and I had a nice Maytag top loader, and the bearings went out, and I had a deluxe LG…and the bearings went out, and no, I don’t overload the machines. I now have a year old top load GE with a wash plate and the old Speed Queen. Next washer will be an older agitator model or a new Speed Queen. I always get an extended warranty on a new appliance. It has been well worth it. The only dependable thing about new appliances (save Speed Queen and a couple high enders) is that they will break down within 3-5 years. Lowe’s extended warranty is such that if they can’t get a service tech scheduled within the set time, they will send you a Lowe’s electronic gift card for the amount of whatever you paid for the appliance.

[@grazz7865]

The bearings went on my LG too. Might be an issue with LG. I also never overload the washer and I always set the spin to low. We had family over a few years ago and they decided to use the washer (without asking). Shortly after, it was making horrible noises on the spin cycle. A seismologist showed up at the house one day 😂. So I’m sure they overloaded it and just used the default settings which is super high on the spin cycle (by default unless you change it). I’m not going to say no, especially to family, but ASK me. It’s not your house. There might be a certain method to running it. When I go to other people’s houses, I sit with my hands folded until I’m told to move. That’s just respect when you’re in someone else’s house

[@areject17]

I bought a tc5 yesterday because of your information. I installed it and used it. So far I love it! Thank you soo much sir

[@Chebornek]

Luv your informational videos, Ben. Very comprehensive, easy to digest. Big help for consumers.

[@automatedelectronics6062]

Years ago, I inherited a Kenmore washer and dryer. The washer my grandparents bought new in 1965. Because the tub had some pinholes from rust and was leaking water. I didn't think about it at the time, but I could have kept it going a little longer. As I repaired my washers and dryers myself, the only thing I had to fix on the washer was replacing the water pump once and a belt once. We replaced it with another Kenmore in 1993. The dryer was a 1968 Lady Kenmore, which was electronically controlled. I replaced the drum belt in 1979 when I inherited it and then about a year before I replaced the dryer in 2022. The reason I replaced it was that the heating coil broke and a new one wasn't available. In January 2023, we replaced the 1993 Kenmore washer. It was leaking a little water on the floor and my wife wanted a new washing machine. Both of the latest replacement machines are Whirlpool. The main reason we chose Whirlpool is because they are made in the U.S.A., reliability has been good and parts are easy to get.

[@destroytheilluminati770]

yep, sears kenmore were good washers, i have one thats almost 35 years old, still works great and has never failed or had a part replacement, the dryer that was bought as a matched combo ended up having to be replaced because heater element was going bad and a new one couldn't be found for it, replaced with another kenmore and its been great.

[@grazz7865]

I too inherited a kenmore when we bought a house in 2008. Worked fine for years. They certainly didn’t believe in conservation back then😂😂😂. That sucker had to fill up with 55 gallons of water before it would start 😂😂😂

[@zuzuspetals9281]

I have an inherited Kenmore from 1976 which we’ve been able to keep repaired so far. The last time a man who rebuilds washers took it apart and put it back together. I’m not sure how much longer it will last but it’s much better than anything on the market now. Our search for repairs are part of his *

[@grazz7865]

@@zuzuspetals9281 I was having this conversation with my boss and he told me “planned obsolescence “. They don’t want you to hold onto a product for 100 years anymore. I think electronics even more so. They can program the machine exactly when to fail.

[@marshmower]

​@@grazz7865 planned obsolescence and "conservation" go hand in hand. It's like heat pumps. Yeah it might be saving a little but it's running constantly and that little motor will only take so much. Having to flush 6 times and play with coat hangers😂 or having to wash 1 article of clothes at a time is more than a waste of time. Time is money. Also it can make you nutty. 😅

[@2fathomsdeeper]

Our Speed Queen's are still going fine after 35 years. They're a HD commercial model. My friend's dad worked at the plant in plastics molding.

[@the_big_dog813]

I've had many brands and models over the years, and there is only one best washer: Speed Queen. They cost more, but use actual water (not a little spritz), get your clothes clean, and are incredibly well engineered.

[@claudiahansen4938]

Maytag top loader washer bought in 1995 still going strong. Gas dryer of same vintage as well. Considering Speed Queen for new house being built in s.w. Florida. Thanks for your review.

[@samuelspade889]

I had the same vintage… POS from the start…. Constantly throwing up lint all over washed clothes. After 25 yrs, I gave up and got rid of it when it’s pump failed. I was happy when I replaced it with a Speedqueen.

[@davidmiller9485]

Here is a point for you. I went to a speed queen outlet and bought a "commercial" unit that had the coin system removed. That was in 1981. That washer is still working just fine. (the dryer as well). That is how I will continue to purchase washers.

[@farfignewgenfrackenheimer8865]

We had a Maytag set from 1952 that had push button settings. Both the washer and dryer had 10 buttons on the panel for different wash dry cycles and when you pushed one to start the machine you could hear the gears in the panel setting to start the cycle chosen. The only reason we changed was that we were moving. One of the movers actually bought them.

[@jw77019]

Those were from the early 60s. One of the most desirable vintage machines. The Beverly Hillbillies had those. Theirs was a gas dryer. The gas company sponsored them. They had a gas dishwasher (Arkla) which almost no one has ever heard of. The superior heating of the dishwashers made them very effective compared to what was available at the time.

[@victorhoe2321]

I grew up, starting with a Maytag electric wring washer, then it was a Speed Queen (that I maintained for my mom until after College. When I got married, we had GE and Magic Chef Washer/Dryers. When our baby was born, the Magic Chef electric dryer washer/dryer with us getting a gas dryer because it was faster. When the Sears Kenmour gas dryer control board, we switch to LG front loader washer and gas dryer. I am an EE, worked on the design of the pancake motor used in the LG frontload washer.

[@MollyMiaAndMe]

Sadly, almost 5 years ago, I replaced my 1999 Kenmore DD washer with a Whirlpool top load without an agitator. I returned that piece of crap, thanks to Costco’s wonderful return policy! The new Speed Queens at the time were the redesigned crappy design. I found a lightly used, 2.5 year old Speed Queen for a bargain price of $200! I still miss my Kenmore DD and wish I had never replaced it! Lots of great info in this video, and all your videos!

[@nattamused9074]

If we could ever afford it, we’d get a Speed Queen. But for now, I’m thankful for the used set of Whirlpool’s I just bought for $450. They are an older style, and I love that the lid doesn’t lock like my Amana did, so I can add more things whenever I want in the cycle. I also love that I can pause the cycle and let it soak as long as I want, and it actually fills up with water. I had a brand new modern Samsung set with a top loader for less than one year before the stupid computer panel quit, a $700+ fix. Never again. I’m going to stick with cheap, used, old washers and dryers until I can afford a speed queen.

[@nuversion8673]

Mom's Speed Queen was bought new in 1972 and finally quit in 1997. 25 years! It was a top loader with agitator of course. Speed Queen is worth the money!

[@davidammonds2011]

Products were made much better years ago.. now they only want them to last a few years so u have to make more purchase

[@caseydaley11]

1 million views plus! Way to go Ben you are the best video producer about appliances I've come across on utube. Everything you say either teaches me or is identical to my hands on experiences. I love learning about appliances and fixing them fie people. Just wanted to say thanks for your insight. Appearantly I'm the only appliance repair guy in my town so I'll be studying more of your business structure videos too.

[@DISGUYROX]

I made a comment here this AM about being in the business for 40 years and feeling that it's a treat when I run into one of the old wigwags. As for Speed Queen which is mfgd here in WI, I have recommended them to more than a dozen customers and, after a few months, I ALWAYS get a thank you call. Those of us who have been in the business for a length of time have our preferences due to what we've seen and worked on and, in my small city, it is all butt impossible to get service on samsung and/or lg. As for my own appliances, I have older, PRE~electronic Whirlpool washer & dryer nad an old gas range with pilot lights. If the power goes out here, I can still cook;) Thank you, Ben. I have s'cribed to your really good site.

[@Agent77X]

When buying a new washer, get one made before the 1990s! Might find them in estate sales, garage sales, used appliance outlets!😊

[@lwolfer5170]

Very informative! Exactly the kind of review, reseach, and opinions I was hoping to find. I just didn't expect to find it all in one place. Thanks!

[@lolamurphy8659]

Thank you for this review. I am strongly considering buying the Whirlpool washer/dryer and your review covered a lot of my questions and concerns.

[@dantreuthart9146]

Hi Ben, Thanks for the great videos and information. I had forgotten to clean my LG refrigerator (8 years old) for three years. I pulled it out and removed the back plate. It's amazing how much dirt and crud builds up. Cheers

[@haroldingpatrick1924]

If anyone is on the fence with Speed Queen top load vs front load, get the front load. I bought into the hype on the TC5 and purchased one when I bought a house. I immediately noticed poorer cleaning ability compared to the Speed Queen front loaders I used at my old condo with a communal laundry room, particularly with visibly dirty clothes, sheets and other bulky items. A new FF7 fixed that and the TC5 is sitting in the garage. Old school is not always better. . .

[@johnalbanese30]

I have the tc5, and I have no problems. I work in the transportation industry, and my clothes get very dirty, and they come out clean.

[@d.e.b.b5788]

The problem with front loaders, is that you have to leave the door open, or the remaining moisture will mold inside. That open door had better be in an area where NO ONE walks past it, and no child can climb into it.

[@nedhill1242]

Back in 2002 I bought the Whirlpool Duet matching front loading washer and dryer. Still running strong today! I got them from Lowe’s for around $2500. Not each. Both of them! Best purchase I’ve ever made. Love them. They clean infinitely better than top loaders.

[@bensappliancesandjunk]

Great set! Was this in the US or another country?

[@RowlandGosling]

Thank you Ben. Speed Queen has been our favorite for many years.

[@tomfuelery2905]

Wow. The work that you put into your videos is impressive.

[@BAPJR]

The subtle jokes are always hilarious man! Good job on the thoroughly informative video.

[@bensappliancesandjunk]

Thanks!

[@HotspotsSoutheast]

My Kenmore washer and drier lasted over 30 years. The washer in all those years cost me $9 to repair. The only thing that ever wore out were the little plastic pieces that grab the gears on the agitator. You can buy those online for like $3. The dryer timer was first to go, requiring you to manually stop it after a while, but eventually the motor got clogged up with lint. The motor isn't even enclosed in a case so all that lint gets into the motor. But still it worked for almost 30 years. The washer still runs but it smells hot when running, so there is something in there causing friction. I could probably fix that but for now I'm looking at a new set. So for now I'm washing clothes manually in a tub, and when the dryer died I disassembled it and instead I put a dehumidifier in its place. I hang the clothes after they have been wrung out in the laundry closet and shut the door. They dry within a few hours. I'm in no hurry.

[@annaqsmith]

I have a 24 yo kenmore dryer. It works just as well as the day I got it. Unfortunately I got rid of its matching washer in 08-09. It broke for the 2nd time so I got an LG front loader. It’s 15 yo now n still running well. ::knock on wood:: I am tired of the cleaning maintenance it requires n am preparing to get another top loader. I would love a speed queen but the tub is so small 3.2 cf. I did hear tho that a larger tub is coming.

[@taroman7100]

Talk about built in obsolescence. All of these appliances from China are junk! Tomorrows landfill no matter how much you pay.

[@mariondudek564]

I have had 2 Electrolux and they were excellent. They handled regular washing of large dog beds and numerous cat beds along with family laundry and bedding. That Dexter looks very tempting. Thanks for your video!

[@HeavyInstinct]

I have a Kenmore washer and dryer set that I bought USED over 25 years ago now. I've had to replace the belt and the heating element in the dryer once in that time and have never done a single thing to the washer. They both work just as good now as they ever did. My plan is to see just how much longer I can make them last because unfortunately, they just don't make things to last like that anymore.

[@Fazzel]

I have Kenmore washer and dryer that I have had for 35 years and works fine still so far.

[@arceneaux66]

They don’t build them as well now.

[@marshmower]

Replace everything on it. New stuff has been mandated useless.

[@lisat9707]

I have a front load Kenmore. 15 years and going great! Had to replace this $30 tiny part and going to replace a couple other wear parts soonish. But after pulling off the back it's crazy how simple and robust the motor is.

[@raymondgarafano8604]

I was talking to a guy at work about this, and he told me,"The guy who fixed my washer said to 'keep it' as it is very well made." I know ppl who had fridges last for well over twenty-five. Nowadays electronics are in so many appliances, instead of a twenty $ relay is a 250 $ circuitboard which if just 1 component goes bad, the board is worth less than dog doo, AND now a washer has TO HAVE the safety set up that locks the lid so a kid does not stick his hand in the washer. SERIOUSLY? I don't know if it is just appliance builders or the Government making them do this but it jacks up the cost of a washer just so some kid does not get hurt. Hey if a kid is foolish enough to stick a hand into a machine after Mom said "You don't play with a washing machine."

[@tammyschilling5362]

Oh! I just saw that clip with the GE filter-flo! I used to have a 1970ish Magic Chef machine with one of those filters! They were the BEST! I really miss that filter. It really made a difference! Less lint from the washer meant less lint in the dryer, which improves dry times and helps prevent fires. But more importantly, for those of use who don't use dryers all that often, getting the lint off in the washer makes a huge difference to how clean clothes look. Without washing filtration, you can get lint haze all over the clothes and they look dull or dirty sometimes. Super annoying.

[@Greg-tj8rg]

I'd like to see a video on which units are most easy to repair and have the greatest parts availability. I think your idea of looking at failure searches to brand search ratio is a great idea. In practice though, Speed Queen is going to have deflated numbers due to units being simply unaffordable for the average shopper. Similarly any company that offers units for only a few hundred dollars should have far more failures. I think lookin gat number of repair searches and comparing that to number of units sold is a more fair comparison.

[@cilla5277]

My lord Ben! You make the best videos with the most information I've ever seen in any field. Thanks!

[@robertmaxwell3220]

A few years ago,from a used appliance store,I bought a Roper.Were making appliances since early 1900's.Old style,slow,but has worked well with lots of use,appears bombproof!

[@d.vanwinkle9482]

I’ve have an LG washer and dryer for around 20 years or more. Replaced two pumps. That’s it. It has done thousands of loads. My grandmother always bought Speed Queen. She was still using her ringer washer until about 1990.

[@Pooroljc]

I love your video's, they're right to the point and your illustrations are fantastic. I have a 20 year old Fisher/Paykel that still going strong, but I know someday I will have to replace. Thanks again..

[@snaplash]

My Sears Kenmore front loader pair have been running fine for at over 20 years. The driyer had a heater relay fail several years ago (Replaced it). One thing I like about the washer is that I can pause and open it at any point in the cycle. I've heard that some units won't let you open to add things or redistribute the load. One caution with low water usage front loaders: If it takes a long time to get hot water to the washer location, it may stop filling before the hot water reaches it. I fixed it by running a short plastic pipe directly to it (basement) instead of the roundabout 3/4 copper run that contained several gallons of cold water at startup.Another option if you have gallons of cold water before it gets hot is to buy a washer with water heat.

[@danavelez5615]

Our 1999 Kenmore top loader washer and dryer is still going strong!

[@SteveB88]

As a guy who works in the apartment maintenance field, the apartment complex I work for has the washer dryer stacker combo from Frigidaire in all the units. that thing is a pile of crap. We have gone through so many motor control boards in these. And just like you said, at that 8 year mark. and I don’t know how but that little pump at the bottom that drains the barrel keeps getting socks and other little garments stuck in it. so you have to take the damn thing apart and disassemble the pump to unplug it.

[@LatitudeSky]

Speed Queen all the way. There are a lot of reasons why most laundromats use that brand. They are good machines and generally easy to repair for shop owners doing their own repairs. But financing has to be mentioned. Alliance provides favorable financing for their machines in a way that works for shop operators. I'm not sure what Dexter or Electrolux Wascomat offers. Rarely see laundromats using those brands. Heck, I've seen only ONE shop still using ancient Wascomat in the last few years. That used to be the go-to dominant brand in my area for front loaders. Virtually extinct now and nobody has the newer models. Whole lot of places 100% SQ sometimes with Huebsch dryers.

[@anthonyc1883]

Interesting about SQ but I'd have to ask if the SQ consumer models have the same level of quality as the commercial models. Let's not forget that Chevy makes the amazing Corvette but also the Spark, and that car is nothing I'd ever want to be in. Same company, much different products.

[@heathwirt8919]

The Speed Queens also cycle fast, usually about 30 minutes. The quicker the machine can turn over a customer the more money it makes.

[@heathwirt8919]

@@anthonyc1883 The consumer models are identical under the skin as the pro models.

[@pattie4456]

Had a top Speed Queen washer and dryer … washer left rust marks on clothes, did not clean well and had to be repaired within 2 years. Dryer was ok but started making horrible clunking noises and also had to be fixed. After two sets of Maytags for a total of 45 years, which were wonderful, I was HAPPY to leave my speed queens behind when we moved out of our home. I now have LG which I love and they actually wash and dry well.

[@patricksp71]

Lorain Furniture and Appliance did a video on how Speed Queen changed the water levels and gave it a bad review and speed queen dropped him as a seller.

[@waltschannel7465]

We've had a Whirlpool Duel front load pair since 2004. Yes, 20 years old! The only problems have been the washer door gasket, drain cleanout, and the fill meter, which I was able to repair and not replace. We had problems with stench the first two years until we learned about the washer cleaners, and the HE detergents improved. The dryer has had no repairs but is probably due for a belt. We average 3 to 4 loads a week.

[@bensappliancesandjunk]

Duets are literally the best front load washer ever in history by a mile. The original-series Duets, mind you. 2003-2006. After that, they began their long decline into garbage.

[@lolamurphy8659]

Very helpful in deciding which washer to buy,

[@jeffcarello7446]

We bought a set of Kenmore Elite He3t frontload WD w/pedestals from Sears when we moved into our new home back in late 1997. They served our family of 5 almost daily with 3 kids involved in multiple sports. 26 years later both are still going strong today. I've rebuilt/repaired the dryer twice... simple stuff like drive belt, motor and drum seals. Electric heating element twice. Washer has been (overhauled twice) with flow valve, level pressure sensor, water inlet valves along with a few misc hoses. Water pump has only failed once in those 26 years. I purchased a backup pump 6 years ago. Its still in the box waiting to be installed when needed. Best 2 home appliances we've ever owned. 😊👍

[@Sam-hj8hy]

I bought a speed queen around 2012/2013 and it has been awesome. It uses ALL the water so your clothes actually get washed. I did have a repair guy come out once for it under warranty, but that wasn't really the fault of the machine. My house was hit by lightning and that shorted out the cycle timer. The repair guy said he had never worked on one before, but luckily I was able to diagnose it prior to him coming out so he made sure he had a new timer on hand so he didn't need to order anything and have to track a part down.

[@sherievaughn6475]

I bought a pair of large capacity, top load Maytags in 1997. They had 3 repairs in 21 years and were still looking and working well when we sold our house in 2018!

[@amzarnacht6710]

In my experience front loads are ALWAYS leaking out the front. LG and Samsung both had the same problem. The water drains down the front of the door and leaks between the gasket and door. And, of course, they make that gasket as fragile as they possibly can so it tears all the time.