Casting a Bag of Water in HOT! Resin - What Will Happen?

[@BensWorx]

Thanks for stopping by, If you have time you can check out my new range of Eggs here www.etsy.com/shop/bensworx

[@jtwolph7903]

You should try using a high heat resistant sous vide bag that won't melt so easy.

[@kscollins73]

#3

[@robertc49]

#3

[@ghazaleh1567]

Try bag of red resin next time please

[@edwardbyard2217]

If your trying to get the water to fully boil there is a calculator that will tell the temp it needs to get to under pressure in the pot, because as the pressure goes up so does the boiling temperature for the water.

[@jasonodell608]

#2 was pretty cool. Seeing how that plastic reacts, I wonder what would happen if you used shrink tubing or shrinky dinks.

[@stephanievivier290]

Brilliant idea

[@Keshlynne]

I would love to see Shrinky Dinks...

[@KhalidahTiaret]

Shrinky dinks is a great idea! I'd love to see that.

[@Corkies-1985]

Ooh that's a cool idea!!

[@theogmrbill1]

Let’s do paint ball’s in resin video, Let’s make this happen!

[@THEAPRILFOOL-1983]

That's an idea actually get behind 100% let's do it

[@AithwenQuinn]

Yes!!!!

[@stephanievivier290]

That'll be awesome!

[@THEAPRILFOOL-1983]

@@stephanievivier290 thanks

[@THEAPRILFOOL-1983]

@@AithwenQuinn I would also love to see what happens to heartburn tablets that you drop in the water and then drink I would love to see what would happen if you drop those down in resin

[@thenemosix6835]

Because the bags melt it would be cool if you got different color bags and put them inside of each other then see what they turn into. Seems like it would be cool. Awesome video!

[@BensWorx]

Thankyou, yeah that would be cool

[@natasja1977]

This would be so cool to watch

[@pauloreyfigueiredo]

that i would like to see

[@boeubanks7507]

Suggestion - Coat and cure orbreeze pieces in UV resin to give then a hard shell. Then cast them in resin the same way you did here. That will be interesting.

[@Faesharlyn]

Yep, I suggested this last time... seconding it this time!

[@cdey8512]

I had the same thought! I wonder how you could since they are so slippery.

[@boeubanks7507]

@@cdey8512 You would probably have to just put a blob of epoxy down and roll them in it to coat. Then set them on top of a UV light to cure.

[@YourOldUncleNoongah]

Im about to enjoy this video with an iced coffee, some GIANT choc chip/M&M cookies fresh outta the oven and a warm Saturday (Christmas Eve) All the best to You Ben and Family. A Very MERRY CHRISTMAS and a Happy and Healthy New Year to Everyone. Be safe out there folks!

[@BensWorx]

You’re making me hungry 😂, Merry Christmas mate

[@YourOldUncleNoongah]

@@BensWorx I wonder how a bag filled with water, inside an empty bag, inside another empty bag,& all SEALED along the opening with UV resin would go?

[@RebekkaRN1962]

Cool 😎 pressure pot footage. I think I enjoyed them in the order they were done...1, 2, 3 👍🏻 Btb honest & truly answer your question....#2 is my fav.

[@GamerWolvenna]

#2 is my favorite! I was sorta hoping you were going to put water into the bag with the orbeez too! I think it'd be cool to see some combination of orbeez and colored water turned into a lamp. Since they won't shrivel up you might get some really interesting effects!

[@Anxiety_Creature]

They were all cool, but my favorite is number 3. It does look like a little bag of candies, and the bag melting was really cool to watch.

[@ctempleman1401]

I agree especially when the bag is twisted at the top.

[@wildstorm3486]

I’m partial to #3 myself. But #2 was great as well. I just wanted to say thank you for the awesome videos this year Ben. Always look forward to what ever crazy/fun idea you come up with. Either on your own or the crazy/fun ideas of your subscribers. I don’t know if you have another video planed for this year or not. But either way I wish you a happy holidays.

[@nomadiavan6560]

The melting of the bag of the third one was so cool. Do you have colored plastics that would melt in the resin?

[@engelavdod18]

These are so cool! I love that you have a camera inside the pressure pot so we can see what happens in there. It's super interesting! Definitely the last one was my favourite, and the bag itself once it collapses inside the resin just looks awesome! Kind of looks like the little goldfish bags from the seaside, where you'd have a little goldfish in water, that might be interesting to cast like this with a little toy goldfish in the water in the bag?

[@alisonmary1443]

Awesome, all three are great but the most entertaining in the pot was 2, loved this 👍 Peaceful Christmas to Ben Family 🐾 and all ✨✨

[@BensWorx]

Thanks Alison, you too!

[@susandaniels9733]

I really enjoy the bag series and they are all interesting, but I think the latest orb one is my favorite.. thanks for sharing this video.

[@BensWorx]

Thanks Susan

[@bensimms7294]

If you have a heat sealer - like what you use for sealing food - that could give you a absolutely perfect weld seal that will stand up to more pressure than the zip style ones. I bet that would look good.

[@cherryshrimp2359]

They all were rather cool to watch. Hope you have more little projects for 2023. Wishing you and your family a Merry Christmas.🌲

[@themorrislessgroup]

So wholesome and fun! Like just such a positive guy .

[@heidiproctor5503]

The last one was super cool, my favorite one

[@sdhproductions8877]

I like them all. The third one with the orbeez would make a great lamp.

[@karengilchrist9774]

That was fascinating. Love potcam.

[@LisaVornhagen]

That was really cool! All three were awesome, but I this the second one was the best. I love the dramatic music you had playing!

[@BensWorx]

Thanks Lisa

[@jaspergoesrawrr]

This is so cooool! I love how the water bags exploded with a jet of steam

[@mel.e2675]

2 was my favorite, though all were very cool to watch!

[@NeonDreams7]

Very cool results! I like the 3rd one. Thanks for sharing!

[@BensWorx]

Thankyou

[@Hannahward6143]

I cant choose a favorite. Each has their own awesome quality. There is something satisfying about the orbees that lose and recapture the water endlessly.

[@jenniferwestphal-leath7866]

#2 was my favorite! All of your experiments are so cool!

[@Trudy.Villain]

Thank you Ben, your videos always brighten my day. Merry Christmas

[@BensWorx]

Thanks Trudy, you too!

[@samanthadean1083]

My faves were #2 and #3!!! Hope you have a merry Christmas Ben!!! ❤️❤️🎄🎄👍🏻👍🏻

[@lindahobbs5545]

I liked #3 as far as looks go. I thought #2 had the best action in the pressure pot. Merry Christmas to you and yours Ben!

[@BensWorx]

Thanks Linda, you too! 😊

[@trumpetbob15]

At 9:20, that music cue syncing up was awesome! Interesting experiment; love seeing these.

[@BillDerr]

I don't know if it would boil. You run it at about 45psi. At that pressure, it would increase the boiling point of the water. It'd boil at about 285°F or near 140°C. But if you release the pressure when it's still really hot, it would flash boil into steam and likely crack the epoxy like we've seen it do in past videos.

[@aztigerval1979]

They all look super neat. I love the different shapes that created when the bags shrunk and melted. Kind of makes me wonder what would happen if you did something with oil and colored water. The separation might be a cool effect.

[@phoebedavies4383]

Number 3 is my favourite but they all have their own interesting bits, thanks for your very enjoyable and informative videos. May you and your have a happy Christmas and a 2023 filled with good content and healthy fun ☺️

[@BensWorx]

Thanks Phoebe, you too! 😊

[@BensWorx]

Thanks Phoebe, you too! 😊

[@ameliasachs6704]

Merry xmas to you and your family, Ben! And all the best for 2023

[@williamellis8993]

Interesting, Ben. I think number 2 is my favorite because of the way it steamed when you released the pressure. Bill

[@xmas4203]

The abstract statue number 3 made with the orbis is really cool.

[@staceyritchie7100]

I liked them all but the design in the orbeez one was awesome! Can't wait to see what you come up with next!

[@vicky3791]

Love number 3 and the shape of the bag it left after curing

[@ScratchyPots]

Thanks! Merry Christmas Ben.

[@BensWorx]

Thankyou Stephen, you too! I really appreciate your support 😊

[@victoriaeads6126]

Merry Christmas! I like the shapes of the voids in the first two. I am also REALLY looking forward to seeing those dragon eggs in person!!!

[@LeeLee86]

#2 was my favorite!! It was the first one that went into the pot. I just like how the bag melted and made it look like ripples! ❤

[@karacoop]

Fun experiment! I liked watching the process #1 went through when it fractured 😊

[@Rookie_Rockounding]

Very cool mate! Love it! My fav is the end result of the Orbies! So cool lookin!

[@julietteneylon4243]

Merry christmas ben to you and yours. Looking foward to more vids in the new year

[@seb_cooler]

Loved all 3! First two made me think of the ice walls in GoT. Would look awesome with a white walker in front of it.

[@BensWorx]

Thanks Julie-Ann 😊

[@bethcaselman7952]

They all look awesome I really like all three of them they turned out awesome and very interesting

[@jbprospector3638]

That was so cool 👍 again you always put a smile on my face. Happy Holidays 🎄

[@BensWorx]

Thanks Mate, you too!

[@LordRae]

3 was my favorite. Good stuff. Thanks for the video.

[@avinashramroop1817]

You didn't disappoint, all 3 were great but i liked the 2nd one. Cheers and Merry Christmas to you and your family Ben!!!

[@BensWorx]

Thankyou, you too!

[@avinashramroop1817]

@@BensWorx Cheers 🍻

[@kendramanuel1276]

Oh wow Ben. Each one was different. All are very cool! 👍🙏🎄

[@sarahkwast1250]

I loved them all. They each tell a different story. 😊👍

[@SylviaRustyFae]

3 is def the best lookin one to me. The effect it got worked out perfect

[@lilpixie25]

1 was my favorite, it looks rly nice! I can see a lamp with that fracture design

[@ConnieConnie824]

That was Awesome! Best pot cam yet 🔥

[@mikkohernborg5291]

Might be an idea to glue the bag's opening downwards. Not that it seems to make much difference which way it is oriented really, as often the bubbles are on the side away from it, just above the base layer (guessing the resin hardens from the top, so it’s the easiest way to escape). But it would complete the sideways orientation series, and laying it flat would round it out. That is, if you decide to do more of these.

[@bettypaquette1904]

I liked all three. Different outcomes.

[@TheConwoman3]

I liked all 3. The orbeez was cool. I think putting the bag upright was a cool idea. You guys have a great holiday!! Can't wait to see what you come up with next year!💖💖💖🎅🎄

[@BensWorx]

Thanks Connie, you too! 😊

[@Tim-57]

Hey Ben They were all cool, perhaps the orbs is my favourite. I wonder if you preheat the water before bagging it, it would be quicker to boil? Happy New Year to you and yours 🎉 Thanks for another entertaining year of videos and as always, take care.

[@sikksotoo]

I liked the second the best, but Orbeez are always fun. Merry Christmas Ben!

[@davidskelton7960]

Have a great Christmas and a happy new year Ben

[@BensWorx]

Thanks David, you too!

[@Melanbrocolli]

All of them, Merry Xmas Ben and Mrs Worx 💗

[@trishharmon46]

The while thing was cool but number was definitely cooler looking. Thank Ben for Sharing

[@der_kluger_gunther8391]

the potcam this time was so "bagexplosive"! i love all of them but i think i'll go with the third one, the effect of the explosion was just so cool. oh and merry christmas and, hopefully, a good new year!

[@geoffwarnes9327]

Loved the effects of #3 Have a great Xmas to u and your family 🎅❤️

[@spencerkatty]

#3 was my favorite, followed closely by #2 I wonder if you could do a slower process of adding layer by layer of resin to a bag (just dip it in as you do other experiments). That way it wouldn't have the issue of melting the bag so catastrophically.

[@kellyfoster8903]

My first thought was, "Wicked". That was awesome.

[@BensWorx]

Thanks Kelly

[@hantieferreira4398]

Interesting experiment. Nr 3 is my favorite by far!

[@antuanferreira7132]

Number 3 was definitely my favourite!!

[@konoikurozora5851]

Second one was the most interesting to watch in pot-cam, but I really like the final result of the third one!

[@timalbertson4004]

Merry Christmas to you and your family 👪.

[@BensWorx]

Thanks Tim, you too!

[@osd-syrup]

Paused when you asked for our guesses. I have a feeling the top of the bag will melt and release the water into the resin possibly with a stream of bubbles. If that is the case I would like to see you do something similar but with glitter in the water or perhaps some glow in the dark pigment mixed into the water. Thank you for the great videos!

[@I-Am-Blue]

Always find your voice and videos so relaxing, someone i could totally chill out with on a fishing trip maybe double or triple bag the water, and allow water to cool to room temature saw someone put a Enclosed Ecosystem Shrimps Bottle in resin.. heat killed them

[@aicirtkciub9167]

All three. They are all different and nice. Merry Christmas Ben and family 👪

[@TheSassy]

Merry Christmas/ Happy Holidays Ben and Nicole!! Hope you have a wonderful day with your Fam 🎄🎄🎁🎁🎉🎉🎉🎄🎄💛💛 Freaking fantastic pot cam footage!!! I can't believe the second one actually had some water left, looks cool as heck. Would make a good snow globe. Also love watching the bags melt away. The first one i thought was about to exploded and was making the pot rock like mad, then my brain kicked in and figured it was you undoing the top 🤦‍♀️ Have you ever made a magic 8 ball? I'd love to see how you'd do it! Ooo have you thought about trying oil?? Thanks Ben 👍

[@BensWorx]

Thanks Sas, You too! yeah the pot cam was so cool, I think an 8 ball would be awesome to make and oil is definitely on the list. Thankyou for all your support throughout the year I really appreciate it! 😊

[@RobBoyBlunder]

I love how cute the bag of orbeez one turned out too! I have to wonder, would a cured shell of UV resin with water inside it survive something like this? Idk how feasible that would be but I just like seeing what fun stuff you come up with!

[@littlehelper4596]

My son and I like #3 the best. Cool video! Thank you for making these fun videos!

[@esra_erimez]

Hi Ben, I hope you and your family have a very Merry Christmas

[@BensWorx]

Thanks Esra, you too!

[@Deekm69]

Lol! The last thing you want is your "Ball's" shrinking! Great stuff Ben 👏 👍

[@rodgerbagwell7643]

I like all 3 experiments. All turned out the exact opposite of what I expected

[@BensWorx]

Thanks Rodger

[@WhenLifeTurns]

Ok so it looks like the bag is melting in the resin so if you could use a different material, more specifically one with a higher melting point you might get a better result. Does uv resin get as hot as the normal resin? Could you coat the bag with uv resin before putting it in the other resin?

[@hollypierce3076]

I like number 2 & 3 equally! Merry Christmas to you and yours!!

[@charlesbarnes6912]

Happy holidays Mr Ben and family

[@BensWorx]

Thanks Charles

[@BacktheBlue60]

I like 3 the best. I never wanted the video to end. You could keep conducting experiments and I would not get bored.

[@TheAruruu]

Suggestion: Get a small beaker or jar, and a smaller bottle. Pour some resin into the jar, then use the bottle to displace the resin to create a chamber in the center. Pressure pot that, allow it to fully cure. Create a base in a mold, much like you did here. Add some dyed water into the resin 'cup', put a solid ring of UV resin on the lip of the cup, then adhere the cup to the base in the mold. Now fill the rest of the mold with resin. The cup should disappear, and give you a nice crystal clear cylinder of water in the middle. tl;dr: make a vial from resin, UV resin glue it to a base with some dyed water in it, then fill with resin like normal.

[@kellbell8866]

I love this! Let's put some blue water in the baggie with the orbies!

[@aerynkelly]

That's new number 1 pot cam footage!

[@spokehedz]

A bag of air, inside a bag of water, inside a bag, in the resin. Like a turducken! Happy Christmas and new years!

[@happyscott72]

Great video. Love all you do. I liked 2 and 3 better. Just think of what you can do with trapping the water and adding things like a little boat. Merry Christmas to you and your family Ben.

[@torydavis10]

If you have the patience for it, I think the move is to freeze up a blue ice cube and see if you can paint a layer of epoxy on it and have it eventually cure in the freezer. You'll probably have to paint it one way, wait, flip it, paint it again, wait again. The waiting could take a day or two each time, if it ever goes. Once it does though, you can let it warm up and you'll have a little epoxy-coated cube of water, which you could give the same treatment you did your bags in this video. Let the pressure off slow after a full cure like the orbees, or better yet do a few so you can vent one violently after cure and vent one violently after set. [edit: perhaps it is smarter to paint the ice cube with uv resin, that might go at mostly normal speed even very cold]

[@candymatek3]

Leaves a really cool shape

[@GrandmaLoves2Scuba]

Wow! The potcam was so cool this time!

[@rustysmommy50]

3 was my fav and loved it when the bag collapsed

[@nicolakibble]

❤ 2 was my favourite - I love these experiments ❤❤❤

[@MnACreations]

I like 2 and 3.. Pretty cool experiment, Ben!

[@BensWorx]

Thanks Mate

[@mattersofthehartbynat8815]

Number 3 is my fave! Love, Nat. ♥️♥️🇦🇺

[@chancesimpson6545]

When you did the one with the orbees it looked like it could provide a nice little Christmas tree witch would look cool as an egg or a tree in a bottle

[@floydc3664]

I always enjoy your work

[@BensWorx]

Thanks Floyd

[@praisegod4538]

I liked all of them. Watched the pot cam twice on each, in case I missed something!

[@johnkriete2152]

That was awesome. I liked the first one.

[@tracybowling1156]

I predict an awesome video! 😂 You're still saving your extra resin, aren't you? I hope so! Anyway, I can't wait to see what happens with the water! 😀