Thanks for stopping by, If you have time you can check out my new range of Eggs here www.etsy.com/shop/bensworx
@WaiferThyme Жыл бұрын
Thats gorgeous,,!
@thercrubber3487 Жыл бұрын
When you get 1 million subscribers will you put your play button in resin?
@francisdenty3288 Жыл бұрын
Awesome results !but if you dry the orbies nice and slow till the point their almost bone dry they will draw in the resin and become full size and solidly bonded
@dalemueller9399 Жыл бұрын
great lamp look if you plan to make more here's some ideas to make better ones for sale on your etsy 1. have a more slimmer core of reason made of the opeq white color for better defussion of light from top to bottom (this saves on reuse orbez latter on to get out of the resin on outer layer) 2. with a the orbez on the outer layer of maybe 2 to 3 rows around the core of the opeq white core you can try making a diy heater box to try to dry out the orbez faster or a dehydration machines to have them dry faster and less on the far inner part of core of them not coming out 3. color resin layer and most likely last layer is up to your choice cause depending if its a 2 or 3 layer of that obez pattern for the poor any defects/unfilled holes just chuck it on the layth thin the outside just a tad and sand to refit in same container to fill with a clear resin poor for a nice look at end 4 if you do read this and like the improved way of doing it make a video 2.0 update on it to see how it looks
@liefmaston7803 Жыл бұрын
I have a great idea do this again but make a strawberry .This seems to be the perfect texture/look
@teriwood9657 Жыл бұрын
Imagine if you used clear orbeez. Then use a golden color resin. It would look like honeycomb. You could add decorative bees to it.
@jaycamp6298 Жыл бұрын
If you do this again, you should use the clear ones. They practically disappear when in liquid. Would save you the trouble of trying to remove them all
@Chrissylovesyou20 Жыл бұрын
Or glow in the dark ones!!
@Cmoney-2cd Жыл бұрын
That's a good idea
@Twoeggsq Жыл бұрын
Then they would be just taking up space while looking like nothing is there, what would be the point?
@hello-ef4bn11 ай бұрын
@@Twoeggsq so it doesn't matter if you don't remove them. the point is what you just said.
@dystopianlucidity4448 Жыл бұрын
Ben, I just found your channel about a month ago, and it has been amazing. I turn pens, and I admire your skills a great deal. That said, I enjoy your videos because you have such a wonderful personality, it’s like hanging out with a friend and watch something amazing come to life. Keep it up, cheers from Florida.
@BensWorx Жыл бұрын
Thanks Mate 😊
@drstrangefart Жыл бұрын
As a guy that hasn't turned a pen in ages I agree that these are very cool projects. Kinda living vicariously here.
@Haywood-Jablomie Жыл бұрын
@@drstrangefart I've never turned a pen, but I enjoy fried chicken
@goatlinton0798 Жыл бұрын
Your voice is so calming and your videos are calming aswell
@BensWorx Жыл бұрын
Thankyou
@Wyrmgirl75 Жыл бұрын
I really like that you can still see some of the Orbees, and love that you can flip it for a different effect! ❤
@lindseylord6759 Жыл бұрын
Love the purple side down! If you ever do this again, I think it would be extremely awesome if you shaved it off to look like a mason jar, and drilled a hole half way up in the middle and lit it up from the inside! Great job!
@dangerszewski9816 Жыл бұрын
amazing video! Just so you know, the chemical they use to make orbeez was invented partially to be a soil additive for droughts, to hold moisture for weeks if it has to and slowly release it. If you were to redo this pulling a vacuum if you can would help dessicate them faster, but you might have to literally leave them a month or two to get them all back to tiny plastic pellets.
@elizabethanderson3054 Жыл бұрын
I loved how this came out. Especially with a few of the dried orbeez still trapped. I think these lamps would light up a bit better with a tube style light, instead of the pick just at the bottom. Like a lightsaber type. Maybe put a tube in the center before whatever you make with the resin?
@CherrycatMatsuri Жыл бұрын
Amazing work, Ben! Only a day or two ago, a huge water tank full of fish inside a hotel broke, here in Germany. Over 1500 fish were in that tank. A few people were hospitalized, but no deaths, as far as I know. Your lamp reminded me of that tank! Almost felt like a small tribute to all the poor fishies. Keep up the amazing work! I can't wait to see more!
@BensWorx Жыл бұрын
Thankyou, yeah I saw that, it was so sad
@lilpixie25 Жыл бұрын
Oh wow those light differences make me think of the dawn and the dusk, I think both are lovely soft colors, and Id switch them out depending on the day! The Dawn and Dusk Lamp!
@marthacoomber3188 Жыл бұрын
Well that took longer than I anticipated🤣. I would swear for sure! Such a patient bloke Ben.
@jenniferpone Жыл бұрын
I LOVE the "under pressure" pressure pot ❤️
@quinnleydean8335 Жыл бұрын
When it's all just a little too big, Freddie (the big pressure pot) is certainly the way to go!
@Rookie_Rockounding Жыл бұрын
I think what I love most about watching your videos, is watching you explore your inquisitive and creative side. It’s just fun to watch and see what happens along with you man. Cheers!
@BensWorx Жыл бұрын
Thankyou! 😊
@laurasuthers1625 Жыл бұрын
It's soooo beautiful! I like both sides!!!
@BensWorx Жыл бұрын
Thanks Laura, me too
@freethebirds3578 Жыл бұрын
I love watching your videos; not only do you create wonderful things, there's something oddly comforting about the music you play.
@BensWorx Жыл бұрын
Thankyou
@I.____.....__...__ Жыл бұрын
@@BensWorx What is that main song? Shazam doesn't seem to know it (it finds a different song). 🤔
@birdtutorialart Жыл бұрын
I’ve gotten my grandmother suppppper into your videos! We both watch them each week and then call each other the next day to talk about them :)
@BensWorx Жыл бұрын
Thankyou! I hope she feels better soon 😊
@LSK77_ Жыл бұрын
Yessss Ben 👍 how dam cool did that turn out, and well done for mentioning Nick he is having a yt wobble and needs some extra love 💗 I do love your lights they are all so pretty ❤️ thanks for sharing
@BensWorx Жыл бұрын
Thankyou
@susandaniels9733 Жыл бұрын
Cool... I like the all blue look, it kind of looks like it is under water.. I hope that you and your family have a wonderful holiday season.
@BensWorx Жыл бұрын
Thank you! You too!
@nikitapoole2329 Жыл бұрын
You completely beat yourself this time this is my most favorite thing you have made I'm in love great job
@BensWorx Жыл бұрын
Thankyou 😊
@tigershirew7409 Жыл бұрын
Ben, I just want to say thank you for putting your respirator on, where we can see you doing it. I personally would love to see you do some content that is more a tutorial of how to work with resin and what that entails. I learned by accident that I should be wearing my respirator regardless that the resin I use is low odor - it's still not good for your lungs!!! I feel there is not enough content out there to education new users of resin to some of these safety fact. Also, how did you learn to use your vacuum pot? I searched for instructional videos and never did find any - I just learned through trial and error....Thanks again for your wonderful content.
@samanthadean1083 Жыл бұрын
This is soo cool!!! ❤️❤️❤️👍🏻👍🏻👍🏻
@rebecca2738 Жыл бұрын
Never knew I had a fear of holes until you mentioned it, that gave me shivers 😅 but no seriously thank you for your channel I love it!
@LisaVornhagen Жыл бұрын
That's really cool! I like how you get two different looks by turning over.
@BensWorx Жыл бұрын
Thankyou
@nicholebryan2012 Жыл бұрын
I definitely like it when it glows blue! Super neat project!
@Froggsroxx Жыл бұрын
You're both so chill and so chipper at the same time lol
@BensWorx Жыл бұрын
Thankyou
@MrGerhardGrobler Жыл бұрын
Amazing how symmetrical the orbees settled in the resin, causing such an evenly spaced spiral.. great channel. been almost a year now.
@BensWorx Жыл бұрын
Thankyou, I really appreciate it
@Nevi_A10 Жыл бұрын
Ben,once again you outdid yourself with another great piece! Thanks for getting me through these past few years
@BensWorx Жыл бұрын
Thanks Kevin, Take Care Mate
@alisonmary1443 Жыл бұрын
Orbeez are great wee things, a life of their own 😂Love the lamp but what a time it must've taken you, Thank you so much. Think I'd have the blue look 👍🐾
@BensWorx Жыл бұрын
Thanks Alison 😊
@lindahobbs5545 Жыл бұрын
Wow that turned out great! Merry Christmas to you and your family ❤️!
@BensWorx Жыл бұрын
Thanks Linda, you too!
@oges74 Жыл бұрын
That turned out awesome, and prefer the colour of it when you turned it over
@BensWorx Жыл бұрын
Thankyou
@johnwilliams8818 Жыл бұрын
I like the clear/purple side down... the purple blends into the blue. Its cooler IMO...
@suerobbins1830 Жыл бұрын
I love the color when you turned it over. Pretty cool project all the way around.
@amewood8893 Жыл бұрын
I'm always a fan of purple but either is beautiful!
@garzilla7123 Жыл бұрын
That was pretty cool to have it both ways, good idea. Great Job my friend.
@BensWorx Жыл бұрын
Thanks Gary 😊
@nancyollenburger2930 Жыл бұрын
Dual sides, I love this. Very beautiful. I like it both ways.
@BensWorx Жыл бұрын
Thankyou
@ClayAlchemist Жыл бұрын
5:26 Sorry, I'm a child and just about cried laughing about your shrinking balls. Loved the video!
@coloringwithd Жыл бұрын
Gosh both are pretty but I like it with the clear side down. Thanks for sharing 🎄🎄🎄
@BensWorx Жыл бұрын
Thankyou
@kimkimba1131 Жыл бұрын
This turned out nice. I prefer it with the purple side down, that way you see the purple and the blue. Well done
@BensWorx Жыл бұрын
Thanks Kim 😊
@camelliahyacinth5926 Жыл бұрын
This reminds me a lot of honey comb, makes me hungry as well as wanting one in an amber color scheme.
@aerynkelly Жыл бұрын
Looks cool with the little orbeez still spotted through. If you did this same thing, but instead of removing the orbeez after they shrink I bet it would be so colourful! They would be less dense then and let light through better
@maniacalmike5786 Жыл бұрын
I love how it reminds of the ocean, lighter blue shallow water and darker blue deeper water
@Wwhitewulf Жыл бұрын
Really like this. I like how you developed it along the way too, making what could have been a bad thing, a good thing. Both ways are cool.
@ThuriWeaver Жыл бұрын
This looked so cool! It'd be fun to see a recreated version of when it first went in--maybe with small round beads of resin the same size and color as orbeez that would all light up?
@aicirtkciub9167 Жыл бұрын
The moods are both so different that I like them both!!!!
@GDaddyTx Жыл бұрын
What a great project that turned out to be. I prefer the blue side on the bottom.
@TheDellaniOakes Жыл бұрын
Very cool! I love how that turned out.
@BensWorx Жыл бұрын
Thankyou
@Pinkstinkie Жыл бұрын
Three (3!) pot cams!!! The first Orbeez lightning storm was the best.
@MelissaM83 Жыл бұрын
5:32 lol I nearly spit my coffee out 😂
@nickknel Жыл бұрын
i really liked this. i feel you should have put this on a fan and left it for awhile. the orbez get even smaller in size then what yours were. they were not dried out yet
@ellishansen8115 Жыл бұрын
Hi Ben. They remind me of honeycomb from bees. I think I like the clear on top. It's very cool!!!
@BensWorx Жыл бұрын
Thanks Ellis 😊
@AChuck-pi6os Жыл бұрын
I liked it both ways. If I had something like that, I would probably alternate it.
@yesterdaydream Жыл бұрын
I actually love the rainbow sprinkle of orbeez left inside. So cool how different it looks upside down!
@weedconesuer Жыл бұрын
Purple/pink side gives a more bright awake vibe and the blue gives a more ambient nighttime going to sleep vibe. Love it 😎
@TheConwoman3 Жыл бұрын
I think it turned out really cool. I love the lamp series. Crazy how those Orbeez work. 💖💖💖💖
@BensWorx Жыл бұрын
Thanks Connie! Yeah they are pretty cool 😊
@reubenrosenberg7715 Жыл бұрын
Cool! Very cool! Love the "reversibility" of the light. Keep up the great work!
@johannaverplank4858 Жыл бұрын
That turned out so well! Great job. You always have such unique projects.
@BensWorx Жыл бұрын
Thankyou
@joshfowler4563 Жыл бұрын
Absolutely perfectly perfect
@RoxyLegs Жыл бұрын
If the first pour around the orbeez was a darker color to leave the voids left for a lighter colored resin, it looks amazing in my head. Thank you!!! I appreciate what you share!
@BensWorx Жыл бұрын
Thankyou
@JustAnotherBuckyLover Жыл бұрын
Ooof now my skin is crawling all over. I'm sorry Ben, I really tried to give it a fair shot. I'm sure it's absolutely gorgeous if you're not trypophobic. It's in my favourite colours too. I do love that you made it mood-lighting just by turning it over, though.
@BensWorx Жыл бұрын
Thanks for trying, I really appreciate it 😊
@poogie_ Жыл бұрын
Yeah, it got to me too. Trypophobia is just awful, especially when it interferes with a Ben’s Worx video!
@JohnClark-tt2bl Жыл бұрын
You know, this didn't bother me. I think because it doesn't look organic enough. If it had been the inside of a sun flower, forget it...
@JustAnotherBuckyLover Жыл бұрын
@@JohnClark-tt2bl To me, it reminded me a lot of the comb from a wasp nest and good GOD that's awful, especially when it's full of larvae that all move in sync. *shudders* But that's the thing about trypo, there are some things almost everyone finds awful, but others that it just depends.
@scottbolderson1566 Жыл бұрын
I'm trypophobic as well, and there were moments that nearly got me in this video, but I got through it :) Wonderful work, Ben, and thanks for giving us the heads up that we might get triggered. Very kind!
@geoffwarnes9327 Жыл бұрын
Love it when a project comes together ❤
@BensWorx Жыл бұрын
Thankyou 😊
@compub3ar Жыл бұрын
I ain't gettin on no plane Hannibal
@umbrellacorp. Жыл бұрын
Great work. 😎👍💯 I would of been even nicer if the light had a dimmer.
@amandatallis9875 Жыл бұрын
Lovely lamp I like how you did it. I like both ways. Thanks for a great video. Amanda x
@boeamitchell5842 Жыл бұрын
Can you crack the first or second pour to catch the light? That would look really cool as well I bet! Keep up the good work Ben!
@BensWorx Жыл бұрын
yeah it would, Thankyou 😊
@boeamitchell5842 Жыл бұрын
Thank you
@bethaselner71 Жыл бұрын
I like both ends but the blue is good for sleep and for headaches. So i probably would use that one most.
@stormgirl604 Жыл бұрын
Wow it looks great! I’m so glad you did the orbeez. I was imagining you using them as shrunken hard plastic balls not fully plumped in water. Your idea was way better! I like the light both ways!❤
@BensWorx Жыл бұрын
Thankyou
@liefmaston7803 Жыл бұрын
I have a great idea do this again but make a strawberry .This seems to be the perfect texture/look
@wendyjones35862 ай бұрын
As always great video .. I hope things are going well.. Continued prayers ..xx
@lynn7049 Жыл бұрын
I like clear side down the best. It's all very pretty.
@BensWorx Жыл бұрын
Thanks Lynn 😊
@luizgustavo4 Жыл бұрын
Interesting your experience, I have a suggestion, previously put resin in the container and leave it in the lathe turning so that the resin is uniform covering the entire inner wall of the container until it cures, it is as if you were creating a resin container. Only after that put the bubbles and resin. I believe the result will be more satisfactory
@ChiefsFan62 Жыл бұрын
Very cool! I like it better with the clear part on top.
@BensWorx Жыл бұрын
Thankyou
@DarrylWPerry1789 Жыл бұрын
I like blue side down. I do however think you should have left more of the orbeez in the resin. There has to be a way to keep them in the resin without them shrinking & falling out. Maybe if your initial mold was a "doughnut" of sorts where you put a cup in the cylinder and filled the area around the cup with orbeez & resin; removed the cup after pressure pot, then put the resin/orbeez in the larger cylinder and surrounded with colored resin. Might be worth a try.
@juliahyatt5838 Жыл бұрын
Blue to the top is my preference xxxx
@filipecampos6450 Жыл бұрын
I think it is one of your projects that i liked the most!
@THEAPRILFOOL-1983 Жыл бұрын
That is amazing it's amazing it turned out to be that color almost like a ice formation it turned out really great keep it up
@BensWorx Жыл бұрын
Thanks Mate
@THEAPRILFOOL-1983 Жыл бұрын
@@BensWorx anytime
@cherryshrimp2359 Жыл бұрын
Such an excellent little project. The end result is very cool.💜
@BensWorx Жыл бұрын
Thankyou
@cherryshrimp2359 Жыл бұрын
@@BensWorx Yw.💜
@5150gamingz Жыл бұрын
I loved it Ben good job. I also think it would have been cool if you turned it all the way to where the orbees once was. I think it would have gave it a cool look in between all the different layers but good job either way
@BensWorx Жыл бұрын
Thankyou
@aztigerval1979 Жыл бұрын
Love both sides! The all blue side would be kind of cool for if someone wants it on at night. Anyway you can just leave it to be reversible? If not, i love the one with the pink/purple on top. 😁
@patriciahunt9818 Жыл бұрын
Beautiful lamp I like it with the blue at the bottom
@JoeXTheXJuggalo1 Жыл бұрын
That's awesome looking lamp both ways look good but I'll say I like it best with the clear side down closest to the like best.
@BensWorx Жыл бұрын
Thankyou 😊
@debipotts4868 Жыл бұрын
Guess who found the video, lol. Anyway, I love the blue. And I love your videos! But I have to say, your Wasp lamp is my all time favorite! I'm sure there will be more. 🙂
@susanbjorstrom2594 Жыл бұрын
I really like the darker blue side of the lamp! Thanks once again for an entertaining project!
@BensWorx Жыл бұрын
Thankyou
@BLURby84 Жыл бұрын
You have to do some more of the honeycomb look. That’s awesome
@BensWorx Жыл бұрын
Thankyou
@ElaMongrella Жыл бұрын
This looks great. It also makes me think that maybe using clear Orbeez would be worth a shot, since the few that don't fall out won't be so much of a deal then. But it worked out nicely either way :)
@BensWorx Жыл бұрын
Thankyou
@travisg2303 Жыл бұрын
Some mighty fine sound clips in this one.
@MarieBSleepin Жыл бұрын
The holes are super gross, but the happy music at the end gets me every time. How can you not appreciate what was made when it's presented like that?
@parmis69 Жыл бұрын
I love the under pressure sticker
@ericmahoney6007 Жыл бұрын
Evening mode-flip-night mode. Love them both(well love the 2nd one a lil more)
@BensWorx Жыл бұрын
Thanks Eric, yeah definitely a night mode 😊
@doloresandruchow9502 Жыл бұрын
Love love love it and the second side is so neat great job
@talllanky1 Жыл бұрын
I personally like when u flipped it blue on bottom
@margaretmiller4899 Жыл бұрын
That’s a hard choice but I think the bluer light works best for me.
@scottgm321 Жыл бұрын
It’s great both ways but I prefer the dark on top. Thanks for the video
@BensWorx Жыл бұрын
Thankyou
@staceysarian7444 Жыл бұрын
Soo colorful and cool looking
@BensWorx Жыл бұрын
Thanks Stacey 😊
@clairedollin3202 Жыл бұрын
I love the tiny trapped orbeez ❤ great work
@BensWorx Жыл бұрын
Thankyou
@natalialewandowska585 Жыл бұрын
What a beautiful lamp. Fantastic work as always! Looking forward to seeing your next creation!
@BensWorx Жыл бұрын
Thankyou
@1986krazy Жыл бұрын
That is a really cool happy little accident! I think it works as a bedside lamp. Have the white on the bottom when you are just relaxing in bed, and then the blue would be a calming night light 👍
@BensWorx Жыл бұрын
Thanks Alex
@lozking9568 Жыл бұрын
I love this project. I tend to use my lamps at night while I’m winding down in bed so I’d probably use the blue end coz it’s darker but I’m saying that the purple end is gorgeous as well