Best 1/24 Scale RTR Yet! Meet The Axial AX24. Unboxing & First Run.

[@DSMOffRoad]

I’ve been super impressed with ours out of the box. Going to be even better with the servos upgraded with our new mounts that will be available soon 🤘

[@duramaxdad]

Will scx24 custom servo mounts work on ax24

[@matt_flanders]

I wasn't planning on buying one but watching this video makes me kinda want one. It looks pretty capable out of the box and could be really capable with minimal upgrades. The four wheel steer looks fun and adds another dimension to crawling with the 1/24s.

[@UpperLeftRC]

So stoked to get mine tomorrow 🤘🏼😎 thanks for the killer Review Tony!

[@matthewcopeland4441]

As always thank you for your review Tony! Really looking forward to yours on this due to your 24th experience. Excited to see what CCxRC does in 2023!

[@fuse557]

Dude, like 100 runs with jumping and your CEN monster truck steering kit is still going strong!

[@damedcamera]

You got me sold on one buddy! Very capable looking. Great vid 👍 thank you

[@andrewrichey7374]

Back watching again this freezing Wednesday morning, I love my lizard tires they do hook great, that’s what came on Betty

[@GrimJerr]

It may have been a Rocky start, but Axial is going to sell a lot of these when people start seeing them crawling, and get a chance to drive them. Ha ha as I was typing you guys started talking about people test driving them and then buying. ✌

[@JD-tl7ld]

I've been thinking about getting one of these for my 5yo nephew. He likes my scx24 bronco, but it's a pig stock and needed lots of weight down low. I'd like to get him something capable that doesn't need upgrades out of the box. This thing looks like a winner.

[@auxil47]

It took a few day's to get me to stop rolling this thing over but once I got the hang of it I was the roll over king no mo! It is my weakest mini crawler but those bad azz rock lights got me hooked, got a bunch of Axial's now but surprisingly enough I didn't get another XC1. I don't run any of my trucks with mods I figure if someone made it to run like that out the box I will oblige them and meet their challenge, have fun you guy'z enjoy and be careful.

[@lgrc6120]

I want one. love the lights. they are perfect as they are... ready for upgrades

[@CapeCrawlers]

25:10 the AX24 is my spirit animal 💪🏻🤣

[@CCxRC]

Yeah man! It is totally your spirit animal. I had my jaw on the floor watching this flex out of the box.

[@Cbam871]

Awesome video Tony! I also ordered one in green from my hobby shop because you can't beat the crabwalk ability an 4 wheel steer. It's definitely a comp truck. It's awesome especially in the Green look but ill probably get wheels for it an tires. I already have your diff covers too. The dog bones will probably be upgraded as well with new servos

[@ScaledRC]

Really hoping to add one of these to my collection.

[@watsonira7]

I started with an ax24 then got the scx. I would recommend modding the scx first the ax takes some doing to get to a capable point. That said once you brass out the ax it becomes a beast.

[@RCBirds]

This is a great car. Hoping mine'll arrive soon. As long I have to watch the videos of the lucky ones

[@riffraffsrc]

Hi Tony! I honestly think this will be a great platform that's more performance oriented. I have always preferred performance over scale looks personally. Looks are cool, but I prefer my trucks to perform well over how they look. I have the Gladiator and the Bronco and they are beautiful trucks and I totally upgraded them both from top to bottom but honestly I like this platform better because of the 4 wheel steer, lighter body, better performance potential, I definitely will add one to my mini truck collection! Great video brother! 💯🤜🤛

[@duramaxdad]

It’s dope man. 4ws options from factory r nice. Put some weight like diff covers, knuckles, wider hexes, beadlocks and it’s a beast. Swap a rear steer on your gladiator too!!

[@shannoncairns1161]

Back in the day , I had the original AX-10 , flip the shocks upside down , & turn the steering servos around for behind the axle steering ......this will give you more weigt down low without sacrificing grond clearence & give you more clearence at the axle ,ie rocks hitting steering link , . If you run springs do firm in the rear , it will still flex , but it will climb 100% better & eliminate torque twist when climbing , run medium springs up front this will keep it from rolling on steep desents , Also cut each tread block in half so it's like spreading apart from itself like fingers way more grip , that's my 2 cents worth of knowledge for you , have fun !

[@WoodsUnknown]

Great looking rig, I wish they would bring back the 10 scale version it would be sweet. I can't wait to get my hands on one. Awesome video Tony keep up the great work.

[@butterknife_mtb_rc]

I’ve been considering making a comp rig with full steer, crab etc, and this might be the best one for it

[@whiskeyflyer7091]

Flips over easy. I totally removed all the shocks and added a travel limiter to the front axle. Lost a little ground clearance but still articulates well. Made it 10x better. Adding aluminum beadlocks and some injora (KLR knock-offs) next

[@duramaxdad]

Great review on an excellent car. U removed shocks or springs? Did u use fish line on center of front axle to tie front end down & limit travel? Have u tried brass knuckles, diff covers and beadlocks? Super good mods

[@jdsrcs8061]

Ok Big Tony!!!! You sold me, I'm going to the hobby shop tomorrow!!!🤘🤘🤘I wish Axial would have used the same beadlocks that PROLINE uses with the Trenchers.

[@davidzimmerman2478]

Go Anywhere, Go Axial !!!

[@andrewrichey7374]

Super cool Tony, Yep we’re here watching 👍👍😎

[@thejeepinrealtor5742]

As always, thanks for the info and content my friend. That’s crazy capable for the price. I prefer more scale looking rigs but I’ll be getting one just for the 4ws!

[@SeekingTheVerdants]

I would just leave the rear steering always on. Also, I wish you would have tightened up the servo saver right when the guy mentioned it. It would have been nice to see the before and after. Thanks!

[@nicholasstephey8475]

Good video. Can tell you are stoked with this little guy.

[@seansrcconstruction]

That rear steer making it crab sure helps a lot

[@Chaos4Eva1]

Nice video! Just ordered mine and can't wait to use it and compare it to my modded C-10 and the other brushless Scx24.

[@majikfreak]

That's a great review... and seeing all those CCXRC Brass was making me drool!

[@gatorrcgames]

Great video, man. I just got mine today. I just put those same treal wheels on my scx24 jeep. They are great wheels.

[@shepd1999]

Awesome video. Never realized til today that you're in the G.R. area. I will have to make it up to the north end and check out Reaction RC

[@andrewrichey7374]

Yeah buddy will catch you next time

[@Benny71]

Aww man kinda wish I waited,bought the c10 version a couple weeks ago before I knew about this one,I love the little c10 but this one is so much more capable out of the box.oh well,added to cart hahaha!

[@saturnfivehynrgrc581]

Watching this makes me consider the 4WS 1/10th Capra. Good video Tony. The 4WS looks like it introduces another fun dynamic to RC.

[@1996colby]

Bought the capra currie the week it came out the best rc I’ve ever owned for crawling get some metal rims and tcl boggers and it will go anywhere pretty much.

[@DJhunta]

Looking forward to my AX24.

[@caststhrowsbladespews]

I would want a stand-alone lever because then I could use just rear steer if I needed it. That would be the main advantage I would see. The learning curve might be a bit tougher than just clicking a button and then turning a wheel, but it gives you a 4th steering option. That alone outweighs the "learning curve" I think.

[@duramaxdad]

Cool idea. These Stock electronics r better then the switch for adding 4ws to a scx24

[@andrewrichey7374]

Thanks for Sharing, will catch you the next time

[@ScottMcLinden]

Thanks for the video Tony. Cant wait until we can get them in Canada. Not sure if any of the hobby shops in Michigan have them yet? if so I could just run over there.

[@julesverne2509]

I have one of these and it's amazing.

[@sammyboswelldirtybrc7580]

Hey Tony if u go to Walmart in the hair section get u a pack of goodie rubber bands they are assorted size’s add the shortest to the front next size to rear and I guarantee that it will help that rig stop being so floppy 🔥😎👍

[@raymonde.tanneratomic-rc9370]

I had the 1/10 version when it cam out, this 1/24 is flexing like it's big brother, think I my get one

[@lwinter69]

You can just unglue the tires and then mount them on different wheels. Nice video.

[@philsonnenberg6092]

I ran mine for about 10min and man is the CG really high. It is very balanced front to back. The high CG coupled with the long shocks make it pretty easy to tip. Other than that, the typical SCX24 horrible sloppy steering links. Already put upgraded steering links and that made a HUGE difference in steering slop. I am looking to relocate the ESC lower but not sure if that will be possible. Will see later today if a larger 050 motor will fit. I don't have your baby goliath but my other 050 measure a bit longer than the area it needs to go without hitting the links. I don't think it will due to the rear link location. Other than that its going to be a really fun RTR to upgrade and run.

[@duramaxdad]

50 fits

[@GrimJerr]

I think it is nice to have another 24th scale option, and while not for me it is nice that those who do not wish to build these little joys, can still enjoy a fully capable

[@duramaxdad]

What’s the ultimate?

[@hilltoprccrawlers1979]

Hey Tony, great video. Informative as always. You could try the shock mod by Texoma RC. I think it will control shock unloading and lower the rig ride height a bit. Best of all, it's a FREE mod. We all love FREE! :)

[@duramaxdad]

Can u explain the mod?

[@johnlujan8706]

Thank you for the great review! I might get one. Interested in seeing how others improve these.

[@duramaxdad]

Brass knuckles, diff covers, beadlocks, servos, wide hexes and it’s a beast.

[@GreatLakesRC]

Awesome! It handled really well at Reaction 🤩🤩

[@jimbo4203]

I like all the axials and I know I'll like this one too

[@ShadowsFirst]

I finally get my SCX24 setup pretty decent, make a couple vids with it, and bam, they drop this lol.

[@robgoffroad]

I got mine yesterday. It's cute. It needs a LOT of work to be truly excellent, but I expected that. The shocks are AWFUL... already ordered some new ones. The servos are extremely weak (ordered servos too). Upside is a LOT of SCX24 parts will fit this thing. I'm trying to figure out which Furitek parts I need to do their motor swap and then use an FS-BS6 receiver so I can control the rear steering separately.

[@duramaxdad]

What shocks u order? Scx ones?

[@CaseyD406]

Let us know if the Chihuaha will fit these. Definitely enjoyed the video and can’t wait for my LHS to get mine in.

[@KurtsRCs]

Great review looks like a good truck out of the box

[@bcochener]

Did I hear you talking about love for another tire other than the Scrambler??? Wha, wha, what??😅

[@raymonde.tanneratomic-rc9370]

Looks awesome, needs some brass down low

[@slinkshreddy2654]

That cape crawler flex 😹 love the vidss

[@gustorres9856]

the rear suspension fell apart after owning the truck for one week there taking bsck and giving me another one

[@tiam4152]

use a heat gun to loosen the glue and safely remove the tires from the wheels :)

[@RcMonkeyGarage]

Hey, very nice video 👌🏻 I have a question, I come from Germany but I find the CCXRC parts so hot that I would like to see them on my cars. Do you also ship to my country if I ordered something? Greetings from Germany 🙋🏻‍♂️

[@RCBirds]

Das würde mich auch interessieren. In this I would be interested, too.

[@1734Glock]

Do you think a complete Furitek upgrade would work in the AX24? Interested in going brushless and getting electronics as small as possible to shave weight on top. Does the 3rd channel make it more difficult to do?

[@bobbymulwee7641]

They should have re-released the 1/10 AX10. Hopefully if this version sells well they will.

[@slamboy66]

You said it was a Spektrum, will it bind to a DX6i?

[@Daniyoyo]

What’s the difference from ax24 and scx24 , their both by axial ?

[@dexxeve9420]

Thanks for a cool review :) If you consider the additional price of also getting a more powerful motor and brass weights to stabilize is it still priced okay or little much ?

[@goreyboggs]

Pretty sure you know the answer to that! Lol.

[@dexxeve9420]

@@goreyboggs no not really seems bit pricey once you add those things

[@goreyboggs]

@@dexxeve9420 I totally agree, it’s not scale looking & needs lots of money in upgrades. I think axial should do much better on what they are bring out

[@julesverne2509]

I've driven the crap out of mine and it hasn't broke yet

[@gom4ngo745]

Awesomesauce!

[@FatKayakAngler]

I'm looking at getting one for Christmas. Do they all come with 4 wheel steering? Another question is is there a difference between the different bodies, are all the chassis the same?

[@CCxRC]

AX24 are 4 wheel steer in either orange or green. The SCX24 models have different chassis and are only 2 wheel steer.

[@FatKayakAngler]

@@CCxRC thanks for clearing everything up for me

[@Gmcworrior1]

Redcat did this first with the sumo line back in 2012

[@CCxRC]

They did. From what I've seen though, 1/24 didn't take off until the SCX24. So using that platform to go back and re-introduce a comp crawler style 1/24 is timed well and using available upgrades from their popular lineup.

[@hpnc81]

What length are the link lengths compared to other scx24s? Width? Offset wheels?

[@duramaxdad]

Width same as sx24 as it has identical axles. Not sure on arm lengths

[@gagebenson7898]

It’s just the body and tires I don’t like but tires get replaced regardless. I totally get the guys that love it because they had the 1/10 scale version or if you just love it because you do I don’t blame ya, just not my taste

[@majikfreak]

Holy Damn! That's COol...

[@shuster1921]

Kool Review Brother, but I just wish they get off these 24th scale stuff, parts are to hard to work with. Drop a nut, washer, etc say good bye!

[@CCxRC]

Why? Tons of people like them. You’ll get what they got coming for the bigger stuff. They haven’t really innovated with these yet. It’s been lipstick on a pig for years. Same chassis with a new body. Zero design time. This is a new item for us. Let us have what we want every once in a while and you’ll get yours soon.

[@BPlus-oz7cm]

Any chance those boatside sliders will fit the scx24?

[@CCxRC]

Not without some drilling

[@backyardr.c.channel4732]

How does it compare to the Fms fcx 24?

[@CCxRC]

FCX24 wasn’t great out of the box. I got a false sense of hope on my little course I had, but on this track it wasn’t good at all. Especially with stock tires. I haven’t used it since trying it at reaction. Not my favorite platform. I’d rather run the SCX24, TRX4m or HobbyPlus.

[@backyardr.c.channel4732]

@@CCxRCThanks you for your honest feedback man yeah the ax24 looks cool man I might have to get one. RIght now I got 2 scx24s and one fms24 I really am considering the furitek cayman pro too!

[@jamesmcmillan6006]

how fast are they ?

[@THEhwCOLLECTOR]

Deff could use some softer tires then I think it'll dominate!!

[@CCxRC]

Tires definitely were awful

[@THEhwCOLLECTOR]

@@CCxRC Waiting to get my hands on one thanks to you hahaha 🤣

[@julesverne2509]

The links are not the same length as the other Axial 1x24's unfortunately.

[@CCxRC]

Correct. It was redesigned with similar length front and rears and a different mounting point.

[@rcjoe406]

People get but hurt over a box of spaghetti now a days ....old school rules rule

[@seniorxj2931]

Does anybody know if they make a 1/24 scale Jeep XJ body??

[@KurtsRCs]

second

[@vbspeed7571]

Yup the beast out the box. Hitting the real 🪨's tomorrow with it😊🖐✌️I got the green one with that new brass, Hopefully someone can send Some updated Servos 🤔🤣🤣🤙👍

[@MIDLANDER31]

But the real question is... can we make a monster truck out of it?

[@sonnyblack6854]

Better buy in 2023 traxxas trx4m ❤

[@CCxRC]

Unless none of your shops offer crawling for them. I buy these because we have fun comps for them.

[@ToGrimmToWin]

Until fms fcx24 gets a version as that 2 speed and portals kills my scx24

[@ChordsofPower]

limiting straps. it screams, "install a limiting strap!"

[@normhienn1881]

I’m not sold on that thing yet.. Not sure if I ever will be.. Looks like a Redcat knock-off..🤷🏻‍♂️

[@CCxRC]

It looks like the axial they made 16 years ago shrunk down.

[@smallkrawlzrc]

First

[@1980prostreetcutlass]

To bad the aftermarket isnt in the game yet

[@TheLilhulk1111]

Price is to high

[@VinceBurroughs]

They definitely paid you to say that lol

[@CCxRC]

Nope. I paid my cold hard cash for 3 of them. Have you driven a stock SCX24? It’s not hard to be better than one.

[@funkenshrumn]

never pick up a knife again....ever....lmao

[@CCxRC]

Danger Danger

[@ADHDNME777]

Top heavy poorly designed torque twisting junk in my opinion.

[@kevinbreaker2683]

Looks like a pretty good truck ,,,Crawler👍🫡

[@ironj100]

HEY MR CCX RC . HAVE A QUESTION. I WAS WONDERING IF YOU HAD THE PROBLEM WITH THE Traxxas TRX4 M mini crawler With the O Rings Falling out. I know there’s the stink wrap fix. But are there OTHER HACKS TOO DO. OR IF YOU HAD THAT PROBLEM. IM NOT REALLY GOING TO CRAWL MUCH WITH IT. MAINLY TRAILING. SORRY TO BE OFF SUBJECT.

[@CCxRC]

I haven’t had it pull off yet. I can see where it’s dragged on rocks, but I’m still good

[@ironj100]

@@CCxRC YA I HAVENT USED MINE YET. THEY SAY ITS A PROB. BUT I DONT SEE A CRAZY AMOUNT OF VIDEOS. JUST A COUPLE. I USED . So I used PTFE THREAD SEAL TAPE.

[@ryanlsorrell1983]

Did you really just say a mini RC truck has a Jake break? Lol are you a fellow trucker sir?