HTRC B6 V2: bit.ly/355V5Ea XT60 Charger Boards: bit.ly/2FV5pEv XT30 Charger Boards: bit.ly/2FV5pEv Get Your Premium FPV Shirts: shopdronemesh.com/product-category/fpv/
@ominousnefarious591925 күн бұрын
I have this EXACT HTRC charger. I have had it since 2020. It still works great. I have tested its accuracy against an HP bench oscilloscope and Fluke Multimeter. The tolerances are absolutely acceptable for such a bargain charger, and better than most including my Traxxas 6amp charger based on the same SkyRC B6 V2 PCB these are both built upon. This charger provides all the features in the original SkyRC where the Traxxas does not, like reading individual cell resistance which is very important for monitoring battery health! So after over 4 years of use this little charger has more than paid for itself and outlasted a couple other much more expensive chargers.
@mike_t_0073 күн бұрын
Thank you. Just bought one on Amazon, and with all the mixed reviews, it's hard to tell if it's safe or not
@marshal7102 Жыл бұрын
Also wanted to mention that I fried mine with a static charge from my finger. I had mine charging a battery once and I had static build-up and did not know it until I touched one of the buttons and a spark from my finger totally fried the unit instantly. It was a very strong spark and it was over. So be sure you discharge all static if you are in a high static environment.
@travis.stevens4 жыл бұрын
I have a similar charger (may be a re-brand). Only really use it for balance charging. Need to explore the other functions. Thanks for the review.
@archer49224 жыл бұрын
Love my b6 v2. I’ve had mine over a year and a half and the power supply is just now starting to give me fits. Like if I bump the power cable the charger will reset but as long as I leave it be it’s fine and charges well.
@thaddeusj834 жыл бұрын
was the first and only one i have bought and i reccomend it!
@MoppelMat4 жыл бұрын
I got one of these in 2004. dont know how that relates to „new“ but hey, they added a feature in software or two...
@Asu014 жыл бұрын
Just my opinion but I don't see any reason to get this charger over Toolkitrc M6. This is based on the ancient 4 button charger, with added features. The M6 has more features, higher power, more compact, better interface and the list goes on. All for nearly the same price. The only thing I like from this charger is the passive cooling that comes at a cost of bigger physical appearance, which I actually wouldn't even trade with.
@SmallsFPV4 жыл бұрын
What power supply do you use for the M6?
@Asu014 жыл бұрын
I don't own a M6 myself, but for my charger I use some random 19V 8A power adapter I have laying around, @@SmallsFPV.
@Asu014 жыл бұрын
Yes, @bojo perez. Set on Pb and 6S, charge current should be 1/5 of battery capacity.
@Asu014 жыл бұрын
No, @bojo perez. You'll have to look on the specs of the battery and work from there.
@Asu014 жыл бұрын
Any hobby charger will do, @bojo perez. I think those that accepts AC input is more suitable for you. No need to source external power supply.
@user-in1gn6fw2eab4 жыл бұрын
Get well soon. Great review as always.
@benjiebarker2 жыл бұрын
mine just keeps saying battery disconnect i saw your vid and decided to cut the wires and connect the banana plugs to the clamps. it works now 😀
@jalee65872 жыл бұрын
I had the b6 ac from like 4 years ago. And it charger everything nimh as well
@lenny0272 Жыл бұрын
Got one on Ebay for 30 bucks. I know how to use it now. Thank You
4 жыл бұрын
Ordered, thanks man!
@mongofpv37444 жыл бұрын
Sounds like you got yourself a cold ? Thanks for the review
@DroneMesh4 жыл бұрын
I had very high fever last couple days.. Thanks for noticing :)
@mongofpv37444 жыл бұрын
@@DroneMesh Hope you start feeling better soon bro ! Take care of yourself !
@niius76634 жыл бұрын
You can buy the same temperature sensor used for the sky rc imax charger,it works great
@CDavis-lk7sc3 жыл бұрын
Nice review - thanks for that!
@michaelsanderssa4 жыл бұрын
I got one of these. Out of desperation I charged my car battery 😀
@aldograsso58729 ай бұрын
Thanks for the tutorial, very useful. One question: if I want to calibrate the charger, what is the procedure? Thanks again
@jmillerfpv3 жыл бұрын
I just got this charger in the mail! Looks nice. It costs 50 now
@xoutburst91004 жыл бұрын
i just bought this same charger on amazon for 18 bucks new never mind mine is the v3
@Shah_creates4 жыл бұрын
V3 of this is out and I bought it! I wonder what the differences are from this.... I am new to this world.
@Shah_creates4 жыл бұрын
V3 of this is now out on Amazon! I wonder what the differences are.... I am new to this world.
@Shah_creates4 жыл бұрын
V3 if this is now out on Amazon! I wonder what the differences are.... I am new to this world.
@nabinbhandari90823 жыл бұрын
Thankyou for the review Dronemesh. Does it charge 90WH lipo battery as well or its limited to 80W?
@MCsCreations4 жыл бұрын
Awesome review, Sam! 😃 I have the blue version, but I don't use it anymore... Because I guess it's a fake. It destroyed 2 batteries of mine. 😬
@hanquah4 жыл бұрын
I have same fake blue imax b6 also. My 4s is broke after few charge. Maybe battery is defective or maybe this fake @ss sh**t broke it. Now in dilemma whether to use it on my new lipo or not. So whats your opinion about this fake blue charger? I use 1.5amp ac adapter before. Now i purchase 6amp power brick to use with it. Now i rarely do fpv due to busy working..whats ur recommendation for great budget charger u see fit for keep 4s healthy?
@MCsCreations4 жыл бұрын
@@hanquah Dude, I won't use mine anymore. I bought a ToolkitRC M6 and I love it!
@hanquah4 жыл бұрын
@@MCsCreations ahhh i think i gonna go for htrc b6v2 1st then buy m6 also. Thank for replying man
@MCsCreations4 жыл бұрын
@@hanquah Absolutely no problems, dude. Whenever you need. 😊
@Theo-mb2dd4 жыл бұрын
@@MCsCreations hi sorry for disturbing, in new to rc. I saw the m6 and it seems very good, but i ve only seen peaple charging with big lipos in the input side. Can i just use a normal plug in my walls to get power? If yes, will the m6 work with a weaker input, like with the cable i use for my phone?
@beltonator8 ай бұрын
Hello, can this charger still be recommended? My son got an RC model for Christmas and I need to look for a good and inexpensive charger. Will this purchase be a good one or should I look for something else?
@1ohmwrecker2 жыл бұрын
They don't give you the car clamps to power it anymore.
@dustinplee50673 жыл бұрын
It seems simple can I just use a balance board with a xt60 with the charger ports and can I charge more than one battery and if they have the same voltage and same cell and on the balance board if it comes with another plug can I just use the white balance plug not the other plug that comes with the balance board
@scottw403 жыл бұрын
Mine will not for some reason charge my 6s LiPo battery for my aircraft
@jjmcelroy12113 жыл бұрын
Im still trying to figure out how to carge my 4s lipo with this when ever i hold the start button to start it starts to beep a tell me to disconect
@dnadnadna7432 ай бұрын
v3 +ebay = countefeit not working no display
@viv86872 жыл бұрын
My battery is 9.6V 11.7Ah LiFePo4. What setting should i use please. I keep getting low voltage or high voltage.
@FM-fn7eo3 жыл бұрын
I have one like this and everything works except, charge in balance mode and balance battery . Work couple seconds and then on the screen at mah shows 0 and stay like this hours . In simple mode charge in series reach's at the end, but in balance mode charge or balance battery do nothing . You tasted yours it's ok ? Thanks
@Elm1153 жыл бұрын
Congested.
@robertkerr85523 жыл бұрын
did you catch your train?
@chrisscotty45183 жыл бұрын
Does the 3,2 v not destroy the cell by discharging a lipo, why they set it so low? 3,6 max dosent it?
@nosky_4 жыл бұрын
FYI your charger board links are the same
@JunaVisual4 жыл бұрын
is this possible to use on dji batteries?
@ocelee77944 жыл бұрын
Looks like a fake of Skyrc? Can you do a more detail test of it accuracy like the individual voltage and also current while charging. Will get a few if its accurate.
@gojomodu9934 Жыл бұрын
Could you plug multiple 3s batteries in the 3s/4s sockets. Just asking because my balance leads on my balance board doesn't work but the xt 60 ones are ok. So i would use my board to balance xt60 and plug two batteries in those ports. Just using the first 3s pins out of the 4s port for example
@mrpotiontv2249 Жыл бұрын
How do I charge a 7.2 lipo with deans connector?
@FM-fn7eo3 жыл бұрын
in balance mode descarge, capacity is /total, not /cell . its true ? so you can't check capacity, just one by one
@yashasranjan84974 жыл бұрын
I had a Original IMAX B6 Mini on which the display suddenly started showing weird characters instead of alphabets an year ago and so it is not usable now. The only way left to use it is to connect to a PC and use the SKYRC software to set the modes and monitor the charge via USB. Since then I do not trust chargers of this design at all...
@ocelee77944 жыл бұрын
Most likely is a faulty screen which can be purchase from electronic components shop and replace it yourself
@nothingbutthetruth7900 Жыл бұрын
Can this do capacity test ?
@nugrahabayusamodra13622 жыл бұрын
what the power suply adaptor specification (output voltage and ampere)?
@hanquah4 жыл бұрын
Hi is gold color scheme is same as black color like the one u have? Saw it online store only gold color but no black colors. What is wrong? Thanks
@DroneMesh4 жыл бұрын
The gold is black for some reason.
@hanquah4 жыл бұрын
@@DroneMesh im going get gold color then. Thanks again man
@robertholsopple94514 жыл бұрын
Just ordered the V3. Wonder what the difference is?
@the406seadonkey6 Жыл бұрын
Same here in August of 2023. Did you find anything out? How did it work? Thanks in advance if you see this.
@TheShopGrandOpening2 жыл бұрын
I have this same B6 V2 but in Gold plate. When I used the storage/discharge function, the entire unit metal gets hot to the touch. Does anyone else have this issue?
@saimkhanafridi2 жыл бұрын
It will get very hot naturally because of current dissipation through heat. Use with caution ,batter use with a fan or something like that.
@marshal7102 Жыл бұрын
Just what i was about to post myself. YES mine gets extreemly hot when in Storage Mode. Almost too hot to touch!!!!
@BurgerurgerFPV4 жыл бұрын
Does yours spark when you plug it in?
@marshal7102 Жыл бұрын
Yes, but plug in the banana plugs before you connect the AC
@fransrcgarage69973 жыл бұрын
Can it charge 6s lipo?
@2dartss3 жыл бұрын
Yessir
@pooluop2 жыл бұрын
DON'T BUY IT'S A FIRE HAZARD storage charge it gets very hot screen discolored with the heat bin job
@joeistheg.o.a.t84562 ай бұрын
It’s garbage. Mine doesn’t work
@mrguppy1016 Жыл бұрын
Lol dude u lost me
@z00n4 жыл бұрын
Can you take it apart and tell how good is it from inside? Have you heard about cheali-charger? github.com/stawel/cheali-charger
@FuriousHondaBoy18 күн бұрын
This is POS, is just die after 2 years without any reason, last day start to act strange, don't see battery, and now won't work. Don't buy this charger, you will regret. Even fake SkyRC is better. First time buy fake sky rc mini version but because of manufacturer mistake when connect serial port its fries it self, fix that and second time fries with over rated current trough it, I know last time is my mistake but this charger HTRC have bad work from start, storage mode is very bad, its rise voltage up to 3,7 per cell and stop, B6 mini is work that very well by maintaining voltage with very low current up to 0,1A and 3,7 or 3,8V then stops . And like that last days got couple time warning about battery disconnect, restart and work ok but now no more work with any tipe of battery charge, discharge, storage, power mode...nothing....
@Shah_creates4 жыл бұрын
V3 of this is now out on Amazon! I wonder what the differences are.... I am new to this world.
@Warwickadventures4 жыл бұрын
higher wattage and can charge battery up to 6A per second