BEST ATX Mini Tower With A Monitor Jonsbo D41 Mesh Screen Review & Unboxing

[@mikesunboxing]

Available from affiliate links: Amazon Local: amzn.to/41J2tSw Ebay UK: ebay.us/qcCs0t Ebay US: ebay.us/Mxw60k Ebay CA: ebay.us/eQu5V1 Ebay AUS: ebay.us/oZx0If

[@rickh8380]

Nice looking case for sure. I really like the white coloring of this case. I can see a lot of thought went into the design. Can't wait to see you do a build in it on the Live Stream. Great review as always from the Dynamic Duo. Take care, cheers

[@mikesunboxing]

Cheers Rick

[@baggatxips.6053]

Oh dear Mike, you have done it again! Now I want do do yet another build using a case you have featured. I haven't even sold the setup in the MSI Mag Forge 100M yet!

[@mikesunboxing]

get your wallet out! 👍

[@SuperVyhul]

I have this case and its absolutelly fantastic, airflow is superior, design just beautiful, lot of space for so small case its just mindblowing. Price is for this case is just small. Yeah i never have better case. Thank you for showin this case to peoples, cause this is how excelent case look.

[@mikesunboxing]

Couldn't agree more!

[@nicholasrodriguez2256]

I’m actually using this case in a upcoming build this helps a lot!

[@notmatt5864]

Great video! Been waiting for a full review of this.

[@mikesunboxing]

hope you enjoyed it and got the information you needed

[@PaulBakewell]

I really like this case. Great video thanks Mike.

[@mikesunboxing]

yes it is a cracker!

[@WilliamAndrewPhilipBodie]

It really look very cool & stylish. Mike's Review & How to is Worthy of a Support comment. Like & a share 🙂

[@mikesunboxing]

cool and stylish, just like you mate

[@WilliamAndrewPhilipBodie]

@@mikesunboxing Thank you very much Sire Mike. the cool thing is gone. till i find a way (and have the time for it too) to sent things over. got alot.

[@mikesunboxing]

@@WilliamAndrewPhilipBodie You're too kind!

[@mikeforce5926]

Great video. Lots of possibilities.

[@mikesunboxing]

thanks mike

[@uglybob7505]

Had this on me radar for a little while and was considering sending one in for the channel. Was worried that the screen would be too small to be used as a monitor and too big to be used for system metrics......however watching your review of this I think its just right....can be used for either. The white one doesnt look too bad either. Thanks Mike and Kath, interesting product (remember the mouse with a tiny display !!!) 🙂

[@mikesunboxing]

still got the mouse here with the beavis and butthead screen on it :-)

[@adamc8887]

Great case for ATX builds, great review! I am sold. Off to the local shop to grab one. :)

[@mikesunboxing]

Hope you enjoy it!

[@chris_hertford]

Very nice looking case! Front I/O reminds me of a MAC, the screen is a really nice feature!

[@mikesunboxing]

👍

[@arielis78]

Wondering what the slot on top of the case near the screen side is used for? Is it to route fan cables if for some strange reason someone wants to mount fans on top of the case? Possibly an AIO push pull configuration? But then you wouldn't be able to put the top mesh cover back on i guess? Wouldn't really matter probably since dust would just be blown away. Also, there's so many options to Diy add additional screens like for example right on the side psu cable shroud panel.

[@kaisersolo76]

I think i found my dream case do a build plz mike

[@mikesunboxing]

will you go with the white version or black?

[@JoshWhitford91]

I too would like to see a build! I'm upgrading from a Strix 1080ti to a tuf 4090 OC. I need more room than the enthoo evolve offers and this case will fit nicely in the same spot!

[@mikesunboxing]

@@JoshWhitford91 It's on the list to do... 🙂

[@lonvaleroso5526]

I like this case, an all mesh build for the sides would be nice specially if you're going to use this as a server.

[@dorientjewoller113]

Wonders why cases with mesh side panels (instead of tempered glass ones) haven't passed a review yet. Some models come to mind like the Aerocool Cipher S-BK-v1 or Azza Aero Midi. Just to know if this mesh side panel has an impact on cooling potential.

[@JoshWhitford91]

Subbed and belled for the build stream!

[@mikesunboxing]

Legend!

[@yorkshireplumbing]

Shame they didn't include a little bracket to mount the screen internally up against the glass side. Maybe there's a DIY way of doing it. ASRock sell a side panel screen kit.

[@mikesunboxing]

yeah that might have to be a diy option at the moment

[@mikep9418]

I'd be interested to see how Windows deals with the extra screen. I installed a similar one in my 4000D and whenever I went into bios it would be the default screen. A little bit small for my old eyes 🤓

[@mikesunboxing]

Yeah bios tends to favour hdmi screens, if the main larger desktop is dp then the hdmi will be used

[@MrRoro582]

I had already bought the Asus AP 201 case but I would have bought this if I had not already got the ASUS case. Is it me or this case similar to the ASUS Ap 201, other than the screen? Yes the ASUS is full mesh but he layout of the Jonsbo is similar.

[@mikesunboxing]

yes the layout and form factor are very similar

[@SpoonHurler]

With such a good chimney style cooling design I really like the none mesh version in the front and then just toss a pair of high flow 140s on the bottom and a 280 AIO on top (or two more 140s if you go air cooled. Keep all that air flowing up. Looks like it will be similar to the AP201 and be great for keeping really hot GPUs cool.

[@A-swetBlogspot]

you can check out the Jonsbo D40

[@MaskedOG]

I´m just concerned that with the way the PSU is mounted my Atx PSU and a 360 Aio will block my future 5090. Since you need bottom fans as well for decent temps.

[@luckyman1324]

wow i like the screan may just get the screan

[@mikesunboxing]

it is pretty cool and not a bad price really

[@DavidUnderhill]

nice case and available in aussie for 159$ (incl gst) == 92 gbp (incl vat) so very affordable

[@scrunts666]

It would be better if they isolated the front, made it solid and used that front space for the PSU and hard drives. Then just use the rear area for 2x120 or 2x140 mm fans top and bottom. Perhaps even do away with the 120mm mount on the back and just have a nice clean bottom to top air flow.

[@priteshpatel6053]

Might be a silly question, but can the screen not function directly from the motherboard? I suppose maybe for power but not display?

[@mikesunboxing]

if you have onboard graphics you can use that to provide an image and the motherboard can also power the screen

[@Senrab46]

Love the case, so many thoughtful points and price not what i expected! Expected u to say sfx psu so win win imo. Only one question, thought most gpu even mbs only had one hdmi so do you convert a dp to extend your display settings? Look forward to build, thanks for reviewing Mike and Kath 🐈👍

[@mikesunboxing]

You can use a cheap do to hdmi adapter, they cost about £5 on amazon

[@wheelupmedia9736]

Hi sir what case do you think much better option lancool 216 or the jonsbo d41 I know already that the lancool216 is the case to go because of the airflow but the form factor of the d41 is what I been looking for , planning to use a air cooler in my build 😊😊

[@mikesunboxing]

either is a good choice, the D41 will save some space if that is a concern

[@herc1319]

Is there anyway to make a Eatx motherboard fit at all 😊. Like what if you remove the part that removes the recessed section

[@mikesunboxing]

possible i guess but it will be tight

[@coreymckeever3308]

If this case is chimney style cooling, would having a mesh front panel help at all with cooling? Trying to decide which version to get

[@mikesunboxing]

not really, maybe some additional passive cooling depending on internal case air pressure

[@coreymckeever3308]

@mikesunboxing thanks might just get standard version then

[@otimo144]

Ya I'm gonna use that screen for wallpaper engine.

[@mikesunboxing]

that is a good idea

[@WilliamAndrewPhilipBodie]

2 time i see it. and feeling like James Bond. seing Q show of the cool gadgets 👍

[@mikesunboxing]

cheers William

[@Garrett1974]

Could you use the screen with DisplayPort using a HDMI->DisplayPort adapter? Since I only have 1 HDMI on my 4090 which goes to my LG C2 screen 😅

[@mikesunboxing]

Yes you can

[@uglybob7505]

Crap joke Friday !!! I didn't believe my dad was stealing from his job as a road worker....... But when I got home all the signs were there !!!!

[@mikesunboxing]

lol holiday bob sliding in with a cracker

[@uglybob7505]

@@mikesunboxing it's an oldie but a goodie

[@Mr.McWatson]

The D31 is the mATX version, correct?

[@mikesunboxing]

yes that is right

[@Choconuss]

it would be nice if they had made as you can stick the screen onto the side, since its removable!! cuz having it on front defeats the purpose on having a nice view into the pc! cuz u cant rly see both sides at the same time

[@mikesunboxing]

yeah that is true

[@Synthematix]

So nice, but white! damn that just ruins it, having said that white is the easiest colour to spraypaint to your own taste, id probably do it gunmetal

[@kennyd7667]

I mean there is an all black version

[@mikesunboxing]

yeah the black version i think is sleeker, but filming black cases can be tricky and i wanted to show the case in it's best light

[@Noodlepunk]

I have been doing a lot of research cause I house sit alot for weeks on end and bringing my main pc is just a pain since it is giant. Lol Its a Phantek Eclipse P600.

[@mikesunboxing]

like it!

[@coreymckeever3308]

Can i use a itx motherboard in the d41?

[@mikesunboxing]

Sure you can if you want to

[@coreymckeever3308]

@mikesunboxing thanks again! Everywhere I look, it only says atx and matx.

[@patricklebel1141]

could be nice if they included a " how to built a computer" video in rom so no need for watching youtube video like "building computer for the noobs"

[@mikesunboxing]

that is a very cool idea

[@0views372]

Can you fit a sfx psu in this?

[@mikesunboxing]

Yes but would need to use a Sfx to atx adapter plate, but these are often included with Sfx psus

[@Doobie3010]

all we need is Gamemax to make import these under its own brand,as with previous Jonsbo cases as their "sparkle" brand.usually cheaper.

[@mikesunboxing]

yeah you never know, it might happen

[@mikebaker2927]

Please do a build in this case, but don’t stream it. Those live videos are just too long.

[@mikesunboxing]

I’ll see what I can do

[@Ober1kenobi]

You could make a wicked powerful Steam Deck and just use the screen on the front

[@mikesunboxing]

lol yeah that would be some awesome emulation