Best CB microphone?!? ⭐First Look⭐ Stryker SR-76NC...it's got the goods 😲

[@TheRadioGarage]

Buy here www.theradiogarage.com/product-page/stryker-sr-76nc-electret-noise-cancelling-microphone-4-pin

[@mattpace5982]

You need to get rid of that new president radio and get you a rci galaxy or a Stryker or a longhorn radio Those radios that I mentioned will do more power then that new president radio I know this I have been in the radio hobby for many many many years

[@rkelly5803]

​@@mattpace5982lol.

[@Dingleberry1856]

@@mattpace5982 Based on your comment I will be purchasing a President Washington. Thank you for your assistance.

[@DAVE_WHITE]

I worked with them for many years to get this to market Hope you enjoy it!!! it was to improve on the palomar that did not have a decent battery holder, and did not have Gain and TONE adjustment So those items were added into the Stryker. if it seems tinny to you adjust the Tone control Matt!

[@TonyReilly-mt7uu]

Thanks for the demo Matt. Appreciate your efforts and getting good info to us. That mic sounds good, sounds like it has more presence than the stock one. Look forward to hearing it on a Quad 6 and maybe an SS148, a couple different radios like you mentioned. Thanks again, have a great day. PS. I will continue to make purchases from small business owners. We all need to support small business as much as possible.

[@TheRadioGarage]

Great point about supporting small business owners, I really appreciate that and try to do the same.

[@paulwright7551]

Great job! Here's the deal, after 37 years in broadcast radio I can tell you a CB has less low end than a phone line. This is why talkback sounded lower than transmission. Typical 300 hz is not as low as a good phone line. Get what you can in the lower end. I am a broadcast radio engineer, and I can tell you low end is the gatewatway to apparent loudness.

[@TheRadioGarage]

Thanks for the insight

[@nhbowtie]

I just ordered one of these for my Galaxy 959... can't wait to try it out.

[@AndrewHCann]

Excellent video Matt :) nice hear a new microphone made by different company too and sounds like to!

[@r.d.1056]

Thsnks for the video. I Bought one immediately. I loved my SL41's. I also ordered a Superstar SS148PRO from you over the weekend.

[@TheRadioGarage]

Awesome, very much appreciated

[@r.d.1056]

​@@TheRadioGaragemy pleasure, I like your work. Contact me when you get to my radio, I probably want to add the wideband mod to work better with this mic..

[@Maine307]

i actually have one of thse old palamar mics, still in package box.. i never used it, i thought it was not a good one and kept it in the spare parts box my dad gave it too me..long time ago... i need to get it out and see if it still works.. i had no idea.. wow .. man.. i always learn soething cool watching ur vids!!

[@markviers998]

Like the fuller sound but wonder how it would work with someone that has a deep voice. I never could get the old Tuner Super Sidekick to sound right with my voice, everyone always said it was too bassy. Still, it's good to see someone coming out with an electret mic, now let's see someone make a electret desk mic.

[@nypatriot7563]

Looks nice Matt.....I just ordered one.

[@TheRadioGarage]

Right on! 😁

[@FloydThomasIII]

Great video and review. Thanx 👍

[@Ms45forlife]

Looks like a shure Shure mics sound good

[@Walker_328]

The Stryker mic has a very narrow bandwidth on the spectrum. Not a fan, but a cool mic.

[@douglassheffield6300]

I think it’s a great option if that what you want

[@carl_47]

Nice work 👍 I recommend a video for the President Digimike NRC. It’s awesome 🤩

[@donaldrizzo8373]

Great video bro

[@TheRadioGarage]

Hey 👋 thanks

[@jsanvoots]

Can a 6 pin end be put on the cord and the mic modified to have up and down buttons put in that work with the president radios?

[@KE8ODY-WV-Ares-Ham-Dad-3O4]

What mic would you recommend for the 980sb

[@davidatkinson6267]

Hey Matt what do you think about this Mic on a Stryker 955 fully modded?

[@SharpShooterCO]

Sounds great... Much more of a "full" sound, approaching a studio mic setup. I do like it with more high tone... Thanks Matt, and keep on doing YOUR thing 👍

[@jasonbabila6006]

I’d like to get a SR-76NC to do a comparison with my Palomar mic, I also have a new Palomar external speaker that I haven’t used yet.

[@DavidReyes-1970]

Where do you have your echo on that president radio set at????? Sounds great.❤

[@TheRadioGarage]

Yes took a while to get it dialed in, they are a bit touchy 😁, I honestly don't remember the numbers for the settings though

[@ironhead320]

Sounds better with a little more highs

[@Xxradar007xX]

When will you be accepting new repairs?

[@mred3660]

Rebranded Shure hand Mic that’s why they sound good if it is the sl 41 then there is some adjustability inside

[@CaptainD717]

They went fast ,I put my email in for notification 73zzz

[@santhinyprato4180]

Y have a question can you please help me out what those wideband transmit receive means

[@BEN-HUR_trucking6815]

That hum don't work for me

[@DanielOrtegoUSA]

Reminds me that I still have a SL41 new in the box in my parts cabinet. Frankly, this thing doesn’t sound near as good as the Palamar. 🤷‍♂️

[@TheRadioGarage]

@@DanielOrtegoUSA could be the radio in using it on or my phone speaker not being able to actually replicate the sound, as the audio I'm hearing is actually very nice

[@hillbillytarzan]

That President mic would be better for DX and the Striker mic for rag chewing

[@Hydrostream1972]

President mic. Sounds better.. Heavy on the highs.😊 cut through that white noise when in the weeds when transmitting 😊

[@duaneshuster6366]

Need battery powered tone mics all noise xancelers cut audio to much good for truckers with no AC .

[@r.d.1056]

Not a clone. The internals are entirely different.

[@paulwright7551]

You didn't do it wrong, but like showing us a wave form on a scope, record the PA output and show us the wave file difference on a computer. Then no matter how crappy a person's speakers are, they can see the difference.

[@stonefacedgrasshopper2200]

"Crappy Duty" LOL! ELECTRET... So why the 4 pin? I had to smile when you called it a "Palomar" mike during the talkback check!! It IS an improvement over the stock mic. But if you could add a touch of the highs in the mix, it would sound like a Ranger 198, without the board and battery. My opinion. May make my McKinley sound better, but I would have to add the 4 to 6 pin adaptor. Or, I could use the adaptor, and run the Ranger. 🤷‍♂️ Good test. No matter what anyone else thinks! 😑🦗

[@TheRadioGarage]

Vids make me lose my my mind 😂, would definitely help on a McKinley in my opinion. Later 💪✌️

[@jasonmiller9495]

I’m pretty sure you have to put the settings in dynamic. Why would Stryker make a microphone that’s electrtet when non of their radios are electret. All of Strykers line up Mic’s are Dynamic. It doesn’t make sense why they would put the Mic out of it can’t be used with a Stryker

[@Ohm10-8]

Waste of money.. even the cheap newer D-104 handheld has a wider range of audio and better sound.

[@TheRadioGarage]

@@Ohm10-8 Don't forget I'm trying to get the sound through my phone mic, which is not like recording on an actual stand alone mic🎙️

[@r.d.1056]

You should run a cable from the external speaker jack of the monitor radio directly into the cameras microphone jack.

[@GroundControl204]

@@TheRadioGarage Line level audio recordings for your content will always give your viewers a better audible description. These mics actually sound way better than a d104, good job on the review brother.🫡

[@dgafkucky]

set it and forget it

[@TheRadioGarage]

There ya go

[@Ron-sac357]

I am not trying to be a smart ass. I try to gather parts and pieces and learn something. your spectrum analyzer was right in front of you. Why didn’t you run it through there? that would’ve really helped us out. and showed us the modulation. but like you said, this is your video😢

[@TheRadioGarage]

Wasn't trying to show modulation

[@Mike-io3ks]

Dynamic. Electret.?/ ceramic ???

[@TheRadioGarage]

Electret