Best Cheap LED 3rd Brake Light for RAM 1500 2500 3500 on Amazon

[@BoostedMotorsports]

Click HERE for the same led 3rd brake light amzn.to/3xcV4xt Click HERE for another smoked LED 3rd brake light we tested kzbin.info/www/bejne/fIS0i5SfbteSndU Click HERE for the LED headlights we tested kzbin.info/www/bejne/qZ2WeGaVgN-Eb9U Click HERE for the LED fog lights kzbin.info/www/bejne/laLOlKywd7KWrZo Click HERE for the LED smoked tail light install kzbin.info/www/bejne/iZq5nmprlth1rtU

[@Octiviono]

this says it has a chrome housing but yours is smoked plastic all around...... wrong link?

[@gahvno]

My 2004 1500 Quad Ram 3rd light still works, but over time it's developed cracks across all of the surface and the one I received is exactly like the one you have with the capacitor - thanks for the explanation on that as I had no idea what it was for.

[@henryg683]

John this truck is getting better every time I see it and I’m growing to really like the blue too and the way it matches the Kota is awesome!!!! Keep up the great content and I’ll see you in the next video!!!!

[@BoostedMotorsports]

Thanks Henry! Me too she’s really coming together 💪

[@masterflow101]

Who doesn't like blue.

[@mikemccallon6957]

I had the same one on mine and after it rained the light stayed on. They send me another one it did the same thing. So just put factory back in and sprayed it with tinted clear.

[@MiguelSanchez-nd4bv]

3rd brake light from Recon on a 2012 ram kept the bed lights on 24/7, added an aftermarket resistor and it got hot AF so I just put the factory back in. moved from the '12 to a '15 and worked perfectly with no resistor. just depends on the voltage supplied. and make sure if you add a resistor that it is not in a place to cause a fire

[@armandoberumen659]

Nice content I see your videos all the time

[@BeenyDanger]

Just bought this and love it. I used the center of the gasket to seal off the inner cab hole the wire runs throu. Worked perfect almost as if it was intended for it.

[@user-cn9on5xn4c]

I can't find a light mod. For my 2021 ram 1500 big horn. Plus I also can't find a gasket for the 3rd brake light. It leaks

[@irishmarine51sfmf76]

I do have a question. I do not want cheap crap for my 18 Ram. How good is this light? The seal, the housing, & how good is the seal to cab?

[@jrusted5.031]

Bro thanks for your work. I decompress watching your content. Keep on keeping on!

[@realzaneo2122]

just installed it and my reverse lights aren’t coming on!! idk what to do

[@hobbyguy79]

Just my humble opinion but stop using the word "cheap" as it makes every mod you do sound cheap and crappy! Budget build, low cost, inexpensive are much better. Appreciate the content and everything you share!

[@drunkenirishmstr]

Any tips on how to prevent moisture in those aftermarket lights? I been getting that but it’s not affecting the light.

[@slsuperiorwash3539]

Where’s the link please ? Thanks

[@RicksRTChallenger]

I have the same one on mine, the cargo lights one day started to stay on, dim but I was pulled over and they let me know my cargos were on, until I turned it on and they were bright.. I may have to mess with it

[@kanaletumlinson]

Hey John the truck has came along way man! It’s been awesome following you while building this beast! What a huge change brother. Thanks for sharing and testing all the upgrades, really helps out when looking for mods for my 16 Laramie. Keep the videos coming!

[@lyrssiper]

Do the classics get the 3rd brake light leak? should i do something pre emptively for that?

[@shiningstaer]

Anyone have issue with these leaking in the cab??

[@loki7974]

So I got this one, and I'm having issues with moisture getting in it. Have you had this issue? If so, how'd you fix it? Love the light nice and bright and helps with ppl running brights behind you. Update: moisture went away one major Pro is these are BRIGHT. To the point that if someone has their brights on behind you just turn these on, and they will turn their brights off and or back off your ass. Definitely a good buy.

[@drunkenirishmstr]

I have the same issue. I think I may have cracked the housing from over tightening the screws, that or the washers for the screws are causing the leak. I had put clear flex seal on the screws to help create a seal. But I still have moisture getting in

[@ihatemonix]

Do you have a link to the actual light you used? The link you posted is to the clear version, not the smoked one you used.

[@nitewolf906]

Looks great. My truck is constantly burning out bulbs. Ordered this to replace it

[@BoostedMotorsports]

Heck yeah 💪

[@estebancarrera6375]

My parking sensors stop working, I got alfaobd and I've been trying to program but I haven't had the best of luck, could you make video on that?

[@tedll75]

That looks great!! I think i will do that!

[@plebetopro5786]

The "tilt" might be the nubbins from the locating pins if you didn't go back with a knife after the side cutters.

[@daddyfixit3918]

i purchased this and it didnt seem to seal at the botom at all, anybody else experience this?

[@2004franko]

Awesome video, and Looks good! I know this isn't cheap, but I'm going with the new, morimoto x3b led third brake light.

[@marcminor7049]

I've actually been looking on Amazon myself for a l.e.d 3rd brake light for my 2007 Ram,even before I this video.

[@raphaelhernandez4088]

Waiting on the sst project anything on that yet!

[@NXT_LVL]

It's better for trailers than bed lighting... though you've already done the under rail bed lights before so there that too. Read alot of them for the Dakota needed that miliamp fuse added to shut the LEDs all the way off, I had to do that with the interior dome lights. I figured thats the only one i'd replace when the time comes being I have a hard shell tonneau and not a flip up like you have.

[@BoostedMotorsports]

Yeah I really like the bed lights on the eco 💪

[@thewhitedemon0761]

Please do the lighting upgrades to the srt10

[@BoostedMotorsports]

We have headlights and led headlight bulb videos for it. Which ones were you looking for

[@thewhitedemon0761]

If I had a dodge it would be for the 2nd to 3rd gen but the tails and 3rd brake lights

[@Rayzaa101]

Id have put the gasket on the light in case you want to put on another and dont have to scrape that one off lol. I think it looks good but im not a fan of using smoked lights , but not because of looks. I just dont want to diminish the light brighness purpose, especially on headlights. Just my feeling on it.

[@JoseCastro-yk3sm]

Does anyone know if you can delete the Active grill stuff with the Alfa OBD programmer?? HELLLPPPP

[@reaver357]

Nope you can’t. Just yank the grill out, pull the flaps out and put back in. 10mins of time. If your grill is trashed or the shutter frame is missing, you’ll need to add resistance to the shutter servo. Plenty of YT vids on how.

[@rkiel5082]

Will it work on 2022 ram classic

[@BoostedMotorsports]

Yessir 👍

[@cocoastclair]

Looks good I did the same and I like the led way better.

[@BoostedMotorsports]

Me too! 💪

[@JayBo41510]

I like it and I just ordered mines

[@clintmorris2760]

Where can I get one

[@BoostedMotorsports]

Link is in the description 💪

[@johnsn10]

Do you spend any time in your house or just live in the shop?

[@BoostedMotorsports]

Haha it’s a fine balance 😂

[@tgtshirts1]

It looks really good Thumbs UP!

[@BoostedMotorsports]

Thanks man 👍

[@alanblackaby2998]

Have you tried to leak test it to see if the old drain issue comes back with the aftermarket install?

[@McChuckD]

Cleans the back up nice. 👌🏽 When I click the link for Amazon it says it will not fit the 2020 Classic. I get this often and it deters me from certain products even tho I’m pretty sure on some. Maybe you could mention that for other new RAM Classic owners. 🤘🏼🔧💯

[@BoostedMotorsports]

Thanks man! Yeah I never trust the amazon vehicle fit it’s always off lol

[@JayJeep1500]

Looks good. Going to give it a shot.

[@BoostedMotorsports]

Thanks Jay!

[@likaybai]

It's a resistor(dummy load)...not capacitor.

[@TravicomTulsa]

Hey did you know some fans or members are Amazon Associates, or holding other positions in Tulsa OKLAHOMA USA. Yes Sir at TUL2, or the other location here in Tulsa just east of Tulsa International Airport. Oh yeah I also work for 2 other companies part time. Always working.... Never ever not working....almost never broke....LMAO until I went to fill up with gas. Oh nice um badass video expert professional man.

[@325spoon]

Not a fan, I think there’s too much red in your taillights. I know they’re smoked but they’re not black out like the 3rd

[@stevewright2991]

Thank you

[@mikemcdaniel2570]

I like it

[@johnsmith-qz4bv]

looks awesome..

[@johnsmith7345]

yeah bro

[@sulnday]

Wish they had this for 5th Gen man😕

[@BoostedMotorsports]

Yeah takes awhile for aftermarket to make stuff readily available! Will be soon hopefully

[@sparkman6713]

Looks good ! 🤟🏻🔥👍🏻

[@BoostedMotorsports]

Thanks Steve!

[@MM_in_Havasu]

Looks badass, John! Looks like a bunch of gorilla snot on the old one......argh! What a PITA. New light came out great though. Thanks man!

[@BoostedMotorsports]

Thanks mark! 💪

[@Devilspocket2002]

we all know you mean resistor and not capacitor lol

[@daddyfixit3918]

This collected water after only a couple months.. very disappointed

[@willmatic84]

Looks really good 👍 John little mods makes huge difference #BSTEDMTRSPRTS

[@BoostedMotorsports]

Thanks will! 🤘