Best DA Machine polishers for Intermediates or Beginners? | DA15 and DA12 In2detailing

[@philip_james]

I thought he farted @ 19:00 😁

[@kevinjames7012]

It was the seat 🤣🤣

[@philip_james]

@@kevinjames7012 I know but it's funny he says 'Ooop' when it happens as if it was a fart 😁

[@macdesigner]

And again at 19:05 ... Beans on Toast for breakfast maybe?

[@detailbyvitorferreira6714]

Greetings from Portugal! Let me tell you a little secret! I am professional and I use them as primary and secondary machines! And, to be honest, they do the job! Just like you said, don't have the "finesse" like Rupes or Flex, but you can get the same results with a fraction of the price. If brakes down, buy another one. My machines were imported from in2detailing and they where very helpful. They actually send me some sweets with the order, which is a nice touch! Excelente review, again, and my invitation to visit my garage in Portugal is still on! Well done! Vitor Ferreira

[@markconnolly802]

Just ordered the DA12. Jon costs me a fortune. He's so compelling with his brilliant reviews, full of relevant information and delivered with humour and personality. Don't ever stop doing what you do Jon.

[@farky350]

Alway easy to understand this guy is where everyone should start when starting up detailing.

[@davidjob6881]

I bought an In2detail as a backup for my Rupes 5 inch. However, I've find myself using the in2deail machine rather than the Rupes. I didn't mean to it just happened. You can use ear protection to ameliorate the noise and anti vibration gloves to protect your hands from vibration White fingers. Love and peace x

[@liverpoolscottish6430]

Great video Jon! I've always applied wax polish by hand, and buffed it by hand. I'm going to buy a DA very shortly, and I've learnt so much from your videos- brilliant stuff, keep up the good work!

[@ForensicDetailing]

thank you mate really appreciate it, I do this because of guys like you with positive vibes.

[@davidwood1838]

I just got my self a spta mini polisher and a autocare polisher. For the amount of time I'm gonna use them they are great.

[@callum1995ful]

Did you buy the 1 or the 3 inch SPTA please? Been looking at both, and seem great value.

[@hypnoticmonkee]

I've watched a lot of John's videos. This is one of the best I've seen on this subject. Very very good content for my interest. Well done bud

[@JonnyS281]

Got my order for a DA12 in on Friday when the new stock landed and it arrived today! Going to be an excellent companion to my DAS6 Pro+

[@rorymurphy8275]

Great video as always John. Machine polishing is the next step for me. Pretty happy with my cleaning process but a little nervous about hitting the car with the DA. This helped ease the nerves

[@maverick4177]

Just got myself a Das 6 V2, seems decent quality for its price, and seems as good as the meguiars one i had

[@Jahmed5635]

Fantastic video mate, as a beginner myself this was really helpful mate 🙏 lovely stuff

[@geoff2109]

Just got my DA12 today. checked u tube and you done a review cool

[@markmoore6264]

Another useful video Jon , I've been looking at the forced rotation myself especially after watching your review of the In2detailing one a while ago.

[@jdisdetermined]

16:14 For some reason I've been watching and laughing about that pen yeet for literally like 5 minutes. The expression, the pose, the clattering sound. It's just all there man. Awesome video, thanks! I am super jealous of your cordless polisher lineup. Please test the new cordless ShineMates and then do one of your famous deep dive comparison videos of all cordless. You for sure have more cordless DA experience than any other channel! 👍👌✌

[@tonyosullivan2382]

Great vid again Jon,really enjoyed it. I can not wait for you to get stuck into that car and get that paint lookin mint. 👍

[@owensteele1274]

Got the DA12 Mini on order from Imran's place. It looks a right little belter. Thank you for another fantastic video Jon.

[@marcdg5684]

Thank you John for sharing your experiences with us, great videos !

[@willdobson3672]

I do love john's videos but this felt way too rushed and I much prefer the edited format instead of the one shoot and done vibes. Still good video though thanks for the info! Came too late for me, I have just purchased the carbon collective 15mm throw DA :D

[@paultaylor9652]

Lovely Jubbly, interesting you can always learn something from Jon.

[@TucaLoni]

I love your channel man! thanks for doing what you do. you have helped me in so many ways to prepare for my business its crazy!

[@owensteele1274]

Am I the only one who thinks black BMW's have really soft paint than other-colour BMW's? I done plenty of Sapphire Black examples since Chrismas and they correct so quickly and easily and look really sharp, like your Diamond Black E36.

[@nmclive469]

Great vid years ago i bought a metabo sxe400 sander with 80mm backing pad and variable speed as a dedicated small pad polisher to go alongside my das 6 pro, as at the time there wasnt any dedicated small polishers and has served me well, looking at getting a spta micro polisher next or the liquid elements a1000 not sure which yet

[@Dkcode]

Placed an order for one of these to compliment a set of rotary polishers.

[@ptheledge5390]

I have the Maxshine 15mm Da and looking for a smaller one too, very tempted to get this DA12 one

[@seabrew1]

love my griots first gen. 15mm 5inch and 3 inch mini polisher, G8.

[@gtails7584]

Another great video John 👌🏻

[@Slugworth88]

All You're reviews are absolutely awesome! Just cover all the angles super details digestible content even for novices! Really fantastic thanks a lot

[@richardbowe2634]

Hi just bought da forced rotation think it's brill got the da15 as well but can use forced on 99% of car and also got 10% of with your code thank you

[@lewiskennedy5152]

Really enjoying your channel!! Appreciate your work! And the way you explain things :)

[@jcvdvandd]

Not sure if you have tried the Rupes Yellow wool pad, but its awesome in my opinion.

[@p8rdm]

I’ve just purchased the SPTA cordless polisher thought I’d give it a go, will probably only polish my car couple times a year so might be ok, if anything it’s something to learn on 🤞🏻

[@seabrew1]

i'd say it will be a blast! I love machine polishing.

[@karolisrum6573]

I got SPTA 3 inch DA. Also does a good job for the price

[@andrewsmith7636]

Hi mate iv just ordered a Mikita DPO600 polisher, thought i would try it as i use these battery’s at work, well done mate 👍

[@rb8946]

Another great Video Jon! So tempted by these but also tempted by the Rupes! I know which one I should buy as I've only got my car to polish and little experience... doesn't stop me wanting the other though :p

[@ForensicDetailing]

if you have the money I dont think you will regret buying rupes, you get used to the feel of them and they feel good. But if your on a budget these are great.

[@davidcassidy2731]

More or less my set up 15mm throw das 6 pro 5" pads and a 3" mini DA with 8mm throw, I want to get an additional nano polisher for round handles and quick spot treatments but want to keep it sub £200.

[@Mariuskartin]

Thanks for the video Jon. 👍

[@Ludo_A]

Hi Jon, what happens/can go wrong when you swap the plate to 75mm and do not swap counter weight? I did not know this and had no probs with it?

[@raymondo007]

Nice one John, Another great video. Thanks.

[@JDDetailing]

Good stuff Jon loving the videos. How do you think they fair against the more popular brands?

[@davidflanagan9924]

Great video Jon, really helpful. Just waiting for the warmer weather to come! 2024 😂

[@owensteele1274]

15:47 to 16:20 That reminds me, HubNut just uploaded a video where his misses tidies his 'garage' LOL!!!

[@ianjohnson2866]

Another great video Jon 👍🏻. What make is your wheelie seat and where can I get one? Cheers

[@chrismorris8662]

I'm a weekend warrior john , am looking to purchase the mini as a second to my rotary, could you do a whole car with the mini as I do feel more comfortable with 4" pads

[@brad2807]

I don’t no why you hype in2detailing so much Jon , I’ve been watching all your videos for absolutely years now but had never ordered anything off this imran which I did last week to find I had something missing out the kit I ordered and upon emailing them I had a reply from I ran who was like trying to get blood out of a stone to get him to send out to me what he’d missed off my order this company is an absolute shambles I won’t be ordering from them again

[@brandonhood8784]

In2detailing is local to myself and I can say I've never had a problem with any order. Quite a helpful guy whenever I've went in to collect. Not 100% sure but I do believe he runs majority of it himself. If you have issues with orders best off calling him seems to be a very busy guy!

[@1977JohnBoy]

ebay is good for tools especially when they do 20% off or so which they do regularly, places like ffx on there already do over 20% off plus earn lot of nectar points to save even more

[@thegolfdiaries1123]

Great vid as always

[@jonandlisa2000]

Great content, very useful info 👍

[@oliverbrookwell]

Great Vid very useful things to know! What compound were you using on this one was it the middle grade one? And what sort of paintwork would warrant using the deepest cut compound? My cars a 04 and has quite bad swirls and marks on one side! Am I right in thinking I can do all the cutting with the purple pad, and polish with the yellow?

[@ForensicDetailing]

I used F6 (f5) in this video. any paintwork you can use high cut really.. but on soft you will find its so easy to remove scratches a mid range product can be the best bet.

[@CAM-sf9kx]

Great Informative video as usual Jon. Not sure if you know but the tile says DA15 and DA15 🤔

[@alexr129]

Great review many thanks

[@daveversion2.2]

I have a curious question…..I bought a Shurhold DA ~8 yrs back and they are still sold on Amazon. I never hear mention or review of that brand. Comments? Thx

[@petrimuinonen3462]

Little confused here. He says these dual action polishers do not work if one tries to tilt them, yet he does tilt the machine on top of the panel near the side window and it works just fine?

[@peterlock9264]

Jon, do you still recommend using flex orange and purple pads and Koch chem abrasives, because on other vids I have seen of yours you recommend a different make of pad. Peter

[@ForensicDetailing]

yes mate.

[@1ABY]

Hi, mate watched your videos for many years and learned a lot, What's vibration like on these DA polishers, I find when I use da polishers I get left with tingling feeling because of vibration, That's why I prefer to use rotory polishers at lower speeds and a lot smoother

[@ForensicDetailing]

more vibration than the premium tools. one of your comparmiases for a cheaper tool from china is noise and vibration. for most theres not much in it but if your sensitive to this and its a problem I think rupes or flex will be the way forward.

[@1ABY]

@@ForensicDetailing Thankyou for your reply shame them polishers are so expensive

[@littlelegs6532]

Which is the the better machine the Das6 pro v2 15 or the in2detailing 15m

[@no_lft_shft]

I need a good 3 inch DA. I have a 5 inch and a decent 1-3 inch rotary but I need a good 3 inch DA.

[@mange2]

I need to polish a huge high top XLWB van. would it be better to use the DA15 because of the larger areas, or would it not make much difference with a DA8 ?

[@ForensicDetailing]

Its the plate size so use a 6 inch plate will help mate.

[@TruckerMatty93]

Have you thought about getting some of those garage tiles so you're not walking on cold concrete?

[@MYNYDD-MOTO]

Are they expensive ? Currently in the middle of renovating my garage / kitting out, and looking around for good floor solution

[@TruckerMatty93]

@@MYNYDD-MOTO I don't know how much they are to be honest but there's quite a few styles around

[@joshuamajmari4957]

Would you recommend these over the das6-pro?

[@Justin-ny6un]

Ended up here after watching both your pad videos again. In the comments you mentioned to check this video for the Flex Pads vs Scholl. Im looking for more of the 3 inch Scholl NEO Honey pads but can’t find them. Is the Flex Orange more similar to the Scholl Orange or the Honey Foam? I’m guessing as the purple seems to be the same then it’ll be the same as the orange. Scholl don’t answer emails in regards to whether the 3 inch honey pads were discontinued.

[@ForensicDetailing]

I dont know for sure but I don't think they are the same. The purples are the same. I don't want the cuts though

[@Justin-ny6un]

@@ForensicDetailing How do the Flex Orange feel hardness wise in comparison to Scholl Orange or Honey. The Scholl Orange feels softer than Honey to me and I prefer the Honey. So the Flex Orange would be ideal if they are like the Honey firmness. The Honey 3 inch which I have don’t have the cuts, can’t think why’d they’d be discontinued though (if they are). As there’s now no alternative in the line up. So it annoyingly breaks the “system”. I got them around 2016 and haven’t been detailing since then. Just got back into it. They don’t make the 1-2inch pads either in this foam just the navy/purple/orange, weird. Thanks for all the great content anyway been watching everything from the last 4 years over the last few months 👍

[@christopher4636]

Hey Jon, I was planning on ordering a Das6 Pro Plus v2 following your previous recommendation, would you recommend the DA15 over that? That would be my first machine polisher for removing haze/swirls from my bonnet.

[@christopher4636]

Scratch that, I've decided to go down to the DA8 following your reply to other comments. Keep up the good videos.

[@OraEtLabora0]

33:24 why don't you swap them instead? GoPro on tripod, DSLR for close ups/details. perhaps try copy Jimbo from WhiteDetails...

[@speakthetruth9520]

Good evening sir . I know this is a couple of years old but what would you recommend now for two polishers and cutting and polish . Please

[@ForensicDetailing]

if on a budget these, if not rupes mate. polish either koch or scholl concepts

[@speakthetruth9520]

@@ForensicDetailing much appreciated thank you

[@peterlock9264]

John, looking for my first da polisher. What do you think of the spec on the new 1000 w poor boys da compared to in2 detailing 900w d8, have you a preference. Peter

[@ForensicDetailing]

Not used the poorbpyz sorry m8

[@no_handle_required]

Is that made by the same people that make maxshine do you think?

[@ForensicDetailing]

its not made by maxshine, it comes from another manufacturer out in china though.

[@johnlanore599]

Im learning right now workin on boats. I was wondering if its good practice to cut with a 15mm or 21mm and polish with a lower mm machine like a 9 or 12mm to have a better finish, less marring? I was just wondering if that is the case? Thanks.. Also, whats the best polisher youve ever used? Top 3

[@ForensicDetailing]

theres lots of factors mate Ive never polished a boat but Im guessing if your getting marring its a really soft gel coat finish, so a less agress machine and polish might be the way to go.

[@johnlanore599]

@@ForensicDetailing I meant on vehicles, Im just starting to use a polsher and working on boats. I want to do my blk gmc sierra this summer and was wondering if that applied to clearcoat bigger mm to cut lower mm to finish? Thanks for replying.

[@tony.775]

Flex & Rupes spend millions on R&D. That os why they are Brand Leaders and why their products are so good John. You only ever get what you pay for. That is simply the only choice to be made.

[@ForensicDetailing]

they do but the compramise is 95% of the market cant afford their tools and that business is lost. Its good for us as consumers because we have cheap and premium offerings and choice. but if I was rupes or flex my greedy eyes would be looking at the massive chunk of the growing consumer marketting that is being missed.

[@jezeesanderz4420]

Hi, I know this is an old video and wondering what the best machine is for removing both fine and deep scratches from the paintwork. Also what paste would you recommend for removing deep scratches from a side window. Thanks

[@ForensicDetailing]

you wont remove deep scratches from glass mate. Any DA will generally be fine mate it just depends on budget, you go rupes and flex if you have more money or these if your on a budget.

[@jezeesanderz4420]

@@ForensicDetailing thanks for the advice, much appreciated

[@PhasesOfIronCarbon]

What do they categorise Audi's quantum grey paint as? Hard or soft?

[@anthonyg9620]

How come you don't use any Griots Garage products or polishers? They have some of the best if not the best detailing products out there.

[@ForensicDetailing]

Not widely used in the UK, lack of availability of bulk.. and importing USA brands adds cost. Have used a few griots stuff on the channel. Their best of show sprays are really good

[@marioskosmidhs9454]

Dear John sir, have you used or tested the Koch chemie FW as dexawer/paint prep?

[@ForensicDetailing]

no mate sorry.

[@alboo7637]

I am looking for a new cordless polisher have you tested the new milwaukee DA units as I already have milwaukee tools with the same batteries. Or do you only recommend the flex units

[@ForensicDetailing]

If u just want one da go with the Milwaukee.

[@alboo7637]

Thank you my original in2detailing corded machine was awsome for the last few years as per your recommendation but now I have moved and running extensions is a pain thank you still for all the great vids and testing

[@Jazzyjay-eu6ow]

If I bought the DA8 using the 5” pad and then swapped to the 3”” pad supplied but didn’t change the counterweight would this be ok or cause problems?

[@ForensicDetailing]

Yer it's ok, just a bit more vibration

[@callum1995ful]

For someone who’s starting off which size polishers would you recommend, not in terms of brand but sizing please? Would you opt for a 5 and 1 inch or 5 & 3 etc

[@ForensicDetailing]

this is a great question its hard to answer because budget plays a role some guys will buy "the lot" and the best even when they start but here it goes a) 95% of people should just buy a normal DA like the DA8. this supports 5 inch and 3 inch plate job done. polish the car once a year swap plate as required or just make do with 5 inch plate. (normal people :) ) b) if polishing 1 car a month or more get a DA15 and DA12 (3inch mini). It will just make polishing bumpers and pilers easier etc. c) If you get the full on detailing bug and lot it and want to go elite mode add a nano polish to the arsenal. PXE80 or Rupes nano or carbon collective one etc... I love the combo of XCE cordless and PXE cordless. The PXE cordless supports 3 inch and 1 inch so you get the full range with 2 machines.. but yes the PXE lacks a lot of grunt compared to a proper 3 inch polishing like the DA12. hope this helps theres no right or wrong just options and budget etc...

[@callum1995ful]

@@ForensicDetailing thank you so much for taking the time to respond, and in great detail which is exactly what I was after. I currently run an Auto Finesse 5 inch polisher, and the detailing bug has hit massively however can’t commit to a Rupes for now so have been looking at adding a 3 inch to the group for trims/intricate areas a 5 inch can’t reach. Been looking at the in2detailing, shinemaster, SPTA among others then torn as the Rupes 3 inch is not far off that price wise, an additional £100. Lots to think about. Thank you again.

[@gage010577]

Same uniit with maxshine from Amazn . N clover on aliexpress

[@ForensicDetailing]

incorrect. once again people talking about things they dont understand about and getting it wrong and spreading misinformation. this is not made by maxshine and its not the same as the N clover machine. And of course you wont apologise for being wrong. Its no secret its made by someone out in china though, but at the moment In2detailing are the only people selling this polisher in the UK. (Im sure someone else will offer it at some point though)

[@gage010577]

@@ForensicDetailing i'm sorry if i'm wrong :-) but the spec is pretty similar with ms 15 pro mk2 (diff shroud actually) and clvr da 15 mk3 maybe the clone .. just diff rubber color

[@sthochglanz]

Dear John: Aren´t these pads you used made by SCHOLL in Germany? We know Scholl produces a lot of things white-labeled for other parties. When we saw you introducing the pads we immediately thought these are the Scholl pads?... Thank you, Sarah & Timo

[@ForensicDetailing]

no idea. but remember even pad manufacturers dont make foam. theres about 6 main players when it comes to foam production. what I can say is the flex foam and scholl foam seems the same. But this is the same for all pads really. the main foam manufacturers are big players and dont offer exclusivity.

[@sthochglanz]

@@ForensicDetailing All right! Thank you for that John! 👍🏼

[@tripitaka1]

i know this sound silly but can i ask which machine should i get the wife car is a golf 1.6 fsi blue 2007 ive never used one before and only have max £200 to spend i know car bad it has key marks around handle so will need to get a small buffing add on to go round in handles ill only be doing her car and will do 1 to 2 times a year and what polish ive seen in2Detailing DA8 Dual Action Machine Polisher **The One Stepper** i had email in store then within 5hrs all sold!!! please any help be great!

[@ForensicDetailing]

hey there I think its chaos at the moment trying to maintain stock with covid and the worldwide effect on shipping. The DA8 is the best starter polisher really for your requirements. The only thing is is you wont be swapping the plate around much. so you could just get the da15 instead and then if you really get the detailing bug you can get the DA12 later. the DA15 has better grip and trigger and is nicer to hold and will cut a bit faster as well. But if you are sure you want an 8mil DA like the DA8 you can get the DAS6 pro fro clean your car if you dont want to wait for DA8 restock. You should check out my Detailing Fundamentals training course with discount code applied it will help you get started with all this. ioa.pxf.io/c/2687409/1012495/12764

[@darr3nm]

Would the In2detailing DA8 be a good polisher to buy comes with both 125mm and 75mm backing plates?

[@ForensicDetailing]

yes mate. if you want one polisher and dont mind swapping plates. its the best starting point

[@richardm2661]

Good timing for me

[@no_handle_required]

What is your recommendation on pads to use, brand names etc.?

[@MYNYDD-MOTO]

I think he uses FLEX pads, pretty sure he’s mentioned them in a few diff vids, flex violet and flex orange

[@no_handle_required]

@@MYNYDD-MOTO thank you

[@TheAgeRating]

Sorry me again the da 8 is out of stock :( thinking about getting the 15 instead okay for a first polisher ?

[@ForensicDetailing]

yer its fine but you cant put a small plate on it. but get the DA15 and if you want later on you can get the da12 (3 inch mini) to team up with it. Most that start with the DA8 onbly use 5 inch pads anyway as it gets expensive buying like 3 inch pads as well. go for it.

[@senditfpv6538]

Been looking for awhile now. Never got stock

[@chrisnorman3527]

Does anyone happen to know the sizes of the flex polishing pads that Jon used for the da12 and da15... I've just purchased both upon watching this video.

[@ForensicDetailing]

www.flex-tools.com/en/products/l/accessories-2/accessories-for-polishers-2/

[@callum1995ful]

Brilliant in-depth video, thank you. in2detailing polishers seem really good quality. What else would you recommend around the same price in the detailing market please? SPTA or Carbon Collective? The mini in2detailing polisher you reviewed I’ve been looking at but a little concerned on the 600w motor.

[@ForensicDetailing]

Ive not tried SPTA or the CC one. This one is different to the SPTA or maxshine one and its unique at the moment to in2detailing. the 600w is perfect rememeber its a 3 inch pad so it doesnt need the 1000 w moter the pad foot print is much smaller so there is less load and friction etc...

[@callum1995ful]

@@ForensicDetailing thank you for the reply. Your advice and guidance is greatly appreciated. Loved your video on the Kingsman and the various polishing pads( including SPTA and in2detailing). Your latest video on payed promotions was interesting too ... and fair play to you if you want to do this. I’ll support you and your channel regardless as the content is truly fantastic

[@PixelVogue]

Need an ibrid style one now

[@jeyomcnugget9584]

Have you seen the 1+2 inch offering from carbon collective? It’s catching my attention

[@ForensicDetailing]

yer I like the price Im sure its ok for the money. maybe we can review it.

[@jeyomcnugget9584]

@@ForensicDetailing something I’d love to see!

[@gizmo6164]

.......... is ‘touching wood’ part of CE certification? 🪵🤔

[@PixelVogue]

I would have just pulled the trims off, only held in by small bung thingies lol

[@davidhammond3738]

I’m desperate to enter into the machine polishing arena, but I need to find a unit / garage I can rent or use for the day. My single garage is just not big enough!

[@ptheledge5390]

Get a detailing gazebo

[@davidhammond3738]

@@ptheledge5390 ooooo.... that’s an idea..... well played, sir!

[@ptheledge5390]

@@davidhammond3738 have one myself with side walls too. Have a look on Rockawnings. Plenty of sizes to choose from 👍🏼

[@davidhammond3738]

@@ptheledge5390 Thankyou very much indeed. That’s a great help. 👍

[@philiprush5754]

That's not a bad result but you need to calm down and try not to rush it as much

[@Ronke01]

Hands down Liquid Elements machines imo

[@michaelnaughton1393]

The fumes off that product seem to have got hold of him in this one, or he's still enjoying the Christmas drinks cabinet

[@EazyDuz18]

what u banging on about

[@owensteele1274]

It's a funny, unedited video. The 'Crotch Kemmy' polish products are clean and odourless so should not be fumey. But yeah, Mister Forensics is on top funny form in this one.

[@Ragnarrok2023]

Liked this video before I even watched it hahah

[@augiugs]

I can't seem to find a da8 3 inch counterweight on in2detailing. Could You provide a link?

[@andyhopkinson2708]

Would be interested to know myself

[@MrASM1992]

@10:49 don’t EVER do that again John 😂

[@owensteele1274]

Big LOLZ!!!

[@simonb6306]

Title has da15 in twice John ;)

[@ForensicDetailing]

lol thanks Simon.

[@japfan8161]

Same as a das6 pro plus v2

[@ForensicDetailing]

no its not.

[@1stfrompuertorico568]

4th from Puerto Rico 👍🇵🇷

[@owensteele1274]

Great tip on rubbing my bottles' nipples against my cutting pads. It saves wasting expensive product as well.

[@Detailguy101]

Auto detailing is the biggest fuckinh headache ever!!!! I did it for 15 years! If i had to do it again i would slice my fuckin throat!