Thank you, just picked up a Wave 3 and this helped me set up the EQ and understand it intuitively, as my wife laughed as I adjusted it.
@StreamGearTalkАй бұрын
Congrats on the new mic!
@Bogdan-gi9yx20 күн бұрын
Hey, did you get to some good settings for it? I just picked up my Wave 3 and can’t find the sweet spot with the settings for me. If you did, do you mind sharing your settings?
@TyNeyedly20 күн бұрын
@@Bogdan-gi9yx Everyone is going to have different settings. Its best to play around with it and find what you like.
@Bogdan-gi9yx19 күн бұрын
@@TyNeyedly Okk, thank you!
@Levi-cl6wf10 сағат бұрын
can you release the preset for the SM7b ? cuz its hard to copy the settings
@StreamGearTalk9 сағат бұрын
Let's see if this works. drive.google.com/drive/folders/1Jb_eDtoHcWjuSGnw8zwXlzSSlf2Y-nBN
@nathjon_Ай бұрын
Great video! Is there any reason you chose the elgato noise removal over the nvidia noise removal? Just wondering.
@Eldon.308Ай бұрын
Can you please do a step by step like that on the new xlr dock for the stream deck plus
@hiimmulle991029 күн бұрын
How do you listen to your mic with the eq thats effects
@HashiraOribaАй бұрын
Ahhhh i caught that Kingdom Hearts reference when you were talking about compression 😭🫶🏼
@ayebrian2 ай бұрын
Oh this is super perfect! I may have to switch back to wave xlr from rodecaster duo (debating).
@christianjunetubera66513 күн бұрын
Hi, would there be any difference regarding the arrangements of the effects? should the compressor comes first before the EQ?
@StreamGearTalk13 күн бұрын
I've always wondered this myself and I've tried different "load orders" and have found no difference. I could be wrong but no difference heard at all
@christianjunetubera66513 күн бұрын
@@StreamGearTalk ok thank you for your input...
@rickycano359620 күн бұрын
I cant open that gain tab 🥲 i only get the choice to switch audio inputs
@FusionThunder2 ай бұрын
Can you do this for steelseries sonar as well?
@DemiseTLG10 күн бұрын
From my understanding, you cannot use any microphone as you pleas. You still need a compatible Elgato device to run the software. My brother tried using wave link for his Yeti mic. It only works for him when I plug in my Wave 1 into his PC, which he can then add the yeti as an input. However, the moment I disconnect my Wave 1 from his PC, he can no longer use Wave Link.
@StreamGearTalk10 күн бұрын
This is correct. In order to use wavelink, you must have 1 of 4 wavelink devices. Without 1 of those, no wavelink
@DemiseTLG10 күн бұрын
@@StreamGearTalkThat is unfortunate. He just loves the functionality of Wave Link. Only viable option for him to use is the stream deck but even then he’d only be buying just for the sake of using his mic.
@StreamGearTalk10 күн бұрын
I believe I mentioned in the video the 4 devices that enable use of wavelink, at which point you can use any mic to take advantage of it. In this case I'd recommend the stream deck plus.
@WilCin2 ай бұрын
best wavelink tutorial, Thanks it helped me a lot
@StreamGearTalk2 ай бұрын
Thank you!!
@danielvonankhАй бұрын
The elgato noise suppressor also cut out off the voice of me when I set it to 1%. However I think it automatically adjusts after you talk for a while and won't do it anymore.
@Vantavimeow13 күн бұрын
Your interface is popping and clicking frequently, you might want to check and adjust your buffer size
@flopinflo502 ай бұрын
I have a wave 3 i just dont know what settings would make my voice sound clear or not, I'm just having lots of trouble on deciding what is good for my mic.
@KhiTV16 күн бұрын
I’ve been experiencing my mic cutting out for a split second or some crackling and just slight noises that shouldn’t be in my audio during videos. Thought it was wave link/my mic effects but it does it with them on and off. I tried using a different usb cable and that wasn’t it either. Even used a different mic and I’m still having the same problem. Do you know how I can fix this and just have clean, crispy, audio 🤦🏽♂️
@MrTisuGaming11 күн бұрын
Even this Video has it like a lot - I couldn't watch it to the end because it triggered me so much ;_;
@Jesterttv28 күн бұрын
Why do you use a Cloudlifter when the Wave XLR delivers enough power/gain itself? The SM7B needs around 60 dB, and the Wave XLR provides up to 70 dB. Using a Cloudlifter in this setup only reduces the audio quality and introduces unnecessary noise.
@kevinmichaellopez26 күн бұрын
I was about to comment this too. I’m planning on getting a wave XLR interface and wanted to confirm this
@Jesterttv26 күн бұрын
@@kevinmichaellopez Get it, works like a charm.
@StreamGearTalk26 күн бұрын
kzbin.info3W_aeNHe7w4?feature=share I agree the cloud lifter is not necessary. I've had this stance for a long time. I disagree, the cloud lifter does not reduce audio quality, it sounds just fine to me. I agree it does sound better without when using vsts/ noise suppression.
@Jesterttv26 күн бұрын
@@StreamGearTalk For the normal consumer, you probably won't hear any difference at all, but if you check how the audio waveforms change, you can see a huge difference. Noise suppression also reduces quality, not as drastically, but it still has an impact. I’ve seen this firsthand through my previous work with Elgato and Shure, as well as from testing with the audio team at Shure. This is where I base my opinion on, alongside my own testing and the insights gained from working with the Shure audio team.
@StreamGearTalk26 күн бұрын
@@Jesterttv for Shure, pun intended. My content is aimed at the normal consumer. Of course if you're talking now the not so average consumer/creator then that's a different conversation! Average person doesn't have the ears that you probably do plus the added audio from games etc masks sole of the noise.
@spencerstmars4882Ай бұрын
btw...you have a lot of random static throughout your video. I'm using the Sennheiser HD560S and the Topping DX7+ and can hear it quite clearly
@kevinmichaellopez26 күн бұрын
I heard it too on my iPhone
@spencerstmars488226 күн бұрын
@@kevinmichaellopez ok so it's a recording issue
@MDTechTips2 ай бұрын
Question, I set up my Shure SM7b with the new XLR dock this past week and I keep getting this static pop sound. I can't seem to figure it out to save my life and with the rodecaster I used previously I never had an issue. Any ideas?
@StreamGearTalk2 ай бұрын
Double check all connections. Gain too high? Try different USB port. Some ideas. Let me know if any worked
@tls.coachingАй бұрын
any idea why my mic is "ECHOI" is it because im talking to monitor ale sound is bouncing of it? i have elgato wave 3 and its 45 degrees on the right of my face 30-40cm away and in front of my is monitor and behing it is wooden acoustic panel. what could be wrong?
@AleksTufte2 ай бұрын
Hey this is a great video but when I use the elgato noise removal I don't have the slider options for threshold or release. I've updated to the latest version.
@StreamGearTalk2 ай бұрын
Are you using Elgato's noise removal or the nvidia one that's also in the elfato marketplace?
@AleksTufte2 ай бұрын
@@StreamGearTalk Elgato Noise Removal. The only difference I have is that I'm using the wave 1 Microphone instead of the Wave XLR
@Zakarith24 күн бұрын
@@AleksTufte @StreamGearTalk I also see the same thing as you, but I am using a Wave XLR. The Elgato noise cancellation has no settings beyond on/off. They should have those settings those based on the changelog for the plugin earlier this year. So we are both experiencing some bug with the software where we cannot see the settings.
@Eldon.308Ай бұрын
Hey brother i have a quick ? i have the shure mv7 plus and im using the usb side of things into wave link cause i have a streamdeck plus.but i was wondering if i should download the shure motiv app to set up my mic and the use that on the wave link or forget about the motiv app and just do everything on the wavelink
@StreamGearTalkАй бұрын
It's honestly a matter of preference. Motic does some nice things but I prefer less apps in use. I'd say try it out both ways and see what you like! And let me know what you go with
@Starrky923Ай бұрын
13:46 why did you expose Thor's preset
@michaelmarcano92002 ай бұрын
If you can do this for those of us who don't have elgato products that would be greatly appreciated!
@StreamGearTalk2 ай бұрын
Sure thing I can try. What do you use for your mic audio?
@michaelmarcano92002 ай бұрын
@@StreamGearTalk I have an MV7 as my back up but I have as my main mic I recently got an SM7B and a vocaster Duo interface. THank you!
@StreamGearTalk2 ай бұрын
If you use obs I made this one like two months ago kzbin.info/www/bejne/goWcdZmKobKUh8ksi=JlRynplD8PcUyn9D
@DLothecollectorАй бұрын
Great video, it just stinks when I get into parts of these types of videos were its Pc only software. Is there any hope for Mac users? I feel like I can never find one.
@Eliotr-f1d2 ай бұрын
how do you pass the software installation, when it says connect you elgato microphone? you didn't show that , can you show all the way you installing a different microphone full installation? i am stucked on connect compatible device?!? why didn't you show that and jump straight away to where things working?
@StreamGearTalk2 ай бұрын
I appreciate your comment. What wave compatible device, of which I named quite a few, do you own?
@PigTownSports2 ай бұрын
nice vid man. good job
@StreamGearTalk2 ай бұрын
Thank you!!!
@ryan24732 ай бұрын
The presets button does not appear for me any solution?
@StreamGearTalk2 ай бұрын
For EQ? You need save your EQ and it should show up after that
@Datkidjayy2 ай бұрын
Great Video nice work.
@StreamGearTalk2 ай бұрын
Thank you!!
@HANIDI2 ай бұрын
do the settings save to the device you are using with wave link? i have my mic connected to wave xlr and configured. but i then connect my wave xlr to my ps5 and i have no idea if the settings carry over
@StreamGearTalk2 ай бұрын
Ok that's an excellent question. Here's what I know. The settings do save to the XLR but I don't know if it carries over to a console. In theory it should. Easy way to test this is to use the noise removal plug in. If it's on and working when connected to PC, then connect to ps5 and you hear all your noise etc then it doesn't transfer. I can test this when I get home.
@HANIDI2 ай бұрын
@@StreamGearTalk thanks for your response, that would be great! i will try it out too later. check all over for any advice on this but i have not come across anything that helps.
@StreamGearTalk2 ай бұрын
One device I think should do this is the rode podmic USB. When used via USB you can save all processing to the mic. Now, what I have seen though is that the saved settings don't always work as well on console. There's something odd about how the PS5 communicates with a dsp device.
@HANIDI2 ай бұрын
@@StreamGearTalk funny enough, the mic im using is the maono pd400x which also saves settings via usb but i find it very quiet on the ps5 and when i turn it up theres a lot of background noise. the software is nice but im not sure how well the noise gate/compressor work as when i test it on pc my voice is cut off. i could figure it out by playing around but the wave link works better and is easier to use. the settings do save on the wave xlr, but i just need to figure out if the plugins also save and carry over to another device.
@UnitedcPluginАй бұрын
A fan of your content and I hope my content helps you as well. BTW, what headphones are you using? they look so comfy.....
@StreamGearTalkАй бұрын
Thank you! I use the beyerdynamic dt770's
@GentlemanGaming11222 ай бұрын
First Comment 🏆 07/08/2024 🫡💯🗣🔥 What's up GNR! Good to see the consistency and you uploading good content still. Keep up the good work!
@StreamGearTalk2 ай бұрын
Thanks GG. How are you doing pal ?
@miguelarrochosilva56252 ай бұрын
👍
@Tony-rz4ks2 ай бұрын
i have wasted like 3 hrs trying to get my audio to sound right...i just keep hearing low static in my recording..I just cant figure it our..i have tried like 8 other elgato plugs vt and still the same...the static wont go way or I get an empty room sound. so fustrated waster 3 hours on this.