Best Footwell Upgrade For Can-Am Outlander? | Quad Logic Steel Footwells Install & First Impressions

[@briancarmichael1668]

I have my 650 Outlander stripped apart, to make some modifications and add a lift kit and rad re-locate. It’s 4 years old and I do some moderate mudding. I was shocked how much mud and crap came off it. I more than half filled a Rubbermaid garbage can. And filled my shop vac. I miss the simplicity of the old quads from the 80’s and 90’s. They were so easy to work on and there was no where for the mud to hide.

[@1duramaxhd]

I’d have to change out the chrome nuts to black

[@annexoffroad]

Best looking aftermarket footwell Ive seen.

[@quadlogic3198]

Great Vid, Thanks for the awesome review!

[@LetDirtFly]

Thank you for making them ! lol

[@hydro_rebel7741]

I also have an aftermarket skid plate that covers the footwells. Would that be an issue you think?

[@LetDirtFly]

No it should not.

[@lloydmarche7263]

Great clearance , easier removal for service and looks great. Definitely worth the cost and effort. 👍

[@LetDirtFly]

We feel they’re the best on the market 🤘🏼

[@dennisporteous3613]

Great video, looks like Seth also did a snorkel update as well.

[@LetDirtFly]

Yeah i got if for a great deal.

[@robbieburt4493]

Could you write down their website what state is this in well they ship to Canada I'm interested thank you

[@LetDirtFly]

Link is in the description.

[@Matt-bx6uh]

@LetDirtFly Does the clutch side leave space to remove the cover bolts? Thanks

[@LetDirtFly]

No, but you can have the footwell off in under a minute. Stock footwells your “supposed to” be able to remove the clutch cover while the footwell is in place, but in my opinion it’s a huge pain, so I end up removing the footwell each time to save the 1000s of curse words id be saying trying to get to the lower cover bolts 😂

[@ronlawson5819]

Nice looking setup….messaging them about a 2022 Renegade 850 XXC

[@Dim154-BoS]

Look great. I hope they come out with a pair for 1000 XMR.

[@LetDirtFly]

That would be nice!

[@charles1127x]

I got these with 32" Terminators and am getting some rub in the front when I hit bumps or g-outs. Even with trimming some of the plastic in the front I still am getting a bit of rub. Are you getting that too?

[@LetDirtFly]

Haven't had any rub with the teraches. Marshall had a slight rub when coming down from a wheelie.

[@jramsoil]

What size aztecs were on before putting boards on.. I just purchased these boards and 30 inch aztecs for my xtp 1000..

[@LetDirtFly]

We had 30s originally. These floorboards fit 32s no problem. The only think you’ll have to do is trim four plastics like an xmr. If you look at an xmr vs a non xmr, the front and rear come straight down with the floor boards. On a non xmr they curve inwards and have about 1-1 1/2” of extra plastic that doesn’t need to be there. It’s very easy to do with a piece of tape and an angle grinder.

[@jramsoil]

Did you guys have any issues with your plastics lining up as good prior..got mine installed.. Seems I may have pulled the sides down maybe to far..

[@hydro_rebel7741]

I have the 1000 xt, I put 28 inch blackwater evos on, I trimmed lower footwell plastic to clear truning, but they rub where the footwell and fenders meet when suspension is compressed. Will these fix that issue?

[@LetDirtFly]

It should give you plenty of clearance.

[@minnesotaxmr]

Great looking foot wells. The others I've seen have goofy bolt/spacer/nut attachment for the front wheel well covers. I'M SOLD. 1 question, do you have to remove foot well to remove the clutch cover. I've had a few belt changes on the trail so that's sort of important. As always. "Ride Hard and Be Safe" and keep the camera on. Can't wait for more 850 rebuild.

[@LetDirtFly]

Yes, you have to remove it to get the belt box, but compared to the stock footwells, it takes seconds to remove the foot well. Only the 4 bolts for the base and then just loosen the clamp bolts and slide it off

[@minnesotaxmr]

@@LetDirtFly I thought you'd say that. I can get the cover off without removing stock foot wells now, but the trade off is a great look, easier removal, sturdier and better clean up. You're right, it should be a can am add-on. I'm still sold. Again, great video. MN Bill

[@garrettaman]

By far the best looking boards on the market!! Wish I would have known about these a month ago 😬

[@LetDirtFly]

They have been out just no one seems to know about them.

[@bhinsch25]

Looks great. Thanks for the video.

[@scottsaurette7365]

Do these allow for 32 inch tires?

[@LetDirtFly]

At the end of the video we put 32s on.

[@scottsaurette7365]

oh, nice! No issues with the 32's rubbing? @@LetDirtFly

[@coltonspeer3005]

You should do a review on ur new ram truck.

[@AmotorB]

I like those floorboards! Question. Do you guys have any plans on going to Mud Bash next year?

[@LetDirtFly]

I was looking at the dates, and there is a chance that one or both of us might make it down. Nothing is concrete yet.

[@AmotorB]

@LetDirtFly Okay! We have a group as of right now. If you're able to make it it'd be cool to ride with you guys!

[@LetDirtFly]

Definately. That would be cool. I think we could hook up with 2 up and 2 down too

[@AmotorB]

@LetDirtFly That's the group I'm gonna be with! Let me know if you guys can make it and we'll go from their!

[@LetDirtFly]

Sounds good

[@Matt-bx6uh]

Love the look of these boards just wish the lines on the front were a little bit nicer considering the effort they put into following the body lines. I rate them 9/10 if they fixed those lines it would be 10/10

[@LetDirtFly]

It's just a little trim. Not hard to do.

[@Canam10004life]

Best looking floorboards I have seen for sure. Too bad the didn’t have a removable panel on brake side so you can get at gearbox fill. Congrats guys 🦾

[@aaronlangdon9064]

Lucky 7 looks best imo

[@LetDirtFly]

That would be nice. It would take about 2 min to take it off so not terrible to remove it for full access.

[@lukidd]

Makes me wanna get them, they look so good. Do they make em for MAX models too?

[@LetDirtFly]

No max models yet.

[@lukidd]

@@LetDirtFly that sucks!

[@Dusdaddy]

These do look great. Do you have any experience with stock Can-Am mud/snow footwell pieces? Those don't completely replace the footwell but the openings are huge for drainage.

[@ronlawson5819]

I put a set on a 650 Outlander total pain to do

[@LetDirtFly]

Never installed, have seen them. If you're looking to stay under an inch 30 tire, they would probably be a decent investment.

[@paulgarcia6257]

None for the max models 😞

[@LetDirtFly]

Maybe they will come out with them soon.

[@legowolf22]

Very good looking. There are some ugly ones out there for sure. If I end up going Outlander these will be the ones but Im starting to think I should just go full send and get the one Ive always really wanted with the Reny 1k. Calling my banker today to set up an appt with her.

[@LetDirtFly]

They should fit the renny too.

[@TaylorBonnett]

yeah far mudding floor baurds suck lol

[@kevindechambeau7762]

These do not fit as advertised.I have them and they do not fit thirty two inch tires.......

[@LetDirtFly]

We have 32” tires and they fit perfect with ours. Do you have a xmr or a normal outlander. XMR have stiffer suspension that lifts them. If you have a standard outlander, the suspension is soft and you have have slight rubbing because your ride height is lower