Best Holsters for Glock 43x/48 MOS w/ Streamlight TLR-7sub | IWB and OWB

[@nicknewburyshooting]

I love the way this video starts "So you've bought the tlr7 and need to know what your holster options are" because like myself I believe most people bought the tlr7 without picking out a holster first lol.

[@18wheeler77]

TLR7 Sub.

[@innerpowercouple]

Yup. 🤚

[@vtxdaryl]

You have to have a rail on the pistol for the TLR 7, my 43X or 48, non MOS, have a rail. So I had the 43X then bought a 43X slide with MOS MOUNT. Now I can’t find a IWB holster that fits my needs.

[@vtxdaryl]

Why are you looking behind you? You better keep looking ahead because the guy you just shot might still be alive and is pulling his pistol out of his IWB Holster to repay you with lead. Trying to make a joke about how funny that looks.

[@nicknewburyshooting]

@vtxdaryl nah brother I'm confirming for sure. That definitely won't be an issue

[@OBZ74]

Best holster in the market from the most underrated company! Throw out all my holsters and bought Werkz holsters for all my firearms ❤

[@GUNFUARMS]

You guys make the best holsters hands down!

[@stevennydish1529]

I just received my holster from Werkz for my Glock 43x Mos. This is a solid built holster, fits my Glock perfect! I will be ordering more holsters for my other guns. Thanks for a great product.

[@WerkzHolsters]

Thank you for your support and positive feedback!

[@jermainewindham6024]

Just ordered my third holster. I have two previous for my Canik TP9 Elite SC and my Springfield XDS-9 OSP. Now I just ordered one for my Glock G43X MOS.

[@WerkzHolsters]

Thanks much for your continued support!

[@ladisprikryl6886]

@@WerkzHolsters Pěkné video

[@dellis35]

Received mine a couple days ago. Came much faster than expected and I’m totally satisfied

[@MicahsRants]

Shane literally makes the BEST holsters in the industry hands down!! I’ve hand my 43X MOS with Holosun 507K for a while now and will be ordering both of these holsters to add to my collection!! Great job brotha 🤙🏽

[@WerkzHolsters]

Thank you for your positive comments!

[@SwissCheeseEm]

I highly disagree. I bought one and received today. Worst retention / reholstering I've ever experienced

[@xjugganotx738]

I've been carrying the Werkz IWB Holster for my G43X + TLR7 Sub since it was first released and absolutely love it. Can't recommend this company enough.

[@jamalwashium5387]

It doesnt fit right

[@ShawnBrockman-xl2yc]

Too bulky. You may want to check out Vedder holsters.

[@johnnytorres277]

Great holster and great advice. Thank you. I might pick one up. I hate to be one of those guys but just a tip at 7:00, I was trained that my left hand lifts up my shirt while my right hand draws. Its much faster than lifting your shirt and drawing with the same hand.

[@WerkzHolsters]

Johnny, thanks much. I train my concealed draw a number of different ways, including one handed for those cases in which my other hand might be occupied. Thanks!

[@az_desert_hermit9507]

I just ordered one of these and i am excited to see how well it "werkz"

[@WerkzHolsters]

You should have received it by now. I pray it is meeting or exceeding your expectations!

[@az_desert_hermit9507]

@@WerkzHolsters Yes! I did receive it and I am extremely happy with it!! Thank you!

[@WerkzHolsters]

@@az_desert_hermit9507 I'm happy to hear it thank you very much!

[@pellettron-nj9ci]

I just bought an M6 for my G34 mos with pl-pro light and some C hooks. And I must say this are one of the best holsters out there. If I find a TLR7sub for my G48 mos at a good price, I will defenately be buying another M6..Highly recommend this guys. Hello from Puerto Rico..

[@WerkzHolsters]

Great to hear from you thanks for the encouraging feedback! Greetings from Idaho. :)

[@LitteLeo]

Just bought my werkz IWB holster. I tattoo for a living and I’ve been looking for a IWB holster to carry my Glock 43x MOS comfortably while sitting for hours at a time. Awesome video.

[@Travios1115]

This guy just sold this holster. Buying 2 right now.

[@mahtanyavetil]

One of the best holsters in the industry, Excellent Quality Came much faster than expected and I’m totally satisfied.💪👏

[@dansparks8561]

I just ordered mine yesterday, I'm looking forward to trying it out!

[@longjonz88]

Thank you Shan! My M6 holster aiwb for my g43x just arrived today! It fits great and it's super comfortable

[@WerkzHolsters]

Thanks Long for trusting us with your business!

[@ezekielmajor5511]

I only use Kydex holsters. They fit my Glocks perfectly. I will be getting one of these for my G43x MOS soon.

[@yamcha7168]

I’m super sold on the M6 I can’t wait to get it

[@Dan-bj1cz]

Best holsters by far. I bought from Tier 1 and La Concealment for my 43x Mos and and my 43x would not get that click for retention and they blamed it because I had stippling done on my handle which is a bunch of bullshit. With Werkz I had no problem at all. If you want the best holsters definitely buy from Werkz.

[@WerkzHolsters]

Hey Dan thanks for the feedback! We do spend a ton of time to get that tactile (and hopefully audible too) conformation upon reholstering. I have to say that the TLR-7s (including subs) are super hard to get just right. We have revised the molds for the Subs a bunch of times... too many to count. And, to your point, light bearing holsters shouldn't retain on the frame... they should retain on the light. Blessings!

[@Richdoesit-1]

I ordered this recently. I LOVE everything about it EXCEPT when I re holster it does not slide in smooth. It catches the edges on the appendix rig. I was practicing my draw about 300ish times through out the day to see if its just a “break in” issue and its still happening. Im still gonna carry it because its the most comfortable holster i have. But thats the only hiccup, i give it a 9 out of 10 👌

[@douglasphillips24]

Great content & holster . Just ordered a 43X MOS & will need a holster for it . Thanks. God bless.

[@johnmuse6362]

Your the man my friend….you got me set up on my 19x & now my 43x mos that I haven’t even bought yet hahah. Have holsters iwb & owb on there way…..& love the paddle from safari 👍🏼💪🏼

[@WerkzHolsters]

Thanks much John! I do like the Safariland paddle option for the M7 as well... makes for convenient OWB carry.

[@RidinDirtyOutdoors]

Just picked up both of these. Excellent options

[@WerkzHolsters]

Thanks for purchasing from us!

[@RidinDirtyOutdoors]

@@WerkzHolsters 💪🏼💪🏼

[@nuclearknight8543]

I’d just glue soft leather on the body side of the holster. I make my own holsters but would love to try this one out

[@darienknight2210]

Just received mine! Amazing quality. And comes from my home town!

[@WerkzHolsters]

Thanks for your feedback! We love being in Potlatch and plan to continue hiring folks from the local area as well as improving the building we are in to make downtown look nicer!

[@OhThatsBabyJoe]

I think I just found my holster! 🙌🏾this is beautiful. I’m new to the glock community, I’ve heard nothing but GREAT things about this company, I will be purchasing one soon!

[@WerkzHolsters]

Glad you found us! And yes, we believe our G43x & G48 MOS holsters for the Sub are excellent. We look forward to serving you!

[@vtogvblog]

Welcome, just got mine to. Especially since my house got randomly shot up last night.

[@WerkzHolsters]

@@vtogvblog I'm so sorry to hear about that! Would be interested to hear more. If you reach out to customer service [e-mail] they can put you in touch with me. I would be interested to hear your story.

[@Roadrider19119]

I wish you would make holster that is just for the Glock 43x. I appendix carry. I hate the extra length on the holster. There is a reason some people chose the 43x over the 48.The shorter slide is more comfortable. Having a 48 holster defeats the purpose.

[@WerkzHolsters]

When the light is longer than the pistol, we have to make a choice on where to cut. That said, if someone wanted to cut down the holster and polish the edges, they could do that relatively easy.

[@Michael-yt3wz]

Own 2 so far (19x and G27) and will be purchasing a 3rd for the 43x. Just need to figure out the setup first.

[@WerkzHolsters]

I rather like the G43x MOS... solid little pistol.

[@AJ-gk7bn]

Would really appreciate a good look at the gap between the holster and the trigger. I’ve found a fair amount of holsters that support weapon lights have *much* too large of a gap than I am comfortable with. Especially for inside the wasteland. I have no doubt these holsters are high quality, and appreciate their feature sets. But without getting a good view around the trigger area I couldn’t pull this trigger on one. Pun intended. I am very interested though. If anyone has one of these and could let me know how theirs is I’d appreciate it.

[@Highgear145]

Absolutely great holsters 👍

[@WerkzHolsters]

Thank you for your feedback!

[@scarface13205]

I love my M6 holster!

[@JM-vk3qg]

The appendix holster is a great product. The owb holster won’t let you walk through a doorway they stick out so far

[@jasongonzalez8812]

I’ve been looking for a holster for my 43x MOS with tlr-8sub…..I’ll be trying this out. Thank you!

[@1026timey]

SOLD! Thanks for the video guys, also using such a handsome devil as Shane sells it!

[@jasons7180]

This guy is the Gale Banks of guns

[@DFWCASSANOVA]

Just got my M6 Radius (Gen4 G19 w/Baldr Mini" in a couple days ago, and Absolutely loving it thus far! I will be doing a review as soon as I get my Ulticlips in here shortly to complete the set up. I was wondering what the bump was on the inner side at the front serrations for. I had figured it was too keep the hot barrel away and or add extra pressure to the body to counter push the pistol grip in, and that's basicly what you confirmed here, love it. I got the single mag pouch but should have purchased the KA-BAR TDI pouch as well to complete the load out. I suppose I will get that shortly. Speaking of Radius optional accessories you spoke of on another video, I would like to see an adjustable suppressor pouch as an accessory since here in Texas we just fully deregulated "Texas Made" suppressors(well soon as of September 1st). This way I could keep one on me at the range/ranch ready to go but not mounted on the pistol. I would also very much like to see a Strike 80 holster offered from you so I could inter change my Radius options to carry my custom Glock as well. Keep up the great Ingenuity and products.

[@WerkzHolsters]

Jason, thanks for the excellent comments! We have tossed around some thoughts on suppressor holsters, but haven't dedicated the design time to it yet. And yes, the "bump" has a couple additional benefits that you mentioned -- glad to see that it was intuitive for you.

[@joeytomato]

I wanted to love this holster... But it doesn't ride low enough for me. And there's no option for a low ride position for this, or any other IWB holsters they make. Now it just sets in a box with half a dozen holsters.

[@WerkzHolsters]

Joey, I guess by "no option to ride lower" you mean you don't want to try the deep carry position of the belt clip (you have to remove the clip and reposition screws), and you don't want to purchase c-hooks which can let it ride even lower. Sorry your experience didn't work for you, but we do try to make things as modular as possible. Blessings!

[@joeytomato]

@@WerkzHolsters I didn't say "ride lower", I said low ride... Moving the clip up 1/4 of an inch, makes it ride lower, but it doesn't make it an IWB "low ride" Holster. But, at least you're just as condescending as the fella that answered my email. So... Consistent!

[@timowens7214]

Love my m6 with the additional mag carrier

[@WerkzHolsters]

Thanks for the feedback! We are still working on the mag carrier for the G43x/G48.

[@fkin8shyt]

@@WerkzHolsters Any news on when those will be released? Will they work with the S15 magazines?

[@WerkzHolsters]

@@fkin8shyt Glock g43x mag carriers will launch next week. We will produce DIFFERENT ones for the Shield Arms S15, and those will probably be in the next couple weeks. Hope that helps.

[@fkin8shyt]

@@WerkzHolsters It does help. Thank you very much for the response.

[@JoshThompson25]

Ever thought about designing some kind of clamp clip for athletic / sweat pants and shorts?

[@phillip4881]

how do I order one for 43x without any attachments?

[@fdjcorp]

Where does the M6 lock? Will the holster still lock if I don't have the TLR 7 Sub attached to the Glock 48 MOS. I want it to be an option whether to attach it or not. Thank you for the response.

[@wilfreddavis125]

Well thought out holster system for my glock 43x it works so well i will be purchasing the outside the waistband model also.

[@WerkzHolsters]

That's great news for us! Thanks for the positive feedback Walfred!

[@Jordan-th8ps]

Does the model specifically made for 43x/48 with NO light work for a standard 43? Or is it specifically for the MOS model only?

[@MrChueyengyang]

I'm sold... going to buy one

[@kevinjames8840]

How do you like it?

[@vtxdaryl]

I have the 43x with a TLR 6, no rail, and red dot. Do you make a holster for that pistol.

[@Trail-AdventuresNEPA]

What about Suppresor Height sights?

[@MrBenjaminOfficial]

Make separate holsters for the 43X/43X MOS. Also, make the 43X MOS/48 MOS holsters compatible with the Surefire XSC light, as this is also compatible with those Glock models. So basically, have a holster for each weapon, with and without lights/sights, so we can have a holster specific to what we carry.

[@WerkzHolsters]

Thanks for the feedback. We do have holsters for the G43x/G48 with the Surefire XSC light. As for the slide length, we can consider cutting the holster around the light, then coming back for a shorter slide if there is significant demand. Thanks!

[@MrBenjaminOfficial]

@@WerkzHolsters oh ok nice. Yeah it’ll be good to do that so 43X carriers don’t have the unnecessary length.

[@ckcx918]

@@WerkzHolsters let's do it! ️️‍🔥 Would love to see the contoured shape of the 43X MOS shorter slide with the TLR-7 sub

[@CameronLestagez]

i am trying to buy but when i refund search it says you do not have a product like that. Now do you sell the one for a glock 43x mos with trl 6 ?

[@EnergizerTX]

will you offer m7 for olights? also, will the holster operate without the light or is it required for the holster to work properly?

[@grayman4405]

Thanks for my M6, unfortunately I’m 2 months into my TLR-7 Sub back order.

[@WerkzHolsters]

That's a bummer... I was hoping that there would be more on the market by now. Hopefully you'll find the Sub worth your wait!

[@grayman4405]

@@WerkzHolsters yeah me too. My current edc is a 43x non MOS with a tlr-6 and I run Shield s15 mags. I love the 43x but the tlr-6 is anemic. I’ve waited 5 months on the MOS, optic, and optic adapter. Another 2 months so far on the tlr-7 sub. I’ve got the M6 and spare mag holder, very nice by the way. The last piece of the puzzle is the light. Unreal 😕. I appreciate that you folks are all about filling the need. Others apparently don’t care.

[@brennenhudson7626]

Yeah I ended up just searching and buying it at a hight price because I couldn't wait anymore. It is really nice with this holster.

[@WerkzHolsters]

@@brennenhudson7626 Understood... it's the early adopter penalty! :)

[@WerkzHolsters]

@@grayman4405 We are absolutely committed to (a) supporting pistol mods, and (b) supporting as many combinations of pistols and lights possible with -custom- fit holsters. Appreciate you noticing. Also... we still need to get our S15/G43x mag holders done; stay tuned for those. If you have any specific feedback for our products, emailing customer service will get your thoughts to me. Most of the features we include are as a result of comments from folks like you. Blessings!

[@bishopgeorge1333]

Nice holster but I see that you haven't made one for the SA Elite XD-m 3.8" Compact 10MM I will wait until you have one.

[@WerkzHolsters]

Feel free to request it here, if you'd like! werkz.com/new-holster-notification

[@GrblNmyHidyHol]

Not available with the TLR7 anymore?

[@johncaputo205]

I would try this holster only if I can get a mid sweat guard I don't like a full sweat guard..

[@WerkzHolsters]

We have a video segment for that at 11:56 of kzbin.info/www/bejne/p5iZpqN-gtt6lbc

[@free2befree]

Are y'all planning on doing a sidecar mag holder for the 43/48 mags?

[@WerkzHolsters]

In a word... Yes!

[@Aviation_Professional]

43x with tlr-6 and Zaffiri comp ... Any IWB options for that setup by chance?

[@irwinmendoza6662]

Any chance y’all can make a holster for a 43x with a recover tactical rail and a compensator

[@WerkzHolsters]

Irwin, there are too many 3rd party rails for the G43x (and other pistols) out there, leading to massive customer confusion and support issues. If a customer doesn't have the --exact-- configuration we build for, they end up unhappy, and making clear notes in the description doesn't mitigate that issue. The current decision is to avoid the issue altogether.

[@cannotbeshaken7889]

I have a Glock 43x MOS with LTR-7 Sub Light. The light sticks out further than the barrel. Yet, on the Wertz website, the holster for this gun is shaped the opposite, in that the barrel comes out further than the light. So, I'm confused, and this is what's keeping me from purchasing.

[@fr3einfo745]

I had the same question and I almost stayed away from this product because of your comment, but … this video is to demonstrate both the 43x and 48; the 48 being longer than the 43x. At minute 0:24 of this video, you see the 43x with LTR-7 sub light which sticks out of the barrel. The rest of the video demonstrates the 48. That’s why the barrel sticks out in the rest of the video, which makes sense. I hope this helps! I’m just surprised Werkz never responded to your comment and it’s been 11 months since you posted it.

[@cannotbeshaken7889]

@@fr3einfo745 It's been a while, but I think I remember coming to this conclusion. But it was after I already found one somewhere else. I ended up getting mine from Henry Holster. I love it, so it's all good. Thanks so much!

[@superbaddz5873]

if i buy the holster made with the light, will my 43x fit snug without the light? i don’t need the light now but down the road i might

[@dylanmartinez2157]

Good looking holster! Would you say running the 20rd SA mags would be more cumbersome compared to the S15? Thanks!

[@WerkzHolsters]

I'm sorry I don't have any good advice here. Thanks for the positive feedback though!

[@FirearmNoob]

Are your OWB holsters RTI compatible? Thank you for making this video, extremely useful information on the glock 43x/48 mos + tlr7sub combo.

[@WerkzHolsters]

Yes, the M7 holsters have the Safariland pattern, which can be used with RTI hanger #39. Hope that helps!

[@haydenleach64]

I have the baldr s on a Glock 43x mos what holster can fit?

[@romeoechofoxtrot18]

I hope this holster works with the CR920 because if it does... so long m&p shield

[@WerkzHolsters]

I'm still trying to source a CR920 myself...

[@romeoechofoxtrot18]

@@WerkzHolsters I'm excited for this you folks do great werk 👍

[@WerkzHolsters]

@@romeoechofoxtrot18 Thanks for the positive feedback! I see one of my distributors has a couple CR920 in, so I picked one up. I should know about compatibility within a week or so.

[@ebizzle1046]

Ive been searching for OWB Glock 43x with PL mini 2 on a recover tactical rail holster.

[@WerkzHolsters]

I don't have a solution for you.

[@eddiet204]

I’ve been carrying off duty daily for almost thirty years. I’ve tried almost every method of carry and can’t for the life of me understand how people IWB and appendix carry. How do you sit down, drive, etc? It’s THE most uncomfortable method of carry I’ve experienced.

[@LegendaryZG]

I’m pretty new to guns, got my first carry pistol and have been since March of 2020 at 22 years of age. I have been strictly appendix knew it before I started carrying. However, the trick is what belt are you using? A traditional 5 hole belt won’t do you any good. I use a kore essentials tactical belt. Worth the money because it allows you to adjust it with the switch of a lever. So right before I sit down I relieve some of the pressure and right when I get up I adjust my belt tighter. It’s a game changer. Look into it 👍🏼👍🏼

[@OTG_Zulu]

First time I concealed the big iron was appendix and haven’t looked back. You’ve got to put the muzzle either on the fupa or just next to it on the inside of the leg where it bends. Confusing to explain but in practice it’s really simple. If you’re a bigger dude longer guns are better because they bridge the 300th parallel and the fupa, but depending on the severity of your dunlap syndrome you may have more or less grip printing. If done correctly the gun will stay vertical in all movements. The only time you’ll get a hotspot is when you try to bend way down to pick up the chicken tendy you dropped on your last combat tour to the fridge bf you RTB, aka your moms basement.

[@thomasjefferson1081]

Will it retain the pistol ok without the light? I just bought my 48MOS and will probably add a TLR 7 in a month or two as funds allow, after I get an optic.

[@WerkzHolsters]

Our holsters require the light to be on the gun, as we retain on the light body. It is dangerous to run the gun without the light in this holster as it can move around and fall out.

[@eloucha7694]

I would love to buy it only holster I carry hybrid Bc on my body type I know is not very safe so my question do u think I can add like a cushion on back.

[@WerkzHolsters]

I believe anything is possible. If I were to try to attach something to the body side of a M6, I would drill into the "wedge" area toward the bottom of the muzzle, then attach there. We should have some Chicago screw / barrel assemblies available on our site or get your own. Our holsters aren't made for it, but I suspect it would work.

[@CadenMichnal]

I’m torn on having this exact 43x set up with the light and Suarez compensator, which would make it as long as the 48 except it would have less barrel length making it less accurate but possibly better recoil than the 48. Versus getting the 48 which is more accurate but I wouldn’t use the comp on it which would give more recoil. Any suggestions on which one to pick when factoring these in?

[@WerkzHolsters]

My opinion is that all modern semi-auto pistols from reputable manufacturers outshoot the operators. The biggest thing most of us can do to increase accuracy is to add an optic. I don't find the recoil on the g43x or g48 that bad either way, but that comp may contribute to faster follow-up shots, especially with high power ammunition. I'm currently planning on changing my EDC from a G34 to a G19x with a comp. I say run what you like... most pistols will outshoot you unless you're shooting multiple thousand rounds per year. Not sure if that helps. The Internet is full of opinions... hopefully mine is not terribly biased.

[@CadenMichnal]

@@WerkzHolsters love the opinion. I like the 43x idea because for a cary gun it will allow for faster fallow up shots. But I also like the accuracy of the 48 barrel length more for plinking around out to 50 and 100 yards. Did you find the 43x to have less recoil while comped more than the 48? P.S. I’ll be getting the 507k and I’ll be using the 2 moa dot with out the ring around it. Which is why I don’t know what barrel length to pick

[@WerkzHolsters]

@@CadenMichnal If you're accurate to 50-100 yards using a subcompact, then you're toward the advanced end of shooting. I've not shot the G43x MOS / comp side-by-side with the G48, though I'll probably do that in the coming weeks to compare recoil as well as any low light visibility differences. Until then, I don't think I can add much more valuable input.

[@CadenMichnal]

@@WerkzHolsters I’ll keep my eye out for that review than, I’ll hold off on buying for a little longer. It’s just comes down to recoil management and grouping accuracy for me

[@WerkzHolsters]

@N K Not opposed to the G43x direction at all! You can see me shooting a G43x MOS with a TLR-7 Sub and a Suarez comp in some other videos. And yes, we have Shield S15 mags in house. I may run that at some point. But right now, the best lights are full size, and that's why I'm running a longer pistol. With the PL350 out, I"ll likely start running that. And that light is the longest on the market.

[@chgofirefighter]

When will you be making a Level 2 OWB type holster?

[@WerkzHolsters]

We do not currently have an ETA. Thanks for asking!

[@chgofirefighter]

@@WerkzHolsters Most LEO's prefer some sort of Level of security on their holsters, preferably a Level 2. Sadly, there isn't many that offer such for OWB purposes

[@WerkzHolsters]

@@chgofirefighter Understand and agree.

[@mrglock2002]

Is this holster appendix only or can it be carried at 3 and 4 o’clock also I don’t carry appendix but I’m thinking about ordering this holster for my 43x

[@WerkzHolsters]

You can run it at 3 or 4 o'clock as well! Some people take the claw off for that position.

[@TheMP45]

What kind of time frame are we looking at for the sidecar mag holder for the 43x mags?

[@WerkzHolsters]

My best guess is "weeks", but that's subject to change.

[@Negusvibes813]

I can't find the Glock 48 gen 1 holster with no light mount on the website

[@WerkzHolsters]

Our team reports good usage of that pistol in the G48 MOS no light holster. Hope that helps!

[@rolylt1l528]

Dose your holster work good without the light

[@WerkzHolsters]

Check out our video on things a light bearing holster will not do. In short, it will hold the pistol, but retention is on the light. No light = no retention. Hope that helps!

[@Robert-jx8nr]

Someone help me out, when I go to stream lights website and I click Gen 5 I don’t see an option for the Glock 43x mos I only see the option for the Gen5 Glock 48 mos

[@WerkzHolsters]

Hope their spec sheet helps: www.streamlight.com/docs/default-source/data-sheet/tlr-7-sub-data-sheet.pdf?sfvrsn=5c66b0f0_61

[@Robert-jx8nr]

@@WerkzHolsters I just ordered this holster off you guys 🫡

[@israelnavarro3626]

I got 1st gen Glock 43x & I got a recover tactical rail & olight baldr mini. Which one would be best for IWB righty carry

[@WerkzHolsters]

Sorry we don't support aftermarket rail adapters at this time. Thanks though!

[@VinceLivesInEmerica]

Hey Shan, which threaded barrel do you use? And is that a Suarez Street Comp compensator on the end? Thanks

[@WerkzHolsters]

Vince, good question. The G43x has a True barrel and a Suarez Street Comp.

[@gizmorock007]

43x option with stream light not listed on the web site yet? Only find 48

[@WerkzHolsters]

Good point -- I'll change the title... it's for both. With the TLR-7 Sub, the holster comes to G48 length. But this holster fits both (see description for more detail). werkz.com/m6gl48msttlr7sgr.html

[@gizmorock007]

Ok thank u will be ordering one 👍

[@dominicletigio3273]

How to order holster

[@jameswinstoo72onTElegRA]

I got mine 👆👆 from the name above on telegram I help me build it and got it delivered to My address

[@DARENNARINE]

Which threaded barrel is that and what compensator are you using?

[@WerkzHolsters]

True barrel and Suarez comp.

[@362chop]

Outside the Sticky Holster they’re all uncomfortable. Just remove the holster before reinserting, any issue solved.

[@HotBrass-Lead]

Do you have the sticky holster for the 43x tlr7? How is it

[@362chop]

@@HotBrass-Lead live got the “M” series just can’t recall medium or large. If you like being comfortable this is the choice. Removing while holstered also a breeze. My EDC. All the best👍🏻

[@2HELNBAK]

Do we have a model that will fit the G43X MOS Rail+ Trijicon RMRCC w/ Surefire XSC!? Thx

[@WerkzHolsters]

Sure do! Just plug in your gun and light on our holster finder and it will show you the holsters that work for that setup!

[@mattconklin4026]

Question, I have the 43x with a recovery tactical rail & a tlr7a & soon a RDS, Would this holster work, if not, do y'all make custom orders? Also whats the holster with the 2 clips?

[@WerkzHolsters]

We don't currently have any holster that'll work with aftermarket rails, and we cannot supply custom requests.

[@mattconklin4026]

@@WerkzHolsters ok, thanks for getting back to me! ✌️ Your content is very informative! 🇺🇲

[@grayman4405]

What compensator are you running if you don’t mind me asking?

[@WerkzHolsters]

We put a Suarez comp on this pistol.

[@grayman4405]

@@WerkzHolsters thanks!

[@WerkzHolsters]

@N K We put a TRUE barrel on it, but check the Suarez site for more information about their comp compatibility.

[@billetter2200]

Will your IWB fit the new Shadow Systems CR920 subcompact with a TLR 7 sub? What would I order specifically?

[@WerkzHolsters]

I don't have a CR920, but I've reached out to Shadow Systems to see if we can purchase one and bring it in house. You may want to drop them a line as well encouraging them to work with Werkz. Blessings!

[@roypaulcarter4654]

Cool

[@treyjohnson2710]

Any idea what threaded barrel on this pistol, I’m running a faxxon threaded barrel but with my t comp there is a little gap. Switching to Suarez soon.

[@WerkzHolsters]

Our current barrel in the G43x MOS is stamped "TRUE". I think the Suarez comp could work with just about any barrel that has the proper threads because of the way it locks on.

[@jonpaulthomas1]

Got it. It’s legit

[@WerkzHolsters]

Thanks!

[@2thestreets88]

Does your company have a holster for glock 43x without mos and rails... that is now using Recovery Tactical rail to run Olight Valkerie mini or Olight Baldr mini ?

[@WerkzHolsters]

If you're asking if we have a holster that works with a Recover Tactical Rail, then no, none of our holsters work with aftermarket rails at this time.

[@thewoolycontacts]

Will this holster work for the non MOS 43x but with the recover tactical rail with the tlr7 sub? And also with the same comp in the video? I just want to upgrade my light from the tlr-6 to the 7 and also have a comp

[@WerkzHolsters]

No, this will not work with 3rd party rails.

[@DnyLcy0930]

Does the O-light baldr 800 fit this holster?

[@WerkzHolsters]

No. See kzbin.info/www/bejne/p5iZpqN-gtt6lbc for details.

[@kh1474]

No left handed option???

[@WerkzHolsters]

They show up for me when I use the holster finder. Check the link below. werkz.com/amfinder?find=glock-g43x-mos-streamlight-tlr-7a-sub-for-glock-left-122274

[@kh1474]

@@WerkzHolsters Thx

[@ashgonza92]

What's the difference between the TLR-6 and 7?

[@WerkzHolsters]

TLR-6 mounts on the front of the trigger guard and only has 100 lumens. The TLR-7sub has a huge output advantage. We also like the TLR-7a / TLR-7Sub switches a lot more than the TLR-6. Hope that helps!

[@alintiniuc]

Is this holster compatible with the PHLster enigma?

[@WerkzHolsters]

We have attached it to the enigma, and it works, but it might be best to remove the claw. Your mileage may vary...

[@georgemuller7083]

Hi I have the Glock 43x with rail at bottom the one before 43x MOS and want to get the tlr 7 sub light but want to know if I stil have to order the holster for 43x MOS?

[@WerkzHolsters]

I have yet to see or be aware of any railed G43x before the MOS. We have the original G43, the G43x with the extra capacity, and the MOS with the optic cut and rail. Can you direct us to a page on Glock's site with your version with the rail before the MOS? Please email customer service [e-mail] and they should be able to help you.

[@georgemuller7083]

@@WerkzHolsters I have the G43x rail subcompact if that might help you so it has the rail for light but not the plate on top for red dot sight😁👍

[@WerkzHolsters]

@@georgemuller7083 Got it. This one: eu.glock.com/en/products/pistols/g43x-rail I don't have that exact pistol in the shop, but I believe from our holster perspective the G43x MOS is the equivalent.

[@georgemuller7083]

@@WerkzHolsters thank you for your quick reply I am going to order my holster today😁👍

[@Kattbirb]

Two questions, will this fit a Vuurwapen HMC9 frame with a TLR-7? And will this be compatible with a lightbearing Phlster Enigma?

[@WerkzHolsters]

Regarding the frame, likely not. If the rail is positioned at all differently than Glock's then the pistol & light combination will bind when inserting. Looks like the HMC9 frame drops that rail down versus Glock, so I doubt it. Regarding the Enigma, we do not specifically test or guarantee compatibility with the Enigma. That said, we have tried holsters in house with it, and it seems to fit our hole mounting systems just fine. You may wish to remove the claw on a small / subcompact pistol. Hope that helps!

[@Kattbirb]

@@WerkzHolsters Thank you for getting back to me! I'm glad to hear that your holsters are often compatible. I may try your holsters for other pistols in the future.

[@90zLyfeTV]

Anything out there OTW for the Glock29 w/ TLR-8

[@WerkzHolsters]

We would like to provide support for the 10mm/45acp Glocks at some point, but do not currently provide that support.

[@maxspowers1515]

What is the model for your holster for a Glock 43x mos with TLR 7 light !?

[@WerkzHolsters]

Sorry about that the links were dead. I've updated the description with current links. Thanks!

[@joshhobbs287]

Is this available in a lefty format?

[@WerkzHolsters]

Yes, we are making these in both right and left hand versions -- both the M6 and M7 are available in left hand. All our new holster designs are supporting both right and left at launch. See werkz.com/ for our full selection. The holster finder will show you either right hand or left hand results.

[@korazjian5251]

Did you guys take down the m6 for the g43x mos - TLR 7 sub? Website keeps saying no results????

[@WerkzHolsters]

I think that was a temporary website error... should be back up. Sorry!

[@brucefoley1658]

This is my come to holster, but you all don't make one with the olight

[@ty.james189]

Will this work with a trl-6??

[@WerkzHolsters]

We answer that question and more here: kzbin.info/www/bejne/p5iZpqN-gtt6lbc