Best IWB holster for a Glock 19 with an Olight Baldr Pro

Need the perfect holster for your Glock 19 with a Baldr Pro?
---
Find Your Light-Bearing Holster: werkz.com/
Download Our Low-Light Defense Guide PDF: werkz.com/inde...
---
This is the Werkz M6 holster for the Glock 19 / 19x / 45 (and similar sized pistols in .40 or .357 sig) with the Olight Baldr Pro. This holster is in a right hand configuration, with left hand coming soon. Glock 17 versions, including new M7 OWB holsters coming soon as well.
* Designed, Molded, and Fit Specifically For Each Listed Firearm and Light/Laser Combination -- In this case the Glock 19 / 19x / 23 / 32 / 45 Gen3/Gen4/Gen5 with the Olight Baldr Pro. Note that this holster will only fit this combination due to precise molding techniques.
* Carry Inside Your Belt In Any Position - IWB on the hip, straight drop or canted, AIWB deep carry.
* Reduced Print - Concealment claw (removable) secures pistol grip into your body
* Supports Firearm Customization - Slide Mounted Optics (Trijicon RMR), Suppressor Height Sites, Threaded Barrel Drop Through.
* Made In USA - Ships In 1-2 Business Days - Lifetime Guarantee
The key to concealing a light-bearing firearm so you can assure that you're always prepared to identify and control threats in low-light environments? Every detail matters.
This is why the M6 is a light-bearing holster precisely fit to conceal your exact firearm and laser/light combination. We test with each actual firearm model/gen and light/laser (no blue guns). This allows you comfortably conceal your firearm with a WML (weapon-mounted light/laser) all day long.
But that's just for starters.
We have combined our own carry experience with feedback from our customers and utilized the latest 3D modeling and manufacturing techniques to develop a light-bearing holster with attention to details, a holster that will help you:
* Avoid accidental weapon light/laser activation
* Fine-tune a smooth draw with dual retention screws
* Maintain draw clearance so you can get a full firing grip.
* Stabilize your weapon system from unexpected movement and rotation in AIWB with the concealment claw and wide belt clip
* Protect your firearm from excessive holster wear by reducing drag on the controls and ejection port.
* Conceal all day without excess material or sharp edges to cause unwarranted discomfort.
* Maintain full access to magazine release for administrative reloads.
* Carry everyday for years to come with a holster made from high quality Genuine Kydex 100.

[@WerkzHolsters]

Find Your Light-Bearing Holster: werkz.com/

[@illuminatusquis5909]

Will this work with a threaded barrel and raised night sights?

[@WerkzHolsters]

@@illuminatusquis5909 Yes.

[@videosdotcom5221]

This is the set up i been looking for

[@hobbiehobbs]

I’ve searched you tube for reviews of your M6 holster. While you do a fine job with video saturation you really could benefit massively from independent reviews performed by others.

[@oxysz]

Thank you! I’ll have to order this now . I hate having to take off my light every time I carry

[@johnv3087]

Best holster on the market.

[@WerkzHolsters]

Thank you John for your encouraging words! We appreciate you!

[@berkosmansatiroglu]

Please make for canik TP9 DA. Thx. Hi from Turkey.

[@TheRealEMURSE]

I received my holster on christmas eve actually! Got the black friday baldr pro/ penlight bundle for $100 and my buddy randomly offered to buy me a holster cause he knows i have a newer glock and I said I know just the one! A g23 is heavy at 13+1 + a bulky light , however this holster for in the waistband handles the differential perfectly. I needed a light holster fast cause whats the point without one? You cant carry that way safely or efficiently! Thanks Werkz team

[@WerkzHolsters]

Thanks so much for your positive feedback!

[@charles17508]

Wish they had this

[@FLCRACKER85]

Just ordered several holsters last night. Current lead time says 13 to 18 business days. Yikes! Hope they are worth the wait 🙏

[@WerkzHolsters]

Yeah, we're buried right ow trying to continue ramping production to meet demand from you all. I appreciate your order and trust that our products will meet your expectations!

[@BogieSIX]

@@WerkzHolsters What are turn around times right now? Does this holster fit gen 5? Thanks.

[@floatingmosque3813]

A Li-Po bag would be best

[@K0bIMuscles]

Well shit I literally just bought a baldr pro and was looking for a holster and BOOM my prayers have been answered! One quick question who did the machining on the 19x slide? That's another thing on my list to do

[@WerkzHolsters]

Glad we could help! As for the machining, I went with L&M Precision. I wanted to keep the stock Glock 19x finish, while still milling the optic into the slide. Seems that most folks want to refinish instead of just coating the milled area.

[@K0bIMuscles]

@@WerkzHolsters thanks for replying and yea I didnt know you could just have the milled area coated!! Good to know thanks again!!! That means I'll go with them!!

[@josephbearup4787]

Just ordered the Olight BalderPro with red laser 1200 lumen . I have a Gen 4 Glock 23 . I’m being told the 19 and 23 are almost identical, can I use this Holster for my G23 with Balder Pro??

[@TheRealEMURSE]

Did you get 1? 👍

[@josephbearup4787]

No Still Using a Crossbreed that requires me remove light. Actually got a Diff Olight PL mini 2 so the Baldr is now on my AR .

[@patrickmccarthy7186]

are there any that are in left handed configuration?

[@itzgangbih3980]

Can you guys please add a polymer glock 19 holster for this light

[@WerkzHolsters]

We definitely want to add the Poly80 to our lineup. Hoping to do so before the year ends, but if you'd like, please request it here: werkz.com/new-holster-notification

[@daniielhatesbarney]

I’d buy it for the p80 for sure

[@WerkzHolsters]

Working on fleshing out the Glock holsters, then I'll experiment with the Poly80 items and see if I can get those done.

[@puertoricohh1037]

just put my order in about 4days ago for the w6 g19x baldr mini hlstr and mag pouch cant wait to get it! what is lead time? how long it takes before it gets shipped out?

[@WerkzHolsters]

Our lead times (expressed in business days) on the site and in your email are accurate. We are bringing on staff to help get us back to a short lead time. Thanks for your patience!

[@aarronher6369]

I got one for my G 45 with olight baldr pro, If you can make one that similarly designed for Owb, then I gonna buy again

[@richardjohnson447]

Send me the name of it cause I got the glock 45 9mm and the balder light pro in laser

[@T1374]

Do you offer similar/ compatible holsters for use with Glock 19 and the Olight Valkyrie PL-2?

[@grapplergirl10]

My same question

[@itzgangbih3980]

So will a p80 glock 19 fit in this... because I already ordered this and the mag attachment!! I also emailed asking the same question

[@williamrodriguez6694]

Can this fit an Olight Bald IR/RL? It looks like they are similar in size but not 100%

[@MrPoloman513]

Need with the Fn 509 with same light

[@Dtran086]

please make this in a OWB with ability to support safariland QLS. Need a holster for glock 17 with olight baldr pro

[@WerkzHolsters]

Hey Daniel, We offer OWB for Glock 17 with Olight Baldr Pro in our M7. Check it out! werkz.com/index.php/m6-glock-17-19-34-45-sized-pistols-olight-baldr-pro-right.html

[@vanilla-vice]

I'm assuming it works with the Baldr RL as well?

[@moose2934]

Yes

[@upallnighttmic2387]

Are these still available? If so how long is the shipping process I’m ready to purchase something on amazon but would rather support you since I have that exact setup & it looks like a solid product?

[@WerkzHolsters]

We do have them available. Lead time is 10-14 days at the moment. Follow the link in the description or go to werkz .com and use the holster finder.

[@MountnDewMe]

If I'm running a Springfield XD-9 4" with the Baldr RL, which holster should i look at? I tried your website, but the only springfield you have is the XDS 3.3.

[@WerkzHolsters]

We will resume building custom holsters in the next week (estimated). We do not have any quick ship holsters for your pistol with that light at this time, so it would need to be custom.

[@25DianaDrive]

Looking for a holster for a Ruger American (left handed) that can support PL-2. Got any ideas?

[@WerkzHolsters]

Sorry Franklin... due to the intensive nature of building our holsters for an exact & specific pistol & light combination, we have to focus on the most popular pistols and lights. We do not currently have the Ruger American with the PL-2 or PL-Pro. We may add it in the future, or if we resume building custom holsters some day, then we might be able to meet your need.

[@KingKie23]

Does it fit polymer 80 p940c?

[@WerkzHolsters]

No sir! The Poly80 pistols put the rail lower, which causes extreme tightness if you try to holster in a holster made for a Glock. I expect to swing through the P80s after I get done with about 5 more Glock designs.

[@josephsalazar2908]

Does this allow a compensator

[@WerkzHolsters]

The open-bottom versions of our holsters allow slide-profiled compensators. In other words, if the comp is wider or taller, or bigger in any dimension, than the slide, then the comp won't fit down the channel for the slide.

[@derrickshriver7642]

Glock 19 if I wanted to wear it for my right hand on the outside of my pants couldn’t I just bye the left handed holster?

[@WerkzHolsters]

Yes and no. First, we do have the M7 OWB holster which is made for OWB use, which provides the sweat shield on the proper side and includes better OWB belt attachment (plus ability to use Safariland attachments) and thicker Kydex. If you want to use a M6 OWB, you can purchase the opposite hand and use the clip as a "mini paddle" but the clip isn't optimal. Also note that left/right hand M6 holsters have a tall sweat shield, which may be obtrusive in a OWB solution. In sum, we recommend using the "correct" hand holster, and if we have one available, the M7 is a better OWB solution. Thanks for the good question!

[@davidaustin4407]

I own both a BALDR and BALDR Pro light. Is the holster the same for both lights or is the Pro model with green different?

[@WerkzHolsters]

David, great question. Unfortunately, the lights are different enough that the Baldr does NOT fit in the Baldr Pro holster. Sorry!

[@davidaustin4407]

@@WerkzHolsters Thanks for the clarification. I was hoping it would fit both lights but I really need the BALDR pro model anyway.

[@sargentsteel5090]

Can anyone tell me if these are comfortable. It looks like might hurt your junk

[@illuminatusquis5909]

Will this work with a threaded barrel and raised night sights?

[@WerkzHolsters]

Yes.

[@jasonellert7752]

Can you do one with this on the HK45

[@WerkzHolsters]

Jason, yes we can build anything, but we have to judge which designs we do next for the M6 and M7. The HK45 is just not a popular enough seller to build the holster specific to the Baldr Pro. We can build custom holsters for your combination, but I don't see the HK45/Baldr Pro as being popular enough for us to build M6 or M7 holsters any time soon. Hope that helps!

[@brandonaguinaga9361]

Will this fit with tp9 elite combat/baldr pro?

[@WerkzHolsters]

We do not yet have any holsters for the Canik. Those may come in the future.

[@israelcampos996]

Do u have a holster available for a p365 sas buldar mini

[@WerkzHolsters]

See 2:24 of: kzbin.info/www/bejne/p5iZpqN-gtt6lbc

[@Rain-Orca]

Can it accept suppressors?

[@jessiecuellar1419]

Will this fit and M&P 9mm 4.25?

[@Ok-551]

Will this for the Baldr rl?

[@WerkzHolsters]

Olight has many different "Baldr" options, including many different Baldr RL lights. Find out exactly which light you have, then go to werkz.com/ and input your pistol and light into our holster finder to see if we have a fit for you. Blessings!

[@fitdadexperiment-3eight797]

I know I ask this often but do you make these for the X300 or any plans to do so in the future? In the meanwhile will this fit a G19 with the Olight PL-2.?

[@WerkzHolsters]

Thanks for your support and thanks for the question. Right now I'm swinging through designing holsters for the Glock. Baldr Pro was just done. TLR-1 is next. Then x300. APL Gen3, APLc, TCM-550XL, Mini, Mini 2, and probably the Pl-2. I don't know if I'll build for the TLR3 or 4, since popularity of those has drastically dropped with the TLR-7 and TLR-8. As those get designed, we'll build the M6 IWB holsters (likely in Glock 19 length), and M7 OWB holsters (fit everything from Glock 19 length to 17l with a comp). If I can figure out a clean way to do it, I'll also try to design Poly80 in there as well. Then same thing with Sig P320...

[@fitdadexperiment-3eight797]

Werkz.Com thanks for the info! That’d be awesome if you come up with a holster for the P80 frames. I’m currently working on a PF940CL build and may put a comp on it... maybe not. But yeppers. I definitely love my Ambidextrous M6. I’ll keep checking back on your website for the additions to your lineup.

[@WerkzHolsters]

@@fitdadexperiment-3eight797 The PF940 is on our list. I actually have the scan of the PF940C with the TLR-1 overlayed with my Glock TLR1 holster design, and it just puts the light slightly lower.

[@seewhatisee2049]

What about the olight baldr pro r

[@downtownwilliebrown]

Will a CZ P10C fit in this holster? Can't find a holster anywhere with a baldr pro fit.

[@WerkzHolsters]

We don't mind supporting the CZ Pistols, such as the P10c; we have just released a holster for the P10c pistols with the Olight Baldr Mini. However, we don't currently have a holster for the CZ P10 with the Baldr Pro. And no, our holsters don't work with anything other than what is specified.

[@itzgangbih3980]

Your website won’t even let me order on it all it says is “PayPal gateway has rejected request. Billing address request is not enabled for merchant (#11601: Request for billing address failed).” And I’m paying with card so I’m confused

[@WerkzHolsters]

Thanks for letting us know! I've not seen that error show up before. If you have a chance, can you email us at [e-mail] ? We can discuss the problem further there and see if we can get it all fixed.

[@itzgangbih3980]

@@WerkzHolsters I was able to buy the holster after a couple of emails THANK YOU!! Great customer service

[@emmanuelvega4353]

Will you be offering this for the Glock 17 any time soon. I'm in the market for one

[@WerkzHolsters]

Yes, I need to get that done. I'm also going to build the left handed M7. Check back in a week with [e-mail] and we should hopefully have it by then.

[@alexanderg9356]

Anything for M&p 2.0 compact with pl pro olight!?

[@WerkzHolsters]

We are still working on fleshing out our Glock offerings with a large number of lights. Given the M&P 2.0 popularity, I don't expect to get to it until after we get through Glock and Sig Sauer. That is, unless we get a large order coming in for them. Sorry!

[@Covshooter556]

Werkz.Com any update here? M&P’s are quite popular. Obviously not as much as a Glock. (I personally don’t see why) I don’t don’t know why more companies take advantage of the M&P market.

[@bootybanditman]

Id like an m&p m2.0 holster with the baldr pro

[@recklezz7149]

Did you have to swap the gl rail to the 1913 one ?

[@WerkzHolsters]

The Baldr Pro and Glock are each as delivered by the respective factories. Hope that helps!

[@recklezz7149]

@@WerkzHolsters Okay appreciate it

[@RhinoDigitalMediaIncDublin]

Will this configuration work with Glock 19x9?

[@WerkzHolsters]

Yes. I think the video thumbnail shows the Glock 19x.

[@alext9230]

anything for a cz p10c optic mount? I know some g19 fit for p10

[@WerkzHolsters]

We do make a M2 for P10C with Inforce APLc. werkz.com/index.php/quick-ship-holsters.html?pistol_man=7 Our Kydex fits so tightly that you cannot put a P10C with a light into one of our Glock 19 holsters. We do expect to continue building our our mold selection including supporting more CZ products in the future, but it's going to be a little while before we get those molds built. In the mean time, we do make custom holsters for the P10C. werkz.com/index.php/custom-pistol-holsters.html

[@javic6316]

Will this fit the baldr pL-2 RL on a glock 19 gen 5

[@WerkzHolsters]

Unfortunately, not. The PL-2 Baldr has a larger laser module hanging off the bottom which will make it not fit in this holster.

[@brianmgregory857]

I got g17 gen 5 valkrey 1// will it work

[@WerkzHolsters]

Unfortunately, we do not support the original Olight PL-Mini. Your original PL-Mini will not work in this holster.

[@walterlangkowski4723]

Running a comp this unfortunately won’t fit

[@WerkzHolsters]

We support slide profiled compensators with specific holsters -- such as the ones with drop through capability.

[@walterlangkowski4723]

@@WerkzHolsters I was think if not it could be modified a tad bit, I’ll have to check out your website. Need a spare mag pouch also

[@walterlangkowski4723]

@@WerkzHolsters I notice me your M6 IWB has 4 holes for an accessory do you make the spare mag holder that marries up to it?

[@santosurbina8704]

Why can't I order one anymore?

[@WerkzHolsters]

We had a website glitch; please try again.

[@braydenobryan9959]

Your holster is scraping your gun😐

[@nvrlft2842]

g17?

[@WerkzHolsters]

We have the OWB version, but not yet on the IWB: werkz.com/index.php/m6-glock-17-19-34-45-sized-pistols-olight-baldr-pro-right.html

[@LîNkxUSMC]

@@WerkzHolsters says page not found, any new link? Need this for my gen 5 17 mos

[@indicastrain4127]

Thumbs down. No CZ holsters

[@WerkzHolsters]

Not right now, sorry! We do plan to add in the future for the P10 family, plus maybe something else.

[@WerkzHolsters]

@PalealYah Bayn Yisra'el Yes we do have a mag carrier that can attach to the side. I think the mag carrier design can use improved attaching system for the M6, but even as it is, it's a pretty solid piece. werkz.com/index.php/m6-magazine-carrier-for-glock.html